Used Wohlenberg Section Gatherer for sale (2,586)

Condition: new, Immediately available Fassi cranes in the respective versions: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) Blsdpfsz Hkckex Al Aon - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) incl. additional support struts Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for e.g. grapples or clamps (5th & 6th control circuit), with the exception of the F545 - Hydraulic outriggers, operable via remote control - LED work lights - Scanreco remote control with cross-lever, charger and carrying straps - Electronic overload protection system - Emergency shut-off and optical alarm (90% and 100%) including adjustable digital swing limiter - FASSI stability control FSC including LMB II - From F235 model size: double-knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th sections available at an extra cost (can be ordered individually for each crane) - For Fassi F545 series = incl. preparation for a winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm Bsdpfsd Iinysx Al Aeln capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom!! Roller conveyors optional!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry

Condition: used, Coil Handler and Straightening Machine EBU Strip Processing Line Straightening Machine EBU, Type RE 7.50-320 Year of Manufacture 2004 Strip Nominal Width 320 mm Strip Width max. 320 mm Strip Thickness max. 3 mm Strip Cross-Section max. 1000 mm2 Blodpfjz Ek Scex Al Aon Power Supply 400 Volts, 50 Hz Unwinding Coil Handler EBU, Type BSH 3/320 Manufacturer 10838, Year of Manufacture 2004 Coil Weight max. 2500 kg Coil Width 320 mm Power Supply 400 Volts, 50 Hz - Central expansion - Drive via geared brake motor - 3 starting arms

Condition: used, mileage: 452,362 km, power: 390 kW (530.25 HP), first registration: 02/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,000 mm, total width: 2,500 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, DAF XF 530 FAN / 6X2 / STEERING+LIFT AXLE / BDF C7.45 / CABIN CLIMATE CONTROL VEHICLE HISTORY IF INTERESTED, 3-AXLE TRAILERS ARE ALSO AVAILABLE. ? INTERNAL NUMBER: 36 ECC ? 1ST OWNER ? GERMAN VEHICLE ? WORKSHOP MAINTAINED ? DAF MAINTENANCE CONTRACT ? REGULARLY MAINTAINED AT DAF ? LAST INSPECTION AT DAF: 02/2026 ? BRAKES REPLACED 02/2026 ? MOT VALID UNTIL 03/2027 ? INSPECTION VALID UNTIL 09/2027 ? VIDEO AVAILABLE UPON REQUEST ? VEHICLE AVAILABLE IMMEDIATELY VEHICLE EQUIPMENT ? 6X2 ? 3RD AXLE: STEERING AXLE ? 3RD AXLE: LIFT AXLE ? LONG-DISTANCE CAB ? SLEEPER CAB ? BERTH ? AIR CONDITIONING ? CABIN CLIMATE CONTROL ? CABIN HEATER ? RETARDER ? ALCOA ALUMINUM RIMS ? ADDITIONAL HEADLIGHTS / ROOF HEADLIGHTS ? ROOF WARNING BEACONS ? ABS ? EBS ? ESP ? AIR SUSPENSION BODY ? GÖBEL BDF/CONTAINER INTERCHANGEABLE CHASSIS ? REINFORCED BDF FRAME ? AUTOMATIC BDF INTERCHANGEABLE BRIDGE LOCK ? SELF-LOCKING BDF MOUNTINGS ? BDF C7.45 MOUNTING POSSIBLE ? C7.45 WITH REMOVED SPOILER PACKAGE ? MANUFACTURER: B. GÖBEL + SOHN GMBH ? BODY NO.: 600 HG 361 ? PREVIOUS OWNER'S INFORMATION: INTERCHANGEABLE FRAME RATED UP TO 25,000 KG VEHICLE DATA ? MANUFACTURER: DAF ? MODEL: XF 530 FAN ? FIRST REGISTRATION: 20.02.2018 ? YEAR OF MANUFACTURE: 2017 ? MILEAGE: 452,362 KM ? POWER: 390 KW / 530 HP ? ENGINE CAPACITY: 12,902 CM³ ? CYLINDERS: 6 ? FUEL: DIESEL ? EMISSION CLASS: EURO 6 ? AXLE CONFIGURATION: 6X2 ? AXLES: 3 ? 3RD AXLE: STEERING AND LIFT AXLE ? PERMISSIBLE TOTAL WEIGHT: 26,000 KG ? UNLADEN WEIGHT: 10,660 KG ? PAYLOAD: 15,340 KG ? COLOR: WHITE VEHICLE DIMENSIONS ? LENGTH: 10,000 MM ? WIDTH: 2,500 MM ? HEIGHT: 3,900 MM TIRES / RIMS ? FRONT AXLE: 385/65 R22.5 ? REAR AXLES: 315/80 R22.5 ? ALCOA ALUMINUM RIMS EXPORT / REGISTRATION ? EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR ? EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2,000 EUR EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) ? 5 DAYS REGISTRATION ? 15 DAYS REGISTRATION ? 30 DAYS REGISTRATION ? 15 DAYS AUSTRIA REGISTRATION ? EURO 1 ? TECHNICAL DATA SHEET Bjdpfx Aez H Eirel Aoln VEHICLE RESERVATIONS ONLY VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. FOR SALES TO THE EU & THIRD COUNTRIES, A DEPOSIT/GUARANTEE OF AT LEAST 500.00 EUR / 1,000.00 EUR WILL BE CHARGED. CHANGES, ERRORS AND PRIOR SALES RESERVED! YOU CAN FIND MORE VEHICLES ON OUR HOMEPAGE: SALES ARE EXCLUSIVELY BASED ON OUR TERMS AND CONDITIONS - SEE HOMEPAGE. IMAGE NOTE: INDIVIDUAL VEHICLE IMAGES MAY HAVE BEEN DIGITALLY PROCESSED. IN THIS CASE, DESCRIPTIONS, LOGOS OR REGISTRATION PLATES MAY HAVE BEEN REMOVED OR MADE UNRECOGNIZABLE. IMPORTANT NOTE: DESPITE CAREFUL CHECKING OF ALL DETAILS IN OUR OFFER, IT MAY HAPPEN THAT ERRORS OCCUR. IN SOME CASES, THESE ARE CAUSED BY TRANSMISSION ERRORS IN THE SYSTEMS OF THE VARIOUS PLATFORM PROVIDERS. THEREFORE, WE WOULD LIKE TO POINT OUT THAT ALL INFORMATION IS WITHOUT GUARANTEE AND DOES NOT CONSTITUTE A LEGAL CLAIM. LEGAL INFORMATION: THIS SALES ADVERTISEMENT DOES NOT CONSTITUTE AN OFFER IN THE SENSE OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT IS MOREOVER

Condition: excellent (used), mileage: 494,595 km, power: 375 kW (509.86 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 5,100 mm, loading space width: 2,480 mm, Year of construction: 2019, operating hours: 5,203 h, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, power mirror, traction control, trailer coupling, - 4. Valve - 5. Valve - Aluminum fuel tank - Rear work light - Front work light - Heated mirrors - Brake booster - DAB radio - Differential lock - High beam headlights - Windshield - Low noise - Enclosed cabin - Speed limiter - Cabin - Air suspension - Air-suspended seats - Air horn - Media system - Rotating beacon - Reversing camera - Sun visor - Auxiliary heater - Toolbox - Power take-off (PTO) - Fifth wheel coupling Axle configuration Front axle 1: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 22,458 kg Payload: 9,542 kg GVW: 32,000 kg Functional Mast: Telescopic (8 sections) Mast length: 21 m Lifting capacity: 10,000 kg Number of valves: 4 Body manufacturer: HIAB X-HIPRO 408 E-8+LIER+ROTARTER CE marking: yes Condition Technical condition: very good Optical condition: very good VOLVO FH 500 8X4 TRIDEM + HIAB X-HIPRO 408 E-8 + ROTZLER CABLE WINCH SEMI-TRACTOR / FLATBED TRUCK – DETACHABLE FLATBED – 8X4 TRIDEM – 33,000 KG A very complete and versatile equipped Volvo FH 500 8x4 Tridem, suitable for use as a semi-tractor and flatbed truck, equipped with a detachable flatbed and a powerful HIAB X-HiPro 408 E-8 loading crane with a Rotzler Titan TC 2 cable winch. Thanks to the adjustable fifth wheel coupling, trailer coupling, and the available hydraulic, air, and electrical connections, this Volvo can also be used excellently with a semi-trailer or trailer. The 8x4 Tridem configuration, air suspension, and the liftable and steerable last axle ensure high maneuverability and versatile applications. GENERAL DATA Make: Volvo Model: FH 500 Configuration: 8x4 Tridem Type: Semi-tractor / Flatbed truck First registration: 28.03.2019 Mileage: 494,595 km PTO hours: 5,203 hours Technical weight variant: 33,000 kg Unladen weight: 22,458 kg Transmission: Automatic Suspension: Air-suspended Cabin: FH sleeper cabin CHASSIS & DRIVE - 8x4 Tridem configuration - Last axle liftable and steerable - Air-suspended - Technical weight variant 33,000 kg - Unladen weight 22,458 kg - Volvo Dynamic Steering Blsdpfx Aljz Hwlfj Aon - Automatic transmission - Auxiliary drive / PTO - PTO hours: 5,203 - Adjustable fifth wheel coupling - Trailer coupling - Hydraulic connections for semi-trailer - Compressed air connections for semi-trailer - Electrical connections for semi-trailer - Toolboxes on the chassis - Side deflectors on the chassis The combination of fifth wheel coupling, trailer coupling, and the available connections allows the vehicle to be used very flexibly for different transport tasks. DETACHABLE FLATBED The Volvo is equipped with a practical detachable flatbed. By removing the flatbed, the vehicle can be quickly converted from a crane-flatbed truck to a crane-semi-tractor. Length of the flatbed: approx. 510 cm Width of the...

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp is approximately 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 tie-down points, each with a capacity of 2.5 tons, 8 tie-down points, each with a capacity of 6 tons, steel sideboards, foldable and removable, wooden planks, 50 mm thick, loading area sloped at the rear, interior loading area width 2,480 mm, rear underride guard removable, front section for drive-through loading, vehicle with temporary registration, also available with a loading area length of 5,300 mm!!, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Bodpfx Aloz Hvcco Aeln

Condition: used, Year of construction: 1998, The Mueller Martini Prima Amrys from 1998 is a fully equipped and highly efficient saddlestitcher, featuring 7 feeders, a cover feeder, inserting machine, labelling section, and a card gluer. It includes the Automatic Make Ready System (AMRYS), a three-knife trimmer, a Mueller Martini 227 inserting machine with 4 stations, and other optional components as Inkjet unit, and Mosca RO-TR-500. It reaches a maximum mechanical speed of 13,000 cycles per hour and handling sizes from 90 x 105 mm to 320 x 480 mm. Format: 320 x 480 mm Equipment: Equipment Feeder Blodpfx Aljwcqygj Asn Number of feeder: 7x 370 Cover feeder: 1x 1529 Card gluer: Yes Stitching unit Type: Prima Amrys 2x stitching heads AMRYS - Automatic Make Ready System Three knife trimmer Type: Mueller Martini 360 Delivery Type: Mueller Martini 310 CS-20 Serial number: 97.00900.05 Delivery direction: to the right Optional (available on request) Stacker InkJet System Wrapping unit Mailing & Sealing Machines Inserting Machine Type: Mueller Martini 227 Number of stations: 4x Technical Details Size min: 90 x 105 mm Size max: 320 x 480 mm Mechanical speed max: 13,000 cycles/h

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Blodpfsulnb Djx Al Aen Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW Blsdpfx Alox Sr Dre Ajn 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: - Material is always clamped at right angles Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) Bledpfxsxabzye Al Asn - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 Bedpfezzz R Djx Al Aeln - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection Bljdszd Uv Espfx Al Ajn CE safety equipment

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Blsdow S Dmdepfx Al Ajn Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Bledjw Ip Dgspfx Al Aon Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Bodpez A Sxljfx Al Aoln Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: used, Year of construction: 2011, Edge banding machine Manufacturer: Homag Type: KAL Ambition 210 Year of manufacture: 2011 Blodpfx Aez Atm Tol Ajn Technical data Edge trimming Gluing section Pressure zone SK11 milling unit Profile trimming blade Surface trimming blade Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1986, screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo Bsdpozht H Rofx Al Aoln • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: DAM413, Equipment: CE marking, Cryogenic tunnel freezer 4m Effective freezing length Bodpfsz D H D Sex Al Aeln 0.3m Effective machine width Total machine length 5m Total machine width *Cooling medium: Liquid nitrogen 2.5-3 Bar *Robust and high-quality design. Construction with 120mm wall thickness. Manufactured from AISI 304 and 316 stainless steel. With fully welded tunnel sections. U-shaped bottom for optimum cleaning. Opening and closing of the freezing tunnel is achieved by pneumatic bellows, providing full access for cleaning and maintenance purposes. *Insulation: Hard foam with an average density of ± 40 - 50 kg/m³. Cryo seal. *5 axially mounted motor units, IP55 rating, fitted with stainless steel extension and propellers. *Product & loading: Product infeed height 120mm. *Proportional controlled LN² injection. *Electrical stainless steel cabinet, IP67 rating. Control panel, IP55 rating. *Power supply: 3x400+N Pe 50Hz 16A. *CE declaration, food certified, user manual, after-sales service. *1 year warranty.

Condition: used, Rotary Trimming Line Gammerler RS 114/530 consisting of 2 rotary trimmers RS 114/530 and 1 bump-turn Gammerler EM 120 with infeed jogger segmented knives Technical Data: Width untrimmed: min. 120 x 120 mm - max. 530 x 530 mm Width trimmed: 2-pages min. 117 x 117 mm max. 527 x 527 mm 1-page min. 110 mm Section width: min 0,5 mm – max 45 mm Cut Depth: 8 mm Max. flow rate: 80 m/min. Bcrjx0gm7f Cutting system: stream or single cut Product: sheet fed and offset printing Weight: approx. 670 kg /each Further Gammerler components on request. Bodoui U Ixepfx Al Ajln Machine type: Rotary Trimming Line

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply: max. approx. 250 L/min. at approx. 3.5 bar water pressure Transfer to the filter system is provided by the customer, air and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from the clean tank to the dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: 3-6% emulsion Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Maximum operating volume: approx. 4.58 m3 Minimum operating volume: approx. 3.60 m3 Process flow: fully automatic full-flow filtration Sludge discharge: fully automatic, with consistent consistency The dirty fluid is fed via customer-provided pumping stations. The swarf and fine sludge generated during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Maximum volume: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive Blodpfx Alezwccmo Ajn 3 connection nozzles for return lines from three machines 1 clean fluid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frames), without ladder, without railing, without internal access rungs Maximum volume: approx. 0.55 m3 28926

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. Bedpfx Ajzvqcljl Ajln No serial production. Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Cable cross-section: 5×6 mm² If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of any bankruptcy claims: Universal profiling steel shear with hole punch, Mubea Bodpfez Hu E Asx Al Aoln Type KBL 11 N Year of manufacture 1978 Pressing force 35 tons Reach 320 mm Punching round holes up to 33 mm in diameter Cutting square sections up to 30 x 30 mm Cutting flat steel 100 x 10 mm Cutting angle iron 130 x 13 mm Cutting T-profiles 60 x 8 mm Various hole punches Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: used, Year of construction: 2020, Two-section lockers, c +P, in excellent condition, with or without benches, sold individually or as a set. Bsdpfx Alozk Dzws Ajln Double lockers: 67 units Single lockers: 6 units Benches: 36 units

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer; still connected to the mains and extraction system The machines are in excellent condition and can still be demonstrated Blodpfx Asy T R Tbsl Aon ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phas...

Condition: new, CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideal for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With an overall height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly arranged and easily accessible storage spaces on both sides. Thanks to 6 storage levels including the base, it offers ample storage capacity while saving valuable floor space. Each cantilever arm is loadable up to 200 kg. The robust construction ensures reliable performance in daily operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Total height: approx. 2,000 mm - Usable depth per arm: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm Bsdpfx Aoz H N H Uel Aoln - Center distance (upright spacing): approx. 1,250 mm - Maximum load per arm: 200 kg (with evenly distributed load) - Maximum load per upright: 1,000 kg (with evenly distributed load) - Storage levels per side: base + 5 - Design: double-sided, arms & anti-roll-off devices welded in place - Colour: RAL 7016 (anthracite grey) - Connectors & bracings: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base section made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, RR 50x30x2 mm - Incl. all braces and required bolts - Incl. heavy-duty anchors Price: 1229.00 € net incl. delivery 1462.51 € gross incl. delivery You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast processing and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. We are available by phone from Monday to Friday, 08:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.