Used Hebrock F5 for sale (669)

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Bledpfxezpcvds Al Ajn Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: excellent (used), warranty duration: 6 months, Kolb spiral mixer - used - model SF 50 Bedpfjzvd Stox Al Ajln - capacity 50 kg of dough (approx. 80 liters) - 2 speeds - manual control - stainless steel bowl and kneading hook - 6-month warranty - dimensions: width 560 mm, depth 950 mm, height 1,160 mm - price: 2,900 € EXW

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 2,605 mm, total width: 3,135 mm, total length: 3,055 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 1,050 kg, table load: 200 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 200 kg, Equipment: documentation/manual, type plate available, This WENZEL SF 55 coordinate measuring machine is a modern and highly precise solution for the dimensional inspection of mechanical parts. Built in 2021, it is equipped with a 5-axis Renishaw PH20 measuring head, WM Quartis software, and a temperature compensation system, offering high performance in testing and quality control operations. Key features: * Year of construction: 2021 * Measuring range: 500 × 500 × 500 mm * Measuring uncertainty MPEE: 1.8 + L/350 µm * 5-axis Renishaw PH20 measuring head with Head Touch technology * WM Quartis measuring software * Temperature compensation system * WPC 2040 control unit * Complete set of monitor, keyboard, and mouse * Reference sphere included Equipment: - Complete and ready-to-use measuring system - HT400 (RC) control panel - Compressed air maintenance unit - User, maintenance, and operating manual - CE declaration of conformity Otto Machine For over 30 years, Otto Machine has been selecting and selling used machine tools and measuring systems in Italy and abroad. The machines can be viewed at our showroom or via video call. Bodpfx Aezrtm Sol Asln Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: new, Year of construction: 2026, functionality: fully functional, Dust filter for CORMAK FM340, FM300SA, FM350 and FM500 extraction systems The CORMAK dust filter is an original consumable part designed for the FM340, FM300SA, FM350 and FM500 dust extractors. Its function is to effectively trap fine dust particles generated during woodworking, ensuring cleaner air and the correct operation of the machine. Regular replacement of the filter helps maintain the extraction unit’s performance, reduces the load on the filtration system and ensures long-term, trouble-free operation. Key benefits An original CORMAK component ensuring a perfect fit for the machine. Highly effective filtration of dust and fine particles generated during woodworking. Maintenance of high extraction efficiency through regular replacement of the used filter. Quick and easy replacement, facilitating routine maintenance of the unit. Application Bledpfx Aewwtnvel Aen The filter is designed for CORMAK FM340, FM300SA, FM350 and FM500 extraction units used in joinery workshops, workshops and production facilities involved in woodworking. Compatibility Extraction unit models FM340 / FM300SA / FM350 / FM500 Component type Dust filter Application Filtration of dust, sawdust and fine wood waste

Condition: new, Year of construction: 2026, functionality: fully functional, Dust filter for CORMAK FM300 and FM300S extraction units The CORMAK dust filter has been designed as a replacement part for the FM300 and FM300S extraction units. It effectively traps fine dust particles generated during woodworking, improving filtration quality and working comfort at the workstation. Regular replacement of the filter helps maintain the extraction unit’s performance, reduces the load on the motor and ensures the correct operation of the entire dust extraction system. Key benefits Genuine CORMAK filter ensuring full compatibility with the unit. Effective filtration of wood dust generated during the operation of woodworking machinery. Improved extraction efficiency thanks to the regular replacement of the worn filter element. Easy replacement enabling quick maintenance of the unit. Application The filter is designed for use in CORMAK FM300 and FM300S extraction units used in joinery workshops, workshops and woodworking facilities. Compatibility Extraction unit models FM300 / FM300S Bljdpfxsvzpzbs Al Aen Component type Dust filter Application Filtration of dust and fine wood particles

Condition: good (used), Emhart TUCKER ETF50R.00.54/12.5.13-25BM Stud Welder Technical Details: Manufacturer: Emhart Teknologies (TUCKER GmbH) Model / Type: ETF50R.00.54/12.5.13-25BM Item Number: T045 006/400 Voltage: 400 V, 50/60 Hz Brand: Made in Germany Condition: Used (see pictures). Note: Blodpfexl Aguex Al Aen For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, mileage: 400 km, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive ? Vehicle type: Flatbed truck and chassis, suitable for crane mounting ? Cab color: black with day registration 2025 Engine ? Type: MAN D2676 LF85 ? Power: 352 kW (480 hp) ? Torque: 2,400 Nm ? Emission class: Euro 6d Transmission ? MAN TipMatic 12-speed automatic transmission ? Reinforced single-plate clutch (430 mm) ? Driving programs: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis ? Wheelbase: 3,600 mm ? Overhang: 1,950 mm ? Main wheel spacing (between rear and tag axle): 1,350 mm ? Frame height above cab: up to 4,000 mm ? Frame longitudinal member thickness: 8 mm ? Frame end: straight Axles ? Front axle: 9,200 kg, steered, HydroDrive without through drive ? Rear axle: 13,000 kg, HY axle, not steered, without through drive ? Tag axle: 9,000 kg, steered, liftable, not driven ? Axle ratio: i = 3.70 Air suspension ? Electronically controlled air suspension (ECAS) on tag axle ? Automatic level adjustment ? Spring capacities: VA 9,500 kg / HA 13,000 kg / NA 8,000 kg Brakes ? Electronic brake system (EBS) ? ABS, ASR ? High-performance engine brake MAN EVBec (stepped) ? Disc brakes on all axles ? Electronic parking brake Tires and rims ? Front axle: 385/55 R22.5, steel rims 11.75x22.5 ? Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 ? Tag axle: Michelin 315/70 R22.5, Alcoa matte Cab ? Type: FN, flexible, narrow, normal height ? Comfort seats: air-sprung, seat heating, armrest ? Multifunction steering wheel ? Central locking ? Climatronic air conditioning system ? Lower comfort bunk ? Storage space in seat console and storage compartments ? Interior styling: Moon Grey ? Sun visors, tilting roof ? Various storage compartments ? USB sockets ? LED lighting Permissible loads ? Technically permissible gross weight: 26,000 kg ? Axle loads: VA 9,000 kg / HA 11,500 kg / NA 7,500 kg ? Technically permissible trailer load: max. 30,000 kg Tanks ? Fuel tank: 400 l ? AdBlue tank: 60 l Driver assistance systems ? ESP, ASR, cruise control ? Emergency brake assist Bjdpfx Aey Sqqqol Asln ? Lane departure warning ? Digital tachograph ? Advanced navigation system (7 inches) ? MAN SmartSelect Interface for superstructures ? Pre-installation for crane mounting ? Trailer coupling: RINGFEDER Type 4040G150A ? Various electrical and pneumatic connections Special features ? HydroDrive: Hydraulic front-wheel drive for more traction ? Comfort features for the driver ? Factory interfaces and pre-installations for municipal, construction, and emergency services as well as flexible superstructures - FASSI loading crane F545RA.2 xe-dynamic base unit ? Type: F545RA.2 xe-dynamic ? CE directive EN 12999 HD5S2 compliant ? Color: RAL 3020 traffic red, cylinders black Slewing range ? Continuously rotatable Hydraulics ? Double-acting hydraulic cylinders ? Piston rods hard chrome-plated Joint system ? Double knee lever system with PROLINK ? Knuckle arm can be extended by up to 15° Overload protection ? Electronic overload cut-out FX500 ? FSC stability control ? LMB II ? Emergency shutdown and optical alarm Valves & filters ? Pressure relief and holding valves ? High-pressure filter ? Separate hydraulic tank 180 l with filter and oil cooler on the base Control ? FASSI radio remote control RCH/RCS ? Display of pressure values ? Danfoss D850 control block with 4 control valves ? Emergency operation Outriggers ? Hydraulically extendable on both sides ? Outrigger width: 7.79 m Speed control ? Dynamic Control - load-depen

Condition: used, Applicable material: Hay Bjdpfszgw Amsx Al Asln

Condition: excellent (used), mileage: 1 km, power: 132 kW (179.47 HP), first registration: 06/2023, fuel type: diesel, fuel: diesel, color: silver, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2026, Number of doors: 5 Cab: standard Technical condition: very good Optical condition: very good Damage: none Warranty: none Price: upon request Value-added tax/differential taxation: VAT deductible Bedjzlil Dopfx Al Aeln

Condition: excellent (used), mileage: 1 km, power: 96 kW (130.52 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, number of seats: 3, Year of construction: 2026, Number of doors: 5 Cab: standard Emission class: Euro 0 Technical condition: very good Optical condition: very good Damage: none Warranty: None Price: On request Bjdpfxszli S Rs Al Ajln VAT/differential tax: VAT deductible

Condition: excellent (used), mileage: 19,453 km, power: 74 kW (100.61 HP), first registration: 05/2024, fuel type: diesel, fuel: diesel, color: silver, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2024, Number of doors: 5 Cab type: single Number of cylinders: 4 Bsdpfx Ajw T Szlol Aoln Engine displacement: 1,500 cc Technical condition: very good Optical condition: very good Damages: none Warranty: none

Condition: new, Year of construction: 2022, Working width: 520 mm Planer head: Tersa Number of knives: 4 Jointer table length: 3000 mm Jointer table adjustment: motorized Chip removal display: Digital Adjustable jointer fence angle: yes Motor power: 7 kW Dust extraction port: 120 mm Machine length: 3005 mm Machine width: 1460 mm Weight: 870 kg Bljdpfx Aljiqg Nws Aen

Year of construction: 2002, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V02SC0039, System Ceramics Spa – EASYLINE F50V60 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: EASYLINE F50V60 Condition: Used – fully refurbished Status: In good working condition Automatic system designed for checking the dimensional quality of tiles and subsequent boxing. Technical information: Bjdpez Df Ucefx Al Aoln * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Year of construction: 2013, condition: ready for operation (used), A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Bljdpewxxwrjfx Al Ajn

Condition: used, mileage: 671,300 km, power: 375 kW (509.86 HP), first registration: 04/2017, fuel type: diesel, empty load weight: 8,042 kg, overall weight: 18,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 2 axles, wheelbase: 3,800 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6c, suspension: steel-air, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, retarder, traction control, Urea tank (AdBlue) Engine displacement: 12,902 cc Hydraulics (auxiliary drive) Distance warning system Compressor Low noise Alloy wheels Payload: 9,958 kg Bjdpozvyhwsfx Al Ajln Automatic climate control Compressor RTI PULS SILENCER 550 Type CMAX 3 Sun visor Light bar Rotating beacon Air horns 2 bunks Cooler box Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1978, grinding length 500 mm Blodezbczropfx Al Aen grinding width 200 mm

Condition: new, Immediately available Fassi cranes in the respective variants: - Fassi F135 A.0.24 (4-stage hydraulic extension) Bljdpfx Ajzln Ttol Aon - Fassi F235 A.2.24 (4-stage hydraulic extension) - Fassi F235 A.2.26 (6-stage hydraulic extension) - Fassi F255 A.2.24 (4-stage hydraulic extension) - Fassi F255 A.2.26 (6-stage hydraulic extension) - Fassi F545 RA2.28 (8-stage hydraulic extension) incl. additional support outriggers Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for, e.g., grapple or clamp (5th & 6th control circuit), except for the F545 - Hydraulically operated outriggers, controllable via remote control - LED work lights - Scanreco remote control with cross lever, charger, and carrying straps - Electronic overload cut-off system - Emergency stop and optical alarm (90% and 100%), including adjustable digital swing limit - FASSI stability control FSC including LMB II - From F235 size onwards, double knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th stages available at an extra cost (can be ordered individually for each crane) - For the Fassi F545 series = Includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible through one of our financing partners. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further information = Price: On request

Year of construction: 2019, operating hours: 5,000 h, condition: used, functionality: fully functional, machine/vehicle number: F55 SV 078M, Oven Bsdpfszxw Dbsx Al Aeln - Manufacturer: Themor Flux - Model: F 55 - Hot air wood-burning stove - Year of manufacture/purchase: 2019 - Used sparingly - Well-maintained condition - Ideal for heating larger rooms, workshops, halls or similar buildings Döring stainless steel chimney - Manufacturer: Döring - Double-walled stainless steel system - Diameter: approx. 160 mm - Total installed height to date: approx. 10.60 m - Several 1-meter pipe extensions available - Including inspection/cleaning element - Including connection/T-piece - Numerous matching wall brackets and connecting clamps - Additional available mounting material will be included - The chimney was mounted on a building and can be reused accordingly

Condition: used, mileage: 538,800 km, power: 390 kW (530.25 HP), first registration: 03/2021, fuel type: diesel, empty load weight: 7,736 kg, overall weight: 18,000 kg, tire size: 315/80 R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: steel-air, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, onboard computer, parking heater, retarder, traction control, Urea tank (AdBlue) Engine displacement: 12,902 cc Bedszw Hhmspfx Al Asln Hydraulics (auxiliary drive) Tipping hydraulics Distance warning system Low-noise Payload: 10,164 kg Push-floor hydraulics Long-haul cab Automatic climate control Sun visor 2 bunks Cooler box Cab with air suspension Subject to errors.

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series -Dimensions: 200/50/H110 mm -Weight: 0.4 kg Bodpfsgqg H Rex Al Aoln

Condition: used, Three-phase motor, electric motor -Voltage: 220 V Blodpfx Aledzzhxe Aon -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type Peflex ESF 3/1 A21 015 beige M2 FG -Item: 513334 -Width: 50mm -Length: 50000 mm -Thickness: 1mm Bodpfxsirf Evs Al Aeln -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 240 x 50 mm -Weight: 1.9 kg/pc.

Condition: ready for operation (used), Siemens 6FC5303-0AF50-3DA0 Sinumerik MCP 434C-M Slimline 3 PIN DMG, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bljdpfxoi Ed D To Al Aen

Condition: good (used), PLC controller, central processing unit, working memory, CPU, central processing unit, central device, Simotion, motion controller, Simovert Masterdrives motion control, Profibus CBP2, Comm board, communication module -Manufacturer: Siemens, Simovert Masterdrives Motion Control -Type: 6SE7090-0XX84-OFF5 -Dimensions: 140/115/H25 mm Blodpfohz Rftsx Al Aon -Weight: 0.1 kg

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer SEW type: RF53V D 80 N-6 RK -Gearbox manufacturer SEW type: RF53 RK1 -Motor power: 0.55 kW Blsdpfocg N S Tsx Al Aon -Speed range adjustable: 4.4-26 rpm -Construction: B5 -Drive shaft: Ø 30 mm -Protection class: IP 44 -Dimensions: 580/400/H210 mm -Weight: 41 kg