Used Fomaco Fgm 80/320 for sale (19,950)

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Gisdpecvkalofx Agpet Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Gsdpout S E Nofx Agpjit Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Giedpevtn H Tofx Agpst Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m

Condition: used, mileage: 1,147,000 km, power: 302 kW (410.61 HP), first registration: 01/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: mechanical, loading space length: 6,500 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2009, Equipment: ABS, crane, Renault Premium 410 DXI Platform 6,50 m + CRANE + REMOTE CONTROL / 6x2 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 1 147 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS Gedpfx Agem Sxkuspeit ? POWER STEERING ? TACHOGRAPH TIPPER: 650 x 250 x 60 cm (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 530/135 cm TIRE SIZE: 13R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: PALFINGER PK 80 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, Jungheinrich forklift from 2025 with only 15 operating hours! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,000 mm Free lift: 150 mm Load center: 500 mm Fork length: 1,200 mm MACHINE DETAILS Power type: electric Mast type: Duplex Power: 9 kW Battery capacity: 750 Ah Remaining battery capacity: 100% Battery voltage: 48 V Tyre condition: 100% Own weight without battery: 2,350 kg Giodpfxjy Nc Rws Agpot Battery weight: 962 kg to 1,094 kg Operating hours: 15 h EQUIPMENT Lighting Clamp hydraulics Pallet forks Side shifter Fork rotator (180 degrees)

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Godpfx Aey R Tk Rjgpeit Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram Giodpjy R Nnfofx Agpjt o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 2001, operating hours: 533 h, Type of fuel: Electric Colour: Grey Empty weight: 12.570 kg Dimensions (LxBxH): 385 x 200 x 330 cm Lifting capacity: 8.000 kg Lift height: 408 cm Fork dimensions: 2.400 x 2.430 mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: T32207.0234 - Operating hours: 533 - Lifting capacity: 8000kg - Lifting height: 4080mm - Overhead clearance: 3300mm - Free lift: 0mm - Fork length: 2400mm - Maximum fork width: 2430mm - Minimum fork width: 530mm - Number of wheels: 6 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Heating, Work lights - Mast: Duplex - Drive: Electric - Brand/Type: Midac - Capacity: 1440Ah - Battery voltage: 80V - Battery test result: 61% - Transport dimensions: 3850mm x 2000mm x 3300mm (l x w x h) - Transport weight [kg]: 12570kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Gjdpoywuyasfx Agpeit

Year of construction: 2008, condition: good (used), Pressbrake LVD - PPEB EASY FORM 320/40 MACH-ID 7712 Make: LVD Godpenvduzefx Agpoit Type: PPEB EASY FORM 320/40 Control: CADMAN Year: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Specifications Metric US Standard Max. bending length 4000 mm Distance between column 3150 mm Max. pressing force 320 T Dis. Beam - Table 570 mm Beam stroke 300 mm Table Width 200 mm Troth beam 400 mm Approch speed 120 mm/min. Working speed 14 mm/min. Return speed 130 mm/min. Adjustment X-Axis back gauge 1000 mm Control CADMAN Power 42 kW Dimensions (Estimate) Length 5800 mm Width 2300 mm Height 3800 mm Weight 23000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, conveyor belt length: 4,000 mm, conveyor belt width: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, total height: 650 mm, overall weight: 6,000 kg, Platform height: 650mm Platform length: 4000mm Platform width: 2000mm Max. loading capacity:60T Number of axes: 4 Number of wheels: 32 Wheel Ø: 425mm Length: 4000mm Godpfeyh H Sfjx Agpjit Width: 2000mm Height: 650mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Giedpfxjxyhhaj Agpot Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Gsdpfjwrza Aox Agpjit

Condition: good (used), profile bending machine Gsdpfswtph Dox Agpoit

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Gijdpfxemb Urdj Agpet Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø 20 Ø Min. Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed Giedovt Tuispfx Agpet 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Year of construction: 1981, condition: excellent (used), Dorries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2: 5.100 - Max. turning height : 2.650 - Stroke Tool holder : 1.250 - Crossrailadjustment : 1.500 - Table load : 60.000 - Tool shank size : 40 x 40 - Max. cutting power : 75000 - Max. torque on table : 60000 - Power main motor : 75 kW / 415 - Speeds 1 / 2 / 3 Range: 0,8 – 100 - Feeds Vario : 0,1 – 1.000 - Rapid Feed : 6.000 - Dimensions: 9,30 X 6,10 X 6,30 X 60 - CNC Siemens Sinumriek System 8 - Tool changer 16 positions - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways - Displaceable table hydraulic / manuel - Circular interpolation Gisdpfx Agokwcpxjpjt Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Godpfxevn Svuo Agpjit Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: good (used), Year of construction: 2004, turning length: 1,000 mm, Manufacturer: MAZAK Type: QTN 250 Control: MAZATROL 640T NEXUS Year of Manufacture: 2004 Specifications Metric US Standard Max. Turning Diameter 675 mm X-Axis 230 mm Z-Axis 1025 mm Spindle Bore 77 mm Speed 4000 rpm Spindle Power 26 kW Tool Changer 12-Hole Gisdpfxswaiins Agpst Quill Mount 5 Mk Dimensions (Estimate) Length 3800 mm Width 1800 mm Height 2000 mm Weight 5200 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 1994, Overview  The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  4500 rpm with self cleaning drum Accessories  Spare Parts Tools Gisdpfx Ajv N Hcxogpet

Condition: used, Year of construction: 1993, Used 3 meter CNC press brake by Safan Model: CNCL 80 3100 Capacity: 3100 x 80 tons Y1, Y2, and X axes CNC controlled Gisdpfxey Nydzo Agpet CNC crowning Flat pressure table Year of manufacture: 1993

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 450 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 495 mm, workpiece weight (max.): 200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotary table diameter: 320 mm, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 5AX-320 5-Axis Simultaneous Machining Center – Immediately Available The LAGUN L 5AX 320 Machining Center stands for high precision, robust construction, and cost-effective production. Ideal for single-part manufacturing as well as series production in mechanical engineering, mold making, and subcontract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Financing / leasing possible ✔ Compact design with high stability ✔ 24-month warranty Giodeh Ekqyopfx Agpjt Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and is renowned for robust construction, high dynamics, and durable machine concepts. The machining centers impress with reliability, easy maintenance, and low operating costs. Technical features: CNC control: HEIDENHAIN TNC 640 controller HEIDENHAIN 15" TFT display HEIDENHAIN motors, encoders, and HR 510 electronic handwheel Chip removal: Chip conveyor Enclosure: Full enclosure with laterally opening viewing windows Precisions: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and induction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create a personalised offer.

Condition: new, Year of construction: 2025, power: 80 kW (108.77 HP), motor manufacturer: Yunnei - DEF47CZAA5, General information Field of application: Construction Weights Empty weight: 2.500 kg Functional Generator capacity: 80 kVA Dimensions of cargo space: 300 x 115 x 200 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank Giodpfeuidypox Agpjt

Condition: used, Year of construction: 2019, operating hours: 4,279 h, lifting height: 4,440 mm, free lift: 1,580 mm, fuel type: electric, mast type: triplex, fork length: 990 mm, fork width: 920 mm, total height: 2,040 mm, total length: 3,270 mm, total width: 1,120 mm, color: yellow, Empty weight: 3.542 kg Lifting capacity: 2.000 kg - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: FN588359 - Operating hours: 4279 - Lifting capacity: 2000kg - Lifting height: 4440mm - Overhead clearance: 2030mm - Free lift: 1580mm - Fork length: 990mm - Maximum fork width: 920mm - Minimum fork width: 230mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Weighing system, Free-lift, Half cabin - Mast: Triplex - Drive: Electric - Battery voltage: 48V Gisdpoy Nk Epjfx Agpot - Transport dimensions: 3272mm x 1120mm x 2040mm (l x w x h) - Transport weight [kg]: 3542kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, mileage: 261,310 km, power: 235 kW (319.51 HP), first registration: 06/2016, fuel type: diesel, wheelbase: 4,000 mm, fuel: diesel, color: other, driver cabin: day cab, emission class: euro6, total length: 8,600 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2016, Unladen weight: 12,895 kg Godpfxoy Rzxps Agpjit Payload: 6,105 kg Gross vehicle weight: 19,000 kg Damage: none

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,080 h, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,600 kg, total length: 2,200 mm, drive type: Elektro, construction width: 1,200 mm, Electric 3-wheel forklift Load centre: 500 kg Giedpsy Scmqefx Agpjt Mast type: Triplex Technical condition: good Front tyres type: super elastic Front tyres condition: 100% Rear tyres type: super elastic Rear tyres condition: 100% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Kapatest, 80% capacity Battery year: 2021 Description: Fork positioner, opening range 330-1,000 mm Sideshift, fork positioner device, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windscreen, heating, full cabin, pulse control, full free lift, CE certificate.