Used Truxor Suction Dredger for sale (2,434)

Condition: used, functionality: fully functional, machine/vehicle number: 34112, power: 315 kW (428.28 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, emission class: euro6e, suspension: steel-air, loading space volume: 13.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class FL including EX/II, EX/III and AT, weight variant 27 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, tire pressure monitoring, front guard assist, side radar, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air-suspended seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multi-function steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, preparation for alcohol tester, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, preparation for toll system, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor Tjdpfx Alez Hmaxe Aec ADR body with piston tank coding L4BH, total volume approx. 13.5 m³, usable volume sludge chamber approx. 11.5 m³, water chamber approx. 1.0 m³, tank wall thickness 6 mm, hydraulically opening full-size top lid with pneumatic hammer head locking (galvanized) and a suction connection at the bottom and top, suction connection for trailer operation at the rear left, 1x piston lock, piston with 2 piston seals and seal pressure regulation, tank content indicator - scale division in 500-liter increments, tank content indicator for the water chamber made of plexiglass tube on the right side, impact protection for the tank at the rear, vacuum pump CVS Vacustar 1300 (1200 m³/h) hydraulically driven, over-suction protection by 2 PVC balls, centrifugal separator with stainless steel brush insert and a stainless steel protective filter before the V-pump, high-pressure pump Speck NP 25/50-150 (approx. 50 L/min at approx. 120 bar) hydraulically driven, manually driven small reel with 60 m HD hose DN13 and spray gun, filling device for the water chamber consists of a Storz-C coupling, a hydraulically driven transport reel with 40 m (2x10 m and 1x20 m) suction hose DN 80 on the tank lid, 5x LED work lights, 2x on the right and 2x on the left on the tank and 1x at the rear, 1x removable and pivoting LED work light with 20 m cable, control cabinet made of stainless steel with louver on the right rear, outlet apron (ALU), hose box on the right and left (ALU), additional hose supports for surrounding hoses welded to the tank lid, lockable plastic toolbox, waste bin mounted at the rear (galvanized steel), ladder bracket and aluminum ladder, 2 fire extinguishers, 15 m grounding cable, rotating beacon, trailer hydraulics.

Condition: used, functionality: fully functional, machine/vehicle number: 34140, mileage: 10,900 km, power: 315 kW (428.28 HP), first registration: 09/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 13.5 m³, Equipment: ABS, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class FL including EX/II, EX/III and AT, weight variant 27 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, tire pressure control, front guard assist, radar on the side, starting assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), tires: front axle 385/65R22.5, rear axles 315/80R22.5 Cab color is white, M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort locking system with central locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, pre-installation for alcohol tester, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-installation for toll collection, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor Todpsz Hm I Nsfx Al Aec Equipment and design according to ADR (tank code: L4BH); total tank volume 13.5 m³; closing bottom covering the entire cross-section of the tank, opening upwards with 2 hydraulic cylinders; lid locking with tension claws, hammer head screws and linkage in galvanized design; centrally operated via a pneumatic cylinder, level indicator with 2 internal floats and external scale calibrated in 500 l increments for each piston position, discharge apron made of aluminum, emptying via pneumatically operated piston, piston with manhole DN 450 mm; 3-way adjustable piston with water/sludge volume division: position 1: approx. 10.3/3.2 // position 2: approx. 8.5/5.2 // position 3: approx. 6.5/6.5; vacuum pump: CVS VacuStar 1600L (1,550 m³/h at 400 mbar) water-cooled and mechanically driven, lower and upper suction and discharge connection DN 100 with TW coupling and blind cover pneumatically operated, suction connection for trailer operation at the rear left, suction hose cassette with simultaneous telescopic boom DN 125: the boom arm is hydraulically extendable up to 1,850 mm and hydraulically liftable up to 4,600 mm above the ground and can be swiveled 180°, either together with the high-pressure hose reel or independently of the high-pressure hose reel, incl. suction pipe approx. 800 mm long DN 125 mm and a Perrot M coupling, sludge water drain DN 80 for pushing the dirty water back into the sewer via the boom, HD pump URACA KD 718G (333 l/min at 170 bar) mechanically driven, large HD hose reel hydraulically swiveling 180° and hydraulically driven with sewer flushing hose DN 25 approx. 180 m long; small hose reel hydraulically driven with 60 m HD hose DN 13 mm and spray gun, rotating beacon, removable halogen work light with 20 m cable, ambient lighting with 4 LED spotlights switchable from the operating platform, operating platform mounted at the rear right on the superstructure as well as on the high-pressure hose reel made of stainless steel with louvers, remote control.

Condition: used, functionality: fully functional, machine/vehicle number: 35037, mileage: 3,700 km, power: 110 kW (149.56 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel, loading space volume: 4.2 m³, Equipment: ABS, air conditioning, airbag, cruise control, power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently being rented out! Further comparable vehicles are available upon request. 4-cylinder engine, features an ECO mode and start/stop automatic, low-maintenance automated manual transmission type Duonic 2.0 (dual-clutch transmission), ABS, ASR, ESP, disc brakes, emergency braking assist system (AEBS), Active Brake Assist 6, emergency brake light, tire pressure monitoring system, LED daytime running lights, LED headlights, leaf spring suspension, differential lock, hill start assist, lane keeping assistant (LDWS), front protection assist, attention assist, turning assist, ball-type trailer hitch, fuel tank with locking mechanism, main tank 100 liters. Cab with 3 seats, driver's comfort suspension seat, adjustable steering wheel, electric windows, heated and electrically adjustable mirrors, multi-function steering wheel, cruise control, radio with Bluetooth, digital tachograph, immobilizer with transponder, speed limiter, interface for alcohol tester, central locking with remote control. Air volume approx. 4.2 m³, useful volume approx. 4 m³, wall thickness 5 mm, level indicator (float) calibrated in 500-liter increments, lower suction connection DN 100 Perrot, separate suction connection for hose DN 100, vacuum pump Jurop PNR 73 HDR (approx. 432 m³/h) hydraulically driven, safety valve operating overpressure 0.5 bar, ventilation valve 0.2 bar, tank emptying via free outflow, emptying with 0.5 bar using the vacuum pump, control panel illuminated, made of stainless steel, splash-proof and lockable, mounted on the rear right of the superstructure, remote control, 2 hose trays made of aluminum in maximum length, 2 hook brackets on the full-width rear door for stowing hoses, suction hose reel with hydraulic drive designed for approx. 40 m of suction hose DN 80 (suction hoses are not included in the price; hoses will be coordinated with the customer in the event of a rental), waste container at the right end of the frame, lockable toolbox on the left at the rear, 4x LED work lights, 2x at the rear and 2x each on the right and left of the superstructure, 1x rotating beacon at the rear of the vehicle and 1x at the front left, 2x A-sign. Tjdpoz Hxa Djfx Al Ajc

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Tedpfx Aovfx A Aol Ajc Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) Tedjnlb Rwopfx Al Aec - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device Tedpfxotv Rgro Al Aoc * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW Tedpfx Alexabaij Aec weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user Todpfxexabhge Al Aec - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm Tjdpfx Aloxabkzs Asc band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm Todpfx Asz Dgpbol Aoc • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • GEKU automation with conveyor belts (included)

Condition: used, Year of construction: 2011, offer consist of: - Horizon perfect binder BQ-270C Horizon BQ-270C one-clamp perfect binder - clamps: 1 - spine gluing: Hotmelt - sight gluing: hotmelt - milling section: with extraction - milling depth: adjustable - cover feeder: suction drum feeder with 4x scoring - technology: touch & work - display: big size color display - saveable jobs: 200 memories for repeat orders - sheet size: max: 320 x 310 mm; min: 135 x 115 mm - cover size: max. 660 x 320mm; min. 240 x 135mm - book thickness: max. 50mm; min. 1mm - cover weight range: 90 - 300 g/sqm - cover pile hight: max. 70mm - speed: max. 500 cycles/h dimensions: 2.720 x 910 x 1.545mm - power: 400V/ 50Hz - 2,7kW -weight: 900kg We can also organize the following for you: Tjdpfxez Eg Sfe Al Ajc packaging, loading, transport ( by ship or plane) including customs

Condition: new, max. tool diameter 400 mm 0 180 mm operating pressure 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in various sizes and at short notice Designs are available and can be requested on special claims be modified. As a rule, water-based cleaners are used deployed. But solvents are also used in ours cleaning machines. If necessary, the systems can be ex-protected version are delivered. Technical details EMSA ROTATHERM Mini: ----- Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230V Frequency: 50Hz Dimensions ----- Depth: 530mm Width: 650mm Height: 630mm Weight: 48kg ----- Price of the basic machine in the above design: On request! ----- Accesories: ----- Todpfx Aoyrtytel Aec Order No.: 1.521 Raised lid/max. Tool length 310 mm Order No.: 1.522 HSK 63 F tool holder for changing with basket Order No.: 1.523 HSK 63 E tool holder for changing with basket Order No.: 1.524 Tool holder for Weinig Powermat to change with basket Order number: 2.006 small parts basket, Order number: 1.504 filter system (0.08m²), Order number: 1.510 pressure gauge, Order No.: 1.511 Electromotive basket drive, Order number: 1.512 mobile frame, Order number: 1,513 rolls, Order number: 1.514 suction device, Order number: 1.516 oil separator / belt skimmer, Order number: 1.518 system completely in stainless steel, Order number: 1.519 nozzles in stainless steel, ----- Price on request The ROTAHTERM tool washing machine is also available in larger versions Standard, Maxi and XL available. All devices are also available in special voltages. Surcharge on request. When ordering accessories, the specified technical data and possibly the delivery time! The values ??given are guide values. Construction changes reserved. Delivery time: short term and after Agreement. All prices ex works plus packaging, transport, insurance and legal VAT. (technical information according to the manufacturer - without guarantee!)

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below Tsdpfeyrty Hsx Al Aec - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg Tedpfx Asytx Urjl Aec mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: as good as new (ex-display), Year of construction: 2026, max. workpiece length 4400 mm profile spindle 1 Stück main drive 19,2 kW Control Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Different tool magazines for optimal tool loading - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of the workpieces - CNC controlled work table with automatic positioning of beams and Stretcher - Automatic re-clamping for changing between external and internal profiling - INTEGRATED window construction software, i.e. the machine does not have to (but can of course) can be controlled from the office with external industry software. - strong motor with 19.2 kW HSK-63 E Please note that this stock machine is with us in Oberkochen and is already equipped with many useful options. Tools available at short notice on request! Request an offer and see for yourself unbeatable value for money! VIDEO of the machine on request! Below you will find the technical Description of the machine as a PDF document. We would be happy to sell your used machine to a pay a reasonable price! Suitable stationary or mobile suction on request! (see e.g. #5674 NESTRO NE 300) Tedpoyyqm Usfx Al Aec Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (technical information according to the manufacturer - without guarantee!)

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs Tsdpsvnv Uhsfx Al Aec - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Tjdpfxsvnv Tqs Al Aoc Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: excellent (used), mileage: 38,973 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, wheelbase: 5,250 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,270 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 2021, Equipment: ABS, EBS, cruise control, trailer coupling, = Additional options and accessories = - Air suspension system - Electrically adjustable seats - Gullet - Power take-off (PTO) - Speed limiter - Steering wheel audio controls - Sun visor = Remarks = Drivetrain PTO: 1739 uur Superstructure Construction year: 2021 2021 MAN TGS 28/470 in absolute top condition with only 39,000 km. This one is configured as a sewer cleaner and has the following specification: Brand: Kroll Type: Combination gully cleaner Model:K14.0/28p Total capacity: 14,000 liters Adjustable partition with 3 positions Water tank position, Sludge tank: 1. 3300 liters, L10600, 2. 5300L 8600, 3. 7300, 6600L Large high-pressure hose reel behind 180m DN 25 HD hose Small high-pressure hose reel behind 60m DN 13 HD hose Suction hose storage cassette with 180-degree telescopic arm High-pressure water gun Sound-insulating panels left and right Remote control High-pressure water pump Brand: Uraca Model: KD718 Capacity 315 liters per minute at 170 bar Vacuum pump Brand: CVS Model: Vacustart 1600 Capacity: 1600 m³ per hour Dutch machine in top condition! = More information = General information Number of doors: 2 Registration number: 60-BRN-8 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 17.659 kg Carrying capacity: 10.441 kg GVW: 28.000 kg Functional Make of bodywork: Kroll K14.0/28P Water tank: Yes Maintenance APK (MOT): tested until 06/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Number of hand transmitters: 1 Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Tsdpozuc Rrsfx Al Ajc Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. Tjdpjfyadbefx Al Asc The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Technical details: revolution per minute: Motor: 1475 U/min voltage: 400 V / Hz total power requirement: 4,6 kW AXIAL fan inside Ø 600mm Flow rate 3,30 m³/s Pressure 600 Pa Siemens motor protection IP54 External control * Todpfx Aeu Nvz Isl Ajc

Year of construction: 1998, condition: used, Technical details: air flow rate: 1200 m³/h Tedowfr Dlepfx Al Aec suction stud diamter: 360 x 350 mm drive power: 0,11 kW connected load: 380V V weight: - kg total power requirement: 0,59 kW dimensions L x W x H: 600 x 550 x 560 mm

Condition: used, Technical details: air flow rate: - m³/h suction stud diamter: 160x45 mm weight of the machine approx.: 68 kg dimensions L x W x H: 650x600x2300 mm dust suction device without fan (without suction mechanic) installed on a steel fram with 4 base stands, Filter: filter drum Dia.=360x520mm, rotatable manual, space of filter size W:580xWB:560xH:750mm -intake (suction) conection diameter 160x45mm (sideways) - dirt ejection diameter = 280x110mm , bottom opening - exhaust opening diameter=160mm ( ceiling) via flange bolted diameter=250mm and angular adapter dia. = 145mm Todou Nwv Hspfx Al Ajc *

Condition: used, Year of construction: 1999, Horizon VAC-100m Air-Suction Collator Tower The VAC-100m is the ideal solution for print shops looking to expand their production capacity without investing in completely new systems. Its easy integration with the VAC-100a tower and high reliability make it a valuable addition to your production line. Key Features: Cost-efficiency: The VAC-100m is a cost-effective expansion solution as it operates without its own display and control unit. This reduces acquisition costs and allows you to expand existing systems efficiently. Expandable Capacity: With the ability to connect up to 5 VAC-100m towers to one VAC-100a tower, you can flexibly expand your collating capacity to up to 60 stations. This enables efficient handling of large jobs and a significant increase in your production capacity. Reliability: With error prevention features such as misfeed, double-feed, and jam control, the VAC-100m ensures that your production runs smoothly and without interruptions. Specifications: Tedpfx Aez Ha E Uol Ajc - Technology: Touch & Work (via VAC-100a) - Number of stations: 10 per tower - Expandability: Up to 6 towers (60 stations) - Error prevention: Misfeed, double-feed, and jam control - Job memory: 9 storage slots for repeat orders - Programs: Double cycle (non-stop operation), sheet insertion (single and double), booklet making program, block program, selective collating - Sheet size: Max. 500x350 mm; Min. 148x120 mm - Paper weight: 40-250 g/m² - Loading capacity: 55 mm per station - Performance: Up to 9,500 sets/h - Power: 230V; 50/60Hz - 1.86 kW - Dimensions: 842x652x1,961 mm - Weight: 310 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), operating hours: 7,831 h, functionality: fully functional, machine/vehicle number: SW, mileage: 53,200 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, number of seats: 1, number of previous owners: 1, Equipment: additional headlights, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in excellent condition Formerly a municipal/government vehicle Registered as a self-propelled working machine (40 km/h) Upon request, we will perform a major engine inspection, including replacing the timing belt, water pump, oil, and filters, free of charge upon sale. 7831 total operating hours 53,200 kilometers 4x4 all-wheel drive Right-hand portal arm with weed control function (requires a special disc brush) Like-new mixed bristle disc brush New water spray nozzles External controls for the sweeping material container Rear-view camera and suction hose camera Sweeping width up to 2270 mm Sweeping material container made of stainless steel Wheelbase 1600 mm Track width 1055 mm Fresh water tank 180 liters Unladen weight approx. 1900 kg Permissible total weight 3500 kg Length: 4510 mm / Width: 1210 mm / Height: 1970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Tedpszk T R Uofx Al Asc Engine: water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min, 225 bar - Circuit 2 (rear) 0–20/25/30 l/min, 195 bar Hydraulic service brake via foot pedal Cab with air-sprung comfort driver's seat Air conditioning / heating Water treatment system Fire hydrant connection Dosing system Other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows, and lawnmowers (not included) Errors, changes, and prior sale reserved We only sell according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved We are available from Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment. Outside of these hours, telephone appointments are possible. We would be happy to accept your current used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is not binding. Errors/changes and prior sale are subject to change!

Condition: used, operating hours: 7,529 h, mileage: 49,881 km, power: 55 kW (74.78 HP), first registration: 11/2015, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, next inspection (TÜV): 04/2026, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, immobilizer system, parking sensors, power assisted steering, * German vehicle * Original 49,881 km * 7,529 operating hours * Documentation available * Schmidt Swingo, multiple units available * Condition as shown in photos * All-wheel steering * High-pressure cleaner with high-pressure lance for pre-cleaning and removal of stubborn dirt * 2 front disc brushes * 800 mm diameter * Sweeping width: 2,800 mm * Ideal for footpaths, bicycle paths, and narrow alleys * Air conditioning * Pre-spraying system * Debris hopper 1.8 m3 * Fresh water tank 190 litres * Total capacity 380 litres * EasyDrive (hydrostatic drive system) (SN) * Hydropneumatic suspension with 4 nitrogen spheres * Remote-controlled container lid opening and tilting * Diesel engine VM39D/2 * 55 kW * 50 km/h type approval * Driver's cab with air-suspended comfort seat * Camera for suction nozzle monitoring * Reversing camera * 2-seater * Rotating beacon(s) * Wheelbase 1,800 mm * GVW 3,500 kg Tsdpfox Uy Abox Al Aec * Payload 650 kg * Self-propelled working machine * For sales to businesses and for export (non-EU and within EU), German commercial law applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer generally does NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the opportunity to inspect and check the goods to avoid any misunderstandings regarding their condition and suitability. Inspections and checks are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to changes, prior sale, and errors.