Used Trumpf Trubend 5320 for sale (468)

Condition: repair required (used), functionality: limited functionality, Year of construction: 2014, TRUMPF TruLaser 5030 fiber Year of manufacture: 2014 5,000 Watt TruDisk 5001 Siemens 840D SL Special price due to site closure / insolvency Update 05/27/2026: The machine has been thoroughly cleaned. It is in considerably better condition than can be seen in the photographs. For sale is a used TRUMPF TruLaser 5030 fiber from 2014. The machine was in continuous productive use until 2025 and, according to the previous owner, operated without any known problems. Subsequently, the system was shut down for approximately one year as part of an insolvency and was no longer operated. Currently, the machine is not connected and therefore cannot be demonstrated. Ideal machine for a buyer who wants to refurbish, clean, connect and put the system back into operation themselves. For this purpose, the machine is available at an exceptionally attractive special price. Extremely affordable. Purchase price in 2014 was approximately EUR 300,000. Technical data Manufacturer: TRUMPF Model: TruLaser 5030 fiber Year of manufacture: 2014 Machine type: Laser cutting system Laser source: TRUMPF TruDisk 5001 solid-state laser Laser power: 5,000 W Control system: Siemens 840D SL Working area / max. sheet size: 3,050 x 1,550 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Rapid traverse: 280 m/min Max. workpiece weight: 900 kg Max. sheet thickness: 10 - 25 mm according to documentation Operating voltage: 400 V / 50 Hz Machine weight: approx. 12,000 kg Installation dimensions L x W x H: approx. 9,500 x 6,300 x 2,500 mm Color: gray / blue Cabin: Protective cabin Equipment TRUMPF TruDisk 5001 solid-state laser Laser cooling unit Cooling unit for system Universal cutting head Multi-chamber extraction system Light barriers Electric roll-up roof Hydraulically adjustable pallet changer Protective cabin Notes on condition Machine currently not connected Test run currently not possible Operating hours could not be read out Machine was idle for approximately one year due to insolvency Connection cable to the main power supply has been cut, must be replaced Machine, cooler and extraction system should be cleaned and technically inspected Filters / maintenance should be renewed or carried out before recommissioning Podpfxey Tmcxo Apvsgl Machine documentation is not completely available according to the expert opinion, but the manuals can be quickly obtained digitally Positive aspects Cutting head was renewed in 04/2021 Machine was in use until 2025 Very interesting basis for self-refurbishment Remarkable special price possible Sale Location: Germany Availability: immediately Price: on request / special price Condition: used, currently not demonstrable Sale from location, as inspected Errors, prior sale and technical changes reserved.

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,100 h, control type: CNC control, laser power: 4,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 310 mm, pipe length (max.): 3,000 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, Equipment: cooling unit, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 3030 fiber (L49) (A1) 11/2013 4 kW 3. Technical Specifications Working area: 3000 × 1500 mm Operating hours (04/2026): Beam ON: 9,100 h Machine ON: 31,000 h 4. Maintenance & Condition - Maintained annually by TRUMPF - New IPC installed in 01/2026 (cost: 12K EUR; old IPC with broken network port can be used as a backup) 5. Standard Machine Configuration Working Area & Machine Design Working area: 3000 × 1500 mm Fully enclosed machine frame Enclosed beam guidance via light cable (LLK) Integrated cabinet with roller shutter Sliding roof Working area illumination Integrated electrical cabinets with interior lighting Drive & Motion System Torque drive combined with linear direct drives Automatic pallet changer in longitudinal direction Longitudinal conveyor belt Process Support Cooling unit Positioning laser diode Spray device Automatic nozzle cleaning Transport and installation equipment Cutting Technologies PierceLine FocusLine NitroLine PlasmaLine Microweld 6. Laser Standard Laser Configuration Integrated solid-state laser with 1 LLK output Pump diode excitation Laser power control Extended Laser Configuration TruDisk 4001 solid-state laser with 1 LLK output Upgrade capability for max. 1 additional LLK output on the TruDisk 7. Cutting Unit Standard Configuration Universal cutting unit Single cutting head strategy Protective glass against lens contamination Protective glass condition monitoring ControlLine: height control and sheet edge detection Extended Configuration Nozzle changer DetectLine: precise sheet position detection Copper cutting package (including cutting data for N2, O2) Brass cutting package (including cutting data for N2) 8. Control System & Software Operation & Programming TruTops Laser via network access (customer-provided PC required) Easy workshop programming Fast reproduction of jobs Integrated technology database Automatic shutdown function Programmable cutting gas / pressure selection Control System Sinumerik 840D SL control system 17" touch color display Software & Process Functions ContourLine Microweld FastLine FlyLine AdjustLine Remote teleservice via internet 9. Data Transfer & Interfaces Standard Interfaces USB interface RJ-45 network connection Extended Interfaces MDE interface 10. Safety & Environmental Systems Safety Features CE certification Pgedpfxoy S U N Rj Apvol Light barriers Machine enclosure with certified viewing window (right-side door) Extraction & Dust Protection Multi-chamber extraction system Compact dust extraction unit Dust protection for equipment sheet metal 11. Material Handling & Automation Conveyor & Handling Systems Wide cross conveyor with tilting container Container positioned on the left side of the machine Automation Options LiftMaster retrofit 12. Tube Cutting Device / RotoLas Tube Processing Equipment Tube cutting device incl. 4 internal and external jaws (including electric roller roof, left-side sliding inspection door for enhanced visibility, and accessory trolley; integrated cabinet with roller shutter omitted) Components Automatic chuck External support for tubes up to 3 m (incl. 1 stepped roller) Base jaws for additional clamping sets Prism clamping set First base carrier with shifting device (longitudinal pallet changer) Additional base carriers 2 × workpiece carriers D 15–310 mm Clamping claws (2 pcs.) 13. Warranty / Sales Notice No warranty Purchased as is.

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 27,169 h, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V130 Pgedpfxey Ryfuo Apvol Year: 2000 Technical Data Brand: TRUMPF Model: TrumaBend V130 Year of manufacture: 2000 Operating hours: 27,169 h (read off) Press force: 130 t Bending length: 3050 mm Stroke: 365 mm Operating pressure: 340 bar Dimensions: approx. L 3.80 x W 2.40 x H 2.95 m Weight: approx. 13 t Equipment • Controlled axes: Y1, Y2, X, R • Movable support arms • CNC controlled crowning • Delem 2D graphical control • Hydraulic upper tool clamping • Pneumatic die displacement • Upper tool: straight 28°, R1.0, H 140mm, L = 3,050mm, segmented • Die V12/30°, R1, H 100mm, L = 3,000mm, segmented • Die V30/80°, R5, H 100mm, L = 3,000mm (6x500) • Die V60/80°, R5, H 100mm, L = 3,000mm (6x500) All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: new, TRUMPF Laser 17x E11V 060050840, used, in good condition, 100% fully functional, scope of delivery as per photos Pgjdpfx Aoy Ntb Hopvjl

Condition: ready for operation (used), Trumpf 12-11-59-00/02 Radiation Protection B SN: , used, in good condition, 100% fully functional, scope of delivery as per photos. Pjdjy Ntbyepfx Apvjgl

Year of construction: 2013, operating hours: 19,392 h, condition: used, machine/vehicle number: 1683, (Beam in), TRUMPF CNC control, X-axis: 3,000 mm, Y-axis: 1,500 mm, laser power: 5 kW, loading and unloading table, chip/part conveyor. Pjdpfoy T Ny Tsx Apvsgl

Year of construction: 2007, condition: ready for operation (used), Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible. Podpfxsy U Nrfs Apvjgl

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Pgsdpfx Apoyxc Afsvol

Condition: used, Year of construction: 2013, Punching capacity 220 kN Pgodpey D T S Uefx Apvjl laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop

Condition: good (used), functionality: fully functional, Year of construction: 1985, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bosch, controller model: CC 300, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,300 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, workpiece weight (max.): 200 kg, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 16,800 kg, total length: 5,000 mm, total width: 5,000 mm, total height: 2,600 mm, Equipment: documentation/manual, We offer this good TRUMPF Trumatic 260 Rotation CNC punch, year of construction 1985. manufacturer: TRUMPF model: Trumatic 260 Rotation year of construction: 1985 condition: good category ID: 908 type ID: 1180 type: CNC punch If you have any questions or need more information, feel free to send us a message or give us a call. TRUMPF Trumatic 260 Rotation & Quicksharp Podpfxsy Ax I Eo Apvsgl ALL TOOLING INCLUDED • Punching Force: 250 kN (approx. 25-30 tons) • Footprint: L x W x H 5000 x 5000 x 2600 mm • Working Range (X x Y): 2500x1300 mm (plus optional repositioning) • Max Sheet Thickness: 6.4 mm • Max Workpiece Weight: 150-200 kg • Tooling: 10 stations (with 360-degree rotation of all tools) • Max Tool Diameter: 76.2 mm • Max Rotation Speed (C-axis): 360°/sec • Traverse Speeds (X/Y): Up to 90 m/min (X), 60 m/min (Y) • Control: Bosch CC 300 (typical) • Machine Weight: Approx. 16,000-16,800kg • Compressed air requirement: 6 bar • Motor Power Hydraulics: 7,5 Kw • Mains Connection: 380 volts, 50 Hz, 35 kVA

Condition: good (used), functionality: fully functional, Year of construction: 2013, AVAILABLE FROM October 2026 Punching force: 220 kN Laser power in watts: 4000 Travel range - x: 2500 mm Travel range - y: 1250 mm Cutting capacity in structural steel: 8 mm Cutting capacity in stainless steel: 8 mm Cutting capacity in aluminum: 6 mm Workpiece weight: 280 kg Machine weight approx.: 24,000 kg Dimensions: 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Traveling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws Pgedpfx Asy Tm Dpjpvol - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control etc.

Condition: good (used), functionality: fully functional, Year of construction: 2000, Punching force, max.: 220 kN Pgodpfx Asy Tl U Hspvel Sheet metal length: 2500 mm Sheet metal width: 1250 mm Laser power in watts: 3000 Sheet metal thickness: 8 mm Max. workpiece weight: 230 kg Machine weight, approx.: 23,000 kg Operating hours: - Laser on-time: 87,583 h - Beam on-time: 13,564 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 72,700 h, machine/vehicle number: A1220A1012, laser hours: 34,021 h, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, Laser cutting system + LiftMaster + 4 Stopa storage towers No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control system: Sinumerik 840D SL Working area: 3,000 x 1,500 x 115 mm Speed: max. 140 m/min Accuracy: 0.1 mm Laser: CO2 laser TruFlow 5000 with optimized standby mode Laser power: 5000 W Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 12 mm STOPA storage system with 4 towers Year of manufacture: 2006 Load capacity: 3 t Sheet format: 1,250 x 2,500 mm Storage capacity: 63 t Storage height: 3,800 mm Storage locations: 21 MACHINE DETAILS Operating hours: 72,700 / 34,021 h Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Voltage: 400 V 50 Hz Connected load: 105 kVA EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Position laser diode Spray system PierceLine FocusLine NitroLine PlasmaLine ControlLine ContourLine FastLine FlyLine Podpfx Ajy U Nf Sjpvogl AdjustLine Microweld Production plan Fast re-production Automatic shutdown Low-maintenance turbo radial fan Laser control TASC Laser cutting head with 250 mm lens Universal cutting head quick-change system (UTI) with bus connection LensLine with condition monitoring CE marking Light curtains Multi-chamber extraction system Laser monitoring system Compact dust extraction system

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Pgedpfx Apsy Rnb Dsvjl

Condition: used, Year of construction: 2020, operating hours: 31,623 h, laser power: 4,000 W, working length: 3,000 mm, working width: 1,500 mm, year of last overhaul: 2026, Machine Configuration: Standard Equipment: Machine - Working area: 3000 × 1500 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for high-precision processing - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLK) - Machine status light - Ambient operating temperature 5 to 40 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting unit - Single-head cutting strategy - Universal cutting unit with adaptive lens system - Protective glass - Online condition monitoring of protective glass Control - Fast reproduction - SINUMERIK 840D SL control - Ergonomic control panel with 21.5″ wide-screen multi-touch color display - Integrated technology data - Auto shut-off - Programmable selection of cutting gas/pressure - Microweld - Remote support interface - Production planning - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - ControlLine - FastLine - FlyLine - FocusLine - NitroLine - PierceLine - Copper cutting package - Brass cutting package Data transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Light barriers - Multi-chamber extraction system - Machine paneling with certified viewing window, right door Extended Standard Equipment - Compact dust extractor - Support slats made of construction steel - Network installation via remote support Podsy Sivfspfx Apvegl Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 4001 with 1 LLK output Additional Machine Functions - Drop&Cut - Integrated camera 1 for process monitoring Additional Cutting Packages - Highspeed Eco cutting package Extended Machine Equipment - Dust protection for device panel Data transmission - Wireless Operation Point Availability: approx. 6–8 weeks after receipt of order, at the earliest end of June 2026 Price: on request Current location: TRUMPF Reconditioning Facility Netherlands The machine is currently undergoing reconditioning!

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Trumpf TruPunch 2020 Podey S Adpspfx Apvogl

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine Pgjdpfx Apey Saqgevsl - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) Pjdpfx Ajy Sappepvogl - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 320 t, installation height: 615 mm, control type: CNC control, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid Pedpfx Apoy Sarqevogl + Additional foot switch

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts Psdpfx Aey Saqmepvegl TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Podpfoy Sanrsx Apvogl Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control Pedpfxey Samuo Apvegl - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), functionality: fully functional, Year of construction: 2011, laser power: 5,000 W, CNC Laser Cutting System TruLaser 5030 (L16) 5000 Watt X Working Area max.: 3000 mm Y Working Area max.: 1500 mm Z Working Area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser Power: 5000 Watts Operating hours: 56,521 h Laser on time: 23,563 h Sheet thickness St. max.: 25 mm Sheet thickness Va. max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit KKW Riedel from 2003 - TFT color display - Longitudinal conveyor for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow 5000 - Maintenance-free turbo radial blower - Cutting head with 250mm lens - Universal quick-change unit (UTI) with bus connection - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic shutoff - ConturLine - FastLine - FlyLine - Microweld Pgsdoy Saktspfx Apvsl - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi-chamber extraction system - Compact dedusting unit - High-speed cutting head 175mm focal length

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives Podpfx Ajy Sat Uspvegl - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management Pgodpfsy Sathex Apvol - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection