Used Farman Fc 250 W for sale (37,720)

Condition: ready for operation (used), GMN TSE 75cdu x 250/15000 high-speed spindle, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lhsdpfx Ansi Eabgexel

Condition: repair required (used), Machine number: 1464 Type / Model: FUW 250/IV Travel ranges x-y-z: 400 - 220 - 400 mm Table: 630 x 350 mm Table clamping area: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle connection: SK 40 Feed rate range, longitudinal: 6.3 to 1,250 mm/min Feed rate range, transverse: 6.3 to 1,250 mm/min Power consumption: 7.4 kW Accessories / Equipment: Vertical head Lhsdpfx Anjd Hl Stexel Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Year of construction: 2017, condition: used, Used overhead crane system with vacuum lifting device Year of manufacture: 2017 Load capacity: 250 kg (at the lifting device) Crane travel: 6 m Bridge: 6 m Vacuum lifting device B 3 UW H K 250 V with 2 oval suction cups 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely variable Operation via special handle on the vacuum lifting device. The lifting movement is controlled infinitely variable via a frequency converter. Availability: short notice Storage location: Flörsheim Lhjdozc Agdopfx Anxol

Condition: new, mileage: 100 km, power: 471 kW (640.38 HP), fuel type: diesel, overall weight: 42,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, Additional features: MAN TipMatic 12.30 OD gearbox with WSK 440 and retarder Rear axles 16 t, with longitudinal and transverse differential locks Ljdsztuc Rjpfx Anxjhl Rear leaf springs 16 t Front axle 9.5 t Front lift axle 8.0 t, steerable Coupling plate at the front Rear trailer coupling 56 E Rockinger 100 t 3-stage hydraulic system for low-bed trailers, with additional connections at the front and rear EVHD 800 sliding mechanism JSK 38 3.5-inch fifth wheel coupling Rear support plate Complete LED headlights Rotating beacon Work lights Complete leather seats Leather steering wheel Hot water heating system Air conditioning Navigation system Refrigerator

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm Lhjdpfjv U Un Hsx Anxel hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Ljdjv A Uw Depfx Anxehl Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, mileage: 504,000 km, power: 188 kW (255.61 HP), first registration: 07/2014, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 58 m³, loading space length: 8,450 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, tail-lift, Volvo FL 250 Box Van with Roll-Up Door, Tail Lift, Euro 6 For inquiries: 0226147 * Power: 188 kW / 250 hp * Displacement: 7,698 cc * ABS * EBS * Differential lock, rear axle * AdBlue tank, right side Lsdpfxezb Skvo Anxjhl * Air-suspended comfort driver's seat * Manual roof hatch * Air conditioning * Electric windows, driver/passenger side * Electrically heated and adjustable mirrors * CD radio / AUX / USB Tail lift: Dhollandia Load capacity: 1,500 kg Body: Box van * Roll-up door * Wooden wear-resistant floor * Rub rails, left/right Dimensions (loading space/loading area) Loading space length: 8,450 mm Loading space width: 2,500 mm Loading space height: 2,700 mm Tires: 1st axle: 285 / 70 R 19.5, leaf-sprung / 35% 2nd axle: 285 / 70 R 19.5, air-sprung / 35% ----Price: €12,900 + 19% VAT For further questions, you can reach us on the following telephone numbers: We speak: German, English, French, and…? Typographical errors, errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial Lodsy N Spcspfx Anxjhl • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, Further information: * Unladen weight: 6,090 kg * Tyre size | Front axle: 445/45 R19.5 Lsdsynxbbopfx Anxohl * Tread depth inner left | Front axle: 40% * Tread depth inner right | Front axle: 40% * Maximum axle load | Front axle: 9,000 kg * Tyre size | Second axle: 445/45 R19.5 * Tread depth inner left | Second axle: 40% * Tread depth inner right | Second axle: 40% * Maximum axle load | Second axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Lifting capacity: 2,000 kg * Price on request: Yes * Position | Front axle: Rear * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Position | Second axle: Rear * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Tail lift | Type: Tuck-away and slide tail lift Additional features: * Rear doors * Homepage * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale and errors excepted

Year of construction: 2024, condition: used, New: Yes Power: 33 kW (45 HP) Lhsdpfx Anox S N Unexol

Condition: good (used), Manufacturer: John Scheer Meuselwitz Machine number: 6815.17 Type / Model: SFW 250 Table: mm Sanding area: 1,000 x 250 mm Magnet: 1,000 x 250 mm Grinding wheels: mm Table speed: m/min Table spindle center max.: mm max. sanding height: mm Connection: 10.5 kW Accessories/equipment: Electromagnet Lodsrrdtxjpfx Anxshl Condition: good Weight: 5 tons Dimensions: mm

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system Control system expansion possible as an option 2 identical machines available External dimensions: Overall height 4730 mm Overall width 3270 mm Overall depth 1680 mm 29 supports for 250 kg payload each in the clear internal dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 load levels, allowing for a 160 kg payload per usable level Intermediate shelves can be manufactured on request Deposit table at a height of 900 mm above floor level - work surface with V2A stainless steel cover Color: Gray / Gray Surface cleaned, signs of use possible Motor power, drive: 2 x 1.5 kW / 400 Volt Ledsdnhz Uspfx Anxjhl Subject to errors and technical changes as well as minor deviations in the photos Delivery & installation currently mainly in Germany, Austria and other neighboring countries.

Condition: refurbished (used), DL Packaging – Complete Powder Packaging Lines We build and install cost-efficient, hygienic, and accurate powder packaging lines. Our Second Life Machines offer the performance of new equipment at a fraction of the cost and with fast delivery. Why choose our powder solutions? • High automation for maximum output and minimal labor • High filling accuracy with sensors that adapt to product and environment • Easy access & fast cleaning for minimal downtime • Strong technical support and durable wear parts Lhedox Dbq Aspfx Anxol Complete lines include: • SDX dosing system with custom auger screw • VFFS machine (pillow, block-bottom, doypack, stabilo bags) • Discharge conveyor, Turntables, • Cartoning/ Case packer solutions Suitable for powders from 5–30 kg (milk, coffee, spices, sugar, chemicals) with speeds up to 100 bags/min. DL Packaging – Reliable, hygienic and affordable powder packaging from A to Z.

Condition: refurbished (used), Year of construction: 2021, Project-related overhaul completed in 2020–2021. Originally built in 1991 and fully refurbished by DL Packaging in 2021. Now available again! Since the refurbishment, the machine has operated for only approx. 150 hours – available immediately. Included: FS 110 forming set for pillow bags, 110 mm width FS 180 forming set for pillow bags, 180 mm width Markem X65 TTO printer Lhjdpfx Anjx Dapwsxel The machine can produce both pillow bags and block-bottom bags. Includes SDX, printer, and forming sets. Capacity: 50–80 bags/min, depending on bag format, film thickness, filling product, dosing system, and synchronization. Delivery time: On request. If you are interested in this machine, it will be modernized by DL Packaging according to your product and specific requirements.

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 400 V, overall weight: 1,530 kg, SIEMENS 250 kW, IE4 efficiency class Ljdjzr Ihwopfx Anxehl 12-month warranty

Condition: excellent (used), The WALTER WD 250/350 twin-spindle multi-blade saw is equipped with two independent spindles with power ratings of 30 kW and 37 kW. The machine is in perfect technical and visual condition, fully functional, and ready for immediate operation without any additional financial investment. Its robust construction and powerful drive units guarantee high performance, cutting precision, and reliability during multi-shift operation. The WD 250/350 model is designed for longitudinal cutting of solid wood and wood-based materials. Thanks to the use of two saw arbors and an advanced feed system, it ensures stable material guidance and high quality of the processed components. TECHNICAL DATA: * Manufacturer: WALTER * Model: WD 250/350 * Type: Twin-spindle multi-blade saw Processing parameters: * Maximum cutting height: 170 mm * Maximum cutting width: 350 mm * Diameter of saw blades: 300 mm * Spindle diameter: 2 × 70 mm Drives: * Lower spindle motor: 30 kW * Upper spindle motor: 37 kW * Feed motor: 1.5 kW Feed system: * 7 lower pull rollers * 2 upper toothed pull rollers * Length of infeed table: 3000 mm Chip extraction: * Extraction nozzles: 2 × 200 mm MACHINE DIMENSIONS: * Length: 3200 mm * Width: 2000 mm * Height: 2000 mm * Weight: 2000 kg Machine advantages: * Very good, excellent technical condition Ljdpezru Azsfx Anxohl * Powerful 30 kW and 37 kW motors * Stable, heavy-duty industrial construction * High production capacity * Precise material guidance * Advanced feed system ensuring smooth operation * Ready for immediate start-up * Excellent for sawmills and wooden component manufacturing plants The machine has been regularly serviced and maintained in very good technical condition. It is ready for immediate use.

Condition: used, mileage: 531,000 km, power: 188 kW (255.61 HP), first registration: 07/2014, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 58 m³, loading space length: 8,450 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, tail-lift, Volvo FL 250 Box Van with Roller Shutter Door, LBW, Euro 6 For inquiries: 0925713 * Power output: 188 kW / 250 hp * Engine displacement: 7,698 cc * ABS * EBS * Differential lock, rear axle * AdBlue tank on the right side * Air-sprung comfort driver's seat * Manual roof hatch * Air conditioning * Electric windows, driver / passenger side * Electrically heated and adjustable mirrors * CD radio / AUX / USB Tail lift: Dhollandia Load capacity: 1,500 kg Body: Box van * Roller shutter door * Wooden wear-resistant floor * Rub rails on the left / right Dimensions (cargo space / loading area) Cargo space length: 8,450 mm Cargo space width: 2,500 mm Cargo space height: 2,700 mm Lhsdoydgdcepfx Anxjl Tires: 1st axle: 285 / 70 R 19.5, leaf-sprung / 35% 2nd axle: 285 / 70 R 19.5, air-sprung / 35% ----Price: €12,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors and prior sale excepted.

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 Lhodpjw Hquxsfx Anxsl • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad turning speeds 0,03 - 2,0 U/min connected load frequency 400 V weight 0,4 t Lhodpfx Aeygxzrenxel Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck

Year of construction: 2025, condition: new, The rotor mills RM 250 is ideally suited for the milling of soft & medium-hard samples like chemicals, charcoal, limestone, ceramic (porous), coal, chalk, sulfur, citric acid, sugar, titanium chips, glas, tire wire and many more! Lhsdpfof Ulibsx Anxel Max. feed size*

Year of construction: 2016, condition: used, Technical details: wheel base: 950 mm lifting capacity: 25000 kg Lifting height: 1310 mm Tare weight: 2100 kg Lhjdex Ac R Uopfx Anxol dimensions LxWxH: 1,7 x 2,0 x 0,75 m total power requirement: 11,2 kW WHEELSET CHANGING SYSTEM - WHEELSET SWIVEL Application: Changing wheelsets and driving sets for railroad applications (locomotives, freight wagons, etc.) 2 speed levels forward/backward 2 speed levels lifting approx. 60 sec./lowering approx. 110 sec., operation via manual control unit shift left/right +/-20 mm Lift category 5 EMERGENCY OFF Platform: L: 1420 x W: 657 mm, effective stroke 1050 mmOperating pressure for hydraulics = 185 bar Speed of chassis = 2 stages min. 18 mm/sec. Center distance: 950 mm Equipment: 10 m connection cable with 380 V *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm Lhjdpfx Aou Ng Npjnxjl *

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm * Lhsdpfx Aou Nurxsnxjl

Condition: used, Year of construction: 2018, operating hours: 1,902 h, * Radio * Air-suspension driver's seat Lhedpfxoy Iudgo Anxel ----Configuration: ROPS cab with cabin heater, dozer blade 1840x430 mm, track width approx. 400 mm, hydraulic quick-change system with swing motor (Powertilt), 4 additional hydraulic circuits, 750 mm digging bucket. Yanmar 4-cylinder diesel engine, 29.5 kW, 2 driving speeds 2.8-5.2 km/h Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT & ACCESSORIES. All purchase contracts, invoices, proforma invoices, orders, and sales negotiations are subject to our General Terms and Conditions (see Impressum).

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Lsdpfxeyurx Ts Anxjhl Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part