Used Chambon Shaping Machine for sale (65,534)

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 Godpfou Uu S Tox Al Ssbu table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Godpfxoyw Hxns Al Sjbu Diameter: 1250 mm Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: excellent (used), Four-Sided Planer/Moulder Gabbiani GS120 Working width: 120 mm Gjdpfjyilk Ajx Al Ssbu Working height: 80 mm Number of spindles: 6 Spindle arrangement: Bottom Left Right Top Bottom Top Crawler feed The machine is suitable for dry and wet wood as well as for short workpieces.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Gedpfx Aszuxn Tjl Sebu For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ Gedpfx Aot Hww Dol Sjbu External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Gbjdpfxjv Ehbbj Al Ssu Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW Gbedpfozq Hmcex Al Seu weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm slot width: 50 mm feed speed: 10 m/min. adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Lubrication takes place via the drawing needles. Equipment: 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo Gbodpfx Asu Ng T Uel Sju i.D. *

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg Gsdet Hwruspfx Al Ssbu dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: used, Year of construction: 1999, functionality: fully functional, spindle diameter: 40 mm, total width: 1,800 mm, total height: 1,890 mm, total length: 4,200 mm, overall weight: 3,200 kg, spindle speed (max.): 6,000 rpm, type of input current: three-phase, input voltage: 400 V, number of spindles: 6, Weinig Profimat 23E four-sided planer Gbjdszvgbwopfx Al Sju Working width: 230mm Working height: 120mm Number of spindles: 6 Bottom: 7.5kW Right: 7.5kW Left Top: 7.5kW Bottom: 11kW Universal: 5.5kW Spindle diameter: 40mm Working speed: 24m/min Pneumatic pressure pads for feed rollers Electric adjustment of the pressure bar Length of the infeed table: 1970mm Table lubrication system Year of manufacture: 1999 Machine dimensions: 420x180x189cmH Machine weight: 3200kg

Condition: used, functionality: fully functional, Weinig Unimat 300 four-sided planer Working width: 230 mm Working height: 120 mm Number of spindles: 5 Spindle arrangement: 1. Bottom: 5.5 kW 2. Left 3. Right: 11 kW 4. Top: 5.5 kW Gsdpfezxzmgex Al Ssbu 5. Bottom: 4 kW Feed speed adjustable via inverter up to 12 m/min Pneumatic pressure pads

Condition: like new (used), max. wheel diameter 420 mm gear width 120 mm max. module 8 min. module 0,5 control BWO CNC no. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate Godpfstycgfox Al Sebu automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC x-travel 360 mm z-travel 154 mm L-travel 137 mm max. table load 1000 kg Control system Total power requirement 50 kW Machine weight approx. 8400 tonnes Space requirement approx. 5.3 x 3.9 x 3.5 m o Straight guide o Machine elevation 200 mm o With automatic workpiece clamping device o Counter holder Year of construction: approx. 1989

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Gedpfx Aertrvysl Sobu Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, Gjdpexz Dqgjfx Al Sjbu toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Gsdpfxszz Hg Re Al Sebu Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Gedpfx Ajz Ek S Asl Sebu Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, NEXUS: Trusted by Professionals Proven Performance in Contour Edge Banding A proven contour edge banding machine designed for easy operation by users of all experience levels. Continuously improved through real customer feedback, NEXUS incorporates innovative features that significantly increase the speed and efficiency of your production process. Gbjdpfxozphlwe Al Sju Key innovations include a 3D laser scanning system that accurately copies the panel contour and measures the required edge band length with millimetric precision, a chassis-integrated edge band roll feeding table, and convenient automatic or manual operating modes selected through the touchscreen control panel.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Working Area Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Centre distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speeds: 0.03 – 50 rpm Shaper Spindle Strokes (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder interface: HSK 80 B Tool and Workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control system: SINUMERIK 840 D MACHINE DETAILS Gbodewyn Amepfx Al Sju Electrical Data Drive power: 7.5 kW Total connected load: 30 kVA Weight and Dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter holder with 4 positions Automatic workpiece changer Linear workpiece conveyor

Condition: excellent (used), functionality: fully functional, Weinig Powermat 1000 four-sided planer Working width: 230 mm Working height: 160 mm Number of spindles: 8 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW (power lock) Left: 5.5 kW Right: 5.5 kW (power lock) Top: 11 kW (power lock) Bottom: 15 kW Top: 7.5 kW (power lock) Bottom: 7.5 kW All spindles: 8000 rpm Feed speed adjustable via frequency inverter up to 30 m/min Electromotive positioning of working height and width Weinig power com system Gedpfxjzt I Sfo Al Sjbu Pneumatic material clamping 2 smooth rollers in the working table Working table length: 1970 mm Drive on cardan shafts

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Gbjdpfx Aljyaywhe Ssu Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 0440298, table bore: 120 mm, table diameter: 500 mm, overall weight: 5,200 kg, gear diameter: 500 mm, TECHNICAL DETAILS Wheel diameter: 500 mm Minimum wheel diameter: 50 mm Maximum external ring diameter of processed gear with internal gearing: 800 mm Maximum distance from shaping axis to table axis: 355 mm Minimum distance from shaping axis to table axis: 0 mm Maximum number of teeth of processed gear: 300 Minimum number of teeth of processed gear: 12 Smallest module: 1.5 Largest module: 8 Table diameter: 500 mm Table bore: 120 mm Bore depth: 650 mm Gedpfxsyx U T Ao Al Ssbu MACHINE DETAILS Weight: 5,200 kg

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min Gbedpfxetycg So Al Sju feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: used, functionality: fully functional, Weinig Unimat 22A four-sided planer Working width: 220 mm Working height: 120 mm Number of spindles: 7 Spindle arrangement: Bottom: 4 kW Right: 4 kW Left: 5.5 kW Right: 7.5 kW Godpoy U Du Ujfx Al Sobu Top: 7.5 kW Bottom: 4 kW Universal: 5.5 kW Feed speed adjustable up to 36 m/min Option to purchase the machine without the enclosure

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN Gsdpfx Alsw Rf S Eo Sjbu weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, Godpfxsq R Tnzo Al Sobu swarf auger.