Used Spänex Filter System for sale (41,034)

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning, in very good condition. Lrsdpfx Aofg Iphofwer Filter area: 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan, drive power: 22 kW; volume flow: 6700 m³/h; pressure: 8000 Pa Compressed air valves: ASCO 24 Volt Number of filter pockets: 48 Filter medium: no longer available Insulation: Yes With differential pressure measurement Dimensions L/W/H: 3000 mm / 1700 mm / 2100 mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Also available: Stainless steel cooling screw conveyor, diameter 400 mm, length 4100 mm.

Condition: good (used), Year of construction: 1986, Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Centrifugal fan, chip extraction fan, fan, suction, chip fan -unfortunately no funding data available Ledofxx Nnepfx Afworr -Motor: MEZ type 4AP80-2 -Motor power: 1.1 kW -Speed: 2840 rpm -Connection input: Ø 60 mm -Outlet connection: Ø 400 mm -Base: on castors -Dimensions: 940/540/H1510 mm -Weight: 74kg

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete Lredpfxew Ivrwe Afwjr essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: good (used), Year of construction: 2008, functionality: fully functional, A weighing system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. Ljdpfjzaw Nusx Afworr Overall footprint of system (in current setup) - 3.7m long x 2m wide x 3.4m high.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Lsdew Ivr Dspfx Afwerr Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Ledpslxyhfefx Afwjrr Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Ledpfx Aey Eg Dyefwjrr

Condition: used, Spänex SP 315 KC 3.1 radial fan for the efficient extraction of swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or in small machine fleets, and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: - Air flow rate: approx. 6,400 m³/h - Motor power: 15 kW - Connection diameter: 320 mm Ljdpfxszrypgo Afworr

Condition: new, Year of construction: 2025, machine/vehicle number: 011/2020, STK-10000i is low-cost vacuum system from SAF TEKNIK and it offers very good filtration with a lot of power and airflow! It includes multiple filter columns and filter cleaning through vibrating. It also has a separator for bigger parts, which prevents damage to the whole system. TECH. SPECIFICATION: - Motor power: 11 KW - NEW: Frequency inverter for main motor - Exhaust capacity: 10000 m3/h - Air speed: 41 m/s - filter area: 30 m2 - bin volume: 810 Liters - exhaust inlet diameter: 355 mm Lredpfx Asf D S Trefwer - weight: 740 kg - dimensions: 3170 mm X 1200 mm X 2330 mm OTHER VERSIONS, also available: - STK-6500 (6500 m3/h) - STK-8000 (8000 m3/h)

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Lodozp E T Sjpfx Afwjrr Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Lrodpfexf Uuksx Afwjr Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Lsdpfx Aovxk Ansfwerr Storage location: Nattheim

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9% Lrsdpfx Afsw Ivrqewjr

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational. Lrjdpfx Afsy Hlvwower

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Lredsxd Thmepfx Afwer Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. Lrsdpfewc Nrnjx Afwsr The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Lredpfx Afoy Hlkbewjr Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Lrsdpfx Aexri T Uofwor Connection: 400V, 1.5KW Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Ljdport H Izefx Afwjrr Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Lrjdpozmy Aiefx Afwjr

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes Lsdpfxoyc H N Ns Afworr • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Lrodpfx Aszvp Uyofwer

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, volume flow: 3.2 m³/h, filter area: 21 m², noise level: 67 dB, total height: 2,000 mm, total length: 2,360 mm, total width: 900 mm, overall weight: 770 kg, compressed air connection: 6 bar, extraction nozzle diameter: 200 mm, The SPÄNEX dust extractor type SMU 32 / 45 BA with container and discharge is a compact disposal station for disposal station for commercial use for installation in the work area. Consisting of: Dust extractor with vacuum-proof housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, high-performance radial fan arranged on the clean gas side with centrifugal fan with three-phase motor of energy efficiency class IE3 and integrated exhaust air sound attenuation and air outlet grille, charging container with 0.55 kW discharge device, a circuit with CEE appliance plug (phase inverter). The circuit is designed for automatic operation. The automatic start-up control for max. 6 machines and automatic cleaning of the filter with runtime addition are included. For the coils or potential-free contacts of the machine can be used for automatic start-up. can be used. Optionally possible: Ledst Ug Sgspfx Afwerr Conversion to chip collection container € 1,270.00 net alternatively: Installation of a branded rotary valve € 1,690.00 net

Condition: good (used), Filter system, clean air filter Lsdeb A Shuspfx Afwerr -Built-in, adjustable fan -Aluminum case -Volume flow rate: 1060 m³/h -Number: 3x blowers available -Price: per piece -Dimensions: 560/1160/H340 mm -Weight: 20 kg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Lredozqc U Nopfx Afwjr Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line