Used Zeiss Axioskop for sale (148)

Condition: like new (used), Year of construction: 2023, operating hours: 211 h, functionality: fully functional, machine/vehicle number: 7880, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,350 mm, total width: 2,700 mm, total length: 1,800 mm, table width: 400 mm, type of input current: three-phase, table length: 820 mm, warranty duration: 1 months, feed length X-axis: 455 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 Demonstration Machine Only 482/211 operating hours Technical Data: Travel paths: 450x300x300 mm Workpiece clamping table: 820x400 mm Tank size: 900x520 mm Fill height: 300 mm Distance table/electrode holder: 150/450 mm Max. workpiece weight: 800 kg Dielectric max.: 600 l Dimensions (W x D x H): 2700x1800x2350 mm Machine weight: 2500 kg Power supply: 3/N/PE 400/230 V, 50 Hz Power consumption: 6.7 kVA Equipment: Color: Light grey MF30 user interface Touch screen display Exogen+ 60A generator Generator output upgradable to 120A Number of electrode changer positions: 201 Direct measuring systems on all axes (X, Y, Z, C) Nwedpfx Afsxbda Uowjk 2 cartridge filters Integrated cooling unit CO₂ extinguishing system C-axis 100 rpm, holding brake Handheld controller with enabling switch Automatic lowering tank with level control Erowa ITS chuck 12 months warranty Transport On-site commissioning Training

Condition: excellent (used), Year of construction: 2013, operating hours: 404 h, functionality: fully functional, machine/vehicle number: 500897, load capacity: 6 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KR C4 Compact, teach pendant manufacturer: KUKA, teach pendant model: SmartPad, KUKA KR 6 R900 sixx FLR with KR C4 Compact controller and SmartPad The robot will be delivered with new memory backup batteries. The replacement has already been scheduled and will be carried out before the device is handed over to the new owner. Complete robotic workstation based on the KUKA KR 6 R900 sixx FLR industrial robot, along with the KR C4 Compact controller and SmartPad operator panel. The robot comes from a research and development environment and was used for laboratory and testing work. As a result, it has very low operating hours, approximately 404 hours, which is a small number compared to robots operating continuously on production lines. Specifications: Manufacturer: KUKA Model: KR 6 R900 sixx FLR Payload: 6 kg Reach: 901 mm Number of axes: 6 Year of manufacture: 2013 Controller: KUKA KR C4 Compact Operator panel: KUKA SmartPad Operating hours: approx. 404 h Application The robot is ideal for applications such as: automation of production processes, assembly stations, CNC machine operation, vision systems and machine vision, quality control, research and development laboratories, education and training in the field of robotics. Nodpfx Afsziczmewjwk Technical condition The device comes from a research and development laboratory. The visual condition is very good. The robot starts up and communicates with the controller. Before shipment, the device undergoes additional technical verification. Included: - KUKA KR 6 R900 sixx FLR robot, - KUKA KR C4 Compact controller, - SmartPad operator panel, - complete set of cables, - mounting base. Additional equipment It is possible to equip the workstation with: - pneumatic and electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation components. More information on tobesold.eu Product covered by a start-up warranty.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Nodpfx Afexlchfswowk Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: refurbished (used), Year of construction: 2016, operating hours: 2,100 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 500 kg, total height: 2,670 mm, total width: 2,040 mm, total length: 1,600 mm, table width: 350 mm, quill stroke: 430 mm, type of input current: three-phase, distance table to quill: 430 mm, table length: 550 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 1,600 kg, year of last overhaul: 2025, table load: 1,500 kg, input frequency: 50 Hz, working range: 770 mm, space requirement width: 2,040 mm, space requirement height: 2,670 mm, space requirement length: 1,600 mm, Equipment: documentation/manual, EDM 310MF30 Year of manufacture: 2016, Complete overhaul: 2025 Technical specifications: Travel paths X x Y x Z: 360 x 270 x 270 mm Worktable: 550 x 350 mm Work tank: 770 x 520 mm Distance table/quill min./max.: 160/430 mm Electrode weight: 25 kg Workpiece weight: 500 kg Filling height work tank: 300 mm Power supply: 400V 3-phase 50/60 Hz Power consumption: 7 KVA Machine dimensions (W x D x H): 2040 x 1600 x 2670 mm Equipment: MF30 operating interface Touchscreen display Exopuls+ 60A EDM generator Handheld control unit with enabling button Integrated chiller C-axis 30 rpm, holding brake Flushing/suction table and head New cartridge filter system Work pump Steel table with T-slots CO² fire extinguishing system, TÜV certified Njdpfx Aowz H U Rofwswk 4-position tool changer Automatic quick-change chuck Erowa/Hirschmann/3R Automatic central lubrication Automatic tank adjustment Geometry and length compensation Performance certification 6 months warranty Transport, commissioning on site, training

Condition: used, 2 Carl Zeiss microscopes with accessories Nwjdpfxjurlpro Afwsk

Condition: excellent (used), Technical Data Manufacturer: ZEISS Type: Carmet 16/25 Serial Number: 105324 Weight: 12,300 kg Measuring Plate X = 7000 mm Nwsdpfx Afoiqb Ipowsk Y = 3000 mm Z = 270 mm Measuring Range (per side) Y = 1600 mm Z = 2500 mm Length Measurement Uncertainty MPE-E = (35 + L/50) µm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 133/SCS, cutting speed: 35,000 mm/min, working width: 1,250 mm, feed rate X-axis: 35 m/min, product width (max.): 1,250 mm, number of straightening rollers: 7, We are offering a very well-maintained Krasser CENTURIO 1250 stand-alone slitting line, manufactured in 2023, for sale. Highlights Reinforced 7-roll leveling unit Max. coil width 1,250 mm Cutting speed up to 35 m/min Suitable for longitudinal and transverse cutting as well as leveling of strip steel Modern control system with touch operation Very well-maintained condition Ready for immediate use Nwsdpszvgbqofx Afwok Technical data Manufacturer: Krasser Model: CENTURIO 1250 Type: Stand-alone slitting line Year of manufacture: 2023 Condition: Very good Max. coil width: 1,250 mm Min. coil width: 250 mm Description The Krasser CENTURIO 1250 is a powerful sheet metal cutting system for the precise processing of steel, stainless steel, aluminum, copper, and zinc sheets. The reinforced 7-roll leveling unit is particularly noteworthy, as it enables excellent leveling quality and reliable processing of a wide variety of materials. The system is currently still in operation and can therefore be inspected at any time by appointment while running. This offers interested parties the opportunity to directly verify the condition, performance, and functionality of the machine. The machine is expected to be available in the first quarter of 2027. The exact date may vary slightly depending on the project, but we currently anticipate a release around February 2027. Early reservation or coordination of the delivery date is possible and desirable. Contact For further information, technical details, or to arrange a viewing appointment, we look forward to receiving your message or call. Category ID: 1052 Type ID: 136 Type: Slitting line

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 149720, Technical specifications Manufacturer: ZEISS Type: Pro T-Premium Year of manufacture: 2008 Single-column CMM Serial number: 149720 Measuring range X = 3000 mm Y = 1800 mm Z = 2100 mm Equipment Tactile probes C99 control system CMMOS software, Caligo Holos 3.0, DMIS The machine can be upgraded with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Changes and errors in the technical data, specifications, and prices, as well as prior sale, are reserved!) Nwjdpfx Aef S A Aijfwjk

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Nwedexlctbepfx Afwjk Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Warranty: 12 months Transport Initial commissioning on site Training

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, Nwsdpfxszkbpfj Afwsk - complete set of robot cables. The robot has the following licenses: Advanced Robot Motion, Absolute Accuracy, PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Condition: used We provide a start-up guarantee.

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Granite measuring table, granite measuring plate, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Nwodpjfy U Ewjfx Afwjk Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 105220 / 105221, Technical Specifications Manufacturer: ZEISS & Stiefelmayer Type: SMM C Year of Manufacture: 1999 Measuring Table Length = 6000 mm Nwedpsfrbg Iefx Afwjk Width = 2500 mm Weight = approx. 10 t Equipment 2 SMM stands incl. RDS heads Control cabinets 2 ZEISS Dynalog P3 operator panels Access platform on the left and right The machine can be modernized with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 105220 & 105221, Technical specifications Manufacturer: ZEISS Nwsdpfsgi D Nljx Afwek Type: SMM-C Year of manufacture: 1999 Double-column machining center Machine number: 105220 & 105221 Measuring table Stiefelmayer measuring table X = 6000 mm Y = 3000 mm Equipment ZEISS control system, year of manufacture 2007 The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for specialist customers. (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Year of construction: 1999, condition: excellent (used), Technical Data Year of construction: 1999, upgraded for CNC capability in 2005 1 column pair Table is a single piece and self-supporting Total weight: approx. 12 tons Max. axial speed: 150 mm/s Measuring table X = 7000 mm Y = 2850 mm Z = 600 mm Measuring volume X = 6200 mm Y = 1600 mm Z = 2100 mm Measuring accuracy Nwodpfx Afsff Eaqowek Test report dated 20.04.2017: E = 50 + 40 µm/m, max. 120 µm EM = 70 + 40 µm/m, max. 140 µm P = 50 µm Accessories Control panel Dynalog P2 incl. stand Control system C99 2 RDS CAA swivel heads with CAA file 2 sets of RDS plate connectors Zeiss RST Other Boreholes for positioning system: several pilot holes Ø 22 mm in the rows Y+- 300 in a 300 mm grid in the rows Y+- 700 and Y+- 900 in a 200 mm grid Electrical power supply for machine: 230 V System requires 6 bar compressed air The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you!

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 106721, Technical Data Manufacturer: ZEISS Type: Eclipse Year of Manufacture: 1999 Serial Number: 106721 Measuring Range Nsdpfx Afohy Tc Uswowk X = 500 mm Y = 550 mm Z = 580 mm Measuring Accuracy U1 = (2.4 + L / 250) µm U3 = (2.9 + L / 250) µm The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Year of construction: 2003, condition: excellent (used), Technical specifications Manufacturer: ZEISS Type: Pro Year of manufacture: 2003 Double-column machining center Measuring plate X = 6000 mm Y = 3000 mm The machine can be modernized with new accessories according to customer requirements. Price: upon request! Nsdpfx Afogmpgxjwowk Installation and commissioning possible! We will be happy to prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Changes and errors in technical data, specifications, and prices, as well as prior sale, are subject to change!)

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Nodpfozv Idtsx Afwewk Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 105324, Technical Data Manufacturer: ZEISS Type: Carmet C 160 418163 Year of Manufacture: 1998 Serial Number: 105324 Weight: 400 kg Measuring Plate X = 6000 mm Y = 3000 mm Measuring Range X = 5000 mm Y = 2600 mm Z = 2100 mm The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We would be happy to provide you with a detailed offer. Nodpohy Tc Rsfx Afwowk Note: Our offer is exclusively for professional customers. (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Year of construction: 2000, condition: excellent (used), Technical Data Manufacturer: ZEISS Type: SMM-C Year of Manufacture: 2000 Double-column machining center Measuring Range X = 6000 mm Y = 2 x 1100 mm Z = 2400 mm Nedpfx Asf S A Afofwjwk Equipment Control System: C99 The machine can be modernized with new accessories according to customer requirements. Price: on request! Assembly and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale!)

Condition: excellent (used), Rotary table (probably make Zeiss) Ø 630mm General overhaul 2013 for Pantec control New encoder and read head from Renishaw Nwsdpfjm Exa Ejx Afwek

Condition: ready for operation (used), Joystick box for Zeiss C99 controls. Nwedpfx Afjfh Dpmjwjk Box without speed override: €750.

Condition: good (used), functionality: fully functional, mileage: 91,000 km, power: 121 kW (164.51 HP), first registration: 08/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, Equipment: ABS, airbag, electronic stability program (ESP), full service history, navigation system, power assisted steering, traction control, truck registration, Peugeot Boxer Doka Service booklet available First owner Automatic climate control Navigation system with Bluetooth Nedpfx Afeztzpkowowk Trailer hitch with special approval for 3.5 tons! 3-way tipper body manufactured by Schutz Fzg-Bau, Made in Germany! Various additional work lights Second row of seats with shelving system – original bench seat is included! We would be happy to offer you financing options. Please feel free to call!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW Nwsdpjzpy Idofx Afwok External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm The device is not functional! Nedpfjicnk Ejx Afwowk Chassis for sale.

Condition: excellent (used), Technical Specifications Manufacturer: ZEISS Nsdpfjh R Nchjx Afwewk Type: Contura G2 Technical specifications available upon request The machine can be upgraded with new accessories according to customer requirements. Price: available upon request! Installation and commissioning possible! We would be happy to prepare a detailed offer for you. Note: Our offer is exclusively for specialist customers. (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)