Used Stimin Fus-22.2M for sale (425)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Lredpfx Aoi Rixksh Seu Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, axle configuration: 2 axles, first registration: 06/2019, next inspection (TÜV): 06/2024, Equipment: ABS, Leaf-sprung suspension, drum brakes, galvanized, good condition, 15 units available. Price: 9,900 Please let us know your requirements so that we can prepare a customized offer for you. If not in stock, delivery time is 7 to 9 weeks. We sell tires and rims for trucks and trailers from the following brands: Fulda, Bridgestone, and Petlas. Sizes: 315 / 55 - 22.5 385 / 55 - 22.5 385 / 65 - 22.5 We manufacture the following types of trailers: Container chassis (all types) Low-bed trailers Dump trailers Tank trailers Curtain-sided trailers Lrodpezfylnsfx Ah Sou Silo trailers

Condition: new, Manufacturer: Balluff Condition: New, packaging only opened for the purpose of taking photos Type: Inductive coupler Model: BIC1B0-IT1A7-Q40KFU-SM4A4A Order number: BIC007F Product series: BIC Lredjzcw T Ejpfx Ah Sou Design: IO-Link Base Transmission principle: Non-contact inductive energy and signal transmission Communication interface: IO-Link Design: Q40 Connection type: M12 connector Protection class: IP67 Application area: Tool changing systems, robotics, handling technology, and automated production systems Use: Contactless transmission of energy and IO-Link data between stationary and moving machine components Mounting type: Machine and plant engineering

Condition: used, power: 110 kW (149.56 HP), first registration: 02/2015, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, LICENSE PLATE: EY907JS TITLE: NEW MITSUBISHI FUSO 7C15 ROLL-OFF TRUCK, FRONT AND REAR LEAF SPRING SUSPENSION, RIGHT-HAND DRIVE, REQUIRES A CLASS C LICENSE REF: 24C40 YEAR: 02/2015 HORSEPOWER: 150 ENGINE DISPLACEMENT: 2998 EURO STANDARD: 6 KILOMETERS: 0 with new original engine TRANSMISSION: automatic DIFFERENTIAL LOCK: no Ledpfxezqppye Ah Sjru RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2800 TOWING CAPABILITY: yes ORIGIN: Italy CABIN: short and low NUMBER OF SEATS: 3 PAYLOAD: 4250 kg - TRACTOR UNIT: 7500 kg at full load - TRACTOR UNIT + TRAILER: 11000 kg at full load BODY TYPE: new roll-off ROLL-OFF MODEL: TAM TE6-32 SLIDING: yes CRANE: no ROLLER: vertical ADR: no DIMENSIONS FOR BODY INSTALLATION: FROM: 2.70 m + 0.16 m TO: 3.50 m + 0.16 m OVERALL LENGTH: 5.30 m OVERALL LENGTH WITH CONTAINER: 5.60 m FRONT CABIN WIDTH: 1.95 m REAR WIDTH BEHIND AXLE: 2.00 m REFURBISHED: yes SERVICED: yes TIRES: 80% front - 50% rear PRICE: 46,500.00 + VAT. Errors and omissions excepted. The prices listed do not include VAT. Please contact the sales representative for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA ROLL-OFF TRUCKS operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specializing in trucks, trailers, and roll-off equipment. With a readily available fleet of over 50 trucks and over 150 roll-off containers, with and without cranes. S.E.&O. Due to the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 435 h, total height: 1,065 mm, total width: 645 mm, overall weight: 114 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Formlabs Fuse 1 • Build Volume 165 x 165 x 300 mm 6.5 x 6.5 x 11.8 in • Layer Thickness 110 microns 0.004 in • Build Speed 10 mm per hour 0.39 in per hour • Laser Type Ytterbium Fiber • Laser Spot Size 200 microns 0.0079 in • Material Refresh Rate 30 to 50 percent • Hopper Capacity 8.5 kg PA12 nylon 18.7 lb • Dimensions 685 x 645 x 1065 mm • Maximum Part Size 15.9 x 15.9 x 29.5 cm 6.3 x 6.3 x 11.6 in • Minimum Access Dimensions 125.5 x 149.5 x 187.0 cm 49.4 x 59.0 x 73.6 in • Printer Dimensions 64.5 x 68.5 x 107 cm 165.5 cm with stand • Weight 114 kg • Startup Time 60 minutes • Operating Environment 18 to 28 degrees Celsius 68 to 82 Fahrenheit less than or equal to 30 percent humidity • Internal Temperature 200 degrees Celsius 392 Fahrenheit • Temperature Control Quartz tube heating elements PTC cartridges • Air Handling pressure controlled two stage filtration HEPA and carbon • Power Requirements EU 230 VAC 7.5 A US 120 VAC 15 A Lodpfx Aoy Sy Nvjh Ssru • Galvanometers Formlabs custom • Laser Wavelength 1065 nm • Laser Power maximum 10 watts • Beam Divergence 4.01 mrad • Laser Class Class 1 • Connectivity WiFi 2.4 GHz Ethernet 1000 Mbit USB 2.0 • Touchscreen 10.1 inch 1280 x 800 • Control Brand Formlabs • The display is damaged however this does not affect the function Fuse Sift OPTIONAL: Fuse Sift price on request • Fuse Sift Dimensions 99.1 × 61.0 × 188.8 cm 39.0 × 24.0 × 61.8 • Fuse Sift Weight 93 kg without build chamber or powder 205 lb • Build Chamber Dimensions 27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in • Build Chamber Weight 11 kg 17.6 kg full with 20 percent packed powder 24.3 lb 38.8 lb • Build Volume 16.5 × 16.5 × 30.0 cm 6.5 × 6.5 × 11.8 in • Fresh Powder Hopper Capacity 8.5 kg Nylon 12 18.7 lb • Used Powder Hopper Capacity 9.1 kg Nylon 12 20 lb • Air Filtration Technology replaceable HEPA filter • Operating Environment 18 to 26 degrees Celsius 68 to 80 Fahrenheit less than or equal to 30 percent humidity • Air Handling negatively pressurized hood with replaceable HEPA filter independent venting system • Power Requirements EU 230 VAC 7.5 A dedicated circuit US 120 VAC 15 A dedicated circuit • Power Requirements high power vacuum EU 230 VAC 10 A US 120 VAC 20 A • Vacuum Requirements auxiliary vacuum with static dissipative grounded components • Sound Emission maximum 76.5 dB

Condition: used, mileage: 201,920 km, power: 92 kW (125.09 HP), first registration: 06/2009, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 2,200 mm, total height: 3,200 mm, loading space length: 4,400 mm, loading space width: 2,150 mm, loading space height: 2,150 mm, * Mitsubishi Canter Fuso 3C13 * Twin tires * VIN: TYBFB833BE4DU06124 * Engine type: 4M4.2A3-73-40 * kW: 92 * Displacement: 2977 cc * Euro 5 * Unladen weight: 2790 kg * Payload: 635 kg * Gross weight: 3500 kg * Wheelbase: 3350 mm * Body internal length: 4.40 m * Body internal width: 2.15 m * Body internal height: 2.15 m * Vehicle length: 6300 mm Lsdpfx Aey Ng Umoh Sjru * Vehicle width: 2200 mm * Vehicle height: 3200 mm * Tires: 195 / 75 R 16 C * Vehicle without VAT * All information provided without guarantee Tel./WhatsApp:

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, total width: 1,995 mm, total height: 2,195 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Description: Fuso Canter 7C18 Roll-off Tipper, latest generation Wheelbase: 3400mm. For container lengths up to 4000mm. 3L Turbo diesel engine, 129 kW / 175 hp, EURO 6 Start/Stop automatic 5-speed manual transmission Wheelbase: 3400mm Rear axle with twin tires and automatic differential lock Lredpfx Ahjy T Tx Hs Ssu Traction tires: 205/75 R16C 4-wheel disc brakes Electronic Stability Program (ESP) ABS with electronic brake force distribution Ball-type trailer coupling 3-year warranty on the base vehicle from the date of first registration or up to 100,000 km. Comfort cab with the following features: Electric windows Electrically adjustable and heated mirrors Central locking with remote control Immobilizer Adjustable steering wheel and steering column Driver airbag 2 DIN radio with Apple Carplay and reversing camera Tachograph with digital technology EC-approved tachograph Storage compartment above the windshield & behind the seat Double passenger seat Driver's seat with armrest Lockable glove compartment Fog lights with automatic daytime running lights Tilting cab Lane keeping assist Emergency braking assist Turning assistant Automatic climate control Digital tachograph Steering wheel with control unit LED work lights at the rear LED reversing lights * Other cab variants, wheelbases, bodies, and hydraulic systems for snowplows and spreaders are in stock or available for short-term delivery. Please inquire! Roll-off system: KING HZ6 90-degree hook height Push arm system Shallow lifting angle Hydraulic container locking Including remote control Pulling and tipping force: 6000 kg Mechanical hook lock Load holding valves on all hydraulic cylinders Emergency stop function Body: CE-approved Drive via vehicle hydraulics For roll-off containers from: 2800 to 4000mm in length. Various containers in stock!!! Various cab variants and wheelbases with higher payloads are available for short-term delivery. This allows for the realization of larger container sizes. Large-volume containers with rear tailgate on the right/left, as well as drive-through versions with a traversable rear flap, platform body designs with folding side panels, and lattice bodies are available at an extra cost. You can find more vehicles of the Fuso Canter and Multicar brands, as well as various container sizes, at: Leasing / Financing / Trade-in ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors. Our general terms and conditions apply.

Condition: used, mileage: 68,500 km, power: 110 kW (149.56 HP), first registration: 01/2013, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, crane, differential lock, electronic stability program (ESP), fog lights, power assisted steering, traction control, Vehicle location: en route / in transit, short cab, rear window, heated mirrors, electric window (left), electric window (right), radio, 5-speed gearbox, ABS (anti-lock braking system), traction control (ASR), auxiliary drive, differential lock, work lights, rotating beacon, storage compartment, leaf spring suspension, U-shaped protection, side aluminum fender, crane behind the cab, emergency stop, foldable, 4-point hydraulic outriggers, 1x hydraulic extension, green environmental badge. Ledpozgu Sljfx Ah Seru Superstructure: Blumenbecker HM16TKI aerial work platform with work basket, working height approx. 16m, lateral reach approx. 8.45m. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Lrjdpfx Aoygud Ash Seu Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: used, mileage: 28,910 km, power: 129 kW (175.39 HP), first registration: 07/2023, fuel type: diesel, overall weight: 7,490 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 6, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, MB FUSO 8 180 TT-S Horsetruck For 1-3 horses, rear and side ramp, pop-out, underfloor storage beneath the living area, external storage compartments all around. 4 berths, living room, video surveillance. Stationary air conditioning, auxiliary heater, 1 TV/SAT, real wood finishes, bathroom, shower, WC, air conditioning, kitchen, leather seating area, microwave, refrigerator and freezer, external tack locker, winch, cruise control, alloy wheels, navigation system, towbar, and much more. Errors/data entry mistakes & interim sale reserved. * NET SALE POSSIBLE. * Top leasing offers * Net price in Germany plus 19% VAT. Available immediately // Location and vehicle viewing: Lrsdpfx Aeywqxlsh Ssu STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all makes in the area of horse transporters and trailers. Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Condition: used, mileage: 124,990 km, power: 107 kW (145.48 HP), first registration: 04/2010, fuel type: diesel, empty load weight: 3,605 kg, maximum load weight: 2,895 kg, overall weight: 6,500 kg, tire size: 215/75R16C, axle configuration: 4x2, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 7, Equipment: ABS, additional headlights, cabin, low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, rear window, heated mirrors, electric window left, electric window right, auxiliary heating, switch 6, ABS (anti-lock braking system), work lights, rotating beacon, stowage box, leaf spring suspension, trailer coupling ball head, G1 noise protection, U-protection, aluminum side bumpers, green environmental badge Body: Roll-off system AJK type NHS3-3150 for city containers up to 3.4m In February 2019 the coupling was renewed at 103600km! Spare wheel available for an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! Lrjdpfx Aovhicfjh Ssu - .

Condition: new, -New/One Way -available immediately -The price is from the Duisburg depot (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our new 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Lrodpfx Aevx U U Ijh Ssu Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: used, container length: 20 ft, empty load weight: 2,100 kg, -Used -Wind and waterproof -available immediately -The price is ex depot in Munich (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Ljdpfx Ahevyacge Seru Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Year of construction: 2010, condition: ready for operation (used), Diosna WV600 ATP/T/FU Premium wendel mixer with 4 bowls 600kg dough Lodpewa Sz Tjfx Ah Ssru year of build 2010 2 speed frequency controlled geardrive scraper with temperature measurement stainless steel digital Siemens Simatic Multi touch panel shorter kneading time fast dough sequence lower dough heating suitable for all types of dough, thanks to the gentle kneading capacity in flour 375kg bowl contents 1020 liter

Condition: used, mileage: 587,500 km, power: 129 kW (175.39 HP), first registration: 08/2017, fuel type: diesel, overall weight: 7,500 kg, gearing type: automatic, emission class: euro6, Equipment: tail-lift, Tail lift: ----Refrigeration unit: Ljdpfx Asx Dzqvjh Soru ----- Automatic tail lift – air conditioning – Carrier Supra 550 Suspension: Leaf suspension

Condition: like new (used), Year of construction: 2021, Braun Melsungen syringe pump Perfusor Space US. Power Supply SP US III (REF 8713112D). Space Pole Clamp (Speed Clamp) (REF 8713131). Unused in original packaging. Includes functional guarantee. Lredpfewutvzex Ah Sju

Condition: new, Year of construction: 2025, container length: 20 ft, NEW CONTAINER / ONE WAY / Year of manufacture 2025/ 2026 +Lock box +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015 Lsdpfx Ahewut Nbe Soru

Condition: used, Year of construction: 1986, Universal Milling Machine Manufacturer: IMATEC, Type: FU-145 Year of manufacture: approx. 1986 Technical Specifications Manufacturer: IMATEC Type: FU-145 Year of manufacture: approx. 1986 Conventional Control System Travels X/Y/Z: 1000 / 300 / 500 mm Vertical Spindle Speeds: 38 - 1440 rpm Horizontal Spindle Speeds: 35 - 1500 rpm Spindle Mount: ISO 50 Milling Motor: 5.5 kW Connected Power: 7.0 kW Installation Dimensions: approx. L 2.0 x W 2.10 x H 2.2 m Weight: approx. 3.1 t Lodpfx Ahswhm R Se Seru Features • 3-axis digital display ELESTA • Table size: 1620 x 320 mm All information is subject to change without notice. A live demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2008, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm Ljdpfx Ahowhp Dze Soru - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Year of construction: 1988, condition: used, diameter different mm weight 200 kg Ljdeipyybjpfx Ah Seru Type different 0 14 pieces arbors for milling tools and 4 steadies, 2 for FU 400 (84 mm hole dia.), 1 for FU 315 (70 mm hole dia.) and one small one (35 mm hole dia.).

Condition: ready for operation (used), Hörmann B 460 FU control unit, 636721, 230V, 50 Hz, serial number: 65924483590, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Lrodpfolcf Skjx Ah Seu

Condition: used, mileage: 101,561 km, power: 107 kW (145.48 HP), first registration: 05/2007, fuel type: diesel, overall weight: 7,500 kg, color: white, gearing type: mechanical, emission class: euro4, Equipment: air conditioning, tail-lift, * Mitsubishi Canter Fuso 7C15 4x2 * Box body with tail lift * Air conditioning * Manual transmission * VIN: TYBFE85BH6DU00370 * Engine type: 4M5.2AR-33-69 * kW: 107 * Euro 4 * Displacement: 2977 cc * Unladen weight: 4460 kg * Payload: 2965 kg Lrjdpjr Ex Daofx Ah Seu * Gross vehicle weight: 7500 kg * Wheelbase: 4200 mm * Box interior length: 6.15 m * Box interior width: 2.50 m * Box interior height: 2.50 m * Margin scheme taxation * All information provided without guarantee Tel./WhatsApp:

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 - Transport bed: 3.0 kW FU 4.0 kW - Feed speed (m/min.): 5 - 25 - Workpiece conveyor belt suction clamping system (kW): 7.5 - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73 Lrsdpjtt Slcjfx Ah Sju

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm voltage 26,8 V Lrodpfx Ahox Dda Tj Sju total power requirement 26,8 kW weight of the machine ca. 0,040 t

Year of construction: 2018, condition: ready for operation (used), An HP additive manufacturing system for PA12 nylon including accessories is available. Printing technology: Multi Jet Fusion, build volume X/Y/Z: 380mm/284mm/380mm, material: PA12 (Nylon 12), machine dimensions X/Y/Z: approx. 2250mm/1250mm/1450mm, weight: approx. 750kg, operating hours: approx. 16300h. Including HP powder processing station, 3x HP build units, 3x printheads, 2x heat lamps and 5x fusion lamps. Documentation available. An on-site inspection is possible. Lsdpfx Aozqfwtsh Seru