Used Twin Roll Forming Stud & Track Machine for sale (72,783)

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers Bwsdpfx Ansy Twfqj Non - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, side roll diameter: 190 mm, working width: 1,550 mm, sheet thickness steel (max.): 9 mm, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, swiveling upper roller, – Capacity 1550 x 9 mm Bodoy Rh H Tepfx An Njwn – Electrically adjustable rear roller – Electrically adjustable lower roller (material clamping) – Digital display for rear roller movement – Digital display for lower roller movement (material clamping) – Hardened rollers – Conical rolling – Swing-out upper roller – Braking motor – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 1971, machine/vehicle number: 15162, Roller diameter 150 mm, coolant device and machine lamp Bwodpey Sqigsfx An Non

Condition: used, Year of construction: 1954, machine/vehicle number: 6315, Roll diameter 200 mm, coolant device and machine lamp Bedpfsy Sqi Tox An Nswn

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Bjdpoyx Na Refx An Newn

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) Bwedpfey Ez A Rox An Njn - Operating instructions (PDF)

Condition: good (used), Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Sturdy structure Bodey Ud Dpspfx An Newn Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Brush diameter mm 300 Motor Hp 10 Automatic table lifting Overall dimensions mm 3100 x 1750 x 1650 h Weight kg 1200

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt width: 350 mm, warranty duration: 24 months, total width: 1,310 mm, total length: 630 mm, total height: 500 mm, input voltage: 230 V, table length: 600 mm, empty load weight: 79 kg, opening width: 25 mm, working width: 350 mm, space requirement height: 580 mm, space requirement length: 630 mm, space requirement width: 590 mm, power: 0.37 kW (0.50 HP), SINMAG Rollo Mini tabletop sheeter, even for the smallest bakery Advantages: + Excellent price-performance ratio with a 2-year warranty + Ultra-compact tabletop sheeter with motorized belt drive + Extremely easy to operate with a joystick for adjusting the sheeting direction + Suitable for all types of dough for sheeting and layering + PVC conveyor belts, easy and quick to clean + Therefore also suitable for marzipan and rolled fondant + Tables can be folded up on the left and right + No high-voltage power required + Integrated motor and flour container + Scrapers can be easily removed without tools + Standard equipment includes 1 hand crank and 2 dough collection trays + Can be placed on almost any table (requires a depth of only 50 cm) + Fast supply of spare parts within 1-2 working days Bwodpfjw T Rp Usx An Non SPECIAL accessories, available at an extra charge: --- Stainless steel frame for Sinmag Rollo (extra charge: €1,590.00 net) + The perfect, space-saving tabletop solution for the Rollo + Table can be folded up with just a few steps + Frame with a sturdy stainless steel frame, on 4 swivel castors Technical data: - Belt width: 350 mm - Table length: 600 mm each = 1200 mm - Roller adjustment: from 1 mm to 25 mm (depending on the product) - Suitable for a maximum of 1.8 kg of dough - Motor power: 0.37 kW - Connection values: 230V - 1Ph - 50Hz - Dimensions: --- Working position: 1310 x 630 x 500 mm (W x D x H) --- Rest position: 590 x 630 x 580 mm (W x D x H) - Net weight: 79 kg

Condition: used, Profiling machine Dreistern with accessories Machine bed features: Production direction: right to left 18 stations, driveable 1 x 9.2 kW DC motor Profiling frames, Type 1: Tool width frame: 135 mm Working spindle diameter: 30 mm Working spindle connection: 20 mm with keyway Fixed lower spindle Axial adjustment Adjustment range lower spindle - upper spindle: 60 - 100 mm Axial distance: 130 mm Profiling frames, Type 2: Tool width frame: 210 mm Working spindle diameter: 30 mm Working spindle connection: 20 mm with keyway Fixed lower spindle Bwsdpoy Sm Sdofx An Nsn Axial adjustment Adjustment range lower spindle - upper spindle: 80 - 130 mm Axial distance: 260 mm Scope of supply: Machine bed Strip welding device Infeed table Straightening device DC motor Control system with operating panel Electrical documentation 2 straightening roller holders 3 gearboxes 9 profiling frames, Type 1 8 profiling frames, Type 2 18 universal joints The machine operated flawlessly in the customer's factory until it was dismantled. Strip unwinder and perforating machines are also available from us as used machines. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system retrofit Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Bedpsy Sm A Ajfx An Newn Roll Forming Stands Features: Tool width per stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: left to right Center distance: 330 mm 18 stations 16 powered stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 2x 18.5 kW Bosch motors Profiling Frames Features: Tool width frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower to upper shaft: 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower to upper shaft ratio 1:1 Scope of Delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Special straightening unit 16 gearboxes 16 profiling frames 2 Bosch motors 32 cardan shafts Bwsdpfxjy Sm Apj An Nen The machine was working flawlessly in production until dismantling at the customer's site. Control system not included. Coil decoilers and punching units are also available used. The line can easily be extended with additional stations. We can support you with reassembly of the line: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: good (used), 3-Roll Plate Rolling Machine Type R55 Working length 1020 mm Bwjdpey Rx Dcefx An Nsn Maximum sheet thickness 1.25 mm Good, fully functional condition.

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Bjdpfx Ajywpblon Nown

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Bedpfswkaaljx An Nswn Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, neu Bwodpfx Ansynndro Nen ca. 10 Wochen ab Auftrags Türkei 2900 € 1270 mm 1.2 mm 68 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll Bodpfx Aewirv Nen Newn tiltable upper roll conical rolling device user manual in GERMAN

Condition: excellent (used), Otto Kremmling type oka Automata 600/7 Marzipan depositing and forming of soft mass. 25 kg blocks of Marzipan are put in squeezed through the roller and into the dies forms then goes into cooling system. Bwsdpfx Anjylbz So Non

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, total height: 1,650 mm, total width: 1,400 mm, total length: 2,000 mm, Equipment: documentation/manual, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition. Bwjdpfxey Rtk Dj An Njn

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing Bodpfx Anowld Upj Njwn - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) Bedoxaawgjpfx An Njwn - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: used, Rolling Machine Brand: JAMMES PROMECAM Type: HC 1310 Maximum thickness: 10 mm Maximum length: 3040 mm Rolling capacity: 1500 mm Upper roller diameter: 300 mm Side roller diameter: 220 mm Working speed: 0 to 7 m/mm Hydraulic control 1 hp motor Hydraulic unit motor: 5.5 kW Weight: 7000 kg Dimensions: 5100 x 1000 x 1000 mm Bwedpfx Answf Ndie Nen Type: 4-roller rolling machine

Condition: good (used), - Type: AKLE-L 700 - Year of manufacture: 2011 - Serial number: 0127930010 - 2 x available both are new unused Bwodpforu Dd Rox An Nen

Condition: not inspected (used), Year of construction: 1964, functionality: unexamined, machine/vehicle number: 138, overall weight: 400 kg, total height: 1,700 mm, total length: 2,000 mm, total width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Dimensions & weight Dimensions (L x W x H): 2,000 x 1,500 x 1,700 mm Bwsdpfsy D Tcmsx An Nsn Weight: 400 kg EQUIPMENT For knurling pins Vibratory feeder External reference: 31

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total height: 1,700 mm, total length: 2,000 mm, total width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obliges the winner to collect the machine within the specified timeframe: between 23/06/2026 and 26/06/2026! Auction of a thread rolling machine including vibratory feeder! MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Dimensions & Weight Bwedpfx Anoy D Sy Dj Non Dimensions (L x W x H): 2,000 x 1,500 x 1,700 mm Weight: 500 kg EQUIPMENT For knurling of pins Vibratory feeder External reference: 38

Condition: not inspected (used), Year of construction: 1964, functionality: unexamined, overall weight: 400 kg, total height: 1,700 mm, total length: 2,000 mm, total width: 1,500 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! Auction of a thread rolling machine including vibratory feeder! MACHINE DETAILS Bedpfx Aey D Suuen Nswn Operating voltage: 380 V Control voltage: 220 V Dimensions & weight Dimensions (L x W x H): 2,000 x 1,500 x 1,700 mm Weight: 400 kg EQUIPMENT For knurling of pins Vibratory feeder External reference: 39