Used Cewe Pa50-150 for sale (9,936)

Condition: new, empty load weight: 118 kg, maximum load weight: 632 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,475 mm, loading space width: 1,063 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer New Garden Trailer 150 KIPP with additional drop sides, support wheel and gray flat cover New Garden Trailer 150 KIPP trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 6 to 8 working days. Once you have received the car trailer, all you have to do is register it. Advantages of a Garden Trailer 150 KIPP car trailer Itodpet Id Sksfx Aciel If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want!

Year of construction: 2008, condition: used, 1800 mm efective widths je 400 mm length in total 2000 mm length in width je 500 mm carrying capacity je 3000 kg material Aluminium weight je 33 kg Iedpfx Acefu I Sdjiotl

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems -Price: complete -Dimension: Ø 150 x 60 mm -Weight: 2,1 kg/piece Iodefzluzjpfx Acijtl

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements Itodpfx Acsfzlvmsisl -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, empty load weight: 50 kg, input frequency: 50 Hz, Tool tempering heating: 9 kW. Temperature: 150°C. Iedpfx Acezab A Eeietl

Condition: good (used), Year of construction: 1992, machine/vehicle number: 181192, Offer 24037 Hydraulic welding rotary and tilting table – three axes - welding manipulator Technical data: - max. load capacity 150 kg - faceplate diameter 800 - min. table height in horizontal position approx. 600 mm - max. table height in horizontal position approx. 1100 mm - faceplate can be swiveled or tilted hydraulically - faceplate rotates clockwise and counterclockwise - rotary movement can be controlled electrically hydraulically Itodpsv Hcabofx Acijl - welding current transmission approx. 500 A - drive 400 V - connected load approx. 0.75 kW - space requirement approx. W 1700 x H 1450 x D 1000 mm - weight approx. 900 kg

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Iodpfxou Nvh Us Acietl Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Weight : 840 kg Electrical data : 415 V ; 150 kVA ; 50 Hz - equipped with a photocell - tool water cooled

Condition: good (used), functionality: fully functional, mileage: 125,000 km, power: 110 kW (149.56 HP), first registration: 07/2011, fuel type: diesel, color: white, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, Used truck ISUZU M 50 C 150 3-sided tipper, year 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5000 kg (C license), payload 2,500 Kg, air conditioning, ABS, Euro 5, 70% tires, mechanical spring suspension, electric mirrors + windows, radio, Km 125,000, good condition. Ijdsuiyaljpfx Acistl INFO ENG: Used truck ISUZU M 50 C 150 3-sided tipper, first registration 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5,000 kg (license C), payload 2,500 kg, air conditioning, ABS, Euro 5, 70% tyres, mechanical leaf spring suspension, electric mirrors + windows, radio, 125,000 km, good condition.

Condition: new, 2 Michaelis control units. Iedezaalrspfx Aciotl

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Mould height min-max: 200-550mm Type: Horizontal Drive: Hydraulic • Screw diameter: 25 mm • L/D ratio: 17.5 • Max screw stroke: 90 mm • Theoretical shot volume: 44 cm³ • PS shot weight (theoretical): ≈ 40 g • Max injection pressure: up to 2500 bar Iedpfexl Hpgox Acistl • Max plasticizing rate (PS): ~6.5 kg/h • Screw torque: up to ~210 Nm • Heating capacity: ~11 kW

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Itjdpfxoxhfuas Aciel Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected power: 380V, 1.84kW Speed: 2840 rpm Ijdpfxoh U Dams Aciotl Number of spindles: 21 pieces, pitch 32 mm Spindle spacing: 640 mm Spindle rotation direction: 11x right, 10x left, M10 thread 2x safety chucks pneumatic foot valve Table size: 880 x 400 mm 1x side fence with 2 folding stops 1x base fence 1x miter fence Unfortunately, we cannot respond to inquiries that do not contain complete contact information.

Condition: used, Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater -Manufacturer: Stego, switch cabinet heating -Type: CSF 060 -Power: 150 watts Isdpfx Asf Rluqscistl -Voltage: 120-240 V -Dimensions: 150/60/H90 mm -Weight: 0.4 kg

Year of construction: 2001, condition: used, press capacity 148 to material Hartmetallstangen quality Extrusionspressvorgang 0 Itsdpfx Acst Hw Sneiel

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität air pressure max. 4 bar Pressure line 28 N / mm Capacity of dye tub Zwickel - 0,3 Liter Capacity of dye tub Becken - 1,3 Liter Speed driven roll 0-25 U/min Iodpfxsu Dn Uvs Acijtl speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, • by means of wheels the pressure roll is driven when the nip is open.

Condition: ready for operation (used), Bosch VM 60 / 150 power supply module 1070046009-112 SN:275136, used, normal signs of use, 100% fully functional, delivery as shown in photos. Itedpfsx Eqzpex Acisl

Condition: good (used), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1 is 150 mm Swing steady 2 is 350 mm Swing steady 3 is 500 mm 3 units suitable for TPK 90 (or with spacers TPK 110) Spacers are not included 2nd tool post to be mounted on slide Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 1200 mm Width 800 mm Height 1000 mm Weight Iedpfxjwrrbko Aciotl 1800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Year of construction: 2022, condition: like new (used), functionality: fully functional, Systec Autoclave VX-150. Itodpfewurptsx Aciel Display with touch operation. Capacity: 166L. External dimensions (HxWxD): 112x65x92cm. Integrated printer. Loading basket with bucket. Tools for: filter replacement, water stopper. Temperature range: -10°/+150°C. Pressure range: -1/+4bar. Unused. Incl. functional guarantee.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 2391, Offer 25398 Iedjygk A Ijpfx Acistl Technical Data: - Temperature continuously adjustable up to 300 °C - Power supply: 220 V - Usable internal chamber: 300 x H 530 mm - Space requirement: approx. 700 x H 750 mm - Weight: approx. 25 kg

Condition: ready for operation (used), Indramat KDA 3.3-150-3-A00-W1 AC main spindle drive MNR: R911257443 SN:256355-02941, used, normal signs of wear, 100% functional, scope of delivery as per photos. Itjdpfx Acex Dw Hasijl

Condition: ready for operation (used), Indramat KDA 3.3-150-3-A00-W1 AC main spindle drive SN:256355-01253, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per the photos. Itjdpfxjx Dw Hgs Aciel

Condition: used, Year of construction: 2025, New demonstration machine! List price: €4,938 net. The upper part is made of heavy-duty cast iron and features a built-in three-phase motor, 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; motor circuit breaker and main switch according to VDE; dimensions of the sanding belt backing: 850 x 150 mm; steel table with height adjustment via spring pressure; belt dimensions: 150 x 2280 mm; the sanding belt backing is coated with a graphite sliding layer; the machine is supplied with a set of sanding belts; additionally included in the scope of delivery is an angle and miter fence. The machine is dust-tested (GS) according to Holz-BG-Stuttgart when connected to a central dust extraction system with an air velocity of at least 20 m/s. Standard equipment: - swiveling 90-180° - motorized belt oscillation - small support table on the idler pulley - pneumatic belt tension. Technical data: Motor power: 2.2 kW, sanding belt dimensions: 150 x 2280 mm, sanding belt speed: 22 m/s, table size: 750 x 350 mm, space requirement: 1000 x 800 mm, weight: from 180 kg, dust extraction port diameter: 100. Itsdpfx Acox Hwpveisl Storage location: Rieth.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 150 t, working width: 4,100 mm, working range: 4,100 mm, Used high quality very accurate Edwards Pearson PR6 150/4100 CNC Pressbrake for sale New / Year 2002 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 150ton / 4100mm x 150ton Fully serviced Very late Pr machine before Bystronic pressbrakes Complete with with: Cybelec CNC Control with Colour Graphics  Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full Top and Bottom Tooling Has come from a company that manufacture’s for the architectural sector and has mainly been folding aluminium New tooling to fold your products on this press available Can be seen working Itjdpfxov Ub Elo Acisl

Condition: used, Year of construction: 2000, Used machine Year of manufacture 2000 special SCM guide system of the saw carriage. The arc-shaped arrangement between balls and running guides as well as the hardened contact surfaces ensure exceptional and constant precision Itsdpfxezlbr Ao Acisl the scorer can be swivelled in and out from outside without any problem; a special plate enables precise positioning the fence is extremely robust and can be used for both rip cuts and angle cuts; fast return to the initial position. The precise flip stops enable a direct reading of the dimensions over the entire length Table dimensions 830 x 1200 mm Saw carriage 1500 x 290 mm Cutting length 1500 mm Tilt of the saw blade 45° max. diameter main saw blade 300 mm max. diameter scoring saw blade 100 mm max. cutting height 90° = 95 mm max. cutting height 45° = 67 mm Saw blade speed 4000 rpm Scoring saw speed 8000 rpm Cutting width with parallel guide 1000 mm Diameter extraction port 100 mm Motor 4 kW Weight: 425 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2013, Year of manufacture: 2013 240 V, IP 65 Operating pressure: 6-8 bar Isdpszrglzefx Acietl