Used Edel Werkzeugmaschinen Gmbh 6-Axis Machining Centre Mt for sale (119,992)

Condition: used, Year of construction: 2005, operating hours: 50,472 h, machine/vehicle number: 12332, Magnetic clamping plate approx. 1,200x600 mm, spindle speed: 8,000 rpm, travel paths X/Y/Z: 2 mm, control: HEIDENHAIN iTNC530, chip conveyor, operator terminal, coolant/lubricant belt filtration system, weight: 10,500 kg, without the hydraulic vise shown, without machining tools. Operating materials are included in the auction scope and must be taken or properly disposed of by the buyer. Kledpfx Amjyztgyj Eer

Condition: used, Year of construction: 2015, machine/vehicle number: 152121150, Travel paths X/Y/Z axis approx. 750/500/500 mm, BT 40 spindle taper, power: 12 kW, equipped with SIEMENS control, Sinumerik 828D, integrated tool changer, integrated chip conveyor, T-slot clamping table approx. 80x45 cm Kjdpsyztdxofx Am Eslr

Condition: good (used), mileage: 675,000 km, fuel type: diesel, Year of construction: 2019, Daf XF 530 - 6x2 - Machine Transporter / Low Loader Truck - 2019 - EURO 6 - 675,000 km - APK 1-27 - Hydraulic Ramps - Full Air Suspension - Lift Axle - Steering Axle - Automatic Length: Width: Height: Payload: 14,400 kg Klodpfxsyk U H So Am Ejr Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You can make a non-binding appointment for viewing and/or a test drive. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L Kledpfx Aoyybpmom Ejr High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Kedpfxjyz R Hdo Am Ejlr Year of manufacture: 2002 Number of controlled axes: 5 Portal construction TECHNICAL DATA Travels - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle – swivelling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Modifications and errors in the technical data and information excepted.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. Klodjyuw Srepfx Am Eor · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm Kledpfox Hllxox Am Eor - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: used, machine/vehicle number: WDB9630031L743748, mileage: 231,482 km, power: 175 kW (237.93 HP), first registration: 04/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 10,350 mm, total width: 2,590 mm, loading space length: 8,040 mm, loading space width: 2,440 mm, loading space height: 2,530 mm, Year of construction: 2013, Tail lift: BAR CARGOLIFT, tail lift WDB9630031L743748 Cool unit brand: Carrier = More information = Number of cylinders: 6 Engine capacity: 7.698 cc Empty weight: 10.720 kg Kjdpfsymqy Hox Am Eelr Carrying capacity: 8.280 kg GVW: 19.000 kg Cooling engine: diesel and electric Registration number: 91-BBS-1 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control: Siemens SL Tool positions: 160 Kedpfx Amey Ap Eus Eolr Tool holder: HSK 63 Spindle speed: 10,000 min⁻¹ / 242N Pallet size: 630×500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Max. table load: 1000 kg

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: NC 1487, functionality: fully functional, operating hours: 2,500 h, travel distance X-axis: 4,850 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 880 mm, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 500 mm, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: OSAI, table length: 4,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, We are offering this very well-maintained COSMEC 515 Conquest 5-axis machining centre, year of manufacture 2021. Manufacturer: COSMEC Model: 515 Conquest Year: 2021 Condition: Very good Machine type: 5-axis machining centre Vacuum grid table Vacuum pump 250m³/h 5-axis fork head, 18kW spindle, liquid cooling, HSK63F C-axis +/-360 degrees Tilting axis +/- 110 degrees Klsdpfxoynhn De Am Eor Spindle speed: 500–24,000 rpm NC-controlled extraction hood Two 12-position tool changers, travelling in X and Y Automatic tool length measurement Bumper safety system Compressed air requirement: 7 bar Control cabinet with air conditioning unit Mobile control panel Centralised lubrication Rental within Germany available through us. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1970, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm Kljdpfsywzhqex Am Ejr -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Kljdpfoyzyrvox Am Ejr Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 Klsdpfxjyzza Io Am Eer tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: used, Year of construction: 2017, x-travel 620 mm y-travel 520 mm z-travel 460 mm CNC-control iTNC 640 HEIDENHAIN Kodpfx Amjp S Db Se Eslr Table dimensions Ø 650 mm max. table load 300 kg spindle taper SK 40 spindle turning speed range 12.000 U/min feed range 1 - 20.000 mm/min rapid traverse 36 m/min coolant IKZ 30 bar voltage 400 V total power requirement 25 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 2,35 x 4,15 x 2,95 m chip conveyor 2,60 x 1,65 x 1,20 m Oil cooler 0,50 x 0,70 x 1,45 m water cooling unit 0,70 x 0,70 x 0,80 m - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor - suction

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar Ksdpfxjxap Eas Am Eolr voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: good (used), Year of construction: 2013, If some parts shown by hand, that parts not come with machine. Technical data shown on picture. Kljdoy Awxpspfx Am Eer

Condition: excellent (used), CATALOG NUMBER 7968 TECHNICAL DATA - Max blade diameter: 450mm - Blade bore diameter: 30mm - Max size of cut blocks (length/width/height): 150x90mm - Material feeding type: rotary/carousel conveyor Kedpfx Amey D I Rxe Eslr - Number of working stations: 6 pcs (adjustable to the size of the timber being cut) - Stepless feed speed adjustment of the conveyor via frequency inverter - Block size adjustment - Automatic - Total power: 6.25kW - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1800x1750x2100mm - Weight: approx. 500kg ADVANTAGES – Carousel-type – Very good condition – Used machine Net price: 14,900 PLN Net price: 3,550 EUR (based on exchange rate 4.2 EUR) (Prices may fluctuate with major currency changes)

Condition: used, Year of construction: 2012, x-travel 0760 mm y-travel 845 mm z-travel 760 mm Control 840DI Siemens table-size 500 x 500 mm feed 0- 60 m/min workpiece weight max. 350 kg type of pallet-changer 2 St. milling head speed 12000 U/min numbers of tools in magazin 320 tool taper 63 HSK A- axe (swivel) 30- 120 ° B- axe (turning) 360 ° total power requirement 83 kW weight of the machine ca. 15 t dimensions of the machine ca. 6 x 4 x 2,5 m 5 axes machining center with swivable and turnable table. Coontrol Siemens 840 DI. Machine will be supplied with many spare parts. Machine has cooling Kedpfx Amjywntgs Eelr through spindle ans dust exhaust.

Condition: new, Year of construction: 2022, Demonstration machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner Uninterruptible power supply (UPS) Quattro-HSK package incl. 4-position tool changer XL drilling head Double drill spindle in Y-axis Automatic central lubrication Availability: short notice Klodpfx Amjwt E Tvs Eer Location: Flörsheim

Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other high-precision and complex 3D parts. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the powerful machine body and rotary table will give you the best quality. With the easy use of the fixture, you can save time. No maintenance and service is required thanks to components from well-known manufacturers and high quality materials. High quality 3D cutting can be achieved. With this technology, you have less energy consumption and can increase your business profit. The machine impresses with its speed, reliability and design. HD-FA Technical Data Available in 2,3 and 4 kW X axis: 3,000 mm Y axis: 1.500 mm Z axis: 650 mm B axis: ±135° C axis: ±360°xn Maximum vector speed: 173 m/min. Maximum vector acceleration: 1.73 G Tolerance positioning: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6168 mm x 3936 mm h= 3700 mm working area: 9.000 mm x 10.000 mm (safe area) Distance of the turntable door: 4.000 mm Ksdpfeg Adknsx Am Eelr machine weight: 16.000 kg Cutting head: Type: 3D Focus type: Automatic Control unit: CNC Siemens Sinumerik 840D SK Screen: 19 inch touch screen Filter Capacity: 2.500 m³/h - 4 kW

Condition: used, Emmegi machining centre for aluminium. Functional. Kljdpfx Amsyy Ilne Eor

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Ksdjuu Rthopfx Am Eolr Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Kljdpoytc Nmjfx Am Esr Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper CAT 40 Spindle speed 18.000 1/Min Spindle motor 30/22 kW Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Kodpfxsytb Syo Am Eelr Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: Ksdpfx Aotqfv Iom Eolr - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017