Used System Chemie T 50 for sale (97,626)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) Dodpfxeyzl T Ee Aixeuu - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Year of construction: 1998, condition: used, machine/vehicle number: 23 800 029, table mounting size: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle taper: SK 50 spindle turning speed range: 56 - 2800 rpm carriages longitudinal and cross: ca. 10 - 1800 mm/min carriages vertical: 2,5 - 450 mm/min Dueds Ici Uopfx Aixeu electrical connection: 400 V, 16 kVA kW space needed: 2000 x 2250 x 2150 mm weight: 4500 kg

Condition: new, functionality: fully functional, machine/vehicle number: BSD, Year of construction: 2023, operating hours: 595 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,760 mm, fuel type: diesel, mast type: triplex, construction height: 2,730 mm, power: 55 kW (74.78 HP), fork length: 1,400 mm, empty load weight: 9,400 kg, total length: 4,500 mm, drive type: Diesel, construction width: 2,230 mm, Side loader Chassis number: BSD Load centre: 700 Fork width: 180 mm Fork thickness: 50 mm Mast type: Triplex Transmission: hydrostatic Condition: new machine Technical condition: very good Front tyre type: pneumatic Front tyre size: 27x10-12 Front tyre condition: 80 - 100% Rear tyre type: pneumatic Rear tyre size: 27x10-12 Rear tyre condition: 80 - 100% Duodpfxjyw Ayno Aixsu Hydraulic fork height adjustment – rear, adjustment range: +/- 100 mm, 2x additional work lights, seat – Grammer Maximo L – air-suspended, platform height 850 mm

Condition: new, Year of construction: 2026, functionality: fully functional, D-T50 – CNC Turret Punch Press | Heavy Duty CNC Turret Punch Press – D-T50 | 500 kN | Sheet size 2500×1250 mm Heavy-duty CNC turret punching machine engineered for high-volume sheet metal fabrication. With a punching force of 500 kN and a stroke rate of 160 hits per minute, the D-T50 guarantees excellent productivity and precision. Key Specifications: • Capacity: 500 kN • Hit Rate: 160 strokes/min • Sheet Size: 2500 × 1250 mm • Max. Sheet Size (with single reposition): 5000 × 1250 mm • Max. Sheet Thickness: ≤ 6.35 mm • Accuracy: ± 0.1 mm • Feeding Speed: 80 m/min • Turret Stations: 16 / 24 / 32 • Air Pressure: 0.65 MPa Duodey Swn Nopfx Aixsu • Machine Dimensions: 5000 × 5200 × 2300 mm ✅ High hit rate – ideal for mass production ✅ Extended sheet capacity with repositioning up to 5000 mm ✅ CE certified | Warranty included | Spare parts & service available D-Y80 – CNC Turret Punch Press | Heavy Duty | Thick Plate CNC Turret Punch Press – D-Y80 | 800 kN | Thick Plate up to 15 mm Heavy-duty CNC turret punching machine designed for processing thick sheet metal. The D-Y80 accommodates material up to 15 mm thick, delivering 800 kN punching force — perfect for structural and heavy-gauge tasks. Key Specifications: • Capacity: 800 kN • Hit Rate: 100 strokes/min • Sheet Size: 2000 × 800 mm • Max. Sheet Thickness: 6–15 mm • Accuracy: ± 0.15 mm • Feeding Speed: 60 m/min • Turret Stations: 6–12 • Air Pressure: 0.65 MPa • Machine Dimensions: 4100 × 4000 × 2400 mm ✅ Exceptional punching force – specialist for heavy-gauge sheet metal ✅ Robust design for demanding industrial applications ✅ CE certified | Warranty included | Spare parts & service available

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Travel measuring system with correction Dsdpfowglfxex Aixouu Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430 MHaidenhain TNC 430 M, spindle speed (max.): 8,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2000, featuring a Heidenhain TNC 430 M control system and a manual swivel rotary table for versatile 5-axis machining. It has a spindle speed up to 8,000 rpm, tool holder SK 40, and rapid traverse rates of 12 m/min in X/Y/Z. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 50 T machine we have for sale. Contact us for more information. • Rapid traverse (X/Y/Z) 12 m/min • Machining capability: 5-axis machining via manual swivel/rotary table axes • Cooling system: External coolant supply; capacity 80 liters; coolant used Alusol SL 51 XBB Dsdpfx Aioydk Npoxeuu • Tool system: Tool magazine with 16 tool positions Technical Specification Taper Size SK 40

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Dedpfx Ajxqf Sdoixsuu Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder Dujdoi Exq Hjpfx Aixju -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 140mm -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available -Price per piece -Dimensions: 810/155/H415 mm -Weight: 66 kg/pc.

Condition: used, Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder Dujdskahknopfx Aixsu -Hydraulic pulling cylinder: with integrated hand pump -Traction force: approx. 50 t -Stroke: 150 mm -Piston rod: Ø 80 mm -Recordings: inside 150 x 50 mm, see photos -Number: 8x cylinder available -Price per piece -Dimensions: 810/155/H480 mm / 820/150/H585 mm -Weight: ca. 65 kg /pc.

Condition: good (used), Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable 50 kW Dsdob A Iwaopfx Aixsuu -Connection pressure: 0.35-1.5 bar -Air flow rate: 1000 m³/h -Weight: 20 kg

Condition: good (used), Chassis, electric motor, DC motor, traction motor, drive motor Dedpfjxl Am Isx Aixsuu -Manufacturer: Baumann, chassis forklift T 25 -Gearbox: Hurth HFP 50 -Wheels: Ø 380 x 180 mm -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 440/400/H500 mm -Total weight: 179 kg

Condition: used, Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder Dujdekuctvopfx Aixsu -Manufacturer: Bahco, hydraulic pulling cylinder type CDXR 50-125 -Traction force: approx. 50 t -Stroke: 125mm -Piston rod: Ø 50 mm -Operating pressure: max. 800 bar -Recordings: inside 150 x 50 mm, see photos -Number: 1x cylinder available -Dimensions: 925/125/H165 mm -Weight: 32 kg

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pull cylinder: with integrated hand pump -Traction force: 50 t -Stroke: 155 mm -Piston rod: Ø 80 mm -Recordings: Inside approx. 145 x 50 mm, see photos -Number: 5x cylinders available -Price: per piece Dodpfxsi Exqij Aixouu -Dimensions: 850/160/H420 mm/ 810/155/H415 mm / 810/155/H420 mm / 815/150/H630 mm -Weight: 68kg / 66kg / 62kg / 65kg

Condition: new, Year of construction: 2025, Item: A-10196-SS-horizontaltank-50m3 Capacity 50.000 L Duodpeq Daf Njfx Aixou Exterior dimensions: L 8817 mm H 3200 mm Ø 2800 mm. Horisontal stainless steel tank AISI 304. Newer used - NEW!

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Dodjvba Rajpfx Aixeuu The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), functionality: fully functional, MITRE SAW , orientable +/-45° model OMGA T50 350 with dust aspirator second hand machine working conditions : Excellent CE regulation : Yes with extractor cabinet ( dust aspirator ) with flat diagram extensions Technical data : volt. 380/50 engine power Hp 3 ( kw 2,2) blade diameter mm. 350 with 90° blade : max height cut mm. 110 width max. cut mm. 130 with 45° blade : max. height cut mm. 110 max. width cut mm. 92 machine weight kg. 90 Duedpfx Ajm Ak Eloixju extractor cabinet weight kg. 50

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling Machine Condition: Used Year of manufacture: 2002 Technical Data Dsdpfx Asyrgk Eoixeuu Tool holder: SK 40 Tool stations: 16 positions Travel X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm rotary table Motor power: at 100% duty cycle 9 kW / at 40% duty cycle 13 kW Connection total: 17 kVA Weight: approx. 3000 kg Dimensions LxWxH: approx. 2100 mm x 1520 mm (without peripherals) / approx. 2140 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11035534144, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment term is one week after purchase of the machine! Bidding obligates the buyer to collect the machine on time between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate in X, Y, and Z axes: 10,000 mm/min Maximum spindle speed: 9,000 rpm Tool holder: SK 40 Max. tool length from spindle nose: 290 mm Max. tool weight with automatic tool changer: 6 kg Max. total tool weight in magazine: 50 kg Clamping area: 700 x 500 mm Rotary range: 360° Swivel range: +95/-10° Permissible worktable load: 200 kg MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & weight Dimensions (L x W x H): 2,300 x 2,000 x 2,300 mm Djdpfoxm T I Esx Aixsuu Total weight: 5,000 kg EQUIPMENT 16-position tool changer Rotary table with swivel axis Mechanical table plate clamping Note: The machine vices shown on the table are not included in the scope of delivery.

Condition: used, Year of construction: 2016, functionality: fully functional, Shipping Line/Roller Conveyor System/Conveyor System, Conveyor Technology approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Dujdpfox Ala Eex Aixsu Model: Shipping Line Condition: Used Year of Manufacture: 2016 The system consists of: 1 x Inclined Belt Conveyor approx. 3.2 meters in length 2 x Pneumatic Lifts 3 x 90° Curves 2 x Flap/Passage Elements 1 x Control Cabinet 25 height-adjustable feet and the remaining conveyor line/roller conveyor approx. 40 meters Total length: approx. 50,000 mm Total width: 750 mm Conveying width: approx. 680 mm Roller diameter: 50 mm Internal article number: 2025120101 Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was fully operational up to its dismantling. Thanks to the superior workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to provide a tailored offer or consult you on design or installation queries. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our excellent network of experts. We have successfully delivered projects for companies in various industries such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will develop solutions to optimize your processes and material flow efficiently and sustainably. We can also offer fully automated sorting technology and complementary components like picking shelves or containers.

Condition: new, Year of construction: 2024, pressure 50 t throat 230 mm stroke 12-110 mm no. of strokes 40-100 Hub/min Djdpfx Asvfhqpoixjuu ram - range of adjustment 70 mm table surface area 740x440 mm table height 840 mm hole in the table Ø 140 mm ram surface 460x300 mm tool hole in ram Ø 45 mm total power requirement 4 kW weight of the machine ca. 3,4 t dimensions of the machine ca. BxTxH 1500x2500x2510 mm

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm Dsdoyv Iplspfx Aixjuu x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle of 90° Bevel gear analysis ROTEC T50 GA2 Color unit company Binks

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank right/left rotation motor brake socket for feed unit Protective covers for hand milling spindle Ø 30 mm Aigner stop suction connection 2x 120 mm Dsdeiinm Hspfx Aixeuu speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2Y394L01382, Year of construction: 2022, operating hours: 4,782 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 3,700 mm Overall height: 2,900 mm Free lift: 150 mm MACHINE DETAILS Mast type: Standard Drive type: LPG Battery: 12 V starter battery Operating hours: 4,782 h EQUIPMENT Former Linde full-service unit Safety inspection (UVV) until 02/2027 Next service due in 518 operating hours Note: Mast removal costs €750 net. All dimensions are approximate. No liability is assumed for any writing or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT prior appointment from Monday to Friday, 7:00 am to 4:30 pm. If the mast is too high for transport, it can be dismantled on request. Duodpfx Aeytn I Ioixju If the machine is not collected within the agreed deadline, a storage fee of €20 per machine per day applies (additional charges must be paid before collection).

Condition: used, functionality: fully functional, load capacity: 5,000 kg, fork length: 1,200 mm, empty load weight: 467 kg, construction width: 1,600 mm, opening width: 1,192 mm, Fork positioner Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical condition: Good Description: As-is condition upon return from use. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Please feel free to browse our website, fleischmann-foerdertechnik. Leasing & financing as well as delivery at favorable terms can be requested. Trade-in of Linde equipment is also possible – even if you do not purchase a unit from us. The specified operating hours were read at the time of listing. Subject to prior sale, modifications, and errors. Djdpfx Aieyadchsxeuu Suitable for Linde Standard Mast BR388 Mast type 1516 and Linde Standard Mast BR394 Mast type 189.

Condition: new, Year of construction: 2025, machine/vehicle number: 650462292, Additional options and accessories Notes MARINI IRON T-BOX 50 MOBILE ASPHALT MIXING PLANT Year of construction: 2021 Operating hours: New Dusdpfx Aiohd Nb Ijxsu - Production capacity: 50 to./h. - CE Certificate - Mobile: 1x sea container 40' HC - Feed hopper: 3 - Capacity: 5 m³ - Drying drum: continuous - Burner: Marini CF 04 with 7,3 MW - Mixer: rotating - filter system: 180 m² filter area - control cabin with automatic and manual control system Marini - 1 year warranty Input errors and mistakes in this offer are expressly reserved. Only the concrete agreements in the order confirmation or in the sales contract are decisive. more construction machines and mixing plants on our website Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,