Used Gweike Gweike Lf4020Gar 6Kw for sale (195)

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET351P5-offAD-Bypass - 2200373733, cooling capacity: 66 kW (89.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,082 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 11.2 m³/h, pump pressure: 4.68 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, water chiller; cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Fedpfx Adewlt Rajcsph Special features: - Open fill system / attached tank - Bypass with manual valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Start-up current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technical OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual imperfections due to their usage. (Subject to technical changes and prior sale!)

Condition: new, Laser performance: 6Loading Capacity: 1250precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 15coolant fittings: Wasserkühlerweight approx.: 17500messurements (LxWxH): 4400 x 9500 x 2350 mmMaximum speed: 120pipe diameter: 220Working Area: 2000 x 6000 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Fpjdpfx Aetwtn Iodceh Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Working Area: 3000 x 1500precision of position: 0,03repeat accuracy: 0,02Laser performance: 6Technical Description – Fiber Laser Cutting Machine LD-3015EModel: 3015EWorking Area: 3000 × 1500 mmMaximum Linkage Speed: 170 m/minMaximum Acceleration: 2.0 GMachine Overall Dimensions: 10,000 × 3,000 × 2,400 mmOverall Weight: 5,000 kgPositioning Accuracy: ±0.03 mmRepositioning Accuracy: ±0.02 mmZ-Axis Travel: 350 mmLaser Head: BOCI BLT421 Laser Head (6 kW)Gantry Structure: Iron Welding GantryPower Source: Raycus 6000 W CE Global Version Fpedpjxwfu Esfx Adcjh

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1850x-travel: 2020y-travel: 6050Laser performance: 6precision of position: 0,05repeat accuracy: 0,03weight approx.: 16000messurements (LxWxH): 13200 x 2800 x 2300Table change time: 15Maximum speed: 120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  Fpsdpfjtwtnzex Adcoh - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: new, Working Area: 3000 x 1500precision of position: 0,03repeat accuracy: 0,02Laser performance: 6Technical Description – Fiber Laser Cutting Machine LD-3015EModel: 3015EWorking Area: 3000 × 1500 mmMaximum Linkage Speed: 170 m/minMaximum Acceleration: 2.0 GMachine Overall Dimensions: 10,000 × 3,000 × 2,400 mmOverall Weight: 5,000 kgPositioning Accuracy: ±0.03 mmRepositioning Accuracy: ±0.02 mmZ-Axis Travel: 350 mmLaser Head: BOCI BLT421 Laser Head (6 kW)Gantry Structure: Iron Welding GantryPower Source: Raycus 6000 W CE Global Version Fpedpfexv Ha Hex Adcsh

Condition: new, Year of construction: 2026, NEW 2026 – REM SCR 50 CNC 2S | Dual-Head CNC Vertical Turning Center High-performance heavy-duty CNC Vertical Turning Center with two independent milling heads and two disc-type automatic tool changers. Designed for the most demanding precision turning and milling of large workpieces. Fpodpfehh Dnxsx Adcsh TURNING ENVELOPE: • Faceplate Diameter: 4,500 mm • Machining Diameter: 4,700 mm (with CE enclosure) | 5,300 mm (open) • Machining Height: 2,100 mm / 3,500 mm • Max. Workpiece Weight: 30,000 kg / 50 tonnes AXIS TRAVELS: • X & U-Axis (Ram Carriage): -100 to 2,600 mm • Z & W-Axis (Ram): 1,250 mm / 1,700 mm WORK TABLE: • Faceplate: 4,500 mm with T-slots | Jaw chuck height: 200 mm • Speed: 0–50 rpm • Power (S1): 96 kW / 2×75 kW • Torque (S1): 130,000 Nm / 320,000 Nm • Drive: ZF gearbox reducer + belt transmission MILLING RAMS (Left & Right | 250×250 mm | KM 63): • 2× Independent heads — simultaneous or individual operation TOOLING: • 2× Disc-type ATC (12 stations each — turning + milling) • Maximum tool weight per station specified on request Manufactured by REM Bacau – Romania. New machine, available on order. Delivery worldwide. Contact us for full specs, videos, and pricing.

Condition: refurbished (used), ABB SDS 100 servo sürücüler SDS102-069A0-400V00-0000 3ADT211027R0001 46kW üretici tarafından elden geçirilmiş 670V DC çıkış Giriş 380-400V AC Fpjdpsd Iu Ulofx Adceh 39 kg Çok geniş ABB Servo Sürücü seçimi. Cihazlarımızın hepsi elden geçirildi. Resimlere bakınız. Cihazlar, elden geçirme tarihine bakılmaksızın gönderilir. Lütfen ekranınızdaki renklerin orijinal renklerden biraz farklı olabileceğini unutmayın.

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) 16KW Measurement range 0–400 °C Fpjdpfev H Ad Hjx Adcoh Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Fsdpsyym Hkjfx Adcoph Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Build in Spindle motor High Rigidity BMT Turret Fpedpsx I Niksfx Adcoh Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Speed live tools: 5000Rpm Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Chip conveyor: Yes Tool eye: Yes Length: 3800mm Width: 2000mm Height: 2100mm Weight: 8500kg

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Fjdpeyvhxmofx Adcjph Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Fpjdpfx Adjy Expujcjh Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers Fpsdpfxjzccuuj Adcjh TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, mileage: 47,681 km, power: 471 kW (640.38 HP), first registration: 01/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Fifth wheel height 1.10m Digital mirror replacement system MAN OptiView, driver comfort seat, multifunction steering wheel, additional water heating 6KW, ASR, emergency brake assistant EBA, long-distance traffic assistant, lane change collision avoidance assistant and turning aid, attention warning, MAN Media safety package light and visibility Plus safety package Advanced driver assistance package emergency brake signal hazard warning light activation immobilizer MAN EasyStart transmission function: MAN EfficientRoll, MAN Idle Speed Driving, rocking free fifth wheel coupling JOST JSK 42 MK 2 inch kingpin diameter 2 inches 162mm construction height automatic lubrication 575mm fifth wheel lead from the middle of the last axle Fjdpfsvm Imgox Adcsph

Condition: ready for operation (used), X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible. Fjdjzavyrspfx Adceph

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg Fsdpfx Ajzada Hjdcjph ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number 6691 TECHNICAL DATA Fedpjzabd Aefx Adcsph - spindle diameter: 25mm - spindle working height: 100mm - interchangeable spindle - spindle lock - height adjustable (up/down) - spindle support - hold-downs - original cast iron fence with full adjustment - 4 rotation speeds + reversible (right/left): 3000, 4500, 6000, 9000 rpm - table dimensions + mitre gauge: 1020x900mm - motor: 6kW - extraction port diameter: 2x120mm - dimensions (L/W/H): 1100x1070x1640mm - weight: 658kg – spindle support – mitre gauge – brake – very good condition, used milling machine Net price: 11,500 PLN Net price: 2,740 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Water connection: 1/2 inch RG, water pressure: 0.7-6bar, water connection temperature: 50°C, drain diameter: 40mm, wash tank capacity: 95l, wash water temperature: 60°C, wash pump power: 2kW, wash pump capacity: 600l/min, wash pressure in the nozzles: 1.4bar, rinse tank capacity: 13l, rinse water temperature: 85°C, rinse pump power: 0.37kW, rinse pump capacity: 350l/min, rinse pressure in nozzles with rinse pump: 0.8bar, wash programs: 2, 4 and 6min, washing volume: 635x690x610mm, noise level: 70dB(A), water consumption per wash cycle: approx. 6l, heating element power: 2x 6kW + 1x 4.5kW, fuse protection: 32A, working height: 906mm, internal opening dimension: 508.5mm, length: 1265mm, width: 805mm, height opened: 2030mm, net weight without water: 225kg, gross weight without water: 250kg. An on-site inspection is possible, without power. Fjdpfx Adoy Uyd Sscjph

Condition: good (used), Year of construction: 2016, Leonhardt AG2 Twin head dosing machine Fpsdstuf Nbepfx Adcoh Serial: 1401449 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph

Condition: excellent (used), CATALOG NUMBER 7918 TECHNICAL DATA - Max. saw blade diameter: 450mm - Spindle diameter: 30mm - Pneumatic top clamp - Blade guard - Blade guard also functions as a hold-down clamp - Pneumatic blade feed - Cutting height (at 250mm width): 120mm - For lower cutting heights, the cutting width is increased - Main motor power: 6kW - Extraction nozzle diameter: 120mm - Table dimensions (LxW): 650x850mm - Table height from base: 1000mm - Roller tables: - Infeed roller table + stop: 3180mm - Outfeed roller table + stop: 2450mm - Roller width: 360mm - Operating pressure: 8 bar - Overall machine dimensions (without roller tables) LxW xH: 1300x1050x1800mm Fpjdpfey Tw Ixox Adcjh - Weight: 550kg FEATURES – 2 roller tables – Pneumatic blade stroke – Used saw, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on EUR rate of 4.2) (Prices may change with significant rate fluctuations)

Condition: like new (used), Year of construction: 2008, machine/vehicle number: CA7-360 NG, Rotary press-on capper 7 station incl hopper/sorter Left-right Central greasing Vögel Pneumatic Festo Siemens S7 controlled min 5.500-max 17.000 cap/hr electric height adjustment tooling capping heads: Diam 65mm/27,4mm Hight Fpodsr Iyi Tepfx Adcoh Diam 75mm/32mm Hight Diam 94,5mm/40,3mm Hight container size tooling for glass bottle: Diam 65.5mm/104mm hight Diam 75,5mm/140,7mm hight Diam 93,3mm/180mm hight electric 6Kw 400v Pressured air minimum 5bar Machine is in excelent condition.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser power: 6,000 W, sheet thickness (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, GEKA Fiber Laser including: RAYCUS 6kW laser source Fsdpoy T Rc Aofx Adcjph BOCI BLT441 cutting head with automatic nozzle cleaning CNC control system FSCUT8000 Servomotor & axis drive INNOVANCE & YAKAWA Linear guide with rack and pinion drive CYPCUT operating software, nesting software included Electrical and pneumatic components Installation and training

Condition: used, Bodor T230A-6.5-6Kw CNC Bevelling Tube Fibre Laser Cutter Brand new 2025 Automatic bundle tube loader for 6500mm lengths Optional bevel cutting head included for bevel cuts in ±45 degrees Tube size range Ø25-356mm With Dust Collector Fodeyuv Dtopfx Adcsph Safety Light Guards and Internal Camera Manuals Available

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Fpodpfxjytd Scj Adcsh Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: as good as new (ex-display), single phase, 1950 kg, dust extraction, vacuum table with four individually controlled sections, water cooled 6kw 24000 rpm spindle, A2 hand held controller.spindle, Fpodpfxshh Anro Adceh