Used Dry Board Sorting Line for sale (14,604)

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Bwedpfx Alsxazhtj Ijl

Condition: used, Year of construction: 1990, Manufacturer: SALICO S.P.A. Year: 1990 Thicknesses: 3-13.5mm Coil capacity: 25t Coil width:320-1250mm Direction: Left-Right Sizes of line: 17x13m Maximum external diameter: 2000mm Minimum external diameter: 700mm Minimum internal hole of coil:500mm Maximum internal hole of coils: 600mm Bedpeurlakefx Al Ijwl Knife diameters: Max 460, Min 410mm Absolute number of cuts 15 Number of cuts with maximum thcikness 13.5mm: 3 cuts for hard material, 5 cuts for mild material.

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Bsdeg Atrvepfx Al Iswl

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. Bedpfx Aoxp D D Nol Iowl It had been idle for the last year due to a change in the packaging process. The decision was made to sell it. If you have any questions, I will be happy to answer them.

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Width: 260 mm Bjdpfoymzzujx Al Ijwl

Condition: used, Year of construction: 1990, HEAVY DUTY ROLLFORMING LINE 11 STATIONS WIDTH: 450 mm Bwodjymzywopfx Al Isl

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS WIDTH: 450 mm Bedpfx Ajymzxyol Ijwl

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours Bjdpshmi Ucofx Al Iewl

Condition: refurbished (used), ROLLFORMING LINE Bedpfxjg Rkv Ee Al Iswl

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. Bwjdpfoq N U Duox Al Iol ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Bjdpjq Nx Aljfx Al Iowl Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR Bedethg Diepfx Al Ijwl HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll Bwodpotiy Ntsfx Al Iel 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | Bwjdpfx Ajq Nywxjl Iol | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Bwedpjyf A H Nofx Al Iel Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: Bwedpeq Nxrxjfx Al Ijl - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: used, Unused and never installed Steriline sterile vial filling line made in 2021 with an output capacity of 24,000 pieces/hour. Sale includes ancillary equipment as described in equipment list below. The line was designed to operate in ORABS (Open Restricted Access Barrier System) containment system and currently capable of filling into vial sizes 6R (5ml) and 2R (2ml) with lyo / injection stoppers or alu caps. (OEM can provide change parts for alternative sized vials and cap formats.) Major equipment includes: - Rotary washing machine RC-V8 - Depyrogenating tunnel ST9-CCS - Tray Loader / TL2 - (4) LAF (Laminar Air Flow) Units - Vial filling machine VFM400 + oRABS - Swing way belt SWB1 + oRABS - Positive diverting system PDS + oRABS - Vial capping machine VCM400 + oRABS - Swing way belt SWB2 - Connection belt LBT - Swing way belt SWB3 - Rotating table RT Ancillary equipment includes: - (2) Fedegari FOF4/9 autoclaves - Veolia Waters Orion 6000 E WPU production unit - Steris Finn Aqua Pure steam generator - Steris Finn Aqua multiple effect water still - Atlas Copco ZT37VSD WP air compressor - WFI 15,000 litre storage tank Bsdpjyhc Sqsfx Al Iewl - WPU 6000 litre storage tank - Main control cabinet - (2) Certuss steam generators - (2) Permak economiser and pump - Distribution system instruments (WPU, WFI, distribution system instruments, pipes, valves, pumps, etc.) - Clean room panels and ceilings - Daikin chiller Full design specifications available.

Condition: used, Used Framax glass bottle filling line with capacity approximately 2900 bottles / hour made in 2017 and used for approximately 2500 hours. Bsdpfx Aleyhc Rto Iowl Equipment includes isobaric bottling machine model Modulblock RFC1-16/16/1-DPS/C and also depalletiser, packer (box former, 24 bottles/box). Previously used for craft beer and RTD (Ready To Drink) carbonated pre-mixed alcoholic drinks. Equipment list and additional photos available on request.

Condition: excellent (used), This line was bought to produce protein bars for a sports nutrition business (under 900 hours). The machinery is in immaculate condition having only been used occasionally for their own production. PLEASE NOTE THAT THE VEMAG HP25E HAS BEEN REPLACED BY A NEWER HP20E FROM A DIFFERENT FACTORY. Bwsdpfsunm S Hox Al Iol

Condition: used, This line was filling trays of coleslaw and potato salad. 3 lane machine with 2 x 3 head depositors. Bodpfeqpd Svox Al Iswl

Condition: excellent (used), Year of construction: 2022, Ref: 11080 . 2022 Horizon CABS 4000-VF EVA Line Excellent Condition! Only 985,000 books produced! 'Computer Aided Binding System' designed for bind-on-demand production. ‘V’ = Variable, book on demand capability ‘F’ = Flap cover feeding capability Comprising: (2020) Tecnograf ‘MettaLibro’ Book block feeder SB-09VF Variable binder with hand feed station and 9 clamps LCD screen operator console for various functions/set-ups ‘PX-Core’ Central control computer system SI-15 book block sensor unit for auto system set-ups & quick book size/thickness make-ready S-09S Automatic feed unit Auto cover score & register settings from data input Milling & roughing station with DB-15 milling blower unit PM-20II EVA hot-melt pre-melt unit MU-09 EVA hot-melt spine glue unit with side glue discs Pile rotary grip cover feeder with double sheet detection LD-09 lay-down delivery belt PP-101 pre-stacking unit with approx. 9m conveyor to; HT-110 Automatic three knife trimmer HC-110 manual feed conveyor to use trimmer as standalone LCD screen operator console for various functions/set-ups Quick book size/thickness make-ready unit Dust bag extraction unit Roller delivery unit Including tools, accessories & manuals. Specification: Binder - book size: Max: 400 x 330mm (manual) Portrait Bwjdpsy Awcbofx Al Ijl Max: 330 x 250mm (auto) Min: 148 x 105mm Max: 330 x 320mm Landscape Min: 135 x 185mm Book thickness: 1 - 45mm Open cover size: Max: 400 x 660mm Min: 135 x 220mm Trimmer, book sizes: Max: 330 x 330mm untrimmed Max: 300 x 300mm trimmed Mechanical speed: Max: 4,000 cycles/hr. auto

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Bwsdpfjy Avl Isx Al Iol Dimensions: ca. 5000mm x 4000mm

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Bwjdex Dkk Sopfx Al Isl Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Bwsdpsy H I Ngsfx Al Isl • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory Bwodpfey H Dv Aox Al Isl • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)