Used Trestle Bearings for sale (2,991)

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control Lhedsdv Eu Hopfx Aazel - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width 600 mm steam hood with electromechanical lifting system Suitable for steam injection (to heat up and to improve product yields) 180 kW / 275 A with lecithin bath steam connection DN 40 suitable for CIP cleaning system outside dimensions (l x w x h) : ± 8.800 x 2.000 x 3.200 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled Lhsdpfxszx Urcj Aazol General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Lhjdpszx Unwsfx Aazel Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: Ljdpfx Aoxaafdjazehl - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: new, x-travel 1000 mm y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 320 mm feed: H 80 - 830 / V 23-625 mm/min. turning speeds H 35 - 1500 / V 45 - 1660 U/min distance spindle /table H 30 - 430 / V 210-610 mm rapid traverse Z Achse 750 mm/min throat 305 - 805 mm T-slots 3 x 14.0 mm table - swivable ° workpiece weight max. 300 kg coolant pump 25.0 L/min. total power requirement 7.6 kW weight of the machine ca. 1540 kg range L-W-H 1840 x 1830 x 2050 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool Lhsdjxaagnspfx Aazel

Condition: new, 6 St. 100 kg range L-W-H 705 x 736 x 1019 mm weight 126 kg Lhedpfew U U Rfsx Aazjl Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position Lhedpfx Aoxaabfjazjl - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, pressure 135 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm oil volume 300 ltr. voltage 400 Volt total power requirement 15.0 kW weight 10800 kg range L-W-H 5100 x 2100 x 2850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German Lsdpfx Aajxaa U Eezehl - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, saw blade diameter 600 x 30 mm capacity 90 degrees: round 215 mm capacity 90 degrees: square 195 x 195 mm capacity 90 degrees: flat 140 x 395 mm capacity 45 degrees: round 170 mm capacity 45 degrees: square 170 x 170 mm capacity 45 degrees: flat 100 x 175 mm turning speeds 2800 U/min Lsdpexaccfsfx Aazehl total power requirement 3.0 kW weight of the machine ca. 310 kg range L-W-H 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from 0° to 180° right and left * In aluminum and light metal alloys * With rising saw blade * With extremely large cutting range (saw blade diameter 600 mm) * Digital display for angle adjustment from 0° to 180° - Manually opening safety cover - Hydro-pneumatic saw blade feed (via two-hand operation) - 2 pneumatic vertical vices with quick adjustment - Heavy-duty cast iron construction ensures vibration-free . . operation and maximum precision - Large bearing-mounted turntable with internal indexing at 0/45° * Ensures quick adjustment for miter cuts - Extractor nozzle for connecting a chip extraction system - Pneumatic spray system for cooling and lubricating the saw blade - Machine base frame - Powerful saw drive with 3-phase 3HP motor Included in delivery: - 1x carbide saw blade ø 600 mm - Blow-out gun - Full protective cover - Tool set - Detailed operating instructions, maintenance manual, etc.

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display Lhedpfx Aajxacdvjzjl * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. Ljdpfx Aszcqzijazohl range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display Lhedpfjxabcwex Aazsl - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 1000 kg throat 95.0 mm table length 120 mm table width 120 mm total power requirement manuell kW weight of the machine ca. 17.0 kg dimensions of the machine ca. 270 x 130 x 330 mm Description: Lhedpfx Aexabdusazel - For pressing in and out bearings, bushings, etc. - Made of torsion-resistant steel - Includes mounting holes, ideal for mounting on a workbench - Suitable for bushing removal, straightening, bending, reaming, etc. - Adjustable lever bar, depending on the required force - Ideal for repair shops and general workshop use

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/min return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 9800 kg range L-W-H 4150 x 2150 x 2800 mm Lhedpfx Asxabfxeazjl ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/sec Lhsdpfx Ajxaah Ssazsl return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 12100 kg range L-W-H 5.100x2.150x2.850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm links capacity 45 degrees: round 110 mm rechts capacity 45 degrees: square 100 mm links capacity 45 degrees: square 95 mm rechts capacity 45 degrees: flat 135 x 60 mm dimensions of saw-blade 350 x 32 turning speeds 1700 / 3400 U/min capacity 45 degrees: round 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 210 kg dimensions of the machine ca. 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side Lhjdpoxaai Nsfx Aazol - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The head can also be tilted up to 45 ° - Powerful, 2-stage drive with double V-belts - large turntable with bearings - Lubrication device with mechanical diaphragm pump - Extraction nozzle for connecting a chip extractor Scope of delivery: - Adjustable length stop 600 mm - tool kit - Instructions with wiring diagram - Crane eyes for transport * The machine is delivered without a saw blade Special accessories: - including base

Condition: new, cutting diameter 250 mm Ledpsxabpwofx Aazohl capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. Lsdpfxexabuyj Aazehl dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, x-travel 600 mm y-travel 250 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1120 x 260 mm feed: 24 - 402 mm/min. turning speeds 45.0 - 1660 U/min distance spindle /table 175 - 520 mm rapid traverse Z Achse 660 mm/min throat 0 - 550 mm total power requirement 2.2 kW weight of the machine ca. 1380 kg range L-W-H 1570 x 1470 x 1660 mm Equipment: - Universal milling head, adjustable to all angle positions - Swiveling control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable wedge strips in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath Lhjdpfxjxaa Hzj Aazjl - Positioning motor for z-axis included in delivery - Automatic table feed in x and y axes as standard - Precisely surface-machined cross table with T-slots - Digital position display for x, y and z axes included in delivery Scope of delivery - 3-axis digital display ES-12 H with LCD display - LED machine light - Coolant system - Central lubrication - Counter bearing - Long milling mandrel 32 mm - Feed for x and y axes - Positioner motor for z-axis - Coolant pan - Adjustable protective device - operating tool

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table Lhsdsxaaqtjpfx Aazsl * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm Ledszkbn Ijpfx Aazohl min. dia. ca. 190 mm roll diam. toproll 140 mm bending speed 3.0 m/min engine output 2.2 kW weight 1420 kg range L-W-H 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: good (used), Year of construction: 2000, sheet width 3100 mm Lhjdpfx Aaszycpxszel plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: new, INA K 811 52 A axial cylindrical roller bearing, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ledpfxji Ea Ugj Aazohl

Condition: used, Year of construction: 2019, operating hours: 3,163 h, 2019 | JCB JS145LC 4F | Used Tracked Excavator | 3163 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 44000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 54 approved ✅ 7 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: A well-functioning JCB excavator with some areas needing attention: lowering the boom encounters a point where it becomes heavy, excessive play in slewing and driving, audible slewing bearings, broken top window (rain can drop directly onto the dashboard inside the cabin), alternator light comes on (batteries are OK). Lhodpfxez D Ttyj Aazsl 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40879 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 12 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,263 kg, empty load weight: 737 kg, loading space volume: 10 m³, loading space width: 1,720 mm, loading space length: 3,735 mm, loading space height: 1,800 mm, Price upon request. The price is valid ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible. 3 units in stock, RAL 7043 13 units available shortly, RAL 7043 Other designs and sizes available from our Paderborn warehouse. You can view our current stock on our website. Skip containers according to DIN standard. Technical description: * Internal dimensions: 3735 x 1720 x 1800 mm Ljdpfx Aez Arn Ajazjhl * Usable volume: 10 cbm * Tare weight: 737 kg * Bottom: 5 mm S235 * Sides: 3 mm S235 * All sheets and profiles continuously welded * Asymmetrical * Container tested and approved according to DGUV Rule 114-010 * Corner reinforcements * Double-sided 3-point tilting bearing (bolts Ø45) * Stacking rail L-profile * Locking bar * Frame edges U 80x50x4 * Zinc phosphate primer inside and outside, painted on the outside with synthetic resin paint (80-100 μ) * Permissible total weight 10,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price is per unit plus 19% VAT. If you have any questions, please send us a message or call us.