Used Spectro Ciros Vision Ccd for sale (439)

Condition: used, mileage: 33,656 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263335 Former non-binding recommended retail price of the automobile manufacturer: 85,917 € 1st owner, accident-free, service book maintained, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Auxiliary electric heater * Charging package, instrument panel * Loading compartment package 2 * Smoker package ASSISTANCE SYSTEMS * Mercedes-Benz emergency call system * Breakdown management * ECO start-stop function * TEMPOMAT (cruise control) * Driving light assistant * Rain sensor * ATTENTION ASSIST * HOLD function * Active brake assist * Blind spot assist * Traffic sign assist * Active lane keeping assist * Parking package with reversing camera * Crosswind assist ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * Communication module (LTE) for digital services * MBUX multimedia system INTERIOR * Coat hooks in the cab * Interior light(s) for driver/passenger compartment with door contact * Tie-down rails on side wall at roof frame * Loading compartment lighting with motion sensor * Grab handles for entry for driver and front passenger * Grab handle for entry into loading compartment sliding door on partition * Semi-automatic controlled TEMPMATIC air conditioning * USB socket 5 V * Entry handle on rear left corner pillar * Climate zone 1 (cold/comfort) * Entry handle on rear right corner pillar * Wooden floor * Tie-down rails on side wall at beltline Kdodpfozwkbwjx Acpeu * Multifunction steering wheel * Seat heating for driver * Seat heating for front passenger * Load securing rail system * Storage compartment above windshield * Pre-installation of electrical system, configurable special module * Fabric Maturin black * Cup holders in front * LED light strip in the loading compartment * Comfort roof control unit * Airbag driver * Airbag front passenger * Comfort driver's seat * Front passenger seat, two-seater * Comfort headrest driver * Partition wall, full height * Speedometer km/h * Steering wheel adjustable for inclination and height * Leather steering wheel * Cable duct on side wall * Storage compartment under cockpit * Cable duct on rear portal LIGHT & VISION * 3rd brake light * Adaptive brake light TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Jump-start contacts * Seatbelt warning system for front passenger seat * Seatbelt warning system for driver's seat * Outside temperature indicator * Seat occupancy recognition for driver's seat * Anti-theft and intrusion alarm system EXTERIOR * Rear doors, double-leaf, opening to side wall * High roof * WET WIPER SYSTEM * Rear door step * Sliding door, right * Lateral marker lights * Exterior mirrors, electrically folding * Heat-insulating glass with band filter on windshield * Exterior mirrors, heated and electrically adjustable * Towing eye, rear * Acoustic package * Interior paneling loading compartment up to roof height (wood) OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * without uprating/derating 3,500 kg * Panel van * 3.5-ton vehicle * Wheel arches, loadable * Fleece battery 12 V 92 Ah * Exit lights * Front axle with increased load capacity * Electrical system for trailer socket * Additional structural modifications * Generator 14 V / 250 A * Signage/printed materials, German * Basic * Noise reduction measures * Vibration dampers * Vehicle suitable for HVO fuel * Head unit, Europe/CIS/Mongolia Further features * Wheelbase 4325 mm, short o

Condition: new, mileage: 100 km, power: 350 kW (475.87 HP), fuel type: electric, overall weight: 18,000 kg, color: white, gearing type: automatic, emission class: euro6, Equipment: electronic stability program (ESP), navigation system, Vehicle number: 550041 accident-free, fully serviced according to maintenance schedule, non-smoking ---- ASSISTANCE SYSTEMS * Lane change warning system LIGHT & VISION * High beam assistant EXTERIOR * Exterior sun visor Other features -----Color/Paint----- Chassis color: Anthracite Gray * Cab color E1980WHTE CRYSTAL WHITE * Lower step, cab: Crystal White -----Tires/Wheels----- Goodyear * RR, not applicable * Front axle(s): 385/55R22.5 * Alu Alcoa Dura-Bright 32 mm * F1, 385/55R22.5GO AFMAXS 160/000 K Steering ABA * R1, 315/70R22.5GO EQMD 154/150 L Traction BBB 3P -----Equipment/Special equipment----- Adaptive Cruise Control with FCW and AEBS-3 * Electric vehicle * Rear axle ratio 2.38 * Wheelbase 3.90 m / rear overhang 0.99 m * Standard component arrangement * Batteries in rear overhang, no spare wheel holder * Standard warranty 1 year, 2nd year DL 1 year PH * Sleeper High Cab Kodpfx Acjyltkfspsdu * Chassis front design: Aero base plate * Air-suspended cab * Signal horns, 2 sets * LED headlights, cornering and fog lights * Headlight washer * Headlights with height adjustment * LED skylights * Two LED headlights for cab rear wall * Handle & Trim: Black, Wall: Darkened/Window * Windshield with sun protection film * Laminated glass with sun protection film * Digital vision system by DAF * DAF Corner View * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler, short, Sleeper High Cab * Side fenders, one side foldable * Steering wheel, leather * Dashboard design: Plateau * Cab, interior trim: Argenta * Door panel: Loosely woven fabric * Driver's seat: Super Air * Armrests on both sides of the driver's seat * Passenger seat: Cinema with Alcantara upholstery * Passenger seat: Cinema with Alcantara upholstery * Cooler box or refrigerator * Xtra Comfort mattress + topper under bunk * Luggage compartment * Safety net on both bunks * Curtains with separating curtain * LED interior lighting: Luxury * Automatic cab climate control * Roller blind, passenger side * Sunroof with electric operation * Auxiliary power supply: Standard + 2x 40 A * ECAS remote control with extended functions * PACCAR Connect with navigation and tablet software * Preparation for toll system * Digital tachograph, VDO 1C, version G2V2 * Infotainment including DAF Truck Nav., tablet preparation * Speakers: Exclusive * Antennas: Radio, 2x mobile, GNSS Extra: CB * Predictive Cruise Control * Wireless charger * Airbag (driver) and 2 seatbelt pretensioners * Rear warning system * Front: 9.00 t, parabolic, 183N * Axle load monitoring * E-motor EX-D2 350 kW Cab emblem: 350E * Charging with 325 kW DC * Mechanical differential lock * Parking brake assistant * 5 HV battery packs: Under cab, L1+L2+R1+R2 * Air reservoir made of aluminum * Catwalk with step, long * One wheel chock * SAF S36-20, cast iron, 150+40mm, low maintenance * Chassis protection bar * Hard-wired body signals and warnings * ECAS control * Preparation for aftermarket switches * CAN J1939 functions in body connector * Additional connector, lighting, chassis * E-PTO socket 650 V DC < 90 kW * ePTO control when ignition is ON * Batteries 2 x 210 Ah AGM * Additional cab insulation * Safety package NGD * Executive package XD/XF * Climate package ---- Subject to prior sale and errors. The vehicle description is for general identification of the vehicle and does not constitute a guarantee in the legal sense. For the exact scope of equipment, please refer

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: cooling unit, documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Ksdpfxjy Ed S Ij Acpsdu Autofocus height control system Hörbiger laser gas system 2 CCD cameras Teka extraction unit ECO-Cube

Condition: excellent (used), Year of construction: 2021, FANUC ROBOCUT C400iC wire EDM machine + FANUC CRX-10iA robot, manufactured in 2021. FANUC 31i-WB CNC control. X, Y, Z LINEAR SCALES. AUTOMATIC DOOR. FANUC ROTARY TABLE. CHILLER UNIT. Travel: X 400, Y 300, Z 255, U +60, V +60 mm. Maximum taper 30°/80 mm. Maximum dimensions of the part to be machined: 730 x 585 x 250 mm. Maximum weight of the part to be machined: 500 kg. Wire spools up to 16 kg. Wire diameters: 0.10-0.30 mm. FANUC CRX-10iA ROBOT. Kedpfez Hw Hcjx Acpsdu VISION SYSTEM. 6 controlled axes. R-30iB Plus controller. Maximum load: 10 kg. Maximum arm length: 1,249 mm.

Condition: like new (used), Year of construction: 2019, Type: QV AKTIVE 202 Model: QV-L202Z1L-D Range (X, Y, Z axis) with Vision Head: 250 x 200 x 150 mm Max. table load: 10 kg Resolution: 0.1 μm Illumination: (White LED) • Contour • Coaxial • 4-quadrant ring light Magnification system: Zoom optical system with 8 positions, standard 1.5X magnification lens Sensor type: High-resolution CMOS color camera Additional lenses: 1X and 2X magnification Accuracy: E1 (x, y) = (2+0.3 L/100) μm E1(z) = (3+0.5 L/100) μm Kdjdpfx Acoxztgkspsu E2 (XY) = (2.5+0.4 L/100) μm L = measured length (mm)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, EDF Flexy Feed Prefeeder Casemaker EDF 821 FD Full Servo Swing no crash feeder N. 6 colors flexo printing units from top, fixed type (they can be opened for maintenance) Kjdpfx Aewhy Abocpodu N. 6 infrared dryers Vacuum transport between printing units made by steel platform and belts Double-shaft slotting unit Rotary die cutter with upward disengagement for die cutting replacement when machine is running Stripper transfer unit before folder gluer Folder gluer vacuum transfer full servo controls Valco clear vision gluing unit Counter ejector EDF Unipal palletizer with automatic sheets and pallet inserter Siemens Electronics Available August 2027

Condition: new, Year of construction: 2026, laser power: 12,000 W, LASER FIBER 12 kW SERON – POWERFUL PERFORMANCE | 210 m/min | READY FOR PRODUCTION | AVAILABLE IMMEDIATELY | FAST DELIVERY Are you looking for a machine that will truly increase your production and reduce costs? The Seron FiberCut 12 kW laser cutter is the solution for companies that refuse to compromise. ✔ Extreme cutting speed up to 210 m/min ✔ Perfect edge quality – no additional finishing required ✔ Repeatability of 0.01 mm ✔ Maximum efficiency with uncompromising precision This is not an “ordinary laser” – it’s a premium-class production machine, ready for high-performance operation. KEY SPECIFICATIONS: Working area: 1550 x 3050 mm Power: 12 kW (Maxphotonics) Precitec Procutter head (autofocus / automatic nozzle distance control) Kjdox Rcgbspfx Acpjdu Bosch Rexroth linear drives Acceleration: up to 2G Max speed: 210 m/min Pallet exchange system – continuous operation without downtime Bosch Rexroth control system (remote service, complete process control) ADVANTAGES OVER THE COMPETITION: - Monolithic, stress-relieved frame = years of precise operation - Lightweight and rigid gantry = greater dynamics and efficiency - Vision system (2 cameras + monitor) = complete production oversight - Fully enclosed housing + safety curtains Machine ready for operation – demonstration and testing possible. Contact us now – unit available immediately.

Year of construction: 2009, condition: ready for operation (used), table load: 20 kg, Optical measuring machine manufactured in 2009. This TESA visio 300 dcc features a measuring range of 300 mm in the X-axis, 200 mm in the Y-axis, and 200 mm in the Z-axis. It includes a high-resolution CCD camera and interchangeable zoom optics for enhanced measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA visio 300 dcc machine we have for sale. Contact us for further details. • Usage: Laboratory environment • Calibration: Regularly calibrated; last calibration in 2025 • Measuring range (approx.): • X-axis: 300 mm • Y-axis: 200 mm • Z-axis: 200 mm • Accuracy: • Measurement resolution: up to 0.5 µm • High repeatability in the micron range • Optical system: • High-resolution CCD camera • Zoom optics / interchangeable lenses (depending on configuration) • LED illumination: top and bottom (surface and contour lighting) • Table: Kdjdpfx Aceyn Efyspou • Granite measuring table • Power supply: 230 V / 50 Hz Additional equipment • PC-DMIS software (license included on USB dongle)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,520 h, overall weight: 235 kg, total height: 1,055 mm, number of axes: 3, This 3-axis Trotec Speedy 360 was manufactured in 2019, featuring a robust CO₂ laser system with a power range of 40-120W. It offers a maximum working area of 32 × 20 inches and supports a variety of materials with its multifunctional table options, including a vacuum table and honeycomb cutting tabletop. Ideal for precise cutting and engraving, this machine includes JobControl® Expert Software for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the Trotec Speedy 360 machine we have for sale. Contact us for further details regarding this machine. Additional equipment • Autofocus: Light Bar Focus (electro-optic) • Positioning: Laser pointer (655 nm, Machine Benefits Technical Machine Benefits • Ergonomic access to working area • Coaxial air assist • Optional features: protection kit, air assist, rotary attachment, jobcontrol® vision, vacuum table, honeycomb cutting tabletop, specialized cutting tables • Exhaust system: surface exhaust via rear of the engraving cabinet, table exhaust with vacuum and cutting table • Laser safety: classification: cdrh laser safety, ce tested, laser class 2 • Laser safety: safety features: duplicate interlock system, front-side loading lid • Temperature: +15°c to +25°c • Humidity: 40% to max. 70% (non-condensing) • Dust-free environment: 2nd degree per iec 60947-1 Extra Information Movement Working Area: 813 × 508 mm Loading Area: 890 × 600 mm Max. Workpiece Height: With working table: 210 mm Without working table: 280 mm Motion System Speed: 355 cm/sec Acceleration: 5g Workpiece Max. Material Load: Static: Up to 100 kg Dynamic: Up to 30 kg Table Working Tables: Standard: Ferromagnetic engraving table Optional: Multifunctional table system and Honeycomb cutting tabletop Tools Lenses: Standard: 2.0" Optional: 1.5", 2.0" clearance lens, 2.5", 4.0" Dimensions Machine Depth 1221 mm Ksdpsx U Th Refx Acpsdu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Automatic Desiccant Cap Dosing and Assembly Line – REBEL RV5959 (Year 2012) This fully automated line receives unprocessed plastic caps and converts them into functional caps with integrated desiccant for containers requiring controlled humidity. Designed for pharmaceutical, nutraceutical, cosmetic and food industry applications. The system integrates the following operations in a single line: • Cap feeding • Punching and insertion of cardboard barrier discs • Precise dosing of heated silica gel • Thermal and anti-static control Kedpfx Aex Hh R Rscpodu • Insertion of inner plastic seal • 100% inspection by machine vision • Dynamic weighing and automatic rejection • Final accumulation on rotary carousel • Dual-lane production • Multi-station servo-driven rotary carousel The line is equipped with: • 2 stainless steel feeders + conveyor systems • Dual external support for cardboard reels • Industrial aspiration/extraction unit • Servo-driven rotary table • Complete VARPE V2000 checkweigher with rejection system • Six-position outfeed carousel • 5 Basler cameras + Cognex VisionPro software • Heated silica dosing hopper • Anti-static ionizing unit • 24 high-precision volumetric dosing chambers • Electrical cabinet with PLC, HMI and industrial PC • Integrated dehumidification system

Condition: used, Year of construction: 2011, functionality: limited functionality, machine/vehicle number: 782, Technical characteristics: Measuring Capabilities - Measuring range (Z-axis): 600 mm (≈ 23.6") - Measuring range (X-axis): 200 mm (≈ 7.8") - Max. tool diameter: 400 mm (≈ 15.7") - Snap gauge diameter: Up to 100 mm (optional) Performance Features - Spindle type: High-precision SK50 spindle with integrated calibration surfaces - Spindle locking: Power-operated brake with 4 × 90° indexing - Image processing: ZOLLER »pilot« software (version 3.0) - Camera: CCD with telecentric lens and 20× magnification - Cutting edge detection: Automatic, including edges >90° Kedpfxeyanf Ts Acpodu - Focus system: Analog focus display with dynamic cross hairs Control & Interface - User interface: Touchscreen with graphical guidance - Manual control: Ergonomic »eQ« single-hand operating handle - Fine adjustment: Electronic control for X and Z axes - Data transfer: RFID tool identification, label printing, and CNC integration Construction & Environment - Frame: Lightweight metal with optimal thermal conductivity - Scales: Heidenhain glass scales for high measurement accuracy - Software options: Tool management, adapter calibration, concentricity/run-out programs - Mounting/Measurement interfaces: # HSK63 # HSK100 # ISO40 # ISO30/BBT30 # BMT55 Machine status: FUNCTIONAL in manual mode only. For optimal performance, overhaul by the machine supplier is recommended.

Condition: new, Year of construction: 2025, functionality: fully functional, Robotic Case Packing Station for Display Cartons The offer does not include implementation, installation, and transport. Automated packaging line designed for packing products into display cartons and plastic E2 containers. The machine is brand new (post-production tests completed). Operating Description: Automatically picks, glues, and forms cartons, placing them onto a conveyor. Products are identified by a Keyence vision system on the input conveyor. An advanced line-tracking system calculates the precise pick location for one of the three FANUC M3IA6S delta robots. Vacuum gripper-equipped robots accurately place products into cartons, automatically queuing them. A FANUC LRM200ID (6-axis robot) automatically places lids onto cartons. The completed carton is sealed by a Nordson system and exits the machine. Quick automatic changeover capability to E2 plastic containers (changeover time less than 1 minute). Kdsdjwmm Tdspfx Acpsu Technical Parameters: Carton forming: 6-7 pcs/min. Product packing rate: 100-110 packs/min (carton or E2) Changeover between carton types: under 5 min (with operator) Changeover carton ↔ E2: under 1 min (fully automatic) Equipment Specification: Delta robots: 3 × FANUC M3IA6S 6-axis robot: FANUC LRM200ID Control system: Allen Bradley GuardLogix 5380 PLC Servo drives: Kinetix 5100, Kinetix 5700 Pneumatic and gantry drives: FESTO Motor drives: NORD Safety: Magnetic safety locks Keyence GS-M Vision system: Keyence monochrome camera 2 MPX, ring lighting Sealing system: Nordson MELTER PBF240 Operator panel: Allen Bradley PanelView 5510 (19", color) Structure: Modular stainless steel (easy transport and installation) Machine available immediately, brand new equipment. Tests and adaptation to specific product requirements are possible. Price does not include installation or product-specific adaptation costs. The featured video of the machine's operation shows the previous model.

Condition: used, Year of construction: 2018, Year: 2018 Condition: very good Multifunctional finishing machine for digital printing Configuration: - CCD camera - 6 rotary knives Kedpfjww Etqjx Acpedu - cross cutting unit - creasing unit - RTM - automatic perforating and scoring unit - PC ALL in one - SW jobcreator

Condition: ready for operation (used), Year of construction: 2020, laser power: 54,000 W, number of axes: 3, This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details. • Cutting technology: High Definition Plasma • Tube capacity • Max tube length: 8,000 mm • Min/Max tube diameter: 100 mm / 750 mm Kdjdpfx Aoy Ephaocpju • Min/Max wall thickness: 3 mm / 20 mm • Cutting capabilities • Straight cutting, bevel cutting, V bevels, Y bevels, 3D tube cutting • Axis configuration / movements • X (longitudinal): Double synchronized brushless drive with electronic axis control on both sides of the gantry; guide length 11,000 mm; double motorization • Y (transversal): Brushless drive with rack and pinion transmission • Z (vertical): Motorized torch positioning axis, speed up to 4,000 mm/min • Tube rotation axis: Synchronized spindle for tube rotation, tube length up to 8,000 mm • Bevel head – VBA WRIST • Rotation: ±540° • Tilt/bevel adjustment: ±60° • Cutting bevel angle: ±45° • Max tilt speed: 38°/sec • Tangential control during cutting • Arc-voltage torch height control • Mechanical feeler torch height control for bevel cutting • Torch collision protection • Machine construction • Heavy-duty machine frame • Longitudinal and transversal precision guides • Precision rack & pinion drive system • Brushless motors • Chuck / spindle • Synchronized spindle for tube cutting • Chuck size: 500 mm • Through hole: 150 mm • Tube supports • 3 manual support carriages with trapezoidal screw positioning • Plasma generator • Model: ESAB iSeries300i • Max current: 300 A (range 5–300 A) • Output voltage: 180 V • Power supply: 380 V / 50–60 Hz • Duty cycle (40°C): 100% • Maximum output power: 54 kW • Process gases • Plasma gases: Air / O2 / Ar-H2 / N2 • Shield gases: Air / N2 / O2 / H2O • Generator dimensions • 1219 x 898 x 1031 mm • Control system • ESAB VISION T5 CNC • 18.5” colour touchscreen, glove operable • OpWizard operator assistance software • Software • ESAB Tube Cutting Programming Software Additional equipment • Flat cutting table with slats, 1,500 x 1,000 mm

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Kedpfxozv Idts Acpedu Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" Kodpfozbub Djx Acpedu • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: good (used), Year of construction: 2021, Manufacturer: Duplo Model: PFi Blade B3+ Year: 2021 Incoterm: FCA, Germany (free loaded onto truck) FGT Condition Rating: ★★★★★☆ (9/10) _____ Why this machine is interesting The Duplo PFi Blade B3+ is a compact and highly versatile digital cutting table designed for short-run and on-demand production. It combines cutting, kiss-cutting, and creasing in a single operation, making it ideal for packaging prototypes, labels, greeting cards, folding cartons, and digital print finishing without the need for conventional dies. Its CCD camera registration system ensures excellent accuracy, while the automatic feeder allows for efficient unattended production. _____ Technical Data • Working size: 210 × 297 mm up to 400 × 600 mm • Material thickness: up to 1.3 mm • Paper weight: 120 – 400 g/m² (depending on application) • Cutting speed: up to 800 mm/sec • Cutting accuracy: ± 0.3 mm • Tungsten steel cutting blades • 3 tool heads: Cutting, Kiss-Cut, and Creasing • CCD camera registration system • Automatic pile feeder with 5 combined suction heads • Feeder capacity: 100 mm • Power supply: 220 V / 50 Hz / 20 A • Connected load: 4 kW • Dimensions (L × W × H): 2,540 × 810 × 1,060 mm _____ Included Equipment • PC with monitor, keyboard, and mouse • Cutting and control software • Permanent transferable software license • CCD camera registration system • Three tool heads (Cutting, Kiss-Cut, and Creasing) • Complete tool holders and accessories • Assorted spare blades • Operating manual and technical documentation • Data backup available • Separate vacuum table compressor included _____ Availability • Immediately available • Machine under power Kedpjznun Ajfx Acpsdu • Demonstration possible by appointment _____

Year of construction: 2020, condition: good (used), functionality: fully functional, DESCRIPTION/FEATURES: 5-color offset printing press for labels, with an inline flexo unit and die-cutting. Kdedjzrxdpopfx Acpou The machine is equipped with: • Unwinding unit • BST web guide • UV LED drying (5) • Turning bar • Offset units: 5 • Flexographic unit • BST registration camera • Automatic washing system • for ink rollers • Automatic plate loading system • Semi-rotary die-cutting unit with magnetic cylinder • Rewinding unit with slitting (blades) • (shearing) • Inking console + CIP 3 for automatic color adjustment • Cooling unit for ink fountains • CCD plate punching table • Automatic registration

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000S Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm incl. option KIT 50 Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER handheld control box for convenient setup VISION 5 control system 15" LCD color screen, jog shuttle and mouse Incl. AGIESETUP 3D Incl. Conic-Plus option for improved taper Kdodpfjzlx A Sjx Acpju Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We will gladly perform an individual test cut. We also offer commissioning and training on-site for this machine.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 350 h, overall weight: 2,359 kg, input voltage: 400 V, For sale is a high-quality, professional Just Laser core laser with 400W CO2 laser power. This machine is ideally suited for precise laser cutting and engraving in a wide variety of materials. Ksdpsznbzvefx Acpsdu The system is in very good condition and has seen little use due to its low operating hours (approx. 400 hours). It is ready for immediate use. The system features 2 cutting heads for the most precise results: 1. Standard laser head for cutting wood, MDF, HDF, plywood, solid wood, acrylic, leather, cardboard, many plastics, etc., and engraving wood, glass, leather, textiles, rubber, melamine, cardboard, acrylic, ceramics, and many plastics. 2. Metal cutting head with automatic height adjustment for steel, aluminum, copper, and brass. 3. K-Vision camera option Table size: 2540x1320 The system also includes: * 5 kW frequency-controlled extraction system * Activated carbon and cartridge filters * 5 kW Mark screw compressor Inspection is possible by appointment. Cutting thickness: up to 24 mm for wood, 3/4 mm for steel sheet. According to the manufacturer, it is the fastest large-area engraving machine on the market, with a speed of 3.8 m/s.

Condition: used, Electric forklift LINDE, model E25L-01 Serial number: H2X387D01930, Year of manufacture: 2013 Load capacity: 2500 kg Lifting height: 4700 mm Fork length: 1600 mm Fork carrier width: 1150 mm Overall height: 2200 mm Operating voltage: 80 volts - Triplex full-vision mast with 1500 mm free lift - 2x auxiliary hydraulics on the fork carrier for attachments - Battery pack HOPPECKE, type 5HPZS 575, 80 volts, 575 Ah (New battery from 2019) - Automatic charger INDATRON, type D80 volts / 80 amps (New) - 4-wheel superelastic, solid rubber tires, front 225/75-10, rear 200/50-10 - Operator's protective cabin with heater - Hydraulic power steering - 2 LED work lights in front - 1 LED work light in rear - 1 LED Blue Spot light in rear - According to the operating hour meter, 15,995 operating hours - New TÜV/UVV inspection Length without forks: 2500 mm Overall width: 1150 mm Kodpfx Ajd Rmx Nocpjdu Own weight: approx. 4700 kg Good condition

Condition: new, Year of construction: 2024, SCHORR electric low lift pallet truck model RR15NHE for loads of up to 1,500 kg -- Low-maintenance and smooth-running -- Includes 2x 12V 75Ah lead-gel battery -- Integrated charger (230V) -- Polyurethane tires: Durable and abrasion-resistant -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! SCHORR ELECTRIC PALLET TRUCK 1500KG The SCHORR electric low lift pallet truck has a load capacity of 1500kg. The forks have a length of 1150mm and are therefore ideal for one-way pallets and Euro pallets. The speed can be controlled steplessly with both hands using a toggle switch on the tiller. When the toggle switch is released, the pallet truck brakes automatically. The pallet truck travels at a maximum speed of 4.5 km/h. The Euro pallet / load is also lifted by pressing a button on the tiller. The built-in 2x 12V gel batteries with a capacity of 75Ah are maintenance-free. Charging the battery is extremely easy thanks to the integrated charger. You can charge the pallet truck directly at a conventional 230V socket. The low lift pallet truck can be operated intuitively using the built-in tiller. The control instruments such as the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. The SCHORR low lift pallet truck also has various travel programs. In addition to the normal transport speed of approx. 4.5 km/h, there is also a "creep mode", which allows you to control the pallet truck very precisely and safely. This makes the SCHORR electronic pallet truck perfect for use on trucks as well as in warehouses. TECHNICAL DATA: Load capacity: max. 1500kg width: 560mm Kodpfx Aemv Eh Escpjdu length: 1624mm Height: 1174mm Size of the drive wheels: 210mm Turning circle: 1440mm Weight incl. battery: 230kg 2x 12V 75Ah lead-gel battery Whether you want to have the pallet truck delivered or pick it up from us on site in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and inspections as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: new, Year of construction: 2024, fuel type: electric, SCHORR electric pallet truck with free lift 1200kg load capacity -- The following lifting heights are available (2500mm / 3000mm / 3500mm) -- Ideal for low ceiling heights -- Mast only extends from the height of the mast (FREELIFT) -- Fully electric & self-propelled with various driving modes -- Incl. 24V 100Ah gel batteries (maintenance-free) and integrated charger Kdsdsmv Ek Iopfx Acpsu -- High-quality CURTIS control unit (waterproof) -- Polyurethane tires: durable and abrasion-resistant -- Various riding programs (incl. "Turtle" / "Slow mode") -- Safe stand thanks to electromagnetic brakes -- High-performance hydraulic pump With its free lift, the high-lift truck is particularly suitable for warehouses and rooms with low ceilings. The mast only extends from the height of the mast and thus enables safe and effective working in confined spaces. Depending on the version selected, it can reach a lifting height of 2500 mm to 3500 mm. Prices depend on lifting height / variant: 2500mm lifting height: 3199€ 3000mm lifting height: 3219€ 3500mm lifting height: 3239€ The forks have a standard Euro pallet dimension (fork length of 1150mm). The two built-in 12V gel batteries with a capacity of 100Ah ensure a long running time of up to approx. 4 hours. Charging the pallet truck is easy: simply plug it into a conventional 230V socket and the pallet truck is ready for use again in no time. The pallet truck has a high-quality CURTIS control unit, which is waterproof and can therefore also be used in damp or cool rooms for short periods. The high lift pallet truck can be operated intuitively using the built-in tiller. The control instruments such as the battery charge indicator, the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. In addition to the normal transport speed of approx. 4.2 km/h, it also has a "creep mode". Creep mode enables slow and precise movement, allowing the operator to maneuver even in the narrowest aisles and shelves. Technical data: Load capacity: 1200kg With free lift Lifting height: 2.5m / 3m / 3.5m (depending on selected version) Motor power: 750W Weight: 465kg Lifting speed: -- with load: 83mm/s -- without load: 136mm/s Lowering speed: -- with load: 112mm/s -- without load: 98mm/s. Climbing ability: -- with load 6% -- without load 8% Turning radius: 1366 mm Whether you want to have the pallet truck delivered or pick it up from us on site in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and viewings as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: new, Year of construction: 2024, fuel type: electric, New goods - 3.199€ excl. tax - Incl. shovel set - Shipping possible - Available immediately SCHORR electric high lift pallet truck with free lift 1200kg load capacity 2.5m lifting height -- Ideal for low ceiling heights -- Mast only extends from the height of the mast (FREE LIFT) -- Fully electric & self-propelled with various driving modes -- Incl. 24V 100Ah gel batteries (maintenance-free) and integrated charger -- High-quality CURTIS control unit (waterproof) Kdodsmxkhdjpfx Acpsu -- Polyurethane tires: durable and abrasion-resistant -- Various riding programs (incl. "Turtle" / "Slow mode") -- Safe stand thanks to electromagnetic brakes -- High-performance hydraulic pump With its free lift, the high-lift truck is particularly suitable for warehouses and rooms with low ceilings. The mast only extends from the height of the mast and thus enables safe and effective working in confined spaces. The forks have a standard Euro pallet dimension (fork length of 1150 mm). The two built-in 12V gel batteries with a capacity of 100Ah ensure a long operating time of up to approx. 4 hours. Charging the pallet truck is easy: simply plug it into a conventional 230V socket and the pallet truck is ready for use again in no time. The pallet truck has a high-quality CURTIS control unit, which is waterproof and can therefore also be used in damp or cool rooms for short periods. The high lift pallet truck can be operated intuitively using the built-in tiller. The control instruments such as the battery charge indicator, the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. In addition to the normal transport speed of approx. 4.2 km/h, it also has a "creep mode". Creep mode enables slow and precise movement, allowing the operator to maneuver even in the narrowest aisles and shelves. Technical data: -- Load capacity: 1200kg -- With free lift -- Lifting height: 2.5m -- Motor power: 750W -- Weight: 465kg Lifting speed: -- with load: 83mm/s -- without load: 136mm/s Lowering speed: -- with load: 112mm/s -- without load: 98mm/s. Climbing ability: -- with load 6% -- without load 8% Turning radius: 1366 mm Whether you want to have the pallet truck delivered or pick it up from us on site in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and viewings as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: new, Year of construction: 2024, fuel type: electric, New goods - 3.239€ excl. tax - Incl. shovel set - Shipping possible - Available immediately SCHORR electric high lift pallet truck with free lift 1200kg load capacity 3.5m lifting height -- Ideal for low ceiling heights -- Mast only extends from the height of the mast (FREIHUB) -- Fully electric & self-propelled with various driving modes -- Incl. 24V 100Ah gel batteries (maintenance-free) and integrated charger Ksdpemxki Ajfx Acpedu -- High-quality CURTIS control unit (waterproof) -- Polyurethane tires: durable and abrasion-resistant -- Various riding programs (incl. "Turtle" / "Slow mode") -- Safe stand thanks to electromagnetic brakes -- High-performance hydraulic pump With its free lift, the high-lift truck is particularly suitable for warehouses and rooms with low ceilings. The mast only extends from the height of the mast and thus enables safe and effective working in confined spaces. The forks have a standard Euro pallet dimension (fork length of 1150 mm). The two built-in 12V gel batteries with a capacity of 100Ah ensure a long operating time of up to approx. 4 hours. Charging the pallet truck is easy: simply plug it into a conventional 230V socket and the pallet truck is ready for use again in no time. The pallet truck has a high-quality CURTIS control unit, which is waterproof and can therefore also be used in damp or cool rooms for short periods. The high lift pallet truck can be operated intuitively using the built-in tiller. The control instruments such as the battery charge indicator, the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. In addition to the normal transport speed of approx. 4.2 km/h, it also has a "creep mode". Creep mode enables slow and precise movement, allowing the operator to maneuver even in the narrowest aisles and shelves. Technical data: -- Load capacity: 1200kg -- With free lift -- Lifting height: 3.5m -- Motor power: 750W -- Weight: 465kg Lifting speed: -- with load: 83mm/s -- without load: 136mm/s Lowering speed: -- with load: 112mm/s -- without load: 98mm/s. Climbing ability: -- with load 6% -- without load 8% Turning radius: 1366 mm Whether you want to have the pallet truck delivered or pick it up from us on site in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and viewings as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.