Used Elma-Tech Welding Unit for sale (38,841)

Condition: used, Technical details: power consumption: 20 - 300 A welding current: U1 = 380 V connected load: 14 kVA weight of the machine approx.: 171 kg dimensions of machine: 0,9, x 0,5 x 0,92 m Transformer - Welding machine - Welding transformer Control: 14 levels for thin sheet metal and 14 levels for thick sheet metal Ndedpfx Aou Nwgrsh Sec air-cooled Protection class P 21 with electric welding gun with cable approx. 6.0 meters Ground clamp and earth cable approx. 4.0 meters *

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Njdpjz N Am Uofx Ah Sjdc Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Ndjdpfx Asg D H Rush Sjc Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, Year of construction: 2006, Technical details: power consumption: 30 / 15,5 350 / 31,5 A welding current: Gleichstrom V open-circuit voltage: 15,5 - 41,0 V total power requirement: 16 kVA kw weight of the machine approx.: 125 kg dimensions of machine: L: 1,05 x B: 0,5 x H: 0,70 m Compact welding machine - Welding rectifier with integrated wire feeder -MIG MAG -Connected load 9.7 kVA -2-stroke; 4-stroke; spot; interval Njdsu Nwgfepfx Ah Ssdc -Cooling type AF -Protection class IP 23 -Insulation class H -Welding torch and earth cable *

Condition: used, Technical details: welding current: 330A / 50% bis 210A / 100% protection class: IP23 total power requirement: 13,8 kVA weight of the machine approx.: 71 kg dimensions of machine: 0,95 x 0,60 x 0,90 m - MIG / MAG / MIG and electrode - cooling method water-cooled AF - insulation class B - power range 3A / 20V to 330A / 34V Ndjdpfx Aou Nwb Noh Sec - Draht Ø bis 1,6mm Equipment: - cooling unit Control via robot interface *

Condition: excellent (used), Year of construction: 2011, Control system: Siemens Sinumerik 828D Travel ranges X/Y/Z: 1020 x 560 x 510 mm Spindle speed: 8000 min-1 Tool magazine for 24 tools, SK 40 Internal coolant system Ndjdpozkwb Rofx Ah Soc Chip conveyor

Condition: excellent (used), Year of construction: 2019, 2 units in stock, both were only in use for a short contract. Loading basket 1600mm by 800mm Programmable controls. Nsdpfxjramams Ah Ssdc

Condition: used, Harms Wende Welding Technology HWG2708SK-01 HW2000 Control Manufacturer: Harms Wende Njdpfxexl D Ige Ah Sodc Product Area: Welding Technology Type Designation: HWG2708SK-01 Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug - 5 meter WIG hose assembly - HF ignition - Continuous current control and current increase - Connection for electrode welding Nedsdzqbvopfx Ah Sodc - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Weight: approx. 200 kg In good condition

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, UNITECH designs and manufactures pneumohydraulic presses with nominal pressing forces from 10 to 600 kN, available in C-frame, two-column (two-post) and four-column (four-post) designs. The advertised price of EUR 4,000 net (excluding VAT) applies exclusively to the basic 10 kN model. All other press models and equipment configurations are quoted individually according to the required pressing force, frame design, stroke lengths, working area, control system and safety equipment. This listing covers the complete UNITECH range of new pneumohydraulic presses for industrial assembly and production applications. Each press can be configured to suit the workpiece, tooling and intended manufacturing process. TECHNICAL RANGE Nominal pressing forces: – 10, 30, 50, 100, 150, 200, 300, 400 and 600 kN Available frame designs: – C-frame – Two-column (two-post) – Four-column (four-post) Stroke ranges: – Power stroke: 5–20 mm – Total ram stroke: 50–250 mm Ndjdsv Snixspfx Ah Sec The available combinations of pressing force, frame design and stroke lengths depend on the selected configuration and application. OPERATING PRINCIPLE The pneumohydraulic drive combines a fast pneumatic approach stroke with a short, hydraulically intensified power stroke. The full pressing force is generated only during the working phase of the cycle, providing an efficient solution for industrial pressing and assembly operations. TYPICAL APPLICATIONS Subject to the selected configuration, tooling and process-specific risk assessment, the presses can be used for: – Press-fitting and component assembly – Inserting bearings and bushings – Riveting and crimping – Punching and marking – Bending and forming – Straightening and calibration CUSTOM CONFIGURATION The following parameters and equipment can be adapted to the intended application: – Nominal pressing force – Frame design – Working area and installation dimensions – Power stroke and total ram stroke – Tool and workpiece mounting – Control system and operating sequence – Application-specific guards and safety equipment – Integration with production lines and auxiliary equipment DOCUMENTATION, ACCEPTANCE AND DELIVERY Complete machines are supplied with CE marking, an EU Declaration of Conformity and operating instructions in the agreed language: Polish, English or German. A Factory Acceptance Test (FAT) is carried out prior to dispatch. The presses are covered by a 12-month warranty. Standard delivery terms are FCA UNITECH, Zawiercie, Poland (Incoterms 2020). REQUEST FOR QUOTATION To receive a technical proposal and quotation, please provide: – Required pressing force – Preferred frame design – Workpiece and tooling dimensions – Required working height and working area – Required power stroke and total ram stroke – Description of the manufacturing process – Required control and safety equipment – Expected cycle time or production rate The photographs show examples of UNITECH press configurations and may include optional equipment. The final technical specification, price and delivery time depend on the selected configuration.

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Colour: blue, RAL5010 Njdpfjy Sbc Rox Ah Sjdc Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Condition: ready for operation (used), Year of construction: 2001, consisting of - rotary/swivel device Motoman Robotec, year of manufacture 2001 - 2 welding robots Motoman Robotec - 2 torch cleaning devices - 2 welding transformers Leipold LSQ4 - 2 wire feeders - 2 recirculating air cooling units EWM UK500 and UK500R - control system Motoman Robotec XRC - 2 control systems Leipold Multiprocess-Q8P - control system Siemens Simatic HMI / Simatic OP17 - widescreen TFT monitor HP, 23 inches Further information can be found under "Visit Auction". Nedpfo Afdm Tex Ah Ssdc

Condition: new, mileage: 15 km, power: 129 kW (175.39 HP), first registration: 04/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Equipment: ABS, air conditioning, cruise control, retarder, = Additional Options and Accessories = - Air conditioning for the driver - Air conditioning system = Further Information = Damage: none Nedpfx Ahey Eduis Ssdc = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: X-tra 550 HI, total width: 495 mm, total length: 620 mm, total height: 570 mm, maximum load weight: 10 kg, heating capacity: 3,000 kW (4,078.86 HP), tank capacity: 45 l, type of input current: three-phase, inner dimension height: 350 mm, inner dimension length: 500 mm, inner dimension width: 300 mm, overall weight: 35 kg, input voltage: 400,208 V, input frequency: 5,060 Hz, year of last overhaul: 2026, • Ultrasonic cleaning unit Elma X-tra 550 HI See data sheet in the appendix 1 unit • Rinsing basin X-tra 550 HI SW See data sheet in the appendix 1 unit (one of which currently has a defective heating element) • Drying basin X-tra 550 WLT Ndedpfx Ahjz Tlals Sec See data sheet in the appendix 1 unit Condition: used – fully functional – the units have been cleaned and their functionality checked by the maintenance department Year of manufacture: 2005 I am available for further information.

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 4,000 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, spindle motor power: 3,700 W, number of axes: 4, This 4-axis Quick-Tech XTS-42 CNC Lathe was manufactured in 2013. It features a twin-spindle configuration with a maximum machining length of 350 mm on the main spindle and a turning diameter of 100 mm on the sub-spindle. The machine is equipped with a Mitsubishi M70 control and has a bar capacity of 42 mm. If you are looking to get high-quality turning capabilities, consider the Quick-Tech XTS-42 machine we have for sale. Contact us for further details. • Number of spindles: 2 • Spindle motor power: Main spindle: 7.5 kW; Sub-spindle: 3.7 kW • Spindle bore: Main spindle: 44 mm; Sub-spindle: 30 mmMovement • B-Axis: Present, according to seller description • Others: Z1-axis: 470 mmExtra Information • Bar capacity: 42 mm • Main spindle max. machining length: 350 mm • Main spindle chuck: Patron KK5-173E/42B • Main spindle nose: ISO A2-5 • Sub-spindle bar capacity: 42 mm • Sub-spindle max. machining length: 155 mm • Sub-spindle max. turning diameter: 100 mm • Sub-spindle chuck: Patron KK5-173E/42B • Sub-spindle nose: ISO A2-5 • X / Y / Z / Z1 servo motors: Mitsubishi, 1 kW • Technical specification available as attachment • Seller asking / expected SEP: EUR 28,000 • Preliminary evaluation requested • Still missing / useful to request before publication: Serial number • Still missing / useful to request before publication: Exact machine location • Still missing / useful to request before publication: Operating hours / spindle hours • Still missing / useful to request before publication: Confirmation machine is fully operational • Still missing / useful to request before publication: Whether machine is under power and can be demonstrated • Still missing / useful to request before publication: Number of axes / exact B-axis configuration • Still missing / useful to request before publication: Driven tools / live tooling • Still missing / useful to request before publication: Tooling configuration / number of tool stations • Still missing / useful to request before publication: Bar feeder included or not • Still missing / useful to request before publication: Chip conveyor • Still missing / useful to request before publication: Additional accessories • Still missing / useful to request before publication: Recent photos • Still missing / useful to request before publication: Nameplate photo • Still missing / useful to request before publication: Video under power • Still missing / useful to request before publication: Maintenance / repair history • Still missing / useful to request before publication: Any active alarms or known technical issues Ndodpfx Aho Afi E Ie Soc Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type Ndedsdzqb Espfx Ah Sjc WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Nsdpfx Ahon Sl D Ro Ssdc

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21220, overall weight: 8,600 kg, total width: 4,000 mm, total height: 3,100 mm, total length: 9,400 mm, load capacity: 180 kg, The system consists of the following components: - YASKAWA Positioner V2-500D3 (Year of manufacture 2022, 466843-1-1) - LASO WP-SLK welding cell - YASKAWA GP180 industrial robot (Year of manufacture 2022, Serial no.: 6V22Y2842450001) - NIMAK multiCONTROL control cabinet with Bosch Rexroth PRC7300 (Year of manufacture 2023, Serial no.: 7261404217680) - RSP tool changer system - NIMAK spot welding gun LRN 300-650-R54-175-150-P2U-WR (Year of manufacture 2023, Machine no.: 2212–2129 N) - NIMAK spot welding gun CRN 300-650-R54-200-P2U-WL (Year of manufacture 2023, Machine no.: 2212–2128 N) - Weld gun cleaning station TECHNICAL DETAILS Nedpfx Ajyft Eveh Sodc Positioner control: LASO industrial PC / Siemens S7 Payload Yaskawa GP 180: 180 kg Net weight Yaskawa GP 180: 1,020 kg Yaskawa GP 180 controller: YRC1000 Yaskawa GP 180 teach pendant: +RM1 Rotary brush cleaning station: 2 pcs. 180 x 150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,400 x 4,000 x 3,100 mm Total weight: 8,600 kg Type of input power: Alternating current (AC) Input voltage: 400 V Rated power: 138 kVA at 100% duty cycle Rated voltage: 400 V / 3 Ph / 50 Hz Cooling type: Water EQUIPMENT Servo rotary axis Swivel unit Penlink rotary unit LASO industrial PC / Siemens S7 controller Integrated pneumatic, coolant, and signal feedthroughs Safety enclosure

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, grinding length: 1,600 mm, grinding width: 500 mm, workpiece weight (max.): 900 kg, grinding wheel diameter: 355 mm, rapid traverse X-axis: 1 m/min, travel speed (max.): 25 mm/min, TECHNICAL DETAILS Table size: 500 x 1,600 mm Max. grinding area: 500 x 1,600 mm Max. distance from spindle center to worktable: 600 mm Load capacity (with magnetic chuck): 900 kg Axis parameters Longitudinal feed speed: 5–25 m/min Cross rapid traverse (X-axis): 50–1,000 mm/min Cross feed, incremental: 1–20 mm/stroke Cross hand feed (MPG): 0.005 mm/click Vertical rapid traverse (Z-axis): 50–500 mm/min Vertical automatic feed: 0.005–0.04 mm/stroke Vertical hand feed (MPG): 0.005 mm/click Grinding wheel Dimensions (outside diameter x width x bore): 355 x 20~50 x 127 mm Spindle speed: 1,440 rpm Drive capacities Spindle motor: 7.5 kW Hydraulic pump motor: 3 kW Servo motor, cross feed: 0.5 kW Servo motor, vertical feed: 2 kW Coolant pump: 0.125 kW Lubrication pump: 0.06 kW Total connected load: 14 kVA MACHINE DETAILS Dimensions & weight Required installation space: 7,120 x 2,550 mm Height: 2,700 mm Machine weight: approx. 6,000 kg EQUIPMENT PLC + HMI automatic grinding control Integrated control for magnetic chuck Coolant tank Balancing arbor Njdoyymkcjpfx Ah Sodc Grinding wheel flange and puller Wheel dresser stand MPG handwheels for Y/Z axis Operating manual Splash guard Standard grinding wheel Levelling wedges and bolts

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Ndedpfx Ahshxvu Es Sjc Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,159 h, spindle motor power: 7,500 W, spindle speed (max.): 6,000 rpm, overall weight: 4,200 kg, total width: 1,900 mm, total height: 1,900 mm, bar diameter (max.): 100 mm, travel distance X-axis: 150 mm, travel distance Y-axis: 385 mm, controller manufacturer: MITSUBISHI, product length (max.): 3,500 mm, number of axes: 7, This 7-axis Quick-Tech I-42U was manufactured in 2015. It features a maximum bar diameter of 42 mm and a maximum machining length of 250 mm. The machine is equipped with a powerful spindle speed of 6000 rpm and includes an automatic bar feeder. If you are looking to get high-quality turning capabilities, consider the Quick-Tech I-42U swiss type turning machine we have for sale. Contact us for further details. • Control • Mitsubishi M720 CNC • 15" color LCD display • Door with LED indicators • Operational signaling and automatic alarm switch • Built-in communication/interface with bar feeder • CE mark • Guide/manual • Main spindle • Bearing diameter: 100.0 mm • Max bar dia.: 42 mm • Max machining length: 250.0 mm • Collet: DIN-173E42B • Spindle nose: A2-5 • Spindle bore: 44.0 mm • C axis: 0.001° • Counter spindle • Max bar dia.: 42 mm • Max machining length: 100 mm • Collet: DIN-173E-42B • Spindle nose: A2-5 • Speed: 4000 rpm • Power: 3.7 kW • C1 axis: 0.001° • Travels and axes • X: 150.0 mm | Y: 385.0 mm | Z: 250.0 mm | B: 360° • X1: 400.0 mm | Y1: 400.0 mm | Z1: 300.0 mm • Servo motors (X, Y, Z, X1, Y1, Z1): Mitsubishi AC Servo, 1.5 kW each • Indexing from tool position: 0.3 s • Tool change time (cut/cut): 0.6 s • Tool head (main) • Combined type • Tools: 6 external, 5 internal • External tool size: 20.0 × 20.0 mm • Max internal tool: ER20 / 20.0 mm • Driven tools (main) • B axis with 12 driven tools • Power: Mitsubishi AC Servo, 15 kW • Speed: 4000 rpm • Max tool size: ER-20 • Max drilling dia.: 12 mm • Max thread: M10 × 1.5 • Tool head (counter) • Combined type • Tools: 5 external, 9 internal • External tool size: 20.0 × 20.0 mm • Max internal tool: ER20 / 20.0 mm • Driven tools (counter) • Number: 6 (3 axial, 3 radial) • Power: Mitsubishi AC Servo, 1.5 kW • Speed: 4000 rpm • Max tool size: ER-20 • Max drilling dia.: 12 mm • Max thread: M10 × 1.5 • Hydraulic system • Hydraulic motor: 0.75 kW • Max system pressure: 50 kg/cm3 • Lubrication system • Lubrication motor: 25 W • Tank capacity: 2 l • Cooling system • Coolant tank: 200 l • Coolant motor: 1/4 HP • Coolant pressure: 2.5 MPa • Length: 2900 mm (3500 mm including chip conveyor, which is part of the machine) • Standard equipment included • Basic equipment with tools • Tool holder and collet set • Automatic lubrication • Chip remover/chip conveyor (integrated, per dimensions note) • Workpiece removal (shovel) – if integrated • 15" color LCD display • Operational signaling and automatic alarm switch • Guide/manual • Door with LED indicators Additional equipment Ndjdpfx Aozcwxnjh Sec • Automatic bar feeder, 1200 mm length • Workpiece removal conveyor • Workpiece removal shovel (if provided as an external unit) • Transformer 380–440 V, 60/50 Hz Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Ndedpj Adl Hrefx Ah Soc

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed Ndsdpfx Ahswzv D Ie Soc - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Njdpfodzqa Hex Ah Sjdc Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Ndedpfxoztn Dzj Ah Sjc Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.