Used Diamond Sj 22 for sale (9,229)

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bsdpfxoy R Npij Afkswn Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. Bsdpfsy Emthjx Afkjwn With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, Year of construction: 2003, x-travel 2.000 mm y-travel 1.000 mm z-travel 1.200 mm control TNC 430 Heidenhain turning speed range - main spindle 20 - 5.000 min/-1 transmission ratio 2 power capacity - main spindel 30 (100%) / 45 (40%) kW Torque 1.050 / 1.580 Nm tool taper HSK 100 swivellable B: +/- 180 ° indexing B: 0,001 ° table surface area 1.000 x 2.000 mm max. table load 4.000 kg flute distance 100 mm T-slots 18 H7 number of T-slots 10 number of toolpositions 40 pos. tool taper HSK 100 tool changing time 10 sec Bwsdoxmag Ijpfx Afkon max. tool diameter 250 mm max. tool length 400 mm max. tool weight 20 kg feed speeds X,Y,Z: 0 - 20.000 mm/min feed speeds B: 10 1/min output X,Z: 15,7 / Y: 8,5 kW output B: 2,5 kW feed power 22'500 N weight of the machine ca. 23 t dimensions of the machine ca. 8,0 x 8,0 x 3,3 m 4-Axis CNC Machining Center - Universal REIDEN - BFR 22 - incl. 2x tool cabinets for collets - incl. 3x pull-out cupboards - incl. 1x workbench - incl. Ringler chip extractor

Condition: used, power capacity 26 kW volt 200 V ampere 139 A Bsdpfxsy S D Ivo Afkjwn revolutions per minute 1150/3450/6000 U/min For sale is a functional MITSUBISHI SJ-26BZ spindle motor AC spindle motor 15kW for Mazak machines WEIGHT: approx. 230kg

Condition: used, mileage: 242,000 km, power: 162 kW (220.26 HP), first registration: 11/2014, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, tail-lift, short cab fully air-suspended differential lock air conditioning heated seats automatic transmission Brandt refrigerated body 2 compartments (partition wall 4,600 mm long) loading space on the right: 4,600 x 820 mm portal doors side door 1,500 kg MBB Palfinger tail lift Bwedpfx Aeza Nlhefkon Carrier Supra 1,250 refrigeration unit Euro 6

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm Bjdoy R Sgdspfx Afkewn -Total weight: 3.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Bjdpfx Afey R R Ndjkjwn -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H56 mm -Total weight: 2.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm Bodpfx Afjy R R I Tjkewn -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Bwsdpozardgefx Afkon Hersteller: DR. BOY Typ: 22 D Baujahr: 2004 Schließkraft: 22 Tonnen Holmabstand: 254 x 254 mm Einbauhöhe MIN, / MAX. 200 / 400 mm Schnecken DN: 22 mm Spritzteilgewicht 27 g/PS

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine Hersteller: DR. BOY Typ: 22 D Baujahr: 1999 Schließkraft: 22 Tonnen Bwedpezaqzdofx Afksn Holmabstand: 254 x 254 mm Einbauhöhe MIN, / MAX. 200 / 400 mm Schnecken DN: 22 mm Spritzteilgewicht 27 g/PS

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: TK, double hydraulic pump -Type: 22TK6/6S / 22 I 0004 -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 3x pumps available -Price: per piece Bwedpfjvvrz Hex Afkjn -Dimensions: 215/88/H110 mm -Weight: 5.8 kg/piece

Condition: ready for operation (used), Lang CNC L-Step 22/2 MFP stepper motor controller, SN: V / 200 - 240 V / 50 - 60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Bwsdpfoy Sdvajx Afkon

Condition: used, Year of construction: 2012, Double-spindle machining centre with swivelling carrier for mounting clamping bridges Bwodpfx Aeyw R Ndjfkjn Traverse paths x-axis: 800 mm / y-axis: 900/1200 mm / z-axis: 650 mm Spindle distance: 800 mm Spindle speed up to 12,500 rpm Power 10% - 40% - 100% duty cycle = 42 / 35 / 28 kW Torque 10% - 40% - 100% duty cycle = 200 / 165 / 135 Nm Tool changer: 2 x 42 tool positions Tool holder: HSK 80 Rapid traverse: 120 m/min - CNC control Siemens 840 Dsl - Central coolant system

Condition: used, maximum load weight: 2,860 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2022, total width: 2,320 mm, Year of construction: 2022, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional car transport. Fitzel Algema Eder Euro-Trans 35-22/53X tarpaulin trailer, pendulum axle, 100 km/h approval, single owner, used twice, no signs of wear, as new condition. Gross weight 3,500 kg, Tare weight approx. 640 kg (including special equipment), payload 2,860 kg X-Line pendulum axles for 100 km/h approval Lift axle preparation Tyres: 195/50 R13C 104N M+S on alloy rims Loading dimensions: 5,300 x 2,180 mm, loading height 660 mm Overall dimensions: 6,620 x 2,220 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable due to center-of-gravity shift with descent and tilt damper • 2 extractable and infinitely laterally adjustable ALU loading ramps, centrally lockable, operable from both sides, lockable • 2 rubber buffers per loading ramp for safe locking when retracted • Lashing straps, attachable on both sides at over 50 lashing points, for legally required load securing • 1 certified load securing according to TÜV certificate no. LS1206430Z1 • 1x 13-pin plug connection cable, 1 metre long, 12 volts • 8 large rear lights incl. 2 reverse lights and 2 rear fog lights • 2 rear outline marker lights, 4 orange side marker lights and 2 white front position lights - for your safety Bwsdpfxozamuye Afkon • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support wheel at the front allows for easy single-axle maneuvering with rubber-sprung axle • Reflective side stripes for your safety - F-band • 2 rear rolling supports • 2 driving tracks (550 mm wide, roughened) for safe, slip-free loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers required for 100 km/h approval Included special equipment: • Aluminum floor plate • High tarpaulin 5.30 x 2.30 x 2.00 m (internal loading dimensions LxWxH) - Complete aluminum frame with 2 support wheels, rollable as a unit - Front chamfered 600 x 600 mm - Incl. truck-grade tarpaulin, color black - Roll-up by hand on all 4 sides - Auxiliary loading mirror fitted front left - Winch clamp holder at the front right of the tarpaulin frame (tarpaulin height customizable) • Tarpaulin color: RAL black • High rear tailgate for tarpaulin • Right-hand side flap • Sliding curtain left and right Empty weight incl. special equipment only approx. 640 kg = 2,860 kg payload! - New list price according to equipment: €31,050 net plus €190 COC paper/document - Despite our best efforts, errors within the advertisement cannot be excluded. Subject to errors and prior sale!

Condition: used, maximum load weight: 2,872 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 11/2023, Year of construction: 2023, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional vehicle transport. ALGEMA FITZEL Euro-Trans 35-22/48X, fully equipped: lift axle, pendulum axle, electric winch, 100 km/h road approval, one previous owner, used twice, no signs of use, as new condition. Gross weight: 3,500 kg Unladen weight: 628 kg X-Line pendulum axles with 100 km/h approval 1 lift axle 1 electric winch with cable remote control, optionally upgradable to radio remote control Tires: 195/50 R13C 104N M+S on alloy wheels Loading dimensions: 4,850 x 2,222 mm, loading height 660 mm Overall dimensions: 6,520 x 2,222 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable by shifting the center of gravity, with lowering and tilt damper • 2 extendable and infinitely laterally adjustable ALU loading ramps, with central locking, operable and lockable from both sides • 2 rubber buffers per loading ramp for secure locking when retracted • 1 adjustable ALU wheel chock bracket • Over 50 lashing points attachable on both sides for mandatory load securing • 1 certified load securing system according to TÜV certificate no. LS1206430Z1 • 2 x 13-pin cable connections, 1 m length, 12 Volt • 8 large rear lights including 2 reversing lights and 2 rear fog lamps • 2 rear marker lights, 4 amber side marker lights and 2 white front position lights for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support roller at the front allows easy single-axle maneuvering with rubber spring axle • Reflective side stripes (F-band) for your safety • 2 rear support rollers • 2 driving surfaces, 550 mm wide and ribbed for safe non-slip loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers for 100 km/h approval Special equipment: • Aluminum floor plate • Lift axle with automatic lowering when platform is unlocked • Hydraulic tilting mechanism • Electric winch with cable remote control, optionally with wireless remote control • Synthetic rope for winch • Remote control for electric winch • Power/battery supply for electric winch • Toolbox left and right • Side marker lighting • Anti-sway coupling • Theft protection lock Bwjdpfjzamrrox Afken - List price: €27,280 net plus €190 for COC documents - Although every effort is made to ensure accuracy, errors in the listing cannot be excluded. Subject to errors and prior sale!

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 Bwedexxvp Njpfx Afkjn – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: used, Year of construction: 1986, total width: 6,030 mm, Colour: Grey Bedpfxownhh Sj Afkewn Dimensions (LxW): 175 x 603 cm Four-sided planer Weinig Profimat 22N Serial number: 226 - 742 400v, 40Amp. Max working width 220mm Max working height 120mm Input table length 1950mm Throughput speed 4-20 m/min Spindle diameter 40mm Speed spindles 6000 U/min 1st spindle, bottom: kW 2nd & 3rd spindle, left & right: kW 4th spindle, top: kW Dimensions; 3400x1500x1400mm, Own weight 1600 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 226 - 742 - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1998, Bridgeport VMC1000 CNC Vertical Machining Centre (1998) Description: Type of CNC Heidenhain, Table Size: 1150 mm × 490 mm, X-Axis Travel: 1000 mm, Y-Axis Travel: 500 mm, Z-Axis Travel: 500 mm, Spindle Taper: BT 40, Spindle Speed: 8000 RPM, Number of tool pockets: 22 Bsdpfx Aoy Hx Igjfkswn

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 671 h, load capacity: 1,400 kg, lifting height: 5,400 mm, free lift: 1,745 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load center: 600 Mast type: Triplex Condition: Refurbished, no warranty Technical condition: good Front tire type: Vulkollan Bodjza I Dvjpfx Afkewn Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 345Ah Battery manufacturer: Stuba Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: Handover with a new FEM 4.004 inspection, including inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We will also be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded as of the listing date. Subject to prior sale, changes and errors. Initial lift,

Condition: used, Year of construction: 2018, with adapter plate Bwodoy Rvpcspfx Afken

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. Bwsdpfxevy Ihde Afkon number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Bjdpfoygv Shsx Afkjwn Stimin FUS-22-2M Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition.

Condition: good (used), Year of construction: 2020, operating hours: 22 h, Internal Article No.: 25019 Scrubber Dryer Bedjwq Nd Tspfx Afkswn Nilfisk BA 751 Serial No.: 3510172302 101 Year: approx. 2020 / 2021 (not visible) Only approx. 21.5 operating hours! The machine works perfectly and will continue to be used until sold. Therefore, additional operating hours may be added.

Condition: used, maximum load weight: 27,327 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 10/2026, loading space length: 13,320 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, loading space volume: 89 m³, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, 3-axle Schmitz SKO 24/L-13.4 FP 45 COOL Frigo VIN: 159666 Chassis / Components: * Air suspension // Raise + Lower Bodpfozbfqcex Afkown * Schmitz Rotos axles with disc brakes * Tires: 385/55 R22.5 * Remaining tread depth: Front approx. 50%, Middle approx. 50/40%, Rear approx. 40/10% * Pallet box * Jost support legs * Wabco Smartboard * Wabco Tailguard * Plastic diesel tank Body: * Frigo Schmitz * Schmitz cooler * Euro Scan printer * Flower width * Cooling unit: Schmitz * Aluminum floor * Mains operation * Dimensions: Length: 13.32 m, Width: 2.50 m, Height: 2.70 m * Approx. 89 m³, 33 pallet spaces * Double deck * 22 beams * Partition * Diesel hours: * Electric: 3 hours Weights: * Gross vehicle weight: 36,000 kg * Tare weight: 8,673 kg * Payload: 27,327 kg Other: * German vehicle * MOT 10/2026 – Inspection 04/2027 * 1 previous owner New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing & typographical errors, changes, prior sales, and errors; subject to change!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sales of new and used commercial vehicles. A wide range of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Temporary registration / export plates We will gladly assist you in obtaining export or short-term registration plates. Handling customs formalities We will gladly help you with handling customs matters.

Condition: used, maximum load weight: 27,327 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 10/2026, loading space length: 13,320 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, loading space volume: 89 m³, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, 3-axle Schmitz SKO 24/L-13.4 FP 45 COOL Frigo VIN: 159666 Chassis / Components: * Air suspension // Raise + Lower * Schmitz Rotos axles with disc brakes * Tires: 385/55 R22.5 * Remaining tread: Front: ~50% Middle: 50/40% Rear: 40/10% * Pallet box * Jost support legs * Wabco Smartboard * Wabco Tailguard * Plastic diesel tank Body: * Frigo Schmitz * Schmitz cooler * Euro Scan printer * Flower width * Cooling unit: Schmitz * Aluminum floor * Mains operation * Dimensions: Length: 13.32 m Width: 2.50 m Height: 2.70 m * Approx. 89 m³, 33 pallet spaces * Double-deck * 22 beams * Partition * Diesel hours: * Electric: 3 hrs. Weights: * Gross vehicle weight: 36,000 kg * Unladen weight: 8,673 kg * Payload: 27,327 kg Other: * German vehicle * MOT 10/2026 -- Inspection 04/2027 * 1 previous owner New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; a transfer of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles Bedpfszbfp Esx Afkown We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day licenses / export license plates We will gladly help you with the procurement of export license plates / short-term license plates. Processing of customs formalities We will gladly help you with the processing of customs matters.