Used Spray Ball for sale (4,980)

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Welded construction made of high-quality steel profiles with continuous profile crossmembers * Designed for high point loads * Outer frame made of UNP steel Fifth Wheel Coupling * 2-inch kingpin Under-ride Protection * Compliant with EC standards, bolted design Side Under-run Protection * Compliant with EC standards Landing Gear * With single-side operation on the right * Support load approx. 66 t / lifting capacity approx. 24 t. Axles * 5 x 10 t air suspension axle assembly * Manufacturer: SAF * With drum brake approx. 400x200 mm * ABS, AGS * Wheel connection centrally mounted, 10-hole with ET 0 * Total air suspension travel approx. 200 mm * Of which lifting approx. 140 mm and lowering approx. 60 mm * Control via rotary slide valve with detent function Steering * 1 axle with trailing steering * 2nd axle fixed * 3rd, 4th and 5th axles with forced steering via tie rod * Lubrication points of swivel bearing centrally located outwards * Axle lift: first and second axles automatically liftable * With additional shutdown on the chassis Braking System * Two-circuit compressed air braking system compliant with EC with EBS and RSS * Automatic load-dependent regulation * Manufacturer: Wabco. * Spring-loaded cylinders as parking brake * Interchangeable secured coupling heads firmly mounted on the front cross member * Without connecting line to the tractor unit * Aluminum air tank Tires * 10x 445/65 R22.5 164J on rim 14.00 x 22.5 ET 0 * Manufacturer of our choice * TPMS: Tire pressure monitoring system TPMS according to ECE R141 * With data transmission to the tractor unit Fenders * Compliant with EC standards, 1st axle at the front, 2nd axle at the rear * 3rd, 4th and 5th axles each one 1/4 PVC fender at the front and rear * Rear fender with mud flaps. Load securing * 5 pairs of folding lashing rings * Evenly distributed (tensile force approx. 24.5 t) * 11 pairs of hook plates welded into the outer frame (tensile force approx. 3 t) * 10 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t) * Recess pockets: - 10 pairs of recess pockets recessed in the outer frame * 6 pairs of recess pockets recessed in the floor (on the outside of the longitudinal beam) * Stake pockets: - 16 pieces of galvanized stake pockets, approx. 80x80x8 mm, approx. 850 mm usable length (with locking mechanism) * Stake magazine: one magazine for 8 pieces each on each side in front of the front wall * Stake pockets approx. 80/80 mm Front Wall * Bolted corner stakes with a steel approach plate over the entire width and height. Floor * Approx. 28 mm Z-hardwood floor recessed in the outer frame flush Lighting System * Compliant with EC standards, 24 volt with multi-chamber lights Blsdpfxjz Dmnde Al Aon * LED side marker lights * LED position lights white at the front * LED outline lights at the rear * License plate lights. 1x15 and 2x7-pole. Plug connection on the front cross member Equipment * Outrigger with holder, double * Warning sign according to ECE 70 * Work lights on the lamp carrier (switched via reverse gear) * Holder for rotating beacon at the rear (incl. rotating beacon) * One climbing ladder each side fixed including pluggable climbing aid - * Smart Board * Sticker "Vehicle swings out" * Sticker "Center of gra

Condition: used, mileage: 12,141 km, power: 132 kW (179.47 HP), first registration: 10/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, LED lighting, rear step over half the width, rear wing doors without window cut-outs, sliding door on the right, multifunction steering wheel, double passenger seat bench, hill start emergency braking lane change side wind assistant, reversing camera, DAB+, USB data socket only, MAN Media Van, cell phone interface, winter package, wooden floor in the load compartment with rear loading edge protection, C-rails on the side walls, partition wall with sliding window, lashing eyes Bljdpfx Aloy Hfaie Asn

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Blsdpfjz Hbm Tjx Al Ajn Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: new, Bosch EXT.BALL.SWITCH, part no. 1070077421-103, serial no. 001706154, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Blodpji D T U Aefx Al Aon

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, The BTS-MF100 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 100 kg. It is equipped with automatic bale cycle, hour counter and also strap eject system. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Bljdpfxjvaimhj Al Asn Pressing force: 6 Ton Bale weight: up to 100 kg (material depending) Bale size: 850 H (var.) x 980 W x 800 D mm Machine size: 2399 H x 1440 W x 1014 D mm Machine weight: 632 kg Transport height: 2399 / 1876 mm (on request) Loading aperture: 980 W x 480 H mm Cycle times: 28 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Hour counter Strap eject for easy removal of bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Clothes Light valuable materials Optional extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, The BTS-MF150 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 150 kg. The baling press impresses with its ease of use, safe operation and its large filling volume, it is ideal for medium material volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 8 Ton Bale weight: up to 150 kg (material depending) Bale size: 1000 H (var.) x 975 W x 800 D mm Machine size: 2630 H x 1560 W x 1030 D mm Machine weight: 780 kg Transport height: 1955 mm Loading aperture: 975 W x 470 H mm Cycle times: 40 seconds Bljdpfxevalkqe Al Aon Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF300LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 300 kg. Due to the compact design and low height of under 2 meters this baler is perfect for rooms with limited ceiling heights. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 20 Ton Bale weight: up to 300 kg (material depending) Bale size: 1100 H (var.) x 1200 W x 800 D mm Machine size: 1986 H x 1800 W x 1100 D mm Machine weight: 1140 kg Transport height: 1986 mm Loading aperture: 1200 W x 600 H mm Cycle times: 45 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Hour counter Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Bljdovalxqjpfx Al Ajn Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF550 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 550 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3217 H x 2115 W x 1200 D mm Machine weight: 1650 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Blsdpfjvamlnsx Al Aen Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF650 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 650 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 650 kg (material depending) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine size: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Bledpfsvamn Ajx Al Aen Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: excellent (used), mileage: 398,000 km, power: 441 kW (599.59 HP), first registration: 08/2010, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x6, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: beige, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2010, Equipment: retarder, = Additional Options and Accessories = - Leaf spring suspension - Air suspension - Radio/CD player Bledpfxsuu Hb Is Al Aen - Sleeper cab - Sun visor - Tool box - Power take-off (PTO) = Notes = Transmission: Manual Number of gears: 16 Transmission model: ZT 440 Torque converter Color: Red Load capacity: 375,000 kg Manufacturer: Mercedes Benz Type: Actros MP 3 / 4160 8x4 SLT VIN: WDB9301821L470692 First registration: 19-08-2010 Odometer: Approx. 398,000 km Engine: V8 / 600 HP / Euro 5 Transmission: Manual ZF Transmission / Low – High Range + Split 16-speed with clutch pedal 8x6x4 Axle 1: Steel suspension / 9000 kg / Tires 385/65R22.5 Axle 2: Air suspension / 8000 kg / Tires 385/65R22.5 Axle 3: Steel suspension / 13,000 kg / Hub reduction / Tires 315/80R22.5 Axle 4: Steel suspension / 13,000 kg / Hub reduction / Tires 315/80R22.5 GVW: 41,000 kg GCW: 5th wheel use: 250,000 kg Drawbar use: 375,000 kg Additional information: Push front coupling Rear Rockinger RO56E coupling Jost JSK 38 5th wheel mounted on a sliding frame Toolboxes fitted behind the cabin ZF Retarder ZF 440 Torque Converter PTO + Hydraulic Pump Counterweight box loaded with 15 tons of steel for extra rear axle pressure Tractor fuel tank volume: 1000 liters = Further Information = Transmission Transmission: Manual ZF Transmission / Low – High Range + Split 16-speed with clutch pedal, 16 gears, Manual Axle configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Suspension: Leaf spring Rear axle 1: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Leaf spring Rear axle 3: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Leaf spring Weights Unladen weight: 15,920 kg Payload: 250,000 kg GVW: 41,000 kg Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: used, maximum load weight: 24,500 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/1995, Year of construction: 1995, Equipment: ABS, BABELSBERGER SSA 51 SAF AXLE BALLAST 14 TIRE SETS 1ST HAND? ----VEHICLE HISTORY * GERMAN VEHICLE Bjdpfotvt A Tsx Al Ajln * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * TYPE: SSA 51 / 124/1 * BALLAST TRAILER * 3 AXLES * DRUM BRAKES * AIR SUSPENSION * 14 TIRE SETS * LOAD SECURING LASHING POINTS * TIRE SIZE: 445 / 65 R 22.5 * PERMISSIBLE TOTAL WEIGHT: 34,000 KG * UNLADEN WEIGHT: 9,500 KG * PAYLOAD: 24,500 KG * IMMEDIATELY READY FOR USE * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions – see website. Important note – important information: Despite careful checking of all details in our offer, it may happen that errors occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Bjdpfxoxttc Ao Al Asln Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF75MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 700 H (var.) x 700 W x 500 D mm Machine size: 2005 H x 2050 W x 872 D mm Machine weight: 562 kg Transport height: 2005 mm Loading aperture: 700 W x 500 H mm Cycle times: 35 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Bjdpfsvugzrjx Al Ajln Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Power supply 380 - 400 V (3 phase) Twin Chamber Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Bljdpfx Aljvug Dyo Aon Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Reglaj Attachment( Ballast Leveling Bucket) Designed to improve sub-rail stability, our Reglaj Attachment is used for ballast leveling operations. Bledpfx Alev Spfze Asn For more detailed information, please feel free to contact us.

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Manufactured new to order Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Electric tipping discharge Bsdpfx Aeif Upfol Asln Capacity 50 Kg to 90 Kg according to product type 2 x Models

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF550HD special waste baler is the ideal baler for compacting difficult materials such as scrap tyres, computer monitors CRT, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3570 H x 2115 W x 1200 D mm Machine weight: 1935 kg Transport height: 2500 mm Loading aperture: 1500 W x 780 H mm Cycle times: 50 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Scrap tyres Food cans and sheet metal containers Canisters and plastic containers / packaging Car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Bledpfx Aljzd Rvo Ajn Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF650 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 650 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 650 kg (material depending) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine size: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material Blsdjbhxbtjpfx Al Asn User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Year of construction: 1980, condition: used, Compressed air sprayer, Sprayomat, pressure sprayer, small quantity lubrication, minimum quantity lubrication, plant protection sprayer -Manufacturer: Lüfa-Werke, compressed air sprayer Sprayomat -Type: SM 21 -Engine: AEG 0.25 kW Bsdpfx Aotpyrkol Asln -Container: with level indicator -Dimensions: 590/320/H910 mm -Weight: 56 kg

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 06/2022, loading space length: 11,060 mm, loading space width: 2,480 mm, loading space height: 1,500 mm, total length: 113,500 mm, total width: 2,480 mm, total height: 1,500 mm, suspension: air, tire size: 385/65/22.5, color: red, Year of construction: 2022, Equipment: ABS, = Additional options and accessories = - Air suspension - Central lubrication = Additional information = Axle configuration Tyre size: 385/65/22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 10,000 kg; steered Rear axle 3: Max. axle load: 10,000 kg; steered Weights Unladen weight: 8,370 kg Payload: 39,630 kg gross vehicle weight (GVW): 48,000 kg Functional Loading platform height: 150 cm Condition Technical condition: very good Visual condition: very good NOOTEBOOM OVB-48-03 3-AXLE LOWBED SEMI-TRAILER AIR SUSPENSION SAF AXLES Bledpfjv I R N Tjx Al Aon 2ND AND 3RD AXLE STEERED BY ELECTROHYDRAULIC AUXILIARY STEERING REMOTE CONTROL CENTRAL LUBRICATION L=1106CM W=250CM 34 X FLOOR ANCHORS 20 X STAKE POCKETS

Condition: used, Year of construction: 2004, Painting robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Passage width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles Bjdpfx Aoz A S I Hel Asln - Pump station with 5 Graco paint pumps Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 07/2001, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, total length: 12,800 mm, total width: 2,550 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,830 mm, color: other, Year of construction: 2001, Equipment: ABS, = Additional Options and Accessories = - BPW axles - Drum brakes - Central lubrication system = Notes = Beautiful 2021 Nooteboom 4-axle dump trailer, model OVB-73-04, axles 2, 3, and 4 hydraulically steered, BPW axles with drum brakes, hardwood floor, 2 x 10 stakes, 2 x 5 lashing points, central lubrication system, 3.5" kingpin, hydraulically suspended, unladen weight: 12,220 kg, permissible total weight: 71,400 kg (technically 89,250 kg), twin tires on the rear axle with tires of size 295/80 -R22.5 (tread depth left: 13/10, 10/10, 17/12, 15/12 mm; tread depth right: 13/12, 10/130, 10/17, 4/5 mm), Belgian registration with a valid main inspection until 08.09.2027. Bsdpfx Aljzxd Rhs Aoln = Further Information = Axle configuration Tire size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 11,600 kg; Tread depth left inner: 95%; Tread depth left outer: 70%; Tread depth right inner: 75%; Tread depth right outer: 60% Rear axle 2: Twin tires; Max. axle load: 11,600 kg; Steered; Tread depth left inner: 55%; Tread depth left outer: 80%; Tread depth right inner: 80%; Tread depth right outer: 75% Rear axle 3: Twin tires; Max. axle load: 11,600 kg; Steered; Tread depth left inner: 80%; Tread depth left outer: 70%; Tread depth right inner: 80%; Tread depth right outer: 80% Rear axle 4: Twin tires; Max. axle load: 11,600 kg; Steered; Tread depth left inner: 60%; Tread depth left outer: 70%; Tread depth right inner: 70%; Tread depth right outer: 60% Weights Unladen weight: 12,220 kg Payload: 59,180 kg GVW: 71,400 kg Functional Body brand: Nooteboom OVB-73-04 Maintenance, History and Condition APK (Technical Inspection): Valid until 08.2027 Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.

Condition: new, Year of construction: 2026, BITUMEN EMULSION SPRAYER BS-2000 - Spray bar for 11 nozzles with a width of 2.4 m Blodpfxovpg Eas Al Aen - Spray width with tyre - 2.4-2.8 m - System cleaning - 3-level, diesel fuel - Tanker self-pumping function - Mounting on a frame or on a trailer on request - Emulsion tank heating system - Own 2000 l tank - Possibility of connecting a third-party compressor for cleaning the sprinkler bar - Mechanical thermal sensor - Lance for manual sprinkling Completing: - Tank truck 2000 l - Power block - Hose - 4m with rod and nozzle for manual spraying - Hoses for supplying bitumen emulsion - Spray bar for emulsion with 11 nozzles - Gas burner with regulator Specifications: Power block (Petrol Engine HONDA GX-200) Engine power – 4.1 kw - Spray rate of bitumen emulsion with hand lance4 l/min - Spraying rate of bitumen emulsion through tyre 55 l/min - Engine 4-stroke petrol engine with air cooling - Bitumen emulsion consumption 0.8 l/m2 - Tank capacity 2000 l - Recommended gas cylinder 27 l (not included) - Overall dimensions (portable) without trailer 257*190*160 cm - Shoulder weight (without emulsion) 715 kg Price: 9600 Euro (Netto) Price on the trailer: 15000 Euro

Condition: new, Year of construction: 2026, Bitumen Emulsion Sprayer BS-1000(without trailer) Bitumen Emulsion Sprayer BS-1000 is designed for priming the surfaces prior to asphalt laying, asphalting adjacent areas, as well as for pouring seams and cracks with bitumen emulsion. Bitumen emulsion is supplied from a 1000 l tank, which is installed directly on the fixing platform. Heating system allows the bitumen emulsion to be sprayed in a cold time. It is easy to use. It has its own cleaning system. Made on a steel frame, or mounted on a trailer. SPECIFICATIONS: - Productivity – 36 l/min. - Spraying width - 2,2 m. - Cleaning System - 3-level, diesel fuel. - Self-pumping function of the tank. - Installation on a frame or on a trailer at the customer's request. - Heating system of the emulsion tank. Bledpfevptnuox Al Aon - Tank 1000 l. - Possibility of connecting an extra compressor for spraying bar cleaning. - Thermal sensor - mechanical. - Hand spraying rod The price for BS-1000 on the trailer: 11 400 Euro

Condition: new, Year of construction: 2026, SELF-PROPELLED BITUMEN EMULSION SPRAYER BS-1000SP TM TICAB self-propelled Bitumen Emulsion Sprayer BS-1000-SP is the most powerfull mini bitumen emulsion sprayer among all TICAB mini sprayers. Spray bar 1,5m (7 nozzles) covers up to 2000 sq.m per hour. Tank 1000 L. Repair work in the shortest possible time both on small areas (household areas, alleys) and on the bigger areas. Self-propelled system fits any trailer. Car is needed just to move the BS-1000-SP sprayer to the construction side. It makes using the sprayer much easier and increases its maneuverability. Operate remotely using a joystick. Specifications: Gasoline engine – 16 hp; Productivity – 30 l/min; Spraying width – 1.7 m; System cleaning – 3-level, diesel fuel; Self-pumping function of the tank; Installation on a frame or on a trailer at the customer's request; Heating system of the emulsion tank; Tank – 1000 l; Possibility of connecting an extra compressor for spraying bar cleaning; Thermal sensor – mechanical; Bjdpfxsvpg Izs Al Ajln Burner – propane; Hand spraying rod; Self-propelled traction hydraulic wheel.