Used Danfoss Vlt 5052, 175Z4189 for sale (190)

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Ksdpfx Aisrz R Arofelw Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: used, Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 85-089, overall weight: 20,000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation based on a Reinartz AP15 press with a 55Kw motor driven via a DANFOSS VLT 5062 frequency controller and has a capacity of 1000 Kg rapeseed - 800 Kg sunflower seeds per hour, a crude oil stirring tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump as feed to an automatic AMA filter system consisting of a plate filter with 20 m2 filter surface and 2 fine filters, one with filter bag and one with filter candles up to 0.5 micron size of the impurities. The seed supply is done via a dosing screw with the possibility of heating the seed, the real entrance to the press is protected by a permanent magnet to catch iron impurities. The discharge of the rapeseed cake is done via a chain conveyor and conveyor belt. The entire installation is controlled via a SIEMENS Simatic Multi Panel touch screen control cabinet of approximately 1m wide / 2m high. This cabinet also contains a modem to forward error messages to various GSMs. The control can work in auto mode as well as in manual mode. Kjdjwl Afyspfx Aifslw In addition to these most important systems, the installation also contains the necessary additional silos for filling the main silo, which enables 24/7 operation. The entire installation was built in 2006 and has produced 14,000 hours and is now completely ready for transport. If desired, the sale of individual elements can be discussed. If further information is required, this can best be done by email and preferably in Dutch, French or English.

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Kjdpfxex Tdyzo Aifjlw Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Thanks to the wide performance range, these devices are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. Kjdstqt Uxopfx Aifjlw The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm

Year of construction: 2010, condition: refurbished (used), Span approx. 6.5 m Lifting height under pulleys approx. 6.0 m Total height approx. 7.9 m - Tyres 16.00-25 N°4, 10 kg/cm², 2 of them driven - 2 hoists separately and jointly controllable - Iveco diesel engine 74 kW, 2200 rpm Kledpfsmdrymjx Aifsw - Hydraulics Bosch-Rexroth, Sauer-Danfoss - Electrical control Siemens, Télémécanique - Operating hours only approx. 600 hours

Condition: good (used), mileage: 205,100 km, power: 81 kW (110.13 HP), first registration: 10/2021, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, total length: 5,420 mm, total width: 1,900 mm, total height: 1,990 mm, loading space length: 1,850 mm, loading space width: 1,690 mm, loading space height: 1,410 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Tinted windows - Halogen lamp - None - Manual Kedezg Uiwspfx Aifjlw - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 804 kg, Unladen weight: 1996 kg, Gross vehicle weight: 2800 kg, Trailer load, unbraked: 750 kg, Trailer load, middle axle, braked: 2200 kg, Trailer coupling, Type of cabin: Double cab, Cruise control, Air conditioning, Number of airbags: 2, Rear window wiper, Parking assist: Rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Grey, Metallic, Maintenance manual, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 81 kW (109 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Gearbox type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Side paneling, Roof rack: None, Side doors: 1, Side windows: 2, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L2 Double Cab Tow Hitch Navi NAP Airco Service History Euro6, Spare wheel, Tire type: Winter tires = Additional Information = General Information Number of doors: 1 License plate: VLT-14-V Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 1,996 kg Payload: 804 kg GVW: 2,800 kg Functional Height of loading area: 55 cm Maintenance APK (Technical Inspection): Valid until 05.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €276 per month (van, 72 months); Ask for further information and conditions.

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: - 0.75 L GDB bottle (height approx. 295 mm) Crate formats: - 12-bottle Pool N2 crate (400 × 266 × 333 mm) - 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: - Cross-flow crate transport - Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: - Length: 2,700 mm - Width: 1,400 mm - Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: - Danfoss frequency converter - Standard electrical configuration Kjdpfx Aeytphceifslw Additional equipment: - Cap transport system - Blower unit - Technical documentation available Condition: Used Availability: On request

Condition: used, Year of construction: 2015, Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details - Leistung: bis zu 50.000 bph - Bauart - Rotierend - Arbeitsrichtung gegen den Uhrzeigersinn (r-l) - Modulare Maschine - Höhe des Förderbandes: 1150 mm - Etikettentyp: Kaltleim - Position des Etiketts - Brust/Hals - Stanniol Kodpfx Asv I Tnxsifolw - Körper - Rücken - Siegel - Flaschenformate - 0,25l Vichy-Flasche - 0,5l GDB - 0,7l GDB - 0,75l Gastro-Flasche - Anzahl der Aggregate: 3 - Teilkreisdurchmesser: 1800 mm - Anzahl der Flaschenteller: 45 - Teilungsdurchmesser: 125,6 mm - Ausrichtung der Flaschenteller über Danfoss-Servoantriebe - Erkennung von beschädigten oder umgefallenen Flaschen am Einlauf - Stoppstern am Einlauf - Leimwalzen aus Stahl - Vorbereitet für Flaschenausrichtung durch Kameraerkennung - Heissleimwerk für Siegeletikett von Robatech - Heissleimdüse an der Etikettierstation montiert - Siemens S7 - Technische Dokumentation vorhanden Lieferumfang - Datumscodierer - Leimpumpen Unipump H (heizungsgesteuert)

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V Kledpozmkxhefx Aifow FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: good (used), Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A Ksdpfx Aelpi Tqeifjlw -Pump: Lowara type CEA70/5 0.55 kW -Total dimensions: 740/710/H930 mm -Weight: 196 kg

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Detachable platform body, Jost fifth wheel coupling, fully clad in stainless steel (V2A) Commercial tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side exhaust silencer, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left Kledpfx Aowllmmsifjw 35 l AdBlue tank capacity, right Air compressor, 1 cylinder, 360 cc, with fuel-saving system Pneumatically controlled air dryer Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e Heated fuel filter, for fuels up to cleanliness class 25 Fuel pre-filter, with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as option at extra charge) Unlimited slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle boom system with PROLINK (overbending offset boom by up to 12°) Electronic overload protection with FX900 FASSI stability control FSC incl. LMB II Emergency stop, with optical alarm (90% and 100%) Pressure limiting and load holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and pressure value display (in bar and %) and 90%/100% warning on display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied piped Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base Hydraulic outriggers, extendable on both sides, support width 8.84 m Supports operated via radio with proportional control block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hook and mounting clevises (short / 500 mm) Travel position: boom folded transverse to vehicle direction Note: Observe onboard voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 connection box Low profile foundation 180° hydraulically upward-and-outward swinging support legs / both sides Control system for auxiliary function - winch / xhe-dynamic Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work lights operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LEDs for 2 support legs, not mounted (crane) LEDs for 2 support legs, not mounted (additional outriggers) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS Radio remote control V7 RCS Fassi radio remote control V7S: available with 6 or 8 functions, with linear levers or joysticks. V7S with 4.3" color display / 24bit – 480 x 272 px, with 8 push buttons Engine start/stop, speed up/down, 6 x ON/OFF functions, 10m cable and various working speed regulations, incl. spare battery, charger, neck and waist belt

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation Klsdox A Npdepfx Aifjw High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: new, mileage: 400 km, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive ? Vehicle type: Platform truck and chassis, suitable for crane installation ? Cab color: black With initial registration in 2025 Engine ? Type: MAN D2676 LF85 ? Power: 352 kW (480 hp) ? Torque: 2,400 Nm ? Emission class: Euro 6d Transmission ? MAN TipMatic 12-speed automatic Klodpsy Sqqwsfx Aifow ? Reinforced single-plate clutch (430 mm) ? Driving programs: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis ? Wheelbase: 3,600 mm ? Overhang: 1,950 mm ? Main wheelbase (between rear and tag axle): 1,350 mm ? Frame height above cab: up to 4,000 mm ? Frame longitudinal member thickness: 8 mm ? Frame end: straight Axles ? Front axle: 9,200 kg, steered, HydroDrive without through-drive ? Rear axle: 13,000 kg, HY axle, not steered, without through-drive ? Tag axle: 9,000 kg, steered, liftable, not driven ? Axle ratio: i = 3.70 Air suspension ? Electronically controlled air suspension (ECAS) on tag axle ? Automatic level adjustment ? Suspension load capacities: Front axle 9,500 kg / Rear axle 13,000 kg / Tag axle 8,000 kg Brakes ? Electronic braking system (EBS) ? ABS, ASR ? High-performance engine brake MAN EVBec (stepped) ? Disc brakes on all axles ? Electronic parking brake Tires and rims ? Front axle: 385/55 R22.5, steel rims 11.75x22.5 ? Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 ? Tag axle: Michelin 315/70 R22.5, Alcoa matte Cab ? Type: FN, flexible, narrow, normal height ? Comfort seats: air-suspended, seat heating, armrest ? Multifunction steering wheel ? Central locking ? Climatronic air conditioning ? Lower comfort bed ? Storage space in seat console and storage compartments ? Interior styling: Moon Grey ? Sun visors, pop-up roof ? Various storage compartments ? USB ports ? LED lighting technology Permissible loads ? Technically permissible total weight: 26,000 kg ? Axle loads: Front axle 9,000 kg / Rear axle 11,500 kg / Tag axle 7,500 kg ? Technically permissible trailer load: max. 30,000 kg Tanks ? Fuel tank: 400 l ? AdBlue tank: 60 l Driver assistance systems ? ESP, ASR, cruise control ? Emergency braking assistant ? Lane departure warning ? Digital tachograph ? Advanced navigation system (7 inches) ? MAN SmartSelect Interfaces for superstructures ? Pre-installation for crane installation ? Trailer coupling: RINGFEDER type 4040G150A ? Various electrical and pneumatic connections Special features ? HydroDrive: Hydraulic front-wheel drive for more traction ? Comfort features for the driver ? Factory interfaces and pre-installations for municipal, construction and emergency services as well as flexible superstructures – FASSI loading crane F545RA.2 xe-dynamic base unit ? Type: F545RA.2 xe-dynamic ? Complies with CE directive EN 12999 HD5S2 ? Color: RAL 3020 traffic red, cylinders black Slewing range ? Continuously rotatable Hydraulics ? Double-acting hydraulic cylinders ? Piston rods hard chrome-plated Joint system ? Double knuckle system with PROLINK ? Knuckle arm can be extended by up to 15° Overload protection ? Electronic overload shutdown FX500 ? FSC stability control ? LMB II ? Emergency shutdown and optical alarm Valves & filters ? Pressure relief and holding valves ? High-pressure filter ? Separate hydraulic tank 180 l with filter and oil cooler on the base Control ? FASSI radio remote control RCH/RCS ? Display of pressure values ? Danfoss D850 control block with 4 control valves ? Emergency operation Outriggers ? Hydraulically extendable on both sides ? Outrigg

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and Cable Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Tandem, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank, right side AdBlue tank usable volume 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Step E - onboard diagnostics Klodpfjx A Nn Tox Aifew Cab color: Signal White Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, ramp mirror on passenger side Front mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic switching between daytime running and dipped beam Automatic headlight leveling LED daytime running lights, “V-light” Front LED fog lights Static LED cornering light Two LED roof beacons (orange), mounted front of cab roof Cab roof penetrations, both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from steering wheel Roof antenna and CB radio preparation Accessory mounting rail, front Original manufacturer emblems/type designations Emission type plate (Euro...) L-plate (low noise vehicle -96) Flatbed body as steel/welded construction, permanently mounted, low-profile design Length approx. 4,800 mm, width approx. 2,480 mm Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Recessed lashing rings, 2,500 daN and 6,500 daN each side, in profiled slots with flexible positioning 6 stakes pockets per side (3 per side) Hydraulically extendable bed extension, approx. 1,200 mm, hot-dip galvanized, loadable up to 3,000 kg, extendable with lighting and underrun protection, deeply recessed if possible, radio remote-controlled Sturdy front wall consisting of welded frame with recessed stake storage pockets Cladding plates, mudguards in checker plate, sand-blasted and powder-coated and painted in vehicle color Toolboxes between the rear axles with checker plate 5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space Sand-blasted, powder-coated and painted in vehicle color Installation of underrun protection at the rear and additional outriggers, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20 for twin-line operation with folding sheave and accessories. Infinite slewing range All hydraulic cylinders double acting Piston rods hard chromed Double linkage system with PROLINK (knuckle boom can be over-extended by up to 15°) Electronic overload cut-off system with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shutoff and optical alarm at 90% and 100% Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (180l) with filter

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Kodpfox A Nntex Aifelw Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, mileage: 400 km, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive ? Vehicle type: Flatbed truck and chassis, suitable for crane mounting ? Cab color: black With day registration for 2025 Engine ? Type: MAN D2676 LF85 ? Power: 352 kW (480 hp) ? Torque: 2,400 Nm ? Emission class: Euro 6d Transmission ? MAN TipMatic 12-speed automatic transmission ? Reinforced single-plate clutch (430 mm) ? Driving programs: Efficiency, Manoeuvre, Idle Speed Driving, Rocking mode Chassis ? Wheelbase: 3,600 mm ? Overhang: 1,950 mm ? Main axle distance (between rear and trailing axle): 1,350 mm ? Frame height above cab: up to 4,000 mm ? Frame longitudinal member thickness: 8 mm ? Frame end: straight Axles ? Front axle: 9,200 kg, steered, HydroDrive without through-drive ? Rear axle: 13,000 kg, HY axle, not steered, without through-drive ? Trailing axle: 9,000 kg, steered, liftable, not driven ? Axle ratio: i = 3.70 Air suspension ? Electronically controlled air suspension (ECAS) on trailing axle ? Automatic level adjustment ? Suspension load capacities: Front axle 9,500 kg / Rear axle 13,000 kg / Trailing axle 8,000 kg Brakes ? Electronic brake system (EBS) ? ABS, ASR ? High-performance engine brake MAN EVBec (stepped) ? Disc brakes on all axles ? Electronic parking brake Tires and rims ? Front axle: 385/55 R22.5, steel rims 11.75x22.5 ? Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 ? Trailing axle: Michelin 315/70 R22.5, Alcoa matte Cab ? Type: FN, flexible, narrow, normal height ? Comfort seats: air-sprung, seat heating, armrest ? Multifunction steering wheel ? Central locking ? Climatronic air conditioning ? Lower comfort bunk ? Storage space in seat console and storage compartments ? Interior styling: Moon Grey ? Sun protection blinds, tilting roof ? Various storage compartments ? USB ports ? LED lighting Permissible loads ? Technical gross vehicle weight: 26,000 kg ? Axle loads: Front axle 9,000 kg / Rear axle 11,500 kg / Trailing axle 7,500 kg ? Technical trailer load: max. 30,000 kg Tanks ? Fuel tank: 400 l ? AdBlue tank: 60 l Assistance systems ? ESP, ASR, cruise control ? Emergency brake assist ? Lane departure warning ? Digital tachograph ? Advanced navigation system (7 inches) ? MAN SmartSelect Interfaces for superstructures ? Pre-installation for crane mounting ? Trailer coupling: RINGFEDER Type 4040G150A ? Various electrical and pneumatic connections Special features ? HydroDrive: Hydraulic front-wheel drive for more traction ? Comfort features for the driver ? Factory interfaces and pre-installations for municipal, construction, and authority applications, as well as flexible superstructures - FASSI loading crane F545RA.2 xe-dynamic base unit ? Type: F545RA.2 xe-dynamic ? Complies with CE directive EN 12999 HD5S2 ? Color: RAL 3020 traffic red, cylinders black Slewing range ? Continuously rotatable Kedpfx Aioy Sqq Djfjlw Hydraulics ? Double-acting hydraulic cylinders ? Piston rods hard-chrome plated Joint system ? Double knuckle system with PROLINK ? Outrigger arm can be extended up to 15° Overload protection ? Electronic overload cut-off FX500 ? FSC stability control ? LMB II ? Emergency shutdown and optical alarm Valves & filters ? Pressure relief and holding valves ? High-pressure filter ? Separate hydraulic tank 180 l with filter and oil cooler on the base Control ? FASSI radio remote control RCH/RCS ? Display of pressure values ? Danfoss D850 control block with 4 control valves ? Emergency operation Outriggers ? Hydraulically extendable on both sides

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roller conveyor: with hydraulic drive -Roll width: 500 mm -Diameter roller: 50 mm -Center distance: 70 mm -Hydraulic motor: Danfoss type OMM 12.5 Ksdeg N Tuzopfx Aifjlw -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

Condition: good (used), Drawbar head, control unit, steering system, steering unit, steering control unit, steering orbitrol -Manufacturer: Toyota, Steering control unit with steering system for forklift trucks -Steering control unit: Danfoss OSPC 100 ON 150N1066 steering orbitrol -Dimensions: see photos -Price/Fee: complete Kljdpfxozg U Hco Aifsw -Transport dimensions: 620/370/H355 mm -Weight: 16.5 kg

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 20,800 mm, fork length: 1,200 mm, total length: 7,890 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar Ksdpfx Ajzkb Nfsifslw - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 Ksdpfxezhma Dj Aifslw (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: excellent (used), Rehsler cooler consisting of: Industrial cooler, refrigeration unit Chiller Danfoss MTZ64HM4 air conditioning unit Condenser 125, 2 fans, d=450 mm, 230V, 3.6 A Conversion of chilled water system Klsdpfezlkwusx Aifjw

Condition: used, mileage: 730,552 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - PTO (Power Take-Off) - Radio/multimedia system - Warning beacon - Disc brakes - Sliding sunroof - Sleeper cab - Seat heating - Sun visor - Lane departure warning system - Auxiliary heater - Pre-heating system - Toolbox - Windshield Internal reference number for customer inquiries: 4-264 MAN TGX 26.500 6x4 Short Log Truck Complete with TajfunLiv 150Z 9.6 Loading Crane. Vehicle Description: Truck: MAN TGX 26.500 6X4 BL, wheelbase 4500 mm Engine: D2676LF51 - 500 HP / 368 kW, EURO 6 SCR - 2500 Nm, C-R OBD-C Transmission software for off-road use (TipMatic OFFROAD) ZF 12 TX 2821 OD MAN TipMatic gearbox with ZF Intarder PTO 2 NA NTX/10 without flange f=0.96 top and NTX/10 with flange f=1.31 bottom Parking brake with pneumatic application of the front axle brakes Cab with medium-height high roof "XLX", 2440 mm wide, 2280 mm long Equipment packages Comfort Package 1 Driver MAN Media Package Navigation Driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating Additional air heater EBERSPÄCHER D4S Air conditioning AC R134A CFC-free with automatic temperature control 1 sleeper bunk with storage (aluminum frame) Mattress for lower sleeper bunk Radio MAN Media Truck Advanced 12V with 7" display and navigation preparation Navigation SD EUROPE FULL "Comfort" hands-free functionality for 2 mobile phones (supports MFL and Bluetooth®) Body: OptiPa bolster body 4 ExTe D5 bolsters with 8 ExTe aluminum telescopic stakes Robust steel front wall Access on passenger side Access box on driver side Toolbox on passenger side Two snow chain holders New tire cover tarpaulin Crane: TajfunLIV 150Z 9.6 TAJFUN LIV fully hydraulic timber loading crane Classification according to EN12999 Declaration of conformity CE version Color: black Reach 9.60 m (double extension), lifting moment 141 kNm Internal hoses in telescopic sections Slewing gear Slewing range 425° Control block PARKER H170CF Telescopic stabilizers Support legs swiveling upwards to 45° Rigid stabilizer pads Support leg control with electrohydraulic Danfoss PVG 32 valve Kjdpfsylnpcjx Aifslw Dead center above cab Dual circuit system Toggle lever on lifting cylinder Lifting cylinder guard Operating hours counter Spotlight on knuckle arm Spare parts catalog and user manual in German Continuous rotator 10 t Seat heating LED work lights Inclination switch Start / Stop function - Linear lever control (4+2) - Grapple GO53x This offer is non-binding. Subject to prior sale, errors, and changes. General Information Cab: Long-distance traffic Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Gross vehicle weight: 26,000 kg Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65-22.5; steered; suspension: leaf spring Rear axle 1: Tyre size: 315/80-22.5; differential lock; suspension: air suspension...

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control system - Aluminum fuel tank - Rear work lights Kljdpfx Aioylxrzsfsw - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - DAB radio - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air horn - Particulate filter - PTO (power take-off) - Radio/multimedia system - Beacon light - Reversing camera - Disc brakes - Sliding roof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Pre-heating system - Toolbox - Windshield Internal reference for customer inquiries: Reference vehicle -> 3-150 MAN TGX 33.520 6x4 BLS with FASSI F485RA.2.28 xe-dynamic loader crane Loader crane and body: F 485RA.2.28 xe-dynamic Endless slewing range All hydraulic cylinders double-acting Double linkage system with PROLINK FASSI stability control system FSC incl. LMB II Radio remote control, Fassi V7S remote with maxi-6 linear levers and color display FL system (full lift) selectable fast extension valve Max. outreach 20.95 m with 1,325 kg lifting capacity (optionally extendable to 24.95 m) Electronic overload protection system with FX900 Danfoss D850 control valve Work lights Control unit for additional function: winch / xe-dynamic PAVIC compact tractor unit crane body Ball-and-socket bearing on superstructure for optional separate ballast platform use (ballast platform 3600 x 2480 x 800 mm approx. €14,500 net) Vehicle: MAN TGX 33.520 6x4 BL tractor unit Max. permissible gross train weight 73,000 kg Engine D2676LF78 - 520 HP EURO 6e - 2650 Nm C -R OBD-D MAN TipMatic 12.28 OD with retarder 35 MAN TipMatic performance driving mode up to 70,000 kg Extension MAN TipMatic driving program, 70,000 kg to 90,000 kg, heavy haulage MAN TipMatic off-road driving program up to 70,000 kg Hypoid rear axle HYD-1370/HY-1350 Differential lock on rear axles Fuel tank 370l right side and 60l AdBlue Drive 6x4 Wheelbase 3300+1350 mm Suspension leaf/air ECAS air suspension system Rear frame overhang 750 mm Trailer coupling ROCKINGER 400G150A Trailer coupling for drawbar trailer (conversion ex works) Fifth wheel JOST JSK 37 C, mounting height 185 mm, with integrated lubrication Kingpin offset 1125 mm Fifth wheel plate 40 mm, manufacturer JOST (kingpin load up to 36 t) GM cab: the spacious one (wide, long, medium height) Electric glass sunroof MAN EasyControl panel, 2 functions, operable from outside with door open Driver comfort seat, air-sprung with lumbar support, shoulder adjustment, and heating 2 bunk beds Fully retractable cool box under bunk Storage compartment on rear cab wall with gooseneck lamp and control module MAN Media System Navigation Professional 12.3-inch MAN SmartSelect infotainment control with touchpad and direct access buttons Smartphone integration Lane departure warning (LDW) Digital axle load display (ALM) in cab for air-suspended axles and much more. Financing / hire purchase, as well as leasing /...

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data - Capacity: - approx. 70 cans/min (500 ml) - approx. 100 cans/min (250 / 330 ml) - Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) - Application: Filling and seaming of cans (beer, soft drinks, RTDs) - Configuration: 10 filling valves / 2 seaming heads - Filling system: Counter-pressure filling - Filling pressure: approx. 0.15 – 0.4 MPa - Filling temperature: approx. 1 – 4 °C - CO₂ management: Pre-purging and undercover gassing, oxygen reduction system - Seaming system: Lid size 202 (200 optional), manual lid feeding - Control system: Siemens S7-1200 PLC with HMI touchscreen - Drive system: Frequency inverter (Danfoss), unified drive - Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa - CO₂ supply: ≥ 0.3 MPa - Water consumption: approx. 0.2 m³/h - Dimensions: approx. 3,153 × 1,980 × 2,350 mm Kjdpfxezbhi Ie Aifolw - Weight: approx. 5,500 kg Scope of Delivery - Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer - Control system | Siemens | S7-1200 | PLC with touchscreen HMI - Drive system | Danfoss | Frequency inverter - Filling valve cores | 1 set - Seaming rollers | 1 set (#1 and #2) - Seaming chuck | 1 unit - Can mouth seals | 10 units - Filling valve seals | 10 sets

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! TipMatic – Automatic Transmission 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Towing hitch (AHK) Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions Kodpfx Aisyxinzsfjlw High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel