Used Compressed Air Tank 11Bar 1000L for sale (33,241)

Condition: new, Kaeser membrane dryer KMM 5 Volume flow with pressure dew point reduction +35 °C -> +3 °C 0.68 m³/min Volume flow with pressure dew point reduction +35 °C -> -20 °C 0.4 m³/min Volume flow with pressure dew point reduction +5 °C -> -20 °C 0.67 m³/min Purge air 0.1 m³/min Compressed air connection R ¾ Min. overpressure 4 bar Max. Overpressure 14 bar Compressed air inlet temperature min. +1° C Compressed air inlet temperature max. +66° C Width 133 mm Iodpfxsvkf Aas Acfjti Depth 133 mm Height 634 mm Mass 5.9 kg Purge air stop valve Yes Membrane fiber in helix structure Yes Outlet silencer Yes Membrane flow from inside to outside Yes From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: used, Year of construction: 2013, Compressed air refrigeration dryer Model: MG 110 Year of construction: 2013 Air volume flow 6,600 m³/h or 110.0 m³/min Ijdpfou Rn Trox Acfjti Nominal power: 8.99 kW The air dryer is functional and was regularly serviced and checked until it was decommissioned

Condition: used, Year of construction: 2004, Manufacturer: Pyrazol Ijdpfsuf Rxdsx Acfjti year of manufacture: 2004 operating temperature +10- +50 C total diameter: 1500mm height: 21000mm connection: 4x 200mm flanged 2x 3.4 inch + cleaning opening weight: empty 500 kg

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation Iedjh U Dtuopfx Acfeti - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Itjdpfx Aswypqrocfoi Weight: approx. 150 kg In good condition

Condition: used, Screw compressor, KAESER, type BS 50 Manufacturer's serial number: 402852, year of manufacture: 1990 Volumetric flow rate: 5 m³/min. Pressure: 7.5 bar Main motor power: 30 kW Mains connection: 400 volts, 50 Hz Connection thread: 1 1/2" - Operating hours recorded: 1107.90 - Load hours recorded: 749.00 - Soundproofed Space requirements (L x W x H): 1600 x 1070 x 1350 mm Iedjiyu Ifepfx Acfeti Weight: 900 kg Very good condition Previously used as a reserve compressor and has only a few operating hours.

Condition: used, Filter assembly, COMPAIR filter unit for compressor systems Compressed air filter Type: CF 0087B ZP Iedpfx Acohalvdsfjti Manufacturer's number: 3363006 / 05 / 005 Operating pressure: max. 16 bar Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Filter element number: CE 0087B - Filter housing made of aluminum Weight: 5 kg Dimensions L x W x H: 125 x 110 x 420 mm Good condition

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6721-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Filling Tank – 1.4435 – Double Jacketed – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial No.: 1003453 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling tank / process vessel Nominal volume: 1,000 liters Total volume: 1,400 liters Empty weight: 762 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) CE Marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design according to AD 2000 code Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV acceptance including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent full FAT testing and approval at the manufacturer’s site. Tests carried out include: • Pressure test in accordance with PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Internal roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Verification of markings • Complete documentation review FAT protocols fully available. DESIGN FEATURES • Cylindrical, horizontal tank • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade weld seams • Manhole DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator port (DN 200) • Multiple spare ports • Heavy-duty trunnion/pivot bearing • Transport and lifting devices DOCUMENTATION – fully complete and well structured Comprehensive, project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design test and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates for pressure gauges • Reports and EU conformity of installed components • Parts list assembly • Component drawings • Operating and maintenance manuals Complete digital documentation portfolio available. CONDITION • Never used in production • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharma-manufacturing with complete PED Module G individual acceptance by TÜV SÜD, CE 0036 marking, and full FAT test documentation. Not a standard tank, but a quality project vessel with comprehensive GMP-compliant documentation. Ijdpfsykpqrex Acfeti Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6723-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Net weight: approx. 610–762 kg Product contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate no.: Z-EU-SI-LJU-20-05-2702107-19125214 Inspection report no.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection in accordance with PED Annex I No. 3.2 carried out Pressure test in accordance with Annex I No. 3.2.2 carried out Acceptance without deviations Permissible load cycle count: 10,000 cycles (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Complete works FAT carried out: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional inspection • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation review FAT fully documented. DESIGN • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manhole DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • For pressurised and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Complete structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welders’ lists • NDT reports • Surface roughness protocols • Internal pressure test • Measurement reports • Calibration certificates • Parts list and drawings Isdpfxeykqmzj Acfjti • Operating and maintenance manuals Digital documentation folder available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP installations • Biotechnology High-quality BRINOX pharmaceutical specification with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – tested project quality. Immediately available.

Condition: excellent (used), Year of construction: 2011, PROD. KAESER TYPE DC108E S/N 9.5487.00010 1198 YEAR 2011 POWER (kW) CAPACITY (m3/min) 10.93 PRESSURE (bar) 5 / 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) Itodjy T Ng Tepfx Acfoi ON TANK DOCUMENTS CONNECTION 2 NEW/USED USED

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" Iedpfeyif I Uox Acfoti - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS YES Itjdey Twahspfx Acfei CONNECTION NEW/USED USED

Condition: good (used), Year of construction: 2013, functionality: fully functional, volume flow: 0.85 m³/h, total width: 630 mm, total length: 484 mm, total height: 779 mm, overall weight: 80 kg, pressure dew point: 3 °C, input voltage: 230 V, ambient temperature (max.): 43 °C, ambient temperature (min.): 3 °C, type of cooling: air, power: 0.29 kW (0.39 HP), input frequency: 50 Hz, Equipment: type plate available, KAESER Refrigeration Dryer SECOTEC TA 8 – Year of Manufacture 2013 – Recently Serviced For sale is a reliable refrigeration dryer TA 8, ideal for compressed air treatment in workshops or industrial settings. The dryer was manufactured in 2013 and has recently undergone a complete service by a KAESER partner – technically flawless and immediately ready for operation. Technical Data: Isdsy H Amyjpfx Acfjti * Volume flow: 0.85 m³/min * Pressure dew point: +3 °C * Operating pressure range: 3 – 16 bar * Pressure drop: 0.14 bar * Refrigerant: R134a * Connection: G 3/4 * Power supply: 230 V / 1 phase / 50 Hz * Ambient temperature: +3 °C to +43 °C * Dimensions (W x D x H): 630 x 484 x 779 mm * Weight: approx. 80 kg Energy consumption: * 0.27 kW at 100% load * 0.15 kW at 50% load * 0.04 kW at 10% load Condition: Used, well-maintained, fully operational – in very good condition thanks to recent servicing. The price includes VAT, and VAT is itemised. Inspection by appointment possible. If interested, please get in touch!

Condition: used, Year of construction: 2008, Air consumption 42,83 m³/min Motor output 250 kW Itedpfx Acevx Uvlofoi Overall size 4000 x 2100 x 2500 mm 0 min. 4 bar 0 max. 13,5 bar Weight 20.000 kg Dimensions (LxWxH) 13,00 x 2,95 x 2,90 m The pneumatic container is used to provide oil-free dry Compressed air (42 m³/min max. 7.5 bar) for test facilities and consists of a self-contained container functional unit, in which the following Machines, as shown schematically in Figure 2, were integrated: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - Activated carbon adsorber BEKO Clearpoint L 3400 V - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 - El. Steam trap BEKO 14

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Isdpfexf Uukjx Acfsti Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: used, Compressed air adsorption dryer, activated carbon adsorber with post-filter BOGE type DAZ 5-2 For particularly dry air Manufacturer no. 38315449 Year of manufacture 2013 Volume flow max. 250 liters/min. = 15 m³/h Ijdsvrkhkjpfx Acfsti Operating pressure max. 16 bar Connection thread G 1/4“ Mains connection 230 volts, 50 Hz - Pre- and post-filter Space requirement L x W x H 400 x 210 x 580 mm Weight 15 kg good condition

Condition: used, Year of construction: 2020, machine/vehicle number: 525, powerful vacuum cleaner for dusts, smoke, chips suction power 7.58 m³ / min vacuum 520 mbar air demand 3.25 m³ / min suction nozzle NW 76 mm suction hose 5.5 m collection container 60 litres HEPA safety filter cartridge 2.2 m² - dust class H space requirements length - 1,100 x width - 680 x height - 2,200 mm weight approx. 130 kg Itsdpfx Aep Sczbscfsi

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 Iodpfx Acox Sx U Djfeti 30.60 m³/min Year of manufacture: 2016

Condition: ready for operation (used), Year of construction: 1995, Used compressed air refrigeration dryer. Before being decommissioned, the refrigeration dryer was checked for functionality by a refrigeration technician. Subsequently, 18 kg of R22 refrigerant (2 bottles) were extracted and disposed of. All records are available. Afterward, a small amount of nitrogen was added. We can gladly have the dryer refilled with new refrigerant (e.g., R407C) for you. !! The selling price does not include refrigerant !! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A Max. flow rate: 55 m³/min (3340 m³/h) Pressure drop at max. flow rate: 0.38 bar Refrigerant weight: 18 kg (currently without refrigerant) Max. pressure, refrigerant side: 16/25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch Iodpfxjfy Trhe Acfjti Max. pressure, compressed air side: 16 bar Max. flow rate Max. temperature: Compressed air: 60°C Power consumption with fans: 7.1 kW Voltage: 400 volts Dimensions (width/depth/height): 1880 mm / 1100 mm / 2000 mm Weight: 835 kg

Condition: excellent (used), Year of construction: 2002, For sale are 2 air cannons for silo discharge. Manufacturer: Martin Engineering Capacity: 50 liters Operating pressure: 8 bar Itjdpfeh A H Thex Acfsi Year of manufacture: 2002 1 piece Capacity: 25 liters Operating pressure: 10 bar Year of manufacture: 2011

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Iedpfxsw Dppvj Acfoti Cooling water connection: 2" Refrigerant: R407C Refrigerant charge: 24 kg Installed electrical power: 29 kW Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Height: 3650 mm Weight: 5600 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Itsdpfx Asr A El Eocfoi Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Year of construction: 2007, machine/vehicle number: 33340007007005, Bearing no. 19298 Technical data: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm Isdpfx Acor Ddw Usfeti - Weight approx. 280 kg

Condition: excellent (used), Year of construction: 2013, KAESER TH451 refrigerant dryer Itjdpjwqmf Uofx Acfsi capacity 40000 l/min,(40m3/min) year of manufacture 2013. net price: 19500 PLN gross price: 23985 PLN

Condition: excellent (used), Year of construction: 2010, KAESER TH451 REFRIGERANT DRYER 40m3/MIN KAESER TH451 REFRIGERANT DRYER capacity 40000 l/min,(40m3/min) Isdpfjv Ivrmox Acfsti year of manufacture 2010. net price: 19500 PLN gross price: 23985 PLN