Used Tilting Cube Table For Radial Drilling. for sale (24,399)

Condition: used, Year of construction: 2011, machine/vehicle number: JP - 0160201, Motorized welding and tilting table with height adjustment Ref. No. 26069 Technical Data: - Max. load capacity in horizontal position: 15,000 kg - Faceplate diameter: 1,800 mm - Faceplate motor-driven tiltable: 0 to 120° - Table height adjustable Podpfxsywtt So Adlogk - Rotational movement electrically, steplessly adjustable: 0.04 to 0.80 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V / 5.5 + 7.5 kW - Minimum table height in horizontal position: approx. 1,700 mm - Intermediate table heights in horizontal position: approx. 1,900 + 2,100 mm - Maximum table height in horizontal position: approx. 2,300 mm - Handheld remote control - Required installation space: approx. W 2,100 x H 1,700 x D 2,400 mm - Weight: approx. 8,500 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Pgedpfjyuqmijx Adljk Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: like new (used), functionality: fully functional, throat depth: 1,200 mm, We offer this Bergonzi TR 40 radial drilling machine, year of manufacture unknown. Psdpfx Adsynw Adelegk MC4 Reach 1200 In truly like-new condition. Runs smoothly, a very tidy machine. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, bore capacity in steel (diameter) 40 mm arm length 1600 mm bore capacity in cast iron 60 mm spindle diameter 85 mm tool taper MK 5 speeds 24 - 1050 U/min feeds 0,06 - 1,0 mm/U Psdjyrtxvspfx Adljgk column diameter 345 mm vertical adjustment of the arm 900 mm thread cutting attachment ja Boring motor 5,5 kw total power requirement 7,5 kW weight of the machine ca. 4000 kg dimensions of the machine ca. 2,5 x 1,0 x 2,99 m Radial drilling machine - Mounting cube 750 x 500 x 500 mm - Digital display for boom travel - Coolant system - Good condition

Condition: used, Year of construction: 1979, arm length 1600 mm taper MK 5 weight of the machine ca. 3 t Psdpfx Asyigbcedlegk

Condition: new, Year of construction: 2025, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Pgodjtzkmbjpfx Adlek Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition Pgjdpfxjd E A I Ns Adlsk

Condition: used, Clamping table, sine table, tilting table Tilting clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Tilting angle: 2° Tilting angle max.: 7° - Tilting angle 2° via leadscrew - Max. tilting angle 7° manually lifted to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Pgsdoinldpspfx Adljk Good condition Clamping plate, ideal for production of wedge strips

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled, ribs rest flat and support - Ideal as a base plate Psdpfx Ajh R D Uzsdlogk Net weight 1140 kg good condition

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 - 4x T-slot Weight approx. 120 kg Pgodegp T D Nepfx Adlsk

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW Pgodpfeyhq T Nsx Adlsk total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: good (used), Year of construction: 1998, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: - Table 1800 x 600 mm, 4 T-slots Psdjyplb Rjpfx Adlegk - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Pgedpfx Aolhwr Rsdljk Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: ready for operation (used), Servo-driven tapping and threading machine, Used machine Manufacturer: Electric Servo Model: M12H Dimensions: Width: 700 mm Psdpfx Aoxdfauodlegk Depth: 150 mm Height: 520 mm Radius: 1100 mm Comes with Tap Torsion GT 12-0316 chuck set: 3.5 × 2.7 M3 4.5 × 3.4 M4 8 × 6.2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 M12 Torsion u-9

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK engine output 5,5 kW Pedpowiikdefx Adlogk weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Pgodoynt Ucopfx Adljk Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Pjdpfxsuix Sgo Adljgk Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg Pgjdpfx Adow Hanholsk

Condition: ready for operation (used), Radial Drill, Used Equipment Brand: CSEPEL Model: R.F. 2a Description: Column Diameter: 350 mm Vertical Travel of the Arm: 1200 mm Pgedpfx Ajw Db Nujdljk Horizontal Travel of the Drill Head: 1000 mm Vertical Travel of the Spindle: 400 mm Spindle Diameter: 65 mm 12 Spindle Speeds: 47.5 – 2100 RPM 8 Feed Rates: 0.048 – 1.2 m/min Motor Power: 9 HP

Condition: used, Year of construction: 1985, functionality: fully functional, Universal turn & tilt table from MAHO 800 Pgjdpfeb I Irwex Adlsk with mechanical y-adjustment via hand wheel

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, actuation type: electric, rotational speed (max.): 1,700 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 630 mm, table length: 800 mm, overall weight: 3,500 kg, Equipment: documentation/manual, The industrial radial drilling machine features a simple and rigid construction, ensuring reliability and stability during operation. It offers a wide range of applications in hole machining, including drilling, reaming, countersinking, boring, and tapping. Technical specifications Maximum drilling capacity: 50 mm Distance from spindle nose to table: 400–1580 mm Distance from spindle axis to column: 370–2000 mm Spindle travel: 400 mm Spindle taper: MT5 Spindle speed range: 25–1700 rpm Number of spindle speeds: 16 Column diameter: 350 mm Main motor power: 4 kW Table dimensions: 800 × 630 × 500 mm Psdpfxoytf Thj Adlegk Weight: 3500 kg Dimensions: 2500 × 1070 × 2840 mm Sales conditions The machine is brand new 12-month warranty Warranty service Post-warranty service Delivery to the customer is available. The delivery cost is determined individually based on the quotation provided by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 1978, machine/vehicle number: 78004, type of input current: three-phase, We are offering this used Csepel 12UH/1600 radial drilling machine, year of manufacture 1978. Model: 12UH/1600 Serial number: 78004 Power type: 3~ Wiring diagram no.: 358000 Pgodoyh Uaqjpfx Adlok If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, The KNUTH KSR 50 VT is a high-performance radial drilling machine that belongs to the Radial Drilling Machines category. Designed with "Tool to the workpiece" in mind, this machine offers exceptional flexibility with clamping surfaces on three sides to accommodate various applications. Built from thick-walled high-grade cast iron, the KSR 50 VT features a robust structure, ensuring durability and precision during operation. The electronically controlled servo quill feed and large touchscreen display enhance user experience, allowing for seamless adjustments of machining parameters. Ideal for single and small series production, it shines in maintenance activities and tool as well as steel construction. With a drilling capacity of 50 mm and a table setup area of 1,200 x 505 mm, the KSR 50 VT is versatile enough for diverse tasks. Buy now to elevate your drilling capabilities with this advanced radial drilling machine. Pedeyfl Uvopfx Adlsgk

Condition: used, Year of construction: 2002, bore capacity in steel (diameter) 50 mm arm length / mm workpiece height max. / mm Drilling capacity in steel (diameter): 50 mm throat depth: 1600 mm Spindle stroke: 315 mm Tool holder: MK 5 Total power requirement: 4.0 kW Machine weight approx.: 3.5 tonnes Space requirement approx.: 2.5x1.1x2.8 m Pgjdpfx Adjv H Ermeljk

Year of construction: 1998, condition: good (used), LISEC UKL-35/23VM Glass tilting table With castor rollers With control panel Maximum glass length: 3500 mm Very good and clean condition Psdpfxjqwyx Sj Adljgk As is Available immediately