Used Zeiss Measuring Plate for sale (16,957)

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Nledpjy T N H Tsfx Am Tod

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls Nlodpfx Ajy Aubuem Tod centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Nljdpjt T Uavjfx Am Tjd

Condition: used, functionality: unexamined, Equipment: lighting, Used ZEISS AXIO Zoom V16 microscope servo-controlled setup. Nodpfx Ajyybkwom Teld Microscope inspection setup consisting of AXIO microscope and camera (Zoom V16), and ZEISS control system with servo-driven XYZ positioning and lens. Manufacturer: ZEISS | AXIO Models: AXIO Zoom V16, ICc5 camera | Zeiss EMS 3 controller, CL 9000 LED microscope lighting, SYCOP3, MA-R-C Voltage: 4x 220-230V (50/60Hz) Includes computer with installed software, monitor, mouse, keyboard. Frame made of aluminium and stainless steel.

Condition: excellent (used), Passameter Nsdpeylkkvefx Am Teld Manufacturer: Zeiss (108150) Measuring range: 75 - 100 mm Complete with 2 center stops and pin spanner

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Nsdsuq Nfhjpfx Am Tsld Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Possible services: delivery, commissioning

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Njdpszgw D Rjfx Am Teld Checked on: 2016-11-09 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space required: 600 x 450 x 175 mm Weight: approx. 100 kg Nedpfx Aob Ez R Uom Tjld

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23-000209, type of input current: AC, input voltage: 230 V, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, total width: 1,500 mm, total length: 1,600 mm, total height: 2,100 mm, workpiece weight (max.): 100 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, power of the servo motor: 1,000 W, Equipment: documentation/manual, type plate available, We offer this used Carl Zeiss GOM Metrology ATOS ScanBox 4105, manufactured in 2023. Model: ATOS ScanBox 4105 Serial number: 23-000209 Year of manufacture: 2023 Mains voltage: 230 VAC Frequency: 50/60 Hz Phases: 1 phase Nlodpfx Amey U R S Ho Tjd Power: 1 kW Sensor: GOM ATOS Q, 8 megapixels, and 270 mm measuring volume Robot: Fanuc Max. component size: Ø 500 mm, height 500 mm Dimensions (L × W × H): 1,600 × 1,500 × 2,100 mm Made in Germany If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Included: 3D scanner Calibration panel Nljdpfx Amsyxy Sde Ted Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 • Reporting module Delivery

Condition: good (used), Carl Zeiss Axiovert 40C Inverted Light Microscope Nljdpfxoyk Dble Am Tjd The Carl Zeiss Axiovert 40C is a routine inverted microscope specifically designed for examining living cells and cell cultures in biology and medicine. Its inverted design places the objectives below the stage, enabling observation in larger culture vessels such as Petri dishes or microtiter plates. Technical Features Optics: Equipped with the ZEISS ICS (Infinity Color-corrected System) for high optical performance in all contrast modalities. Illumination: Standard with a 12 V 35 W halogen lamp for transmitted light; an HBO 50 mercury vapor lamp (model CFL) is available as an option for fluorescence applications. Contrast modalities: Supports brightfield, phase contrast, and PlasDIC. Camera connection: The Axiovert 40C features an integrated front-mounted photoport (C-mount adapter) for digital documentation. Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Nlodpfx Aoy Hk Ufsm Tjd

Condition: refurbished (used), Used 3D CNC coordinate measuring machine. ZEISS Eclipse 7.7.5 – fully modernized in 2026 with a new UCC-S3 controller, PH10M rotary-swivel system, joystick box, SP25 scanning probe, and a PC with RationaDMIS 3D software. Further details available upon request Nlodpoy Nzr Tsfx Am Ted Measuring range X = 700 mm - Y = 700 mm - Z = 500 mm Price: upon request ᐳᐳᐳ One-of-a-kind item - while available ᐸᐸᐸ Request our detailed quote. Of course, we provide all services such as installation, maintenance, service, training, programming, etc.

Condition: used, Used 3D CNC coordinate measuring machine. ZEISS Prismo 7 – upgraded in 2016 with UCC control, PH10M rotary-head-system, joystick box, SP25 scanning probe, and a PC with RationaDMIS 3D software. Further details available upon request Measuring range Nlodpjy Nzk Aefx Am Ted X = 900 mm - Y = 1200 mm - Z = 700 mm Price: upon request ᐳᐳᐳ One-of-a-kind item - while available ᐸᐸᐸ Request our detailed quote. Of course, we provide all services such as installation, maintenance, service, training, programming, etc.

Condition: ready for operation (used), Year of construction: 2019, total height: 2,797 mm, overall weight: 1,570 kg, This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine. Additional information • Maximum workpiece size: approx. 1344 x 910 x 716 mm • Maximum workpiece weight: 730 kg • Table height: 850 mm • Equipped with vibration damping system • Sensor System: • Articulating head: tilt ±180°, rotation increments 2.5° • Scanning speed: up to 150 points/second • Max. stylus length: 150 mm • Max. stylus weight: 15 g • Min. stylus tip diameter: 0.3 mm • Accuracy (per ISO 10360 standards): • Length measurement error (E₀): 1.7 + L/350 µm (at 18–22°C) • Scanning error (THP): 2.7 µm • Form measurement error (RONt): 1.7 µm • Repeatability (R₀): 1.2 µm • Controller: ZEISS C99L • Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS • Control mode: Motorized / CNC • Interface: Ethernet, USB • Performance: • Drive system: Motorized CNC • Travel speed (axes): 0–70 mm/s • Max. vector speed: 465 mm/s • Max. acceleration: 1.85 m/s² • Scanning speed: up to 125 mm/s • Utilities: • Power supply: 100–240V AC (±10%), 50–60 Hz • Max. power consumption: 800 VA • Typical power usage: 200 W • Compressed air: 6–8 bar, pre-cleaned, dry (ISO 8573-1 Class 4) • Air consumption: max. 120 Nl/min • Environmental Conditions: • Operating temperature: 18°C–22°C • Relative humidity: 30–60% (non-condensing) • Compliance & Certifications: • Conforms to EC Machine Directive 2006/42/EC • EMC Directive 2014/30/EU • Quality management: ISO 9001:2008 Nodpfxjx D Ngfo Am Teld • Environmental management: ISO 14001:2004 • Accredited ISO / IEC 17025:2005 Dimensions Machine Depth 1975 mm

Condition: refurbished (used), functionality: fully functional, Used machine retrofitted with new CNC-controller and new 3D-geometry-software The equipment of the measuring machine is freely selectable. We procure the right components from the customer "just in time". Machine will be modernized with new controller, probe head, probes from Renishaw, PC and 3D software RationalDMIS. Nsdpfxexzp U De Am Tsld Technical Data: Measuring Range apprx: X = 1.000 mm - Y = 1.200 mm - Z = 600 mm Accurracy: MPEE : 1.9+L/300 according the manufacturers specification Illustrations still with original probe configuration Price on request >>> single machine - as long as available

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 133084, measuring range X-axis: 3,000 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, Carl Zeiss Pro T compact 3D coordinate measuring machine Nedpfx Ameyclnkj Tsld TECHNICAL DETAILS Control: C99S / FW: 19:05 Measuring head: RDS CAA No. 165: TP20 Measuring software: CMM-OS 5.4.12 Calibration sphere: 13320 r=15.00000 Measuring range: 3,000 x 1,600 x 2,100 mm CMM expansion coefficient X: 11.9 x 10-6 K-1 CMM expansion coefficient Y: 11.9 x 10-6 K-1 CMM expansion coefficient Z: 10.4 x 10-6 K-1 Holos software version: Holos 2.10 SP23 Rev. 3712 CMM-OS software version: CMM-OS 5.4 MACHINE DETAILS Length: 3,500 mm Width: 2,030 mm Height: 3,600 mm Calibration certificate and maintenance schedule from 2022 available

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Nljdpfxswk Rlxe Am Tjd Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, • Used device with upgraded cathode systems o LAB6 cathode o Tungsten cathode • EDX (Energy Dispersive X-ray Spectroscopy) allowing direct chemical analysis in the SEM • Lens-mounted 5-channel BSD • Infrared camera mounted on the chamber door • Maintenance by manufacturer (Zeiss and Oxford Instruments) until 2024 • 2x 19” flat screen monitors • Joystick controller for stage movement • Ergonomically designed control console • Software module for automatic centering of any image detail • Stage base plate, motorized X+Y axes • Stage assembly includes tilt, rotation, and Z-axis; removable Accessories • Transport lock and transport castors • 2x Wehnelt + anode + 3 tungsten filaments • Table spacers (3 pieces, different heights) + tools • 1x 9-position sample holder for rods o Collimator shorts 150 o Collimator long etc. 150 o Collimator long 50/80 mm² MK2 • 1x fixed aperture holder Njdpfsy Ep S Rjx Am Teld • 2x 100 μ VP – aperture • 1x 750 μ VP – aperture • 2x 20 μ aperture • 1x 30 μ aperture • 1x 100 μ aperture • Various tools (tool kit) and sealing rings • 1x Lens-mounted 5-channel BSD (1 EVO BSD DIODE 5 CH Standard, low light sensitivity. With signs of use, possibly for replacement) AZtec Adv Rec. 3.2 + Update 2024

Condition: excellent (used), The probe was used on a Zeiss Prismo Ultra as a replacement probe with few operating hours. Nlodpfey Epm Ijx Am Tod

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, type of input current: AC, overall weight: 1 kg, For sale: ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industrial and research applications, especially when components need to be measured in challenging environments. Fast application, easy operation. Condition: Lightly used, predominantly for trade shows, exhibitions, and training purposes only. Scope of delivery: · T-Scan Hawk 2 Lite · Class 2 blue laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS-calibrated) · Sensor cable · Transport case · Acceptance test in our facility with calibration bars in accordance with ISO 10360 · Acceptance certificate with traceability documentation · ZEISS INSPECT OPTICAL 3D Free · T-SCAN Hawk 2 sensor driver ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing, and processing of polygon meshes · Element construction: standard geometries, points, sections, curves, surfaces, dimensions · CAD import for standard formats: IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · CAD comparison with colored deviation display · Dimensioning and geometric tolerancing analysis according to ISO GPS and ASME Y14.5 · Reporting module T-SCAN Hawk 2 Sensor Driver · Setup and calibration · Guided user calibration · Data acquisition and project management · Configurable workflow assistant · Switching measurement modes and setting exposure time directly on the sensor · Automatic sensor calibration monitoring Njdpfx Amjw Swple Teld · Pre-capture of reference points with graphic support · Real-time display of sensor position and acquired 3D scan data · Continuous transformation into a common coordinate system · Merging upper and lower surfaces · Removal of background points · Automatic calculation and export of non-overlapping polygon meshes · Export of scan data (e.g., G3D format, STL format) Note: The device was exclusively used for demonstration, training, and exhibition purposes, so some signs of use are visible. If required, we can provide a suitable laptop for an additional charge. 3D acceptance certificate available. We are also open to trade-in of older GOM systems upon purchase of the T-SCAN Hawk 2.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories Nlodpew Rdvvofx Am Tjd • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Further information available on request!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 153888, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 20 kg, total height: 1,770 mm, type of input current: DC, total width: 1,351 mm, total length: 1,055 mm, year of last overhaul: 2022, ambient temperature (max.): 35 °C, ambient temperature (min.): 17 °C, Equipment: lighting, For sale: Optical-Tactile Measuring Machine The device is in excellent condition and has been serviced regularly and professionally. Calibration certificates are available. Technical data: Measuring range: 400 mm x 400 mm x 400 mm Year of manufacture: 2011 Sensor technology: Optical: ZEISS Discovery zoom lens Tactile: VAST XXT probing system Njdpfx Ajylkfaom Told Software: ZEISS CALYPSO Additional software: CALYPSO Freeform Surface BasLic; dongle-based basic license for the current software version Accessories: • Computer, mouse, keyboard, monitor • Smooth calibration sphere (for tactile probe) • Matte calibration sphere (for white light interferometer) • Calibration standard – optical • Calibration standard – tactile • 3 probes: reference probe, 3x50, 1x20 with 30 mm extension • DAkkS calibrated in 2022 • Software: Calypso 2019 dongle license • Tactile probe head • Optics • White light interferometer • 3-position probe change rack • Operating manual • Additional software: CALYPSO freeform surface, BasLic, dongle-based basic license for the current software version Transport and loading can be organized on request, at an additional cost, Europe-wide. Prices are subject to VAT. Viewing by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Gjbn N Ay Dowza Dxogoil Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Nodpsyam S Ssfx Am Tjld

Condition: ready for operation (used), Year of construction: 1996, Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Nledpfx Amewzldwe Ted