Used 1 Transformer 1000/800 Kva, for sale (85,241)

Condition: new, functionality: fully functional, machine/vehicle number: NEW - 50, empty load weight: 223 kg, maximum load weight: 777 kg, overall weight: 1,000 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 113 1000 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Sidewall height incl. railing: 43cm Loading platform height: 52cm Gross vehicle weight: 1000kg Payload: 777kg Braked single-axle low loader Overrun brake and handbrake by AL-KO 1000kg axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust phenolic plywood side panels Steel railing Rear tailgate foldable and removable with tension latch 15mm strong, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400kg pull force each 13" tyres 2x U-chocks Net/rope hooks on frame 13-pin plug Front marker lights Rear lights with reversing light, rear fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY PRICE REDUCED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front wall - Loading ramps Fedpfxjrk Ikqj Ahpspi - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Flat tarpaulin with or without bows - High tarpaulin 120cm, openable on all sides - Rear supports More accessories available on request! Plus freight to Gera and vehicle registration document €100 net Pictures are examples and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock, ready for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including caravan axles. Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or drop by in person.

Condition: new, Year of construction: 2025, machine/vehicle number: FGWPEP80AYCC6308, fuel type: diesel, motor manufacturer: Perkins 404A-22G, General information Field of application: Construction Weights Empty weight: 385 kg Functional Generator capacity: 22 kVA Fpedpey Ddqzjfx Ahpoi Dimensions of cargo space: 155 x 62 x 102 cm CE mark: yes Other information Fuel consumption: 3.9 L/Hour at 75% Load Prime Generator: FGL10060 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 55 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Year of construction: 1993, condition: used, machine/vehicle number: P 285, pression: 800 kN table size: 600 x 900 mm Fpjdpfx As N D Anohpji space needed: 1150 x 1900 x 2700 mm weight: 6000 kg

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Dimensions (per container): Length: approx. 12,200 mm Fpsdpjy Iu Hnefx Ahpoi Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Fodpsuu Rthefx Ahpjpi Y-axis travel: 700 mm Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 2000, Second-hand single-head drilling machine with table, BOHLE Type GBM 1/800/10, year 2000 Fsdsyll Upjpfx Ahpjpi

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles: 1 Fsdpfx Ajd S Ualjhpepi Full-bore diameter: 5-40 mm Drilling depth: 1,000 mm

Condition: good (used), Year of construction: 1990, operating hours: 12,332 h, functionality: fully functional, machine/vehicle number: 1684, total length: 5,000 mm, total width: 2,350 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, pressure: 7 bar, heating capacity: 63 kW (85.66 HP), operating pressure: 7 bar, BvL cleaning plant / washing system Hot wash system Chamber/trolley dimensions: 2200x800x900 mm Was in operation until 04/25, then cleaned and decommissioned. Will be dismantled in July 2025. Fpjdpfx Ahsw Dpk Hspoi Trolley for hanging parts is available. Various spare parts are available and included with purchase. See drawing and pictures. For further information, please feel free to contact me.

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Travel in X: 220 mm Fjdpfx Asy H Abkjhpjpi Travel in Y: 160 mm Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Base without evaluation .

Condition: good (used), 800 / 2700. Serviced and inspected. Folding machine included. Fedotphi Hjpfx Ahpspi

Condition: used, Year of construction: 2015, First registration: / 01.01.2015 / _____ / machine type: SM-P-1-10ZK / incl. straw blower / hopper volume: 1000m³ / feed discharge on both sides / hydraulic support leg / mixing system: vertical mixer / scales defective! / Fedpfx Asqrryrjhpepi

Condition: refurbished (used), DALEX seam welding machine, transverse seam version Outreach: 350 mm Rated power: 160 kVA Secondary short-circuit current: 38.5 kA Secondary open-circuit voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-stage switch and auxiliary control unit with thyristor power stage and synchronous welding control MPS 100 multi IMPORTANT NOTE – PLEASE PAY ATTENTION Fpsdsdx Suhspfx Ahpoi The above-mentioned performance data comes from the machine's nameplate. During inspection of the machine, it was found that a 200 kVA welding transformer had been installed by the previous owner. This changes the performance data.

Condition: new, Year of construction: 2024, Manufacturer: Green Transfo Type: Minera MP Year of construction: 2024, unused Available units: 9 units Rated power: 7000 kVA Rated voltage: 30 / 0.72 kV The transformers are being sold due to an incorrect order. It was subsequently discovered that 33 kV transformers were required – the offered models only provide 30 kV each. Therefore, they are now for sale. Fpjdpovx Tmisfx Ahpei Condition: Unused, fully functional, technically perfect

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Fpjdpfx Ahswtg Hdspoi

Condition: ready for operation (used), Year of construction: 2018, A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Fpsdewhfnpepfx Ahpei

Condition: new, - 7.5 kW (10 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table 3,200 mm Fedpswh Um Uefx Ahpopi - Scoring tool preparation - Parallel stop, cutting width 1,000 mm - Miter stop 3,450 mm, without length compensation - Table top extension/widening: Powder-coated surface Further options available upon request!

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Fsdpfx Aew E H E Rshpjpi Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: ready for operation (used), -Drill diameter: 5~25 mm -Drilling depth: 1000 mm -Tailstock -Tank Fpjdpfjdgpltox Ahpoi -Pump -Filter

Condition: used, 1-roller calibrator with 1000 mm conveyor Fpjdpewx Ra Sefx Ahpji

Condition: new, Title: STOCK CLEARANCE: New Generators & Power Units (1-500 kVA) – Pramac / CGM – Immediately Available Description: Looking for emergency power systems available for instant delivery—no long waiting times? We offer one of the largest stocks of new generators available on-site. Fpodpfxjyifn Is Ahpsi Technical Details & Scope: Power Range: 1 kVA to 500 kVA Fuel: Diesel and petrol Categories: Emergency power, continuous duty, site generators, light tower units. Condition: NEW & in original packaging. Thanks to our extensive stock, we can respond promptly to enquiries – ideal for large-scale buyers, resellers, or export to crisis regions (e.g., Ukraine). Your Benefits: No lengthy lead times. On-site inspection of goods possible. Large quantities available for projects. Interested? Send us your requirements now. We will promptly provide you with an offer for a suitable solution.

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. Fpedpfx Ajrzakmshpsi - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Year of construction: 2001, condition: used, 800 kVA transformer substation, year of manufacture 2001, 10/0.4 kV, oil-filled transformer, manufacturer: ELIN, OS/US porcelain bushings. Fpjdpfx Asza Urmohpei

Condition: good (used), Year of construction: 2006, Oil hermetical distribution transformer, producer - in licence ELIN, made in Czech republic, 800kVA, 22/0,42kV, Dyn1, ONAN, uk=5,54%, year of production 2006, functional. Fsdsuau E Dspfx Ahpjpi

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Oil hermetical distribution transformer, producer - ELIN, made in Czech republic, 630kVA, 10/0,42kV, Dyn1, ONAN, uk=4%, year of production 2006, functional, rutine test report, design documentation, available 2 pcs. Fedpfxsx Nxtuo Ahpepi

Condition: ready for operation (used), Siemens 6BK1000-0AE20-0AA0 Box PC 627-KSP EA X-CC, SN: VPV8001967, without hard drive, serial number as per photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fsdpfxji Edh Ro Ahpopi