Used Fibro 2-Column Punching Tool for sale (96,283)

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Dodpfx Aox U Eiasnzekr Weight of the press: 13.5 tons

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz Dodpfx Anehlnzkszskr - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition Dsdpfx Ajk S Htxenzskr

Condition: used, Metal cabinet, workshop cabinet, storage cabinet with 2 sliding doors VIDMAR BORIK 2 sliding doors with roller guide 6 rotary drawers Drawer dimensions: Depth = 616/480 mm, Width = 380 mm, Height = 20/45 mm Width: 1440 mm Depth: 490 mm Height: 1000 mm - Rotary drawers height-adjustable in perforated grid - Without key Weight: approx. 150 kg Dkedpfxsypw Hxj Anzer

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Dkodpfjdzqmzox Anzor Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Dksdpfxsfim The Anzer Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: used, Punching tool with Linar-integrated punching brackets, ABS-SCHWABE Type 100/160 11 punching brackets, punching unit for a press brake Year of manufacture: approx. 1990 Outreach: 160 mm Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with the punching tool) A round hole tool, ø 5 mm, is installed. Punching bracket spacing: 195 mm - The tool unit was mounted on a hydraulic press brake. Dsdpfxedz Sp Ho Anzjkr Dimensions of the punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of the punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensions L x W x H: 2500 x 345 x 300 Weight: 400 kg Good condition

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Distance between upper and lower bracket: 12 mm Punch shank: Ø 7 mm Die outer diameter: Ø 20 mm Dkjdpfxjxbh N Ho Anzor Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring - Mounting slot 50 x 14 mm and 8 mm locating pin Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Weight: 3.7 kg Good condition 13 pieces available, price per piece

Condition: used, Punching bracket, punching unit SUPRA-CLAP / CEWE Type PAE 50 - 400 3GN 3P1 Throat depth: 400 mm Punching capacity: max. 10 mm material thickness Hole diameter: max. Ø 50 mm Distance between upper and lower bracket: 19 mm Punch holder: Ø 78 mm Cutting plate outer diameter: Ø 78 mm Cutting plate thickness: 20 mm Drop-out opening in punching bracket: 52 mm Installation height: approx. 220 mm - Punch holder as a punch unit with punch mount and material stripper with disc springs - Punch holder rotation-proof guided and spring-loaded - Punch length 97 mm, shank Ø 35 / 50 mm - Round hole tool: punch Ø 41 mm and die Ø 41.5 mm - Long fixing hole: 270 x 13.5 mm Dimensions of punching bracket (L x W x H): 550 x 95 x 220 mm Weight: 27.5 kg Good condition 4 units available, price per unit Dkodpfjxbh N Tsx Anzor 3 units with Ø 41 mm punch tool 1 unit with Ø 43 mm punch tool

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation Dksdsv Tp D Hjpfx Anzjr - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition Dedpfx Anod Swtaszskr

Condition: used, Metal cabinet, workshop cabinet, storage cabinet with 2 sliding doors VIDMAR BORIK 2 sliding doors with roller guide 8 rotary drawers Drawer dimensions: depth = 616/480 mm, width = 430 mm, height = 55 mm Width: 1440 mm Depth: 490 mm Height: 1000 mm - Rotary drawers height-adjustable in perforated grid - No key - Sliding doors move with difficulty Djdpfxoxf Uuqe Anzekr Weight: 150 kg

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Dedpfx Ajdzqddonzskr Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Punching Bracket, Punching Unit SUPRA-CLAP Type C12.300 Throat Depth: 300 mm Punching Capacity: 0.3 to 2 mm material thickness, depending on cutting clearance Hole Diameter: Ø 2 to Ø 12 mm Distance between lower die and punch holder: 8.5 mm Distance between upper and lower bracket: 13 mm Punch Shank Diameter: Ø 12 mm Cutting Plate Outer Diameter: Ø 30 mm Cutting Plate Thickness: 12 mm Drop-through Opening in Punching Bracket: 14.5 mm Installation Height: approx. 145 mm Dkodpoxbh Rdjfx Anzsr - Standard punch length 70 mm with 60° head (Punch per DIN 9861 Form C) - Punch holder with spring stripper and return spring - Mounting slot 50 x 13.5 mm and 8 mm locating pin Punching Bracket Dimensions (L x W x H): 390 x 36 x 145 mm Weight: 4 kg Good condition 9 units available, price per unit 3 units with tool inserts (punch + die) 6 units without tool inserts (without punch + without die)

Condition: used, Offer 41414 Dkodpsxhfhmofx Anzer Guide unit for punching tool suitable for AMADA type EMK 3612

Year of construction: 2019, condition: good (used), machine/vehicle number: 157, Offer 22273 Technical data: - Stroke: 30 mm - Air consumption per stroke: 5 l - Pneumatic connection: 8 bar - Space requirement: approx. W 500 x H 550 x D 500 mm - Weight: approx. 70 kg - Includes: - Foot switch Dksdpfeiv Hz Djx Anzor - Mobile machine base: W 600 x H 830 mm - Various tools by HUECK

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 517 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 2,140 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product number: Swiss commodity code: Origin: DE/08 Weight: approx. 517 kg Fully assembled as a set including 6 tool holders WKH 210 6 tool holders WKH 211 5 tool holders WKH 212 5 tool holders WKH 213 4 tool holders WKH 214 4 tool holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Unladen weight: 517 kg Structure powder-coated in Djdpfxsuv Emmo Anzjkr Gentian blue RAL 5010 (body) and gray white RAL 9002 (pull-outs)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, overall weight: 363 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Completely assembled as a set including 4 tool holders WKH 210 4 tool holders WKH 211 4 tool holders WKH 212 Dsdpfxouv Edlj Anzjkr 4 tool holders WKH 213 2 tool holders WKH 214 2 tool holders WKH 215 3 tool insert plates WEB 360 2 tool inserts WEB 367

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, overall weight: 517 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 2,140 mm, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Weight: approx. 517 kg Fully assembled as a set including 6 WKH 210 tool holders Dkedeuv Endspfx Anzjr 6 tool holders WKH 211 5 tool holders WKH 212 5 tool holders WKH 213 4 tool holders WKH 214 4 tool holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Unladen weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and gray white RAL 9002 (pull-outs)

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 363 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Dodpfx Ajuv Ecnjnzekr Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Weight: approx. 363 kg Fully assembled as a set including 4 WKH 210 tool holders 4 tool holders WKH 211 4 tool holders WKH 212 4 tool holders WKH 213 2 tool holders WKH 214 2 tool holders WKH 215 3 tool insert plates WEB 360 2 tool inserts WEB 367

Condition: ready for operation (used), Schüco tools, pressing tools, stamping tools, Art. No. 293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05 and 5 pieces without a number. Dkodsd Sc D Sepfx Anzer

Year of construction: 2019, condition: used, We are selling several used marking, beading, drawing, thread embossing, and tabbing tools from Pass Stanztechnik that were used on our Trumpf TruMatic 7000. We also have various smaller tools as well as spare and wear parts available. A complete list can be sent via email. Dksdpfx Aeyu Tl Usnzor

Condition: new, Cluster tool C/D/E station thick turret punch tool for Amada, Lvd Original style punch compatiable for Amada/Mate guide holder quick adjustable style compatiable for Mate/Wilson 90 guide holder Dkodpfx Asiq Dmmonzjr

Condition: new, Cluster tool for Trumpf punch Dedpfx Ansiq Dmxozokr

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Djdpfxezkbiro Anzokr Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.