Used Charmilles Technologies Robofil 510 for sale (26,351)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: fridge, AGIECHARMILLES CUT 30 WIRE EDM MACHINE, YEAR OF MANUFACTURE 2011 TRAVEL: X 600, Y 400, Z 350, U/V ±50 MM MAXIMUM TAPER: 25°/80 MM AUTOMATIC THREADING AND RE-THREADING Nwedpfxoy Tw Tbs Akcsi RE-THREADING HEIGHT: 350 MM WIRE SPOOLS UP TO 25 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS COOLING UNIT TEST CUT POSSIBILITY

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM Nedoy Twkaspfx Akcjwi MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 Nwsdpfsy Twg Ujx Akcoi FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM MAXIMUM TAPER 30°/220 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING Nwedpfx Akey Twf Rjcsi RE-THREADING HEIGHT 220 MM WIRE SPOOLS UP TO 8 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: used, machine/vehicle number: MY51260317, functionality: fully functional, Agilent Technologies CXA Signal Analyzer 9 kHz - 3 GHz incl. documentation and accessories Nwjdpfxjxr D Awj Akcji

Condition: refurbished (used), Year of construction: 2012, operating hours: 2,134 h, Hako Scrubmaster B45 TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and new DGUV V3 electrical inspection with test certificate. Working width without suction bar: 51 cm Working width with suction bar: 86 cm Max. area performance: 2000 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / repairs carried out: - Suction motor 24V 400W new - 2 x 12V 85Ah GEL batteries new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses new Nwodpfx Aju Sr U Njkcji - Disc brushes new - Support wheels new - Squeegee blades new - Fresh water filter new Additionally, we offer: Servicing, repair, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, input voltage: 24 V, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar Nwedpfx Aksyanpfjcoi - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) In addition, we offer: Service, repair, and sales for all common Hako models.

Year of construction: 2016, condition: ready for operation (used), Life Technologies Amex 1000 Evos XL Core Digital Microscope Magnifications: 4x, 10x, 20x Dimensions: approx. 410mm x 320mm (D x W) Nedpfxjyx A Sms Akcowi Height: approx. 550mm Year of manufacture: 2016 You are welcome to arrange a viewing. We can organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Sale subject to prior sale. Visit our shop to view more of our listings. The specified company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the item description may occur and are subject to change.

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Nwjdpfxeyit Ule Akcji

Year of construction: 2022, operating hours: 5,450 h, condition: ready for operation (used), functionality: fully functional, 3D printer, fully functional. Various additional nozzles included. Includes robust, powder-coated print bed from Prusa. The right extruder has barely been used. Overall condition is good. Printer is ready for collection at any time. Nwjdpfsyim Dkox Akcei Printer specifications (without warranty): The Raise3D Pro3 is a professional FFF dual-extruder 3D printer with a 300 x 300 x 300 mm build volume (255 x 300 x 300 mm in dual mode). It features an enclosed chamber, nozzle temperatures up to 300 °C, automatic bed leveling, and is designed for materials such as PLA, ABS, PETG, ASA, and TPU. Key technical data of the Raise3D Pro3: - Printing technology: FFF/FDM (Fused Filament Fabrication) - Print head: Dual extruder with electronic lifting system (quick change) - Build volume (W x D x H): - Single: 300 × 300 × 300 mm - Dual: 255 × 300 × 300 mm - Device dimensions: 620 x 626 x 760 mm - Maximum temperature: - Nozzle: up to 300 °C - Print bed: up to 120 °C - Print speed: 30 to 150 mm/s (standard), HS version (Hyper Speed) up to 300 mm/s - Layer resolution: 0.01 mm – 0.25 mm (depending on nozzle) - Nozzle diameter: 0.4 mm (standard), optional 0.2, 0.6, 0.8, 1.0 mm - Filament diameter: 1.75 mm - User interface: 7-inch touchscreen (1024 x 600) - Connectivity: Wi-Fi, Ethernet - Slicer: ideaMaker - Features: Automatic bed leveling (9 points), print resume after power outage, air filter The Raise3D Pro3 is suitable for industrial applications, prototyping, and small-scale production. The Pro3 Plus is the variant with an extended Z-axis of 605 mm.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, table width: 320 mm, table length: 560 mm, TECHNICAL DETAILS X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 320 mm Nwodpfxjya Efwe Akcoi Maximum workpiece dimensions: 880 mm x 550 mm x 225 mm Table dimensions: 560 mm x 320 mm MACHINE DETAILS Control: Charmilles Weight: 3,500 kg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM Nwsdpfx Asyzz Irekcji • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: refurbished (used), Year of construction: 1998, operating hours: 20,800 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Machine currently undergoing revision at our facility in Semsales, Switzerland. Erowa ITS50 chuck. 16-position rotary tool changer, double gripper. Flat LCD screen. Retractable work tray. Inspection possible upon request. More details available on request. Nwjdpfjxlhudex Akcsi

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, input voltage: 240 V, type of input current: AC, Rudolph Technologies / Onto Innovation AXi 940 b Automatic Inline Wafer Inspection Tool Model: AXi940b Lamp Operating Hours: Nwjdowgm Eaepfx Akcoi

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,400 mm, total length: 1,000 mm, total height: 950 mm, overall weight: 195 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO 25" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 Njdpfehpuhtex Akcjwi 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Standart Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) "R-PRO" Optional Features - Ribbing Attachments (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Dijital Encoder (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Circular Saw (Optional) (R-Pro 25 Plus) - Manual Guillotine Shear (Optional) (R-Pro MAX) - Sliding Shear (Optional) (R-Pro DUO) Please contact us for more information and prices...

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! Nsdpfx Akoud H Dmecjwi As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 Njdjud N Hdepfx Akcewi ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication Njdpfx Asuggb Dokcswi  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m Nedow U N Ixspfx Akcowi ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Year of construction: 2014, condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg Nodpfx Aksyy Th Iecowi MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Year of construction: 2026, condition: new, ProfiStop Omicron is a heavy-duty solution for high-productivity cutting of heavy steel or timber. Run your heavy-materials production with precision and accuracy of a Swiss watch. • Fully automated servo motor cut lengths measuring • Simple to use high-accuracy heavy materials cutting • Heavy duty 120+ kg recommended material weight • Ideal for hardwood timber and structural steel • Automated and streamlined jobs management • Label printing and bar-code / QR jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 2 m, 4 m, 6 m, 8 m, 10 m, 12 m, 14 m. Highly suitable for: • Structural steel processing • Steel frames fabrication • Agricultural manufacture • Steel tube bending • Retail steel sales Can be used with all your existing saws including: • Band saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Omicron Length: 10 m Stroke: 9560 mm Pushing capacity: 120-400 kg Nsdef Dqp Espfx Akcewi Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Nwedpsx I Akuefx Akcsi Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: good (used), Year of construction: 2000, Description table length 560 mm table width 400 mm amperage axis travel (X, Y, Z): 320, 220, 320 mm C axis 360° dielectric 290 l table load 300 kg voltage 400 V machine weight approx. 1950 kg approx. machine dimensions 1.65 x 1.60 x 2.45 m Net prices open to reasonable negotiation Dwebiexbm Ubja A Hkmeb 1. Bench drill Nwedpsxbm Uuofx Akcsi 2. Jungner grinder 3. SPC 20 grinder 4. Marking plate (table) 800x500 5. Maho 800 6. 2D dividing head Ø 300 7. 3D dividing head Ø 300 8. Tesa 700 height gauge 9. *Charmilles 200 sinker EDM 10. Charmilles Drill 11 sinker EDM 11. Metal band saw

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE Nedpfxju Hl R Tj Akcowi center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Njdpewy Uu Asfx Akcswi