Used Danfoss Vlt 5027, 175Z4131 for sale (193)

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg Chedsk Sgwaepfx Amhea refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Chedpfx Amjdzqn Dshsa Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm – Motor: 0.37 kW – three-phase 400V – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available Csdpfx Amsy Hdqashsha

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min Cjdpfey Dvpvsx Amhoha - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Chodpfjrz R Arsx Amhsa Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: used, Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 85-089, overall weight: 20,000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation based on a Reinartz AP15 press with a 55Kw motor driven via a DANFOSS VLT 5062 frequency controller and has a capacity of 1000 Kg rapeseed - 800 Kg sunflower seeds per hour, a crude oil stirring tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump as feed to an automatic AMA filter system consisting of a plate filter with 20 m2 filter surface and 2 fine filters, one with filter bag and one with filter candles up to 0.5 micron size of the impurities. The seed supply is done via a dosing screw with the possibility of heating the seed, the real entrance to the press is protected by a permanent magnet to catch iron impurities. The discharge of the rapeseed cake is done via a chain conveyor and conveyor belt. The entire installation is controlled via a SIEMENS Simatic Multi Panel touch screen control cabinet of approximately 1m wide / 2m high. This cabinet also contains a modem to forward error messages to various GSMs. The control can work in auto mode as well as in manual mode. In addition to these most important systems, the installation also contains the necessary additional silos for filling the main silo, which enables 24/7 operation. Chedpswl Afyjfx Amhoa The entire installation was built in 2006 and has produced 14,000 hours and is now completely ready for transport. If desired, the sale of individual elements can be discussed. If further information is required, this can best be done by email and preferably in Dutch, French or English.

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production Chodpfxszkv R Ds Amhja • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Year of construction: 2013, condition: used, NH3 refrigeration system for cooling glycol and brewing water, consisting of the following components: - NH3 separator brewing water 890 l (T0 = -0.5°C) - NH3 separator glycol 647 l (T0 = -6 °C) - 3 x piston compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water cooler Q0 = 200 kW - Evaporation condenser - Water tank approx. 470 hl - Glycol tank 80 hl + 2 x glycol pump - Plate heat exchanger as glycol cooler Q0 = 100 kW - High pressure collecting vessel 830 l - Danfoss frequency inverter type VLT HVAC Additional title: NH3 Cooling plant Cjdpfxoxbpame Amheha Cooling capacity Q0 brew water: 200 kW Cooling capacity Q0 glycol: 100 kW Evapotation temperature t0 brew water cooling: 0 °C Evaporation temperature t0 glycol cooling: -6 °C Current: 185 A / 250 A Features: 2 x NH3 separators (t0 = -0.5 °C; t0 = -6 °C); 3 x piston compressors; 2 x brewing water pumps; water cooler Q0 = 200 kW; evaporation condenser; water basin; high-pressure collection vessel; glycol tank + 2 x glycol pump; Glycol cooler Q0 = 100 kW; Danfoss frequency inverter type VLT HVAC

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) Cjdpfex Tdyzsx Amhoha • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Thanks to the wide performance range, these devices Cedpfxjtqt Uxo Amheha are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Cjdpfszqhxmsx Amhoha Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loading Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully enclosed V2A stainless steel Commercial tonnage: 35 t Main wheelbase: 2,980 mm Wheelbase between front axles: 1,795 mm Wheelbase between rear axle and trailing axle: 1,350 mm Exhaust silencer, side-mounted, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side 1-cylinder air compressor, 360 cc, with economy system Pneumatically regulated air processing Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency brake assist Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard light activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 HP) output, 2,650 Nm torque, Euro 6e Heated fuel filter for fuel up to purity class 25 Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as an option for an extra charge) Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Chodpfjwllmajx Amhoa Double linkage system with PROLINK (overbending articulated arm up to 12°) Electronic overload switch-off with FX900 FASSI stability control FSC including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load-holding valves XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base Hydraulic outriggers, hydraulically extendable on both sides, support width 8.84m Outriggers operable via radio control with proportional control block IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hooks and mounting shackles (short / 500mm) Transport position: folded transversely to the direction of travel Attention: Observe vehicle voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II IE742 connection box Low-profile subframe 180° hydraulically tiltable outriggers / both sides Control system for auxiliary function "winch / xhe-dynamic" Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on articulated arm LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support beams) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, engine speed +/-, 6x ON/OFF functions, 10m cable and various operating speed settings, including spare battery, charger, neck and waist belt.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Cedpfx Aowmh Hrsmhjha Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Platform truck and chassis, suitable for crane installation Chassis Color: Pure White RAL 9010 Cab Color: Graphite Black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 hp) Torque: 2,400 Nm Emission Standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-disc clutch (430 mm) Driving Modes: Efficiency, Manoeuvre, Idle Speed Driving, Rock-Free Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle spacing (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame rail thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic leveling control Spring load capacity: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (adjustable) Disc brakes on all axles Electronic parking brake Tyres & Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte finish Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, seat heating, armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage compartments Interior styling: Moon Grey Sun blinds, tilting roof Various storage solutions USB sockets LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Technical trailer load: max. 30,000 kg Csdpfx Amoxwra Iohoha Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency brake assist Lane departure warning Digital tachograph Advanced navigation system (7-inch) MAN SmartSelect Body Interfaces Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: hydraulic front-axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and government applications as well as flexible body solutions ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Colour: RAL 3020 traffic red, cylinders black Slewing Range Infinitely rotatable Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Linkage System Double linkage system with PROLINK Articulated arm can be overextended up to 15° Overload Protection Electronic overload shutdown FX500 FSC stability control LMB II Emergency stop and visual alarm Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency operation Stabilizers Hydraulically extendable on both sides Support width: 7.79 m Speed Control Dynamic Control – load-dependent Additional Articulated Boom / Jib Type: L214 4x hydraulically extendable up to 10.30 m

Condition: new, mileage: 400 km, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive ? Vehicle type: Flatbed truck and chassis, suitable for crane mounting ? Cab color: black with day registration 2025 Engine ? Type: MAN D2676 LF85 ? Power: 352 kW (480 hp) ? Torque: 2,400 Nm ? Emission class: Euro 6d Transmission ? MAN TipMatic 12-speed automatic transmission ? Reinforced single-plate clutch (430 mm) ? Driving programs: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis ? Wheelbase: 3,600 mm ? Overhang: 1,950 mm ? Main wheel spacing (between rear and tag axle): 1,350 mm ? Frame height above cab: up to 4,000 mm ? Frame longitudinal member thickness: 8 mm ? Frame end: straight Axles ? Front axle: 9,200 kg, steered, HydroDrive without through drive ? Rear axle: 13,000 kg, HY axle, not steered, without through drive ? Tag axle: 9,000 kg, steered, liftable, not driven ? Axle ratio: i = 3.70 Codpfx Amey Sqqqeheha Air suspension ? Electronically controlled air suspension (ECAS) on tag axle ? Automatic level adjustment ? Spring capacities: VA 9,500 kg / HA 13,000 kg / NA 8,000 kg Brakes ? Electronic brake system (EBS) ? ABS, ASR ? High-performance engine brake MAN EVBec (stepped) ? Disc brakes on all axles ? Electronic parking brake Tires and rims ? Front axle: 385/55 R22.5, steel rims 11.75x22.5 ? Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 ? Tag axle: Michelin 315/70 R22.5, Alcoa matte Cab ? Type: FN, flexible, narrow, normal height ? Comfort seats: air-sprung, seat heating, armrest ? Multifunction steering wheel ? Central locking ? Climatronic air conditioning system ? Lower comfort bunk ? Storage space in seat console and storage compartments ? Interior styling: Moon Grey ? Sun visors, tilting roof ? Various storage compartments ? USB sockets ? LED lighting Permissible loads ? Technically permissible gross weight: 26,000 kg ? Axle loads: VA 9,000 kg / HA 11,500 kg / NA 7,500 kg ? Technically permissible trailer load: max. 30,000 kg Tanks ? Fuel tank: 400 l ? AdBlue tank: 60 l Driver assistance systems ? ESP, ASR, cruise control ? Emergency brake assist ? Lane departure warning ? Digital tachograph ? Advanced navigation system (7 inches) ? MAN SmartSelect Interface for superstructures ? Pre-installation for crane mounting ? Trailer coupling: RINGFEDER Type 4040G150A ? Various electrical and pneumatic connections Special features ? HydroDrive: Hydraulic front-wheel drive for more traction ? Comfort features for the driver ? Factory interfaces and pre-installations for municipal, construction, and emergency services as well as flexible superstructures - FASSI loading crane F545RA.2 xe-dynamic base unit ? Type: F545RA.2 xe-dynamic ? CE directive EN 12999 HD5S2 compliant ? Color: RAL 3020 traffic red, cylinders black Slewing range ? Continuously rotatable Hydraulics ? Double-acting hydraulic cylinders ? Piston rods hard chrome-plated Joint system ? Double knee lever system with PROLINK ? Knuckle arm can be extended by up to 15° Overload protection ? Electronic overload cut-out FX500 ? FSC stability control ? LMB II ? Emergency shutdown and optical alarm Valves & filters ? Pressure relief and holding valves ? High-pressure filter ? Separate hydraulic tank 180 l with filter and oil cooler on the base Control ? FASSI radio remote control RCH/RCS ? Display of pressure values ? Danfoss D850 control block with 4 control valves ? Emergency operation Outriggers ? Hydraulically extendable on both sides ? Outrigger width: 7.79 m Speed control ? Dynamic Control - load-depen

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Chsdpfjzp Sz Asx Amhja Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: as good as new (ex-display), • - NORTAN 50 sleevit. Codpfx Amjd Srnuehoha • - one screw-conveyor for one cup size • - one eletronic device to change the ring lenght for millimeters • - gearmotor with inverter Danfoss • - frame completely clad in stainless steel • - photoelectric cell in entrance that determines the speed according to the flap • - antistoppage in out let of the machine • - photoelectric cell to adjust the film length • - stainless steel switchboard with PLC Omron • - stainless steel safety guards • - to be installed in a line. • MAX HOURLY SPEED : 6.000 B/H • MH.19.

Condition: good (used), mileage: 205,100 km, power: 81 kW (110.13 HP), first registration: 10/2021, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, total length: 5,420 mm, total width: 1,900 mm, total height: 1,990 mm, loading space length: 1,850 mm, loading space width: 1,690 mm, loading space height: 1,410 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Tinted windows - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric Chsdpfx Aezg Uiwsmhoa - Partition = Notes = Configuration: 4x2, Payload: 804 kg, Unladen weight: 1996 kg, Gross vehicle weight: 2800 kg, Trailer load, unbraked: 750 kg, Trailer load, middle axle, braked: 2200 kg, Trailer coupling, Type of cabin: Double cab, Cruise control, Air conditioning, Number of airbags: 2, Rear window wiper, Parking assist: Rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Grey, Metallic, Maintenance manual, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 81 kW (109 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Gearbox type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Side paneling, Roof rack: None, Side doors: 1, Side windows: 2, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L2 Double Cab Tow Hitch Navi NAP Airco Service History Euro6, Spare wheel, Tire type: Winter tires = Additional Information = General Information Number of doors: 1 License plate: VLT-14-V Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 1,996 kg Payload: 804 kg GVW: 2,800 kg Functional Height of loading area: 55 cm Maintenance APK (Technical Inspection): Valid until 05.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €276 per month (van, 72 months); Ask for further information and conditions.

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 14,900 W, number of axes: 4, This 4-axis HAAS ST-15Y was manufactured in 2020. It features a maximum spindle speed of 4000 rpm and a spindle power of 14.9 kW. The machine has a workpiece diameter over the bed of 419 mm and a maximum cutting length of 406 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15Y horizontal turning machine we have for sale. Contact us for further details. • Capacities • Chuck size: 210 mm • Max part swing: 419 mm • Max cutting diameter (BOT or VDI turret): 305 mm • Max cutting length: 406 mm • Bar capacity: 64 mm • Feedrates (rapid) • X-axis: 12.0 m/min • Y-axis: 12.0 m/min • Z-axis: 30.5 m/min • Axis motors (max thrust) • X-axis: 10,676 N • Y-axis: 10,231 N • Z-axis: 16,458 N • Spindle • Spindle nose: A2-6 Cjdpfx Ajzlr I Ismhjha • Spindle bore: 88.9 mm • Max spindle torque: 203 Nm at 500 rpm • Main spindle C-axis • C-axis power: 3.7 kW • Max speed: 60 rpm • Positioning accuracy: ±0.02° • Brake clamp force: 4448 N • Brake diameter: 366 mm • Brake holding torque: 190 Nm • Control: Interpolated motion and positioning • Turret and tooling • Turret: 12-station hybrid (6 VDI / 6 BOT) • Tool taper: VDI40 • Live/rotating tools: Yes, max speed 4000 rpm • Boring bar rear clearance: 19.1 mm • Tool stations: 12 • Tailstock • Type: Hydraulic tailstock • Quill travel: 95 mm • Manual body positioning: 508 mm • Thrust range: 623–5027 N • Coolant and air • Coolant capacity: 114 L • Air required: 113 L/min at 6.9 bar • Electrical • Input AC voltage (3-phase high): 440 VAC • Full load amps (3-phase high): 20 A • Full load amps (3-phase low): 40 A • Configuration notes • C-axis: Yes • Y-axis: Yes • Driven tools: Yes • Counter spindle: No Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2010, condition: refurbished (used), Span approx. 6.5 m Lifting height under pulleys approx. 6.0 m Total height approx. 7.9 m - Tyres 16.00-25 N°4, 10 kg/cm², 2 of them driven - 2 hoists separately and jointly controllable - Iveco diesel engine 74 kW, 2200 rpm - Hydraulics Bosch-Rexroth, Sauer-Danfoss - Electrical control Siemens, Télémécanique Cjdpfx Aemdrymjmhoha - Operating hours only approx. 600 hours

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: - 0.75 L GDB bottle (height approx. 295 mm) Crate formats: Chsdpfx Amsytphcehea - 12-bottle Pool N2 crate (400 × 266 × 333 mm) - 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: - Cross-flow crate transport - Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: - Length: 2,700 mm - Width: 1,400 mm - Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: - Danfoss frequency converter - Standard electrical configuration Additional equipment: - Cap transport system - Blower unit - Technical documentation available Condition: Used Availability: On request

Condition: used, Year of construction: 2015, Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details - Leistung: bis zu 50.000 bph - Bauart - Rotierend - Arbeitsrichtung gegen den Uhrzeigersinn (r-l) - Modulare Maschine - Höhe des Förderbandes: 1150 mm - Etikettentyp: Kaltleim - Position des Etiketts - Brust/Hals - Stanniol - Körper - Rücken - Siegel - Flaschenformate Chedpfxsv I Tnxs Amhja - 0,25l Vichy-Flasche - 0,5l GDB - 0,7l GDB - 0,75l Gastro-Flasche - Anzahl der Aggregate: 3 - Teilkreisdurchmesser: 1800 mm - Anzahl der Flaschenteller: 45 - Teilungsdurchmesser: 125,6 mm - Ausrichtung der Flaschenteller über Danfoss-Servoantriebe - Erkennung von beschädigten oder umgefallenen Flaschen am Einlauf - Stoppstern am Einlauf - Leimwalzen aus Stahl - Vorbereitet für Flaschenausrichtung durch Kameraerkennung - Heissleimwerk für Siegeletikett von Robatech - Heissleimdüse an der Etikettierstation montiert - Siemens S7 - Technische Dokumentation vorhanden Lieferumfang - Datumscodierer - Leimpumpen Unipump H (heizungsgesteuert)

Condition: good (used), Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A -Pump: Lowara type CEA70/5 0.55 kW -Total dimensions: 740/710/H930 mm Chodpfx Aelpi Tqomhsa -Weight: 196 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roller conveyor: with hydraulic drive Cedpfxog N Tuze Amheha -Roll width: 500 mm -Diameter roller: 50 mm -Center distance: 70 mm -Hydraulic motor: Danfoss type OMM 12.5 -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, For sale is a professional, indirect-fired oil-fired heater, APEX model BGO-80B (Type 56217), 80 kW heating capacity, manufactured in 01/2026, complemented by an external 1000-liter fuel tank system with an approved steel spill containment basin (manufacturer Dübi AG) including connecting lines. Application: Heating and drying of halls, workshops, greenhouses, storage rooms, and outdoor areas in the construction and agricultural sectors. Not suitable for closed rooms without ventilation. The unit has an integrated 69-liter tank system but can optionally be connected directly to the supplied external 1000-liter fuel tank system via the existing oil-resistant, reinforced connecting lines (Ø 10 mm, 2 m length). This allows for significantly longer continuous operation without refilling. Buyers who only need the heater can forego the external fuel tank and use the internal 69L tank system. Heater features: Integrated electronic thermostat with digital display (setpoint/actual value setting) Additional external room thermostat with a 10 m connection cable (remote measurement/control) Automatic electronic ignition with flame monitoring Danfoss injection pump, stainless steel combustion chamber with fan cooling External, easily accessible fuel filter Chassis with extra-large wheels and handle Removable exhaust stack (Ø150 mm) for direct connection to an exhaust pipe Technical data of the heater: Parameter Value Model APEX BGO-80B (Type 56217) Heating capacity 80 kW / 68,800 kcal/h Fuel Diesel / heating oil Consumption 7.5 l/h Mains voltage 230V ~ 50Hz Fan motor 900 W Blower capacity 2,000 m³/h Blower outlet diameter 340 mm Flue connection Ø150 mm Tank capacity (internal) 69 l Dimensions (L x W x H) 1330 x 568 x 1028 mm Weight 59 kg Year of manufacture 01/2026 Protection class IPX4 External fuel tank system (included): Plastic tank, 1000 liters, with level indicator Steel spill containment basin "Dübi", 100% retention volume, EAGS certificate, manufacturer's serial number 199890 2x connecting lines, Ø10 mm, 2 m, oil-resistant/reinforced (compatible with internal or external tank) Total scope of delivery: 1x APEX oil-fired heater 80 kW with thermostat, digital display, and exhaust stack 1x external room thermostat including 10 m connection cable 1x 1000L fuel tank system with steel spill containment basin 2x connecting lines Ø10mm, 2m Chodpfx Aezrwapsmhoa Condition: Well-maintained, very little use (approx. 200 operating hours), fully functional. Location: 6064 Kerns, Obwalden