Used Bulmor Bhx40/12/45 for sale (30,024)

Condition: used, maximum load weight: 36,250 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame: Chassis frame made of high-quality steel, but without an outer frame. Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337. With crossmember and container locking mechanisms for accommodating: a) 1 x 45' High-Cube container b) 1 x 40' High-Cube container c) 1 x 30' ISO container, flush at the rear d) 2 x 20' ISO containers e) 1 x 20' ISO container, flush at the rear g) 1 x 45' ISO container h) 1 x 40' ISO container With 1 pair of height-adjustable container locking mechanisms and 3 pairs of foldable center supports, plus crossmember and container locking mechanisms for accommodating: f) 1 x 20' ISO container in the center Frame extension at the rear, mechanically extendable, load capacity approx. 5,800 kg, with spiral cable. Low-maintenance guidance on special plastic sliders and 2 extension rollers. KÖGEL frame extension at the front, manually extendable and mechanically lockable, incl. container guide on the left and right. Designed according to Directive 719/2015. Frame extension in the center, manually extendable and mechanically lockable with the tractor unit. Chassis: Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h. Operation on the chassis via switch. Additionally possible from the cab (switch in the cab necessary - PIN 12). When transporting 30' and 45' containers, the 1st axle CANNOT be lifted! BPW three-axle unit, with disc brakes Ø approx. 430 mm, mounting depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires: Wheels with internal sensors according to UN ECE R141. Tires 6-fold 385/55 R 22.5 UNIROYAL TH 50. 6 steel rims 22.5 x 11.75, mounting depth approx. 120 mm (ET 120). Chassis Components: JOST landing gears, mechanically operated with leveling foot, 24 t lifting capacity. One-sided operation in the direction of travel, on the right. Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with mud flaps. 2 chock blocks with holder. Side protection, according to ECE-R73, closed. Rear underrun protection made of square steel tube according to ECE-R58, screwable. Height of the underrun protection profile min. 120 mm, designed for increased test forces. Isdpfx Aozkx Hzjcistl Brake / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. Air suspension system incl. 1 raising and lowering valve, mounted on the left in the direction of travel in front of the axle unit. 2 non-interchangeable coupling heads at the front ISO 1728. Air reservoir for brake system and air supply made of steel (EN 286-2). Rear Impact Protection: Continuous steel rear impact protection, solid, on the end member at the rear. Information Systems: Tire pressure monitoring system according to UN ECE R141. Accessories: Document tube, diameter approx. 105 mm. Mounting on the left in the direction of travel on the side protection. 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounting incl. holder and protective cover on the left in the direction of travel o

Condition: excellent (used), mileage: 1,438,123 km, power: 331 kW (450.03 HP), first registration: 03/2015, fuel type: diesel, wheelbase: 6,250 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 9,990 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, parking heater, retarder, = Additional Options and Accessories = - (Roof) spoiler - Aluminum fuel tank - Climate control - Refrigerator - Sleeping berth - Air suspension - Air horn - Radio/CD player - Side mirrors with electric adjustment - Transceivers - Sun visor - Digital speedometer Itsdpfx Ajzklahecijl = Additional Information = General Information Cab: simple License plate: 34-BFT-8 Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Weights Unladen weight: 10,222 kg Payload: 16,778 kg GVW: 27,000 kg Maintenance APK (Technical Inspection): valid until 01/2027 Condition Technical condition: very good Optical condition: very good Damage: none

Condition: good (used), devapo hotAir Midi 12 convection oven Devapo's hotAir convection ovens are specially designed for reheating and baking food/ingredients and bake-off products. This design is equipped with a highly functional and customer-friendly operation. Two operations (selection of the desired preparation time and temperature) ensure a guaranteed and consistent end product. HotAir grille included Isdpfxsi Ey T Io Acijtl Visual hard-screen display with LED illumination On/off/open switch Stepless temperature setting switch End signal Advanced Airflow System Rotary knob Anti-tilt protection Special thermal insulation Robust certified construction Service friendly control cabinet Removable ventilation plate All stainless steel construction Self-ventilating door Electrical connection 230 VAC Capacity single portion tray 225 x 175 x 35 mm / 250 x 190 x 45 mm: 12 pieces Capacity portion trays 160 x 115 x 30 mm: 24 pieces Dimensions 680 mm x 490 mm x 549 mm (W x D x H) Item condition: used Scope of delivery as shown Further articles - new and used - you will find in our store! International shipping costs on request!.

Condition: ready for operation (used), Siemens SIMOTICS 1FT7084-5WF71-1BH1 synchronous motor SN: YFKN610414703001 – Encoder AS24DQ1 P05 / Brake 24 VDC 24W 48Nm / Brake 24VDC 18.0W 3606301 RN 004, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery scope as per photos. Itodpfx Aox Du T Djcijl

Condition: used, functionality: fully functional, machine/vehicle number: 9401, Year of construction: 2017, operating hours: 7,574 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 695 mm, fuel type: diesel, mast type: duplex, construction height: 3,240 mm, power: 70 kW (95.17 HP), fork carriage width: 1,520 mm, fork length: 1,200 mm, empty load weight: 10,210 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,000 mm, Sideload forklift Chassis number: 9401 Load centre: 600 Fork width: 200 mm Fork thickness: 50 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Refurbished with warranty Technical condition: good Front tyre type: Pneumatic Front tyre size: 300x15 Front tyre condition: 40 - 60% Rear tyre type: Pneumatic Rear tyre size: 300x15 Rear tyre condition: 40 - 60% Rear work light, front work light, heater, full cabin, CE certificate, joystick, Radio CD, Itjdpfx Asyhm H Eociel

Condition: excellent (used), mileage: 285,207 km, power: 132 kW (179.47 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 7,950 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 5,580 mm, loading space width: 2,490 mm, loading space height: 2,410 mm, Year of construction: 2012, Equipment: tail-lift, General information Cab: single Registration number: BZ-VF-78 Technical information Number of cylinders: 4 Engine capacity: 4.462 cc Max. front axle load: 4480 kg Max. rear axle load: 8480 kg Weights Empty weight: 5.660 kg Carrying capacity: 6.430 kg GVW: 11.990 kg Max. towing weight: 15.490 kg Functional Tail lift: BAR CARGOLIFT, tail lift Maintenance, history and condition APK (MOT): tested until 04/2027 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 Iedpfozyyqtox Acistl EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, working width: 450 mm, warranty duration: 12 months, total height: 220 mm, total width: 460 mm, total length: 880 mm, water tank capacity: 10 l, We offer for sale a BR 45/10 Esc Staircase Scrubber Condition – Very good Year of manufacture – 2014 The machine is in very good condition – both visually and technically. It has undergone a complete, thorough overhaul, making it fully functional and ready for operation. Each device we offer is presented in authentic photos – you are buying exactly the machine shown in the pictures. All machines purchased from us come with a 12-month WARRANTY. Technical Data: Brush working width (mm): 450 Working/suction width (mm): 450 Tank capacity (l): 10 Brush rotation speed (rpm): 290 Itedpsw Igrzefx Aciel Brush motor power (W): 190 Vacuum motor power (W): 1500 Voltage (V): 220 / 240 Frequency (Hz): 50 Weight (kg): 44 Dimensions (L x W x H) (mm): 880 x 460 x 220

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: SRC12NC0423, controller manufacturer: Siemens, overall weight: 700 kg, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 70 l, operating pressure: 210 bar, number of digital displays: 1, Equipment: emergency stop, Tube Expanding/Reducing Machine PE-TRA SRC-12 NC We offer a used, fully functional PETRA SRC-12 NC machine for hydraulic tube end expanding/reducing. The machine is designed for professional industrial applications. The machine features 12 expanding stations, enabling multi-stage forming processes. The design was developed with demanding industrial applications in mind, including the production of tubular structures, the shipbuilding industry, industrial installations, and the production of exhaust systems. Key features: - Manufacturer: PETRA - Model: SRC-12 NC - Used machine - 12 expanding stations - Hydraulic drive system - Hydraulic system power: 4.5 kW - Maximum hydraulic pressure: 210 bar - Hydraulic tank: 70 l - Control: Siemens PLC + HMI - Operator panel with touchscreen - Simple selection and adjustment of tool stations - Programmable and adjustable expanding sequences - Foot control - Power supply: 380 V / 3 phases / 50 Hz - Robust construction for industrial applications Applications: - Production of tubes and tubular components - Shipbuilding industry - Industrial installations - Production of exhaust systems - Forming and expanding tube ends Transportation is the responsibility of the buyer. Ijdpfszy I H Nox Acijtl

Condition: excellent (used), RS Simulators Type: ST2K320/45 K Shock test system, water-cooled Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Humidity levels in the upper test chamber Climate temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (± 2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Total power: 13 kVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Isdpfx Acjzgbuteietl Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 45,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,550 mm, fork carriage width: 3,500 mm, empty load weight: 52,700 kg, total length: 7,800 mm, drive type: Diesel, construction width: 4,150 mm, Diesel forklift Load center: 1200 ISO class: Terminal West Mast type: Standard Condition: Ready for use and fully functional Itodpfez Awwpex Aciol Technical condition: very good Front tire type: Pneumatic Front tire size: 18.00-25 Rear tire type: Pneumatic Rear tire size: 18.00-25 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG450-12. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale at our premises. Side shifter, fork positioner, Heater, full cabin, air conditioning, scale.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: AC, input voltage: 400 V, year of last overhaul: 2025, input frequency: 50 Hz, Equipment: documentation/manual, Manufactured by Eurostar Italy - one of the leading filling manufacturers Designed for filling Apple Cider, Beer, CSD and still drinks Triblock -rinser - filler - capper 2,000 BPH at 500ml bottles Itedpfex A U Urjx Acijl 3,000 BPH at 330ml bottles Isobaric Counterpressure Filling, designed for cider, beer, and other still & sparkling beverages Double Pre-Evacuation with Vacuum Pump, ensuring minimal oxygen pickup for superior product quality 316 Stainless Steel contact parts for superior hygiene and durability Pneumatic Bottle Lifters - overhauled 2025 Twin-channel rinser with final blow-off - overhauled 2025 Crown Cap (26mm caps) Capper Bypass - to feed to other cappers Touch Screen Control Panel for easy operation and monitoring Siemens PLC System, providing precise process automation and flexibility Variable speed control via inverter drive CIP Cups, Cleaning fluid can be recycled Change Parts Included for 250ml, 330ml, 500ml, and 750ml glass bottles Heavy-duty stainless steel frame CE-compliant safety Includes all manuals Spare Parts package Spare Fill tubes - new for adaptation to any bottle fill height Spare filling valve seals etc. Can be loaded to buyer's transport

Condition: used, Year of construction: 2013, operating hours: 812 h, lifting height: 4,450 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H1.6FT diesel forklift, year of manufacture: 2013, hours: only 812!, previous owner: German Armed Forces, rated load capacity: 1,600 kg, lifting height: 4,450 mm, triplex mast, hydraulic fork positioner, hydraulic side shifter, diesel engine [29 kW/39 hp], scale: Drexel DI 47 with printer, weight: 3,500 kg, immediately ready for use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! Itodpfx Ajz Dm Udscisl Cabin = Further information = Lifting capacity: 1,600 kg Overall height: 220 cm Please contact Tobias Ebert for further information.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock testing system Operating climate range Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Itodpfezgbumjx Acisl Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, number of axes: 3, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers Iodpfsyffgrox Acietl • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,400 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 30 mm, actuation type: hydraulic, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Panel saw ALTENDORF, F45, with scoring unit, tilting and height adjustment of the saw blade electrically controlled up to 45 degrees, sliding table 3000mm. Isdpfxszzy Sas Acistl

Condition: excellent (used), Gear, cogs, gear shaft -Gear shaft: helical Iodsh Ra Hgopfx Acietl -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

Condition: used, Year of construction: 2023, Transport width 2.98m Tine arms 4x12 Hydraulic adjustment of / working height Conversion kit 5 tines for rear rotors Standard PTO shaft / standard wheels 550/45-22.5 Swath former Set of LED working lights / working width 10.0-12.50m Kre Iedpfx Acerxtbuoistl

Condition: ready for operation (used), Siemens 1FT7064-5WK71-1MH1 synchronous motor SN:YFHN631252803001, professionally fully overhauled and tested with 12-month warranty, 100% functional, supplied as per the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Ijdox Du Alspfx Aciotl

Condition: new, empty load weight: 1,750 kg, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic transverse locking system. Superstructure: 12-ton roll-off system for containers with a hook height of 3.6m to 5.5m, 1570mm, Titan version, hydraulic combination container locking system (inside and outside), RAL 9005 Jet Black, equipment length: 4500mm! Price per unit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Itjdpfx Acszakpboiel

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Iodpszl D Rusfx Acistl Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Iedpfxjxf Ak Te Acistl Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Year of construction: 2022, condition: ready for operation (used), overall weight: 4,500 kg, This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this tube bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D tube bending machine. Contact us for more information about this machine. • Max diameter (steel 450 n/mm²): ∅ 45x4 mm // max diameter (stainless steel 700 n/mm²): ∅ 40x3 mm // max diameter (steel 450 n/mm²): 40x35x2 mm • Tube passage in the collet: ∅ 45 mm • Useful working length with tube passage in the collet: 5100 mm • Bending angle max: 180+10° • Speed y axis: 150 °/sec. // speed x axis: 450 mm/sec. // speed z axis: 360 °/sec. • Precision y axis: +/-0. 1° // precision x axis: +/-0. 1 mm // precision z axis: +/-0. 1° • Bending: clockwise • Total installed power: 15 kw • Voltage and frequency: 400 volt / 50 hzMachine still under powerSquare tube sizes: 12x12, 20x20 • Round tube diameters: 12, 16, 20, 22, 27, 33.7 • Notes: • Square 12x12 can also be used for round diameter 12 • Square 20x20 can also be used for round diameter 20 Isdpfxeyzg A Uo Acietl

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 9,385 h, load capacity: 18,000 kg, lifting height: 3,540 mm, fuel type: diesel, mast type: simplex, construction height: 3,650 mm, fork carriage width: 1,600 mm, fork length: 1,600 mm, empty load weight: 29,590 kg, total length: 7,100 mm, drive type: Diesel, construction width: 2,650 mm, Side loader Load center: 800 Fork width: 200 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Ijdpfx Acjzxu D Ssiotl Front tire size: 16.00-25 Rear tire type: Pneumatic Rear tire size: 16.00-25 Description: In addition to this Bulmor model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DQ180/16/35. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Heater, full cabin, Platform height: 1,670 mm; front/rear camera; Webasto

Condition: new, turning length 850 mm turning diameter 400 mm Itjdpfxexaaxwj Aciel swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip rear wall - Operating tool

Condition: reconditioned (used), Year of construction: 2012, operating hours: 982 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, Hako Hakomatic B45 TB510 scrubber-dryer New SIAP 12V 105Ah gel batteries (2x) Year of manufacture: 2012; 982 operating hours 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger simplifies daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and a new suction hose New suction motor ensures high water pickup performance from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah gel batteries (2x) NEW 24V 400W suction motor Itjdpfez Aqw Njx Aciel NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing work interruptions for refilling The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.