Used Edelhoff Punching Press Darr W2/320 Tons for sale (19,383)

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Rodoxaaipspfx Ai Hou range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 Rjdpshlnzkofx Ai Hju - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Rsdek S Htxspfx Ai Hsu Weight: 4.5 tons In good condition

Condition: excellent (used), Year of construction: 2002, Manufacturer: ARISA Type: S-2-630-350-FS Pressing force: 6,300 kN Table size: 3,500 x 1,450 mm Ram size: 3,500 x 1,400 mm Stroke adjustment: 25–300 mm Installation height: 700 mm Ram adjustment: 300 mm Strokes per minute: 20–70 Control system: SIEMENS S7 Including DIMECO coil line Rsdpfoyx S Iwex Ai Hou

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm total power requirement 7,5 kW machine weight ab. 1700 kg Rodpfxoyv Nvae Ai Hsu dimensions 1500 x 650 x 1700 mm

Condition: used, pressure 40 t throat 175 mm work height max. 1055 mm stroke 30 mm Redpfx Ajyv Nuisi Hsu sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2006, Pressing force 100 t diameter 40 mm throat 760 mm total power requirement 8,5 kW Redpfx Aioyv Nrze Hju weight 3.600 kg Accessories / equipment: - punching table

Condition: used, Year of construction: 2000, pressure 100 t throat 620 mm Redpfx Aioyv Ncye Hou stroke 0-100 mm hole diameter in sheet thickness 40 in 20 mm no. of strokes 49 Hub/min total power requirement 15 kW weight of the machine ca. 3.500 kg

Condition: new, Year of construction: 2025, total height: 3,700 mm, ram adjustment: 150 mm, installation height: 650 mm, table height: 854 mm, total width: 2,479 mm, total length: 4,186 mm, table length: 2,000 mm, table width: 1,200 mm, conveyor belt width: 350 mm, pressing force: 250 t, stroke length: 250 mm, distance between side stands: 920 mm, distance between stands: 2,040 mm, overall weight: 31,000 kg, control voltage: 24 V, Standardized 250-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. For technical specifications and available accessories, see PDF documents. Rsdpfxowb Dh Ie Ai Hsu Delivery time: 6 months

Condition: new, Year of construction: 2025, total height: 5,150 mm, ram adjustment: 200 mm, installation height: 750 mm, table height: 1,117 mm, total width: 2,600 mm, total length: 4,000 mm, table length: 2,500 mm, table width: 1,300 mm, conveyor belt width: 430 mm, pressing force: 315 t, stroke length: 300 mm, distance between side stands: 850 mm, distance between stands: 2,580 mm, overall weight: 54,000 kg, control voltage: 24 V, Standardized 315-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. For technical specifications, see PDF document. Delivery time: 6 months Rjdpjwc A Ebjfx Ai Hsu

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Rsdpfx Aouk I Nxji Hou

Condition: excellent (used), functionality: fully functional, overall weight: 800 kg, Year of construction: 1995, pressing force: 10 t, operating speed: 260 mm/s, stroke length: 200 mm, table length: 440 mm, table width: 430 mm, type of input current: AC, Equipment: safety light barrier, Manufacturer JAM Model HYP-1000 Model year 1995 Capacity 98KN (10t) Stroke 200mm Nyitott magasság: 395mm asztal méret 440 × 430mm Shock hole φ32 × 60L mm ram aproaching speed:260 mm/s ram pressure speed:19 mm/s ram return speed: 219mm/s With light safety device voltage 3-phase 200v 1,5kw Rodpfx Aiewcqc Uo Hou press body mass: 800kg operation oil: 43liter ​ Height (mm) 1395 Width (mm) 700 Depth (mm) 1170

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Rodpfx Ajy Ampdsi Hju Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Rsdodzqmzjpfx Ai Hju Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm Rjdpfx Aieh U Dtuo Hsu - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm Rjdpfxefim Ths Ai Hsu ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: good (used), Year of construction: 1952, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm Rjdpfeb A Hwhox Ai Hou

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool Rodpfx Aioxld R Is Hju

Condition: new, punching pressure 28.0 t Rsdpfxsw U U S Ne Ai Hju punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 Rsdpfx Asx U A H Nei Heu +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. Redpfoxabrfex Ai Heu range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: used, Year of construction: 1991, pressure 70.0 t punching cross-cut in cmm 27 in 20 mm punching cross-cut in cmm 32 in 14 mm work height max. 1060 mm column arm 500 mm weight of the machine ca. 1500 kg. total power requirement 7.0 kW range L-W-H 1550 x 1200 x 1950 mm good / well-maintained condition (!!) New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment Rodpfoxabu Tex Ai Hou - die base - 1x freely movable foot switch - operating instructions (PDF)

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm Rsdoigwdwspfx Ai Hou -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg Rsdei Agynspfx Ai Hsu

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm Redpfx Aioik Sl Hs Hsu -Weight: 3145 kg