Used Crown Esr1260 for sale (898)

Condition: used, mileage: 35,485 km, power: 315 kW (428.28 HP), axle configuration: 6x6, color: white, driver cabin: day cab, gearing type: automatic, total length: 79,150 mm, total width: 25,500 mm, total height: 38,800 mm, loading space length: 49,000 mm, loading space width: 23,800 mm, loading space height: 8,000 mm, Year of construction: 2017, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel at [phone number]. Mercedes-Benz Arocs 3343 AK 6x6 Three-Sided Tipper Kjdjz Dm Ukspfx Acpjdu A1C Front axle 7.5 t, A1W Differential lock, front axle, A1Y Front axle, straight design, A2G Rear axle, crown wheel 300, planetary gears, 13.4 t, A6C Axle ratio i = 4.833, B1B Electronic braking system with ABS and ASR, B1D Electronic compressed air supply unit, medium, B1F Heater, electronic compressed air supply unit, B1Z ABS, switchable, B2B Drum brake, on front and rear axles, B4A Condensate monitoring, for compressed air system, B4M Compressed air tank, steel, B5B Trailer brake, 2-line, C0B Frame overhang 800 mm, C1R Wheelbase 3600 mm, C5J Fastening parts, for tipper body, C5P Frame bolted, C6C Steering, single-circuit, C6J Steering power pump, unregulated, C6Q Stabilizer, front axle, C7C Rear outriggers, foldable, steel tipper body, proof load 80%, C7J Battery carrier, batteries side by side, C8E Half-shell fenders, for complete tipper, D0S Compressed air connection, in the cab, D1B Driver's air-suspended seat, standard, D1P Co-driver's air-suspended seat, comfort, D1Z Middle seat, with 3-point seatbelt, D2N Seat back release, driver's seat, D3Q Seat cover, velour, D6F Air conditioning, D6I Waste heat recovery, D6M Hot water auxiliary heater, cab, D6Z Construction site filter, D7G Storage compartment lid, driver and co-driver side, D8A Roof hatch/ventilation flap, roof, E0D Battery sensor, Hella, E1B Batteries 2 x 12 V/170 Ah, low maintenance, E1N Generator 28 V/100 A, E3A Voltage converter 24 V/12 V, 10 A, E3B Connection point 12 V/15 A, for additional consumers, E3E Additional socket 12 V/15 A, co-driver footwell, E3L Socket 24 V/15 A, co-driver footwell, E5A Switch No. 1 for external bodywork electrical system, E5H Switch for night running lights, E6A Trailer socket 24 V, 15-pole, E6E Adapter, 15-pole to 2x7-pole socket, F0G Side module, N3G Vehicle, F0Y Mirror housing, construction vehicle, F1O M cab ClassicSpace, 2.30 m, tunnel 320 mm, F3A Cab mounting, standard, steel-sprung, F3W Cab tilting mechanism, mechanical-hydraulic, F4I Rear cab wall, with window, F4X Storage compartment exterior flap, left, F5Y A-pillar trim, F6E Windshield tinted, with band filter, heated, F6I Front mirror, heated, F7B Bumper, corners made of steel, F7D Bumper, center part, towing eyelets, coupling jaw, F7Y Cab entry left/right, movable, F7Z Step, with handrail on the roof, F8E Locking system, with central locking, F8F Comfort locking system, G0A Drivetrain, 44 t to 68 t, G0W Off-road driving program, G2F Transmission G 330-12/11.63-0.77, G4E Transfer gearbox VG 3000-3W, 1.04 switchable, G5A Single-plate clutch, G5G Mercedes PowerShift 3, I1I Tires tubeless, 13 R 22.5 front/front steering/rear steering, I1J Tires tubeless, 13 R 22.5 rear axle, I4J Wheel arrangement 6x6, I5H 33.0-tonner, I6I Vehicle production plant Wörth, I6W Leaf spring suspension, rear axle, J1A Instrument cluster, 10.4 cm, J1R Tachograph digital, EC, speed, ADR, J1S Tachograph manufacturer VDO, J2A CD radio, J2K Speakers, 2-way system, J9A Pre-installation CB radio, 12 V, DIN slot, J9D Pre-installation for toll collection, JETC Battery disconnect switch, electronic, switch in cab and on chassis, JQ8F Hand lever, top, for trailer coupling, JQBF Hook coupling Ringfeder, K4D, ECE R-55, K3V AdBlue tank 60 l, left, K5A Tank 290 l, left, 650 x 565 x 950 mm, steel, K5S Protection cap for AdBlue dosing system, K7D Exhaust system, tailpipe to the right o

Condition: used, mileage: 499,885 km, power: 175 kW (237.93 HP), first registration: 02/2016, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,240 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * German vehicle, first owner, good condition * WDB96702610026362 * Air suspension, rear axle * Automatic transmission * Differential lock * Air conditioning * Auxiliary heater * Comfort seat * Tires 285/70 R 19.5 * Cruise control Kdedpfjz Nb D Dsx Acpju * Enhanced engine brake * Tail lift, 1,500 kg * Sliding tarpaulin, right and left, side boards * 13,500 kg gross vehicle weight, 6,520 kg payload * WhatsApp: * Polish contact: Special equipment: Trailer brake with 2 lines, trailer coupling: center axle trailer G 145, trailer socket 24V / 15-pin, audio system: CD radio (Bluetooth), battery 165 Ah, differential lock, rear axle, compressed air unit, medium, electric windows, generator 100 A, fuel tank: 180 L, plastic, LED lighting package, vehicle outline lights LED, side turn signals, white, roof air deflector (lockable), enhanced engine brake, frame overhang - extension, reversing warning system, acoustic (external warning signal), switch for tail lift, end crossmember for trailer coupling (center axle trailer), seats in cab: driver's seat armrest, seats in cab: driver's seat, comfort suspension seat, sun visor, exterior, underbody guard, side, preparation for toll collection, preparation for multimedia devices, auxiliary heater (air) Additional equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 5.3 t, approach/front mirrors, exhaust pipe to the center of the vehicle, exterior mirrors, electrically adjustable, left, cockpit, classic, compressed air tank, steel, two-step entry, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf spring / air, suspension: front springs 5.1 t, transmission 6-speed - type: G 90-6, urea tank (AdBlue): 25 L, lifting roof, manual (steel), rear axle, crown wheel 390, info display 10.4 cm with additional display, body/structure: chassis, engine 7.7 L - 175 kW R6 diesel (OM 936), engine compartment encapsulation, wheelbase 4760 mm, disc brakes, front and rear axle, seat cover / upholstery: fabric, seats in cab: passenger single seat, fixed, splash guard, rear fender, stabilizer, rear axle, steel rims 7.50x19.5, steering, cab type, tachograph / EU control device, rear underbody guard, fixed, front underbody guard, immobilizer, permissible gross vehicle weight 13.50 t.

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Kdedpfxsxzf Dzs Acpju Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2016, machine/vehicle number: TAD174116002, Offer 26235 Technical data: - Working width: 4100 mm - Pressing force: 170 t - Distance between columns: 3600 mm - Overhang: 400 mm - Max. installation height: approx. 400 mm - Ram stroke: 225 mm - Working height: approx. 920 mm - Motor power: approx. 18 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 4800 x H 2750 x D 2300 mm - Weight: approx. 12500 kg - Includes: - Swivel arm – control panel with ESA control Kdsdpjzu Na Hjfx Acpeu - For 4 axes Y1 + Y2, X, Z - Motorized back gauge with motorized height adjustment - Crowning - Safety – light curtain - 4-way universal die + split ram tool 4000 mm - Pointed tool 4000 mm - Ram tool 3000 mm - V-die 3000 mm - Electric foot switch - Side-mounted adjustable support arms

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: - Bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 - Swing top sealer Manufacturer: Rico - Labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 - Laser printer for dating Manufacturer: Domino - Bottle collecting table Kjdpfxozu Rw To Acpjdu Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Features: Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine; Domino laser printer for dating; bottle collection table

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 17650001, functionality: fully functional, power: 34 kW (46.23 HP), pressing force: 250 t, stroke length: 400 mm, throat depth: 250 mm, working width: 3,100 mm, TECHNICAL DETAILS Number of axes: 8 Press force: 250 t Max. working width: 3,100 mm Frame spacing: 3,200 mm Overhang: 250 mm Rear gauge depth: 750 mm Kedpfjzk Dv Iex Acpodu Max. stroke: 400 mm MACHINE DETAILS Control system: Bystronic ByVision Power: 34.0 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,390 x 3,340 mm Weight: 20,500 kg Transport packages: 3 EQUIPMENT Crowning system: CNC-controlled Ram holder: Hydraulic Tool holder type: WILA standard Tools included Documentation CE marking and certificate Additional finger stop Stroke assistance Finger protection Offline software

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Press force: 225 t Bending length: 3050 mm Throat depth: 405 mm Table width: 140 mm Machine weight (approx.): 14,100 kg Space requirement (approx.): 4000x1900x3100 mm Accessories: - Control system upgrade in 2026 to Cybelec VisiTouch - 1 bending aid - Side protective doors - Laser safety system - Pneumatic tool holder EHT 26 mm - Crowning - Pneumatic die shifting Kjdpfxjzw Adqo Acpedu - Foot switch - Controlled axes: y1, y2, x, R, z1, z2

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 230 kg, machine/vehicle number: RR42ABH, SCHORR RR42ABH – Professional wood chipper for branches up to 100 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR42ABH is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 100 mm in diameter and impresses with its robust design, high pulling power, and easy operation. Using the 3-point linkage (Category 1 and 2), you can attach the RR42ABH to your tractor in just a few minutes. The height-adjustable support feet keep it securely in position during assembly and disassembly, and the matching PTO shaft is included. With a power requirement of 18 to 50 hp, it is also suitable for smaller tractors and compact tractors. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping result and a consistent material flow. The large feed hopper allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited in a targeted manner – whether in piles, trailers, or big bags. Advantages ✓ Compact 3-point mounted chipper for tractors from 18 to 50 hp ✓ Chips branches and brushwood up to 100 mm in diameter ✓ Extended feed hopper also handles bulky crown wood ✓ Robust knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ Height-adjustable support feet, quick 3-point mounting (Cat 1 & 2) ✓ PTO shaft included, ready for use in minutes ✓ Directly from the manufacturer, with spare parts stock & workshop service Technical data Manufacturer: SCHORR Model: RR42ABH Drive type: PTO, direct drive 3-point category: Cat 1 & 2 Max. branch diameter: 100 mm Chipping type: Drum, self-feeding Number of knives: 4 + 1 counter-knife Weight: 230 kg Overall length: 1070 mm Overall width: 830 mm Overall height: 1240 mm Discharge angle: 290° Recommended tractor power: 18-50 hp PTO speed: 540-1000 rpm The RR42ABH is designed for long-term use. All components are easily accessible, allowing maintenance work to be carried out quickly. Spare parts are available at any time from stock. Kedezh Hlgjpfx Acpjdu Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please contact us.

Year of construction: 1997, condition: used, Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes. Additional title: crown caps, aluminum screw caps Crown caps: 24000 pc/h Aluminium screw cap: 24000 pc/h Power: 1,7 kW Kodpfsztzbmex Acpsdu Voltage: 3 x 380 V Length: 1,3 m Width: 0,6 m Height: 1,1 m Weight: 70 kg Material: stainless steel Base construction: Rectangular storage container with lid, base made of square tube Features: level indicator Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

Condition: used, mileage: 689,750 km, power: 260 kW (353.50 HP), first registration: 11/2015, fuel type: diesel, empty load weight: 10,370 kg, maximum load weight: 7,630 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,500 mm, next inspection (TÜV): 11/2026, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 7,520 mm, loading space width: 2,460 mm, loading space height: 2,460 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, tail-lift, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, short cab, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, differential lock, fog lights, toolbox, leaf-air suspension, trailer hitch with air and electrical connections, aluminum tank, doors, lashing rails, underbody protection, side aluminum fender, roof hatch, aluminum loading platform, fixed, diesel/electric refrigeration unit, green environmental badge. Wheelbase: 5500 mm, Body: Meyer refrigerated box with a double-deck configuration, refrigeration unit Thermo-King T800R & 2t Dautel loading platform DLB 2000 S 8t, front axle, rear axle hypoid 13t, crown wheel 440, electronic braking system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, front axle stabilizer, front underrun protection made of aluminum, waste heat recovery, ClassicSpace, Power driving mode, comfort locking system, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, high-performance engine brake, ESP, lane keeping assist, attention assist, active brake assist, rear engine drive with hydraulic pump ISO 7653D. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Kdodozp H D Eepfx Acpeu

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, ERBEND D-SFA 4230 – CNC Folding Machine The ERBEND D-SFA 4230 is a powerful double-sided CNC folding machine for accurate and flexible sheet metal processing. This machine is offered on behalf of a customer and has less than 10 operating hours. It is in nearly new condition, fully functional and immediately available. The machine can be viewed under power and tested by appointment. Kdedpfxszwqwxe Acpju Main Features 4,200 mm bending length Double-sided folding: upwards and downwards ERFOLD 3D CNC control 2D/3D programming and simulation Motorized CNC axes U-shaped back gauge Pneumatic back gauge fingers Integrated vacuum cups for sheet positioning Segmented upper and lower tooling Pneumatic tool clamping CE certified Technical Specifications Model: ERBEND D-SFA 4230 Bending length: 4,200 mm Steel S235: max. 2.25 mm Stainless steel: max. 2.0 mm Aluminium: max. 3.0 mm Control: ERFOLD 3D CNC CNC axes: A, B and D axis Upper tool: 200 mm Crowning: Manual Machine weight: approx. 11,800 kg Double-Sided Folding The D-SFA technology allows the machine to fold both upwards and downwards, significantly reducing the need to turn or reposition the workpiece. Combined with the CNC-controlled back gauge, vacuum sheet positioning and ERFOLD 3D programming, this makes the machine particularly suitable for efficient production of large and complex sheet metal parts. Condition & Availability Less than 10 operating hours Nearly new condition Fully functional Immediately available Inspection and testing under power possible An excellent opportunity to acquire a nearly new ERBEND D-SFA 4230 without the delivery time of a new machine. Contact us for further information, pricing or to arrange a demonstration.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, oil tank capacity: 200 l, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH! DELIVERY AVAILABLE THROUGHOUT EUROPE – WE CAN ARRANGE TRANSPORT DIRECTLY TO YOUR DESTINATION AT AN ADDITIONAL COST. CNC PRESS BRAKE SPB 110T × 3200 – HACO 70S – 4+1 AXES The SPB 110T × 3200 is a professional electro-hydraulic CNC press brake with a bending force of 110 tons and a working length of 3200 mm. Designed for precise sheet-metal bending in both individual and series production. The electro-hydraulic servo synchronization system and linear scales monitoring the ram position provide high accuracy, stability and repeatability. The machine is equipped with high-quality hydraulic, electrical and drive components from recognized manufacturers. HACO 70S CNC CONTROL – 4+1 AXES • Y1/Y2 – independent control of the left and right sides of the ram • X – precise backgauge positioning • R – vertical adjustment of the backgauge fingers • V – automatic CNC table crowning compensation TECHNICAL DATA • Bending force: 1100 kN / 110 T • Working length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Controlled axes: Y1, Y2, X, R + V (4+1) • CNC controller: HACO 70S • Motor power: 8.5 kW • Fast approach speed: 180 mm/s • Bending speed: 13 mm/s • Return speed: 170 mm/s • Dimensions: 3850 × 1650 × 2680 mm PREMIUM COMPONENTS Kedpfsy D Nvisx Acpodu • CNC control system – HACO 70S • Servo motor and drive – INOVANCE / ESTUN • Main servo motor – INOVANCE / ESTUN • Main hydraulic valve – HACO + Rexroth • Hydraulic pump – Rexroth / HYTEK (USA SUNNY) • Hydraulic cylinders – HONGWEI / WUYANG • Backgauge ball screw – TAIWAN • Linear guides – TAIWAN • Hydraulic fittings – Germany EMB • Cylinder seals – Japan NOK • Linear scales – HACO • Main electrical components – Schneider • Laser safety protection – Italy DSP • Rear safety light curtain – LNTECH • Push-button quick tool clamping system • Foot pedal control ACCURACY • Ram positioning repeatability: ±0.01 mm • Ram positioning accuracy: ±0.02 mm • Backgauge repeatability: ±0.02 mm • Bending straightness: 0.3 mm / 1 m • Bending angle accuracy: ±1–1.5° • Linear scale resolution: 0.005 mm EQUIPMENT • Electro-hydraulic servo synchronization system • CNC automatic table crowning compensation • Backgauge with linear guides and ball screw • Adjustable front material supports • Quick tool clamping system • V8–V12 tooling set The upper tool is segmented into 835 mm sections, with one section additionally divided into shorter segments, providing greater flexibility when bending complex workpieces. The SPB 110T × 3200 combines advanced 4+1-axis CNC control, high positioning accuracy and quality components from recognized manufacturers, providing efficient, precise and repeatable performance for professional sheet-metal fabrication. European delivery can be arranged directly to the customer's destination at an additional cost. Please contact us with your delivery address for an individual transport quotation.

Condition: used, mileage: 41,863 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: silver, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 4,000 mm, loading space volume: 33 m³, loading space length: 6,370 mm, loading space width: 2,627 mm, loading space height: 1,948 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, 1. Cab & Interior* * Cab: ClassicSpace, 2.30 m, tunnel 320 mm * Cab width: 2.30 m * Cab: 600 mm roof height * ClassicSpace interior * Driver's air-suspended comfort seat * Co-driver's functional seat * Seat upholstery: velour (driver + co-driver + center seat) * Side roller blinds (driver & co-driver) * Air conditioning * Roof hatch / ventilation flap * Storage compartment lids on driver and co-driver sides * A-pillar trim * Tinted windshield * Interior color: Greige/Anthracite * Smoker's package * Compressed air connection in the cab * Combination instrument: 10.4 cm * Classic Cockpit * Radio with USB & Bluetooth * Standard speakers * Central locking ---- 2. Engine & Drivetrain* * Engine: OM471, R6, 12.8 l, 350 kW (476 hp), 2300 Nm * Euro V export version * OM471 generation * Engine brake: standard system * Twin-plate clutch * Transmission: G 280-16/11.7-0.69 * Mercedes PowerShift 3 * Transfer case: VG 2800-3W, permanent * Axle ratio: i = 5.333 * Reinforced engine mounts * Air compressor: 2-cylinder * Insect screen in front of the cooling system * Underride guard under the front bumper * Air intake behind the cab, mounted * Additional fuel pre-filter * Transmission oil cooler * Engine PTO at the rear, hydraulic pump ISO 7653D * Auxiliary PTO ---- 3. Chassis, Axles & Frame* * 8x8/4 all-wheel drive * Front axle: 9 t, straight version * Rear axles: 16 t, crown wheel 300, planetary gears * Front suspension: 2 x 9 t, 4 leaves * 2nd axle: steered * Rear suspension: 2 x 16 t * Stabilizer bar on front axle * Stabilizer bar under frame at the rear * High-strength frame, U-profile, hole grid 50x50 mm * Frame overhang: 800 mm * Wheelbase: 4850 mm * Fender for chassis transport * Rear underrun protection omitted (ECE) * Central lubrication system ---- 4. Brakes & Safety* * Drum brakes front & rear * Electronic Braking System (EBS) 4th generation * ABS switchable * Parking brake: electronic * Reversing warning * Speed limiter: 80 km/h * Cruise control ---- 5. Electrical System & Electronics * Batteries: 2 x 12 V / 170 Ah (Exide) * 12 V / 15 A connection socket * 24 V / 15 A socket in the co-driver's footwell * Truck Data Center 7 (FB Card) * Pre-installation for FleetBoard Manager App * PSM 2nd generation ---- 6. Tanks & Fluids* * Main tank: 330 l aluminum, left * AdBlue tank: 25 l * Tank cross-section: wide + low ---- 7. Tires & Rims* * Front axles: 385/65 R22.5 on 11.75 x 22.5 steep-shoulder rims * Rear axles: 315/80 R22.5 on 9.00 x 22.5 reinforced rims * 2 wheel chocks ---- 8. Exterior & Body* * Bumper: steel (corners) Kdedpfx Aeym Iydscpju * Bumper: center part with towing eyes & coupling device * Cab entry: movable on left/right * Mirror housing: construction vehicle * Sun visor: transparent * Exterior storage compartment flap: left * Construction site filter * Mounting parts for tipper body * Clearance for control unit between driver's seat & door pocket ---- * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 13R22.5 * Fuel tank: 330 l * AdBlue tank: 25 l * Technical gross weight: 48000 kg * Curb weight: 12632 kg * Overall length: * Wheelbase: 4850 mm ---- Currently, we have 3 units in stock. Vehicle number: 11836, 11835, 11837---- Errors and prior sale reserved---- Advertisements and various lettering have been digitally removed.----- We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following ser

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift Kdedpfxsd Ih S Uo Acpou hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 63320 € 1196.75 € 100 to 2550 mm Y1 / Y2 / X Achse 265 mm 2200 mm 450 mm 530 mm hydraulisch 180 mm/s 10 mm/s 120 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 100 l 11 kW 3800 mm 1670 mm 2850 mm 7800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) Kdodpfowiqmgex Acpsu CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 88113 € 1665.34 € 220 to 3050 mm Y1 / Y2 / X Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 140 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 22 kW 4250 mm 1770 mm 3000 mm 12600 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table Kjdpfxowiquds Acpodu upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... OPTIONAL EQUIPMENT: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Hydraulic or pneumatic tool clamping for Euro or Wila tools

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 63600 € 1202.04 € 3200 mm 2 mm 1.2 mm 3 mm Motorisch 4450 mm 2200 mm 1900 mm 4500 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length Kdedjwiq A Iepfx Acpju - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 202100 € 3869.08 € 320 to 6050 mm Y1 / Y2 / X und R Achse 365 mm 5100 mm 450 mm 630 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm Kedpfx Aowirgnocpjdu 500 mm/s 250 mm 1100 mm 154 mm 160 l 7500 mm 1910 mm 3350 mm 29000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, Year of construction: 2026, neu 2026 080186 prompt, Zwischenverkauf v Türkei 81476 € 1309.77 € 1 69300 € 135 to 3050 mm Y1 / Y2 / X und RAchse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s Ksdpfx Aewirtnecpjdu 120 mm/s 500 mm 500 mm/s 350 mm/s 250 mm 900 mm 150 l 15 kW 4250 mm 1700 mm 2850 mm 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010/A /75°/0.8/105, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 100920 € 1907.39 € 220 to 4050 mm Y1 / Y2 / X Achse 265 mm 3600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 22 kW 5250 mm 1770 mm 3000 mm 14750 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... Kjdpfswirwgex Acpjdu optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, neu ca. 4-6 Monate ab Auftrag Türkei 231900 € 400 to 6050 mm Y1 / Y2 / X und R Achse 365 mm 5100 mm 510 mm 630 mm hydraulisch 150 mm/s 9 mm/s 150 mm/s 750 mm 160 l 7500 mm 2110 mm 3810 mm 34600 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table Kjdpewir Avofx Acpsdu upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 187100 € 3536.19 € 400 to 4050 mm Y1 / Y2 / X und R Achse 365 mm 3400 mm 410 mm 630 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 2 x 11 kW 5750 mm 2110 mm 3450 mm 27780 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 Kjdpfewir A Ajx Acpjdu - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: used, mileage: 769,300 km, power: 290 kW (394.29 HP), first registration: 06/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 1840 ANTOS - Leaf/Air - M Classic Space - Air Conditioning - Retarder - Good Condition * Chassis Number: WDB96340310XXXXX - First Owner - German Vehicle - * Diesel - Displacement: 10,677 cc - 290 kW / 400 hp - Euro 6 - Green Sticker - * Tire Sizes: Front Axle: 315/70 R 22.5 Rear Axle: 315/70 R 22.5 * Vehicle immediately available and ready for pickup - * Please arrange an appointment to view the vehicle - * Contact Person: Mr. Andreas Vogel Kdjdpfxexgldfj Acpou * The information provided online is non-binding. * It does not represent guaranteed properties. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors, and prior sale. Special features: Work lights, audio system: CD radio, exhaust facing down to the right, 220 Ah battery, compressed air connection in the cab, aluminum compressed air tank, additional compressed air tank, electrical preparation in the cab 24V/100A, driver assistance system: Attention Assist (drowsiness detection sensor), cab: steel suspension, comfort, 10.4 cm info display with additional display, integral rear, communication interface, front engine PTO with Frigoblock preparation, reinforced engine brake, configurable special module, retarder, fifth wheel coupling, low-maintenance, automatic circuit breaker, seats in the cab: driver's seat with comfort suspension, voltage converter 24V/12V 10A, additional 24V socket in the passenger footwell, preparation/switch for lifting axle on the semi-trailer/trailer, CB radio preparation, additional heating (water), transmission oil cooler Further features: EURO 6 emissions standard, axle configuration: 4x2, axle load front axle 7.5 t, trailer socket 24V / 15-pin, Antos, exterior mirrors electric. adjustable and heated, rear axle differential lock, medium compressed air unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane departure warning, driver's cab: width 2.30 m, driver's cab: hydraulic tilting system, driver's cab: M ClassicSpace, driver's cab: reinforced (Sweden), driver's cab floor with engine tunnel 320 mm, suspension: leaf/air, suspension: aluminum front spring bracket, suspension: 7.5 t front springs, 2 leaves, electric windows, tinted windshield, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 L, manual lifting roof (steel), rear axle crown gear 440, body/structure: semitrailer tractor, comfort locking system, 3-part fender, fuel tank: 390 L aluminum, unregulated power steering pump, air intake from the front, engine 10.7 Ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, splash guard front, stabilizer front axle, 24V driver's cab socket, tachograph / EC control device, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for toll collection, front axle offset, water pump regulated, permissible total weight 18.00 t

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm Kdodpfx Acovgc R Hopsu automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Condition: used, mileage: 94,112 km, power: 375 kW (509.86 HP), first registration: 07/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,400 mm, loading space height: 800 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Special equipment: Dautel steel 3-way tipper type DK3 * Foldable underrun protection * Trailer hydraulics * Automatic air conditioning * Auxiliary heating * Cool box * Navigation system * Reinforced clutch (two-disk clutch) * Tires Continental M+S 385/65R22.5 * Front axle 9/9 mm * Tires rear axle 315/80R22.5 * Rear axle 1 11/11 and 11/11 mm * Rear axle 2 11/11 and 11/11 mm * CB radio Kdjdpov A A E Nsfx Acpju * Storage above windscreen with cover, * Storage net on rear wall, * Front axle 8.0 t, * Trailer brake 2-line, * Audio system: Digital radio DAB / DAB+, * Step with handrail on roof, * Battery 220 Ah (AGM), * Air horn, * Electric. Pre-installation in the driver's cab 24V / 100 A, * Driver's cab: steel suspension, comfort, * Suspension: rear springs 2x13.0 t, * Suspension: front springs 8.0 t, 3 leaves, * Remote online remote query function, * Speed limiter system, * 12-speed gearbox - type: G 330-12, * Power Shift gearshift * LED rear lights, * Rear axle crown gear 300, * Automatic climate control, cool box / refrigerator, * Steering wheel with multifunction (leather), * Air intake behind the driver's cab, * Air filter: cyclone air filter, * Mercedes star, illuminated, * Rear engine output, * ISO pump, * Reinforced engine brake, * Reinforced engine compartment encapsulation, * Navigation system, * Parametrizable special module, * Frame overhang 800 mm, * Smoker's package, * Rain sensor, * Acoustic reversing alarm (external warning signal), * Rear window, * Fleet management system interface, * Headlight protective grille, * Circuit breaker, * Seat cover/upholstery: Passenger seat velour, * Seat cover/upholstery: Driver's seat fabric Dinamica, * Armrests on both sides of passenger seat, * Driver's seat air-conditioned suspension seat, * Driver's seat backrest foldable, * Sun visor outside, * Sun blind side window, driver's door, * Rear axle stabilizer, * Steel rims 11.75x22.5 (on front axle), * 12V/15 A socket in passenger footwell, * Additional 24V socket in passenger footwell, * Work light on top of rear wall, * Straight front axle, * Increased ground clearance, * Additional thermal insulation, * Additional heating (water), * Two-disk clutch Other equipment: * EURO 6 emissions standard, * ABS can be switched off, * Axle configuration: 6x4, * Heated approach/front mirror, * Trailer socket 24V / 15-pin, * Arocs 5 series, * Exhaust to the right, * Batteries arranged next to each other, * Multimedia cockpit, * Compressed air connection in the driver's cab, * Steel compressed air tank, * Compressed air unit with condensate monitoring, * Automatic switch-on for driving lights (light sensor), * Driver's cab: movable driver's cab entrance, * Driver's cab: hydraulic tilting device, * Driver's cab: M ClassicSpace, 2.30 m, tunnel 170 mm, * Suspension: leaf / leaf, * Electric windows, * Tinted windscreen, * (AdBlue): 60 ltr., * Manual lifting roof (steel), * Body/structure: Chassis for tipper, * Comfort locking system, * Fuel tank: 290 ltr. steel, left, * Power steering pump unregulated, * Steering oil cooling, * Air compressor 2-cyl., * Air dryer heated, * Engine 12.8 ltr. - 375 kW R6 diesel (OM 471), engine variant OM 471, * Auxiliary drive MB 131-2c, * Type of use: local transport, * Wheelbase variant 3600 mm, * Ramp mirror, * Residual heat utilization, * Disc brakes with full protection, * Disc brakes front and rear axle, * Protective plate under front bumper, * Side marker lights LED flashing, * Seats in the driver's cab: passenger function seat, * Stabilizer