Used Flp 1600/1 for sale (78,131)

Condition: excellent (used), Year of construction: 2017, Year of manufacture: 2017 Reach: 1200 mm Control system: IRC5 Rotary table Dust extraction unit Iijdpfx Apjyu Ihwenob Automatic spray gun V5 HVLP Diaphragm pump DP Comboi Quantity: 2 units

Condition: good (used), Year of construction: 2015, functionality: fully functional, Stacker Baumann type NUP 1600, serial no. 53.300, load capacity 1,600 kg, max. format 1500 x 1185 mm. Immediately available. Iisdpfjyy Sycex Apnjb

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross Iiodpoyxdwdsfx Apneb • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Iisdpfx Aeyx Dz Nopnjb Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: new, weight max. in kg 1000 kg fork length 1250 mm stroke height 1600 mm high 1940 mm weight of the machine ca. 0,4 t dimensions 1,69 x 0,78 x 2,09 m Pallet truck with Isdsyx Iqbepfx Apneib - new 12-volt battery - charger - electric lift - manual drive

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device Iodpexabumofx Apneib - 2x front support arms - movable double foot switch (operation)

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 41,500 h, control type: CNC control, controller manufacturer: SIEMENS, sheet thickness steel (max.): 8 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 60 m/min, cutting speed: 1,200 mm/min, overall weight: 18,000 kg, total length: 7,600 mm, total width: 7,000 mm, total height: 2,500 mm, TRUMPF TRUMATIC 5000 punching machine, large format, in perfect technical condition. Iedpfoy Rh E Njx Apneib

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions, enabling the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Rear stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Iisdpfx Asy Sgp Nopnjb Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg Additional equipment available. Please contact the seller.

Condition: good (used), Rotary vane vacuum pump Isdpfx Asd Hh Nkspnjib oil circulation lubricated Manufacturer: Busch Type: RA 1600 B Status: Refurbished or tested and serviced available Warranty: up to 12 months Suction capacity: approx.1000m³/h Ultimate pressure: approx. 0,5 mbar Operating fluid: Mineral oil (Included) Delivery time: 1-2 Wo.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,834 h, load capacity: 1,600 kg, lifting height: 3,400 mm, free lift: 1,800 mm, load center: 600 mm, fuel type: electric, mast type: free lift with telescopic boom, construction height: 2,300 mm, battery capacity: 465 Ah, battery voltage: 24 V, fork length: 1,150 mm, Stöcklin EFI 1600 Sit-down pallet stacker with initial lift. Perfect condition. Lifts 1600 kg. "2-in-1 machine" It can be used for daily handling of pallets up to 2000 kg, which can be lifted on the first lift. And in addition, it can be used as a stacker when you need pallets in racks or similar. Load capacity on forks: 1600 kg. With the initial lift, you can drive over uneven surfaces, e.g. level difference between 2 halls, door opening with drop, etc. In addition, you can drive with 2 pallets at the same time. Very easy to maneuver, nice ergonomic driving position and easy to get on and off. The machine is in perfect condition. Lifting height: 340 cm. Building height: 230 cm. (With lowered undercarriage) Iisdju T Ea Sjpfx Apnob Year: 2006 Hours: 5834 Large battery: 24V 465Ah with 50% remaining capacity. incl. charger. Transportation can be arranged.

Condition: good (used), Year of construction: 2007, functionality: fully functional, The Italmeccanica MacPower 6TE/480/1600 is an industrial brushing machine / surface processing line for panels and sheet elements (e.g., MDF, chipboard, wood). The unit is designed for brushing, structuring, and finishing panel surfaces in woodworking and furniture manufacturing processes. Main features and parameters (typical for the MacPower series): • Working width: approx. 1600 mm • Multi-head brushing system (longitudinal and transverse brush groups) • Capable of processing both surfaces and panel edges • Designed for continuous operation in production lines • Robust industrial build, high efficiency, and consistent processing quality • Industrial 3-phase power supply • Typical applications: surface structuring, finishing of furniture panels, door components, wood-based boards The MecPower/MacPower series by Italmeccanica is used in industrial panel brushing lines. Machines are often equipped with multiple brush groups and a working width of 1600 mm, allowing the processing of large sheet elements. Italmeccanica MacPower 6TE/480/1600 Machine type: brushing / structure sanding machine for panels Manufacturer: Italmeccanica (Italy) 🔧 Working data • Working width: 1600 mm • Material pass-through height: approx. 130 mm (typical for the series) • Minimum piece length: approx. 400 mm • Number of working units: 6 • Top units: 2 • Side units: 3 Iodpjykzigefx Apnsib • Longitudinal/transverse units: combination of longitudinal and transverse brushes • Edge processing: yes • Rollers/brushes: multizone horizontal and transverse brushes ⚡ Electrical data • Installed power: approx. 11–17 kW (depending on configuration) • Power supply: 3-phase 400 V, 50 Hz • Extraction system: dust extraction ports on the working units 📏 Dimensions and weight (typical for 1600 version) • Length: approx. 3300 mm • Width: approx. 2450 mm • Height: approx. 2250 mm • Weight: approx. 1500–3000 kg (depending on equipment)

Condition: used, functionality: fully functional, power: 100 kW (135.96 HP), fuel type: diesel, color: green, overall weight: 21,600 kg, operation weight: 18,400 kg, Year of construction: 2007, operating hours: 4,990 h, Vögele Super 1600-2 asphalt paver Year of manufacture: 2007 4,990 hours 100 kW Perkins engine 18,400 kg Automatic levelling system Screed AB500-2TV 3,200 kg Ijdpfx Apoy Eqm Nsnoib 5 m hydraulic paving width Extensions: 2 x 75 cm, 2 x 25 cm, total width 7 m Total weight: 21,600 kg Transport width: 2.55 m

Condition: used, Year of construction: 2004, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: Midac, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,400 mm, Weights Empty weight: 3.212 kg Functional Lifting capacity: 1.600 kg Number of valves: 3 Ijdpeyu T I Nefx Apnoib Supply voltage: 48 V CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Fork carriage: Sideshifter Additional information Please contact Bas Sindorf for more information

Condition: new, motor power: 30performance of pump: 65oil filling: 150messurements (LxWxH): 3700x1500x3200weight approx.: ca. 5000Cylinder: Ø 400pressure: 500Pressure adjustment via rotary knob Iodpfx Asutuy Nspneib Motorized control via hand lever Handwheel for laterally movable cylinder Hydraulic unit mounted on the lower side next to the frame Clear opening: 1650 mm × 550 mm

Year of construction: 2002, condition: used, This listing is for a Lancer Washer Infeed Type 1600 PCM DPSS The unit is in full working condition and is ready for immediate release. Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Iiodpsxhfkuefx Apneb Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Parts shown by hand not come. Technical details are shown on pictures. Iedpfx Ajyfgx Nopneib

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm Ijdewzypuepfx Apnoib - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D Iodow Rrb Hopfx Apneib max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2007, turning diameter 1400 mm swing diameter 1600 mm turning height 500 mm Workpiece length - Bore grinding 300 mm Workpiece length - Turning 500 mm control Siemens Sinumerik 840 D work piece spindle speed range 0-400 U/min boring diameter 100 - 500 mm total power requirement ca. 185 kW weight of the machine ca. 35 t With grinding spindle Table strokes: - Z1/Z2 axis 1000 mm - X1/X2 axis approx. 1400 mm Iodpfx Ajw Rf Slepnjib Table speed infinitely variable: - Z 0 to 30 m/min - X 0 to 60 m/min - Workpiece spindle flange diameter 520 mm - Infeed speed 0.01 - 15 mm/min Equipment/ Accessories - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - documentation

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm Iijdpfx Asvxwhwepneb ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Condition: new, Year of construction: 2025, cutting diameter 1600 mm Iiodpfx Apoymf Rgenob saw band length 14000 mm cutting width 1600 mm hydraulic motor 3 kW total power requirement 11 kW / 7525 Nm weight of the machine ca. 20 t required space 4020 X 2220 X 7600 mm Custom-made: KSY 1600 × 1600 horizontal band saw Technical specifications: - Max. cutting diameter: 1,600 mm - Saw blade length: 14,000 mm - Cutting width: 1,600 mm - Machine weight: approx. 20 t - Installation dimensions (L × W × H): 4,020 × 2,220 × 7,600 mm Delivery time: approx. 5 months Customised adaptations in terms of dimensions and design are possible by arrangement. Optional equipment: - Clamping devices (choose from conventional, semi-automated or fully automated) - Motorised roller table system - Laser cutting line display - Additional double roller table - PLC control with operating screen - Vibration damping system

Condition: new, cutting diameter 1600 mm saw band length 11000 mm cutting width 1,6 mm capacity 90 degrees: square 1600 X 1600 mm capacity 90 degrees: flat 1600 X 2500 mm total power requirement 11 kW weight of the machine ca. 19 t The pictures are only for orientation and illustration of the KSY model in a Iiedeymf N Ajpfx Apnjb different size.

Condition: new, weight 1350 kg diameter 1760 mm height 1240 mm 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. Iiodpfjymf Irox Apnob These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: good (used), Year of construction: 2010, functionality: fully functional, total length: 5,600 mm, vertical wasching and drying machine workong direction : from right to left working height : 1600 mm open top number of brushes : 4 glass thikness : 3 - 12 mm Iiedpfjx Hv Drsx Apnsb

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration Iodpex D E Dyefx Apnjib • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg