Used Trimming Line for sale (11,300)

Condition: used, Year of construction: 2009, Overview This LM S.p.A. multiline divider is a lane-dividing system for bottle conveying, built in 2009 by LM S.p.A. (Modena, Italy). It sorts a single-lane bottle stream into up to 4 lanes and is offered together with a complete bottle conveyor system manufactured by GEA Procomac - approximately 40 metres of multiline conveyors plus the divider unit. The system is still installed and under power in a German water and soft-drinks bottling plant, remains in production until 30 September 2026, and can be visited in operation. Technical data - Manufacturer of multiline divider: LM S.p.A. (Modena, Italy) - Manufacturer of bottle conveyors: GEA Procomac - Year of manufacture: 2009 - Machine type: multiline divider with bottle conveyor system - Lane division: up to 4 lanes - Capacity: min. 12,500 bottles per hour - Conveyor length: approx. 40 m (multilines) plus divider Scope of delivery - LM S.p.A. multiline divider - GEA Procomac bottle conveyor system, approx. 40 m - Drive units, guide railings and safety guards as installed Condition Guodpfx Aqjzuc Rxeijf The equipment is in very good condition. It is still installed and under power and remains in production until 30 September 2026; operation can be demonstrated on site. Availability Available from 7 October 2026. The equipment will be dismantled and loaded onto the buyer's trucks by the seller between 7 and 10 October 2026. Location: Germany.

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray Guodpfx Aqsyb Tuisiof - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, machine/vehicle number: 008686, Position 1: Panel Feeding and Loading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 2: Multi-Blade Panel Saws KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 3: Panel Feeding and Loading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 4: Multi-Blade Panel Saws KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 5: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 6: Double Squaring Machines KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 7: Roller Conveyors KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 8: Double Squaring Machines KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Gjdpfezk Uxgsx Aqijuf Position 9: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 10: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 11: Vertical Storage Systems KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 12: Panel Stacking and Offloading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 13: Cardboard Closing Stations KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 14: Robot KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 15: Strapping machine KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 16: Spiral Wrappers KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Guedpjqy Em Njfx Aqisf Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1 Gsdpfxow Idbye Aqisuf

Condition: good (used), Power cable, crane cable, conductor rail, plastic conductor rail, plastic conductor rail with junction box, safety conductor rail, compact conductor rail -Manufacturer: Vahle, plastic conductor rail with junction box -Type: KNKST 4/60 HS -Item No.: Dimensions: 1000/155/H190 mm -Weight: 3.0 kg Gusdszt H I Sjpfx Aqiof

Condition: used, pressure 1000 t table length 2110 mm table width 1755 mm stroke 500 mm 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Weights Stand: 47.1 T Table: 8.84 T Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Gujdsgrnaqopfx Aqijf Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear Gujdpfxody Dtre Aqijf

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Gsdpozuk Tnefx Aqiouf Other: All documentation available in German The machine was originally used for biomaterials

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), in very good condition, 100% functional. Gsdpfxei Eblaj Aqiouf

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Gedpfx Aqjzb Dp Reiouf Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Guodpfx Aqozb Dr Sjiof Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: refurbished (used), Year of construction: 2003, Seewer Rondo Croissomat SCMG for the production of filled and unfilled croissants, the pneumatic filling depositor deposits soft to firm fillings in two to four rows. It even processes fillings with small pieces of fruit or vegetables without difficulty year of build 2003 for filled and unfilled croissants laminated and non-laminated doughs up to 900 unfilled croissants per row per hour (max. 4.500 units), two to five rows up to 700 filled croissants per row per hour (max. 2.800 units), two to three rows Gusdpfx Aewgwwgeqiof calibrator year of build 1997 pneumatic filling depositor year of build 2006 usable dough-sheet width approx. 530 mm speed of conveyor belt 9 m/min 1 stamping knife is included, additional stamping knives are available on request pictures BEFORE reconditioning

Condition: refurbished (used), Year of construction: 2008, Rademaker Crusto Bread Line 600 mm. The Rademaker Crusto Bread Line is a versatile production line for manufacturing a wide range of artisan bread products. Designed for gentle dough handling and consistent product quality, this line combines dough sheeting, gauging, folding, cutting, topping and product transfer in one efficient production process. The line is equipped with a fully automatic Siemens PLC control system with colour touchscreen, allowing quick recipe selection and easy operation. Thanks to its modular design, the line can produce various bread products with high flexibility and consistent results. year of build 2008 suitable for production of Ciabatta Folded bread Artisan baguettes Coffee bread (Kranssi) Muhku Niittypitko Various folded and topped bread products main features 600 mm working width Gedpezub Rqjfx Aqisuf X-Pack dough sheeting system Multiple flour dusting stations Quick reducer gauging station Two-roll gauging station Cross roller Dough lane spreading conveyor Folding module Guillotine cutting module Diagonal baguette cutter Water spray unit Universal topping module Retracting belt Siemens PLC with colour touchscreen Recipe management Capacity Muhku – up to 10,000 pcs/hour Ciabatta – up to 7,200 pcs/hour Folded bread – up to 4,800 pcs/hour Coffee bread Kranssi – up to 2,000 pcs/hour Niittypitko – up to 2,000 pcs/hour Capacities depend on product dimensions, configuration and dough characteristics. Technical specifications Working width: 600 mm Voltage: 3 x 400 V + N + PE, 50 Hz Control voltage: 24 VDC Power consumption: 21.9 kW Average air consumption: 196 Nl/min Maximum air consumption: 548 Nl/min Dimensions: approx. 21,000 x 3,000 x 6,000 mm

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Godpfozimgtox Aqieuf Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Guedpfx Aqjzra Rqsief Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: used, Line 4 Can Filling LIne Gedezl T Sbopfx Aqisuf 130 cans/min capacity 900g can weight 127mm can diameter comprising: Cap UV system with 3 Rittal Heraeus P6062.30S UV lamp units Cap inverter UV tunnel and conveyors Motorised Scoop Hopper with swan-neck conveyor Fully automated scoop sorting line with 2 Aylesbury Automation Euro 630 bowl feeders Isoma empty can rinser/ inverter S/N P160/CRL4. YOM 2016 Jorgensen fully automated depalletizing system Accusort AL5010 4 head Barcode reader with associated conveyor and controls Heraues H4087 Twin Lamp empty can UV tunnel Del Packaging BLE-35 motorised incline conveyor Del Packaging RF-6200 rotary capper feeder with integral UV tunnel Amberflex Spiralveyor SV spiral conveyor (2015) Thermo Scientific Ramsey Versaweigh checkweigher (2018) Domino case labeller with stand Oryx Automation CMWAP50 fully automated case packing machine Mettler Toledo Garvens XS3 automatic checkweigher with reject system and table Accusort AL5010 4 head barcode reader (2007) Del Packaging IPCN401-502 capper with cap detection (1993) Sleever International fully automated sleever Domino D620i twin head laser coding machine CSW Mini Multifeeder wide/54-MMFwide -01 can end feed system (2011) Heraues H4087 twin lamp full can UV tunnel Jorgensen 94302A outfeed can cleaner (2003) Dylog DYXIM D pass through X Ray machine (2015) Del Packaging CLPS scoop docking and over capping machine with scoop in cap detector system Shibuya Hoppmann scoop dropper feed and place system Shibuya Hoppmann Scoop dropper feed and place system with hopper JBT International 16 head rotary filler with 2 Mettler Toledo C Series checkweighers Isoma De-Eevator 01 can De-Elavator (2020) Heraues H4087 4 lamp top and bottom side UV tunnel Terlet 4 chamber vacuum and gassing system (1993) Please note : the following machines have been removed Angelus 56P can seamer (2007) Angelus can seamer Line 4 complete comprising items EU575759 to EU575790 Please note, this lot 30466-348 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-349 to 30466-374 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections Gedpfxszuhbio Aqisuf • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Gujdezug Dpspfx Aqijf Machine Benefits Technical Machine Benefits • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt

Condition: excellent (used), Silverson 275 LS High Sheer In Line Mixer / Homogenizer Guodpfeym Akkox Aqiof 1.5" Inlet & Outlet 3 ~ Removed from the stores of a pharma plant in Cork, Ireland. Device is in excellent condition.

Condition: used, mileage: 166,509 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2017, emission class: euro6, color: other, number of seats: 24, Year of construction: 2017, Equipment: ABS, air conditioning, disability-friendly, = Additional Options and Accessories = - Driver's air conditioning - Air conditioning - Wheelchair lift - Webasto Gsdpfx Aqeztxibeieuf = Additional Information = Height: 290 cm Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/- 20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have numerous buses of all brands, capacities, and models in stock, covering every price range. We can find the right tourist, school, or city bus for you, tailored to your needs or budget. All information is provided without guarantee. Errors, prior sales, and typographical errors are reserved. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: used, mileage: 207,417 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, first registration: 03/2015, emission class: euro6, color: other, number of seats: 24, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - Air conditioning for the driver - Webasto = Additional Information = Height: 290 cm Damage: none = Company Information = Gsdpfxoztw N He Aqijuf We are an international company based in Belgium, in the vicinity of Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as an exhibition space. We always have numerous buses of all brands, capacities, and models in stock, covering every price range. We can find the right tour, school, or public transport bus for you, tailored to your needs or budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: excellent (used), Rademaker block processor with Rondo make up line. Has been producing 'Salmon en croute' for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Godpfsiabu Uox Aqijuf Mainly used seasonally so only 11,800 running hours.

Year of construction: 2022, condition: used, - Model: Classic Line 2 FE - Year of manufacture: 2022 - Load capacity: 800 kg - Collection capacity: 205 liters - Dimensions: 1,236 x 815 x 360 mm - With grating Gujdpfx Ajzrvk Tjqisf - Steel construction - Color: blue (powder-coated) - Weight: 64 kg

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm Gjdpfov I Akvsx Aqiouf - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035