Used Heuft Inline Ir Empty Bottle Inspector (2013) for sale (10,264)

Condition: used, Year of construction: 1984, Technical details: drum revolutions: 16 rpm U/min speed down: min./max.: 0,23 / 0,34 m/sec. operating pressure: 85,3 Psi - ca. 6 bar bar traction force - max.: 15 traction force: min: 10 kN weight: 389 kg dimensions L x W x H: 1,1x0,9x0,75 m - pneumatic rope winch - stable steel construction - floor plates size: 700x340mm - display via manometer - pressure connection via 1 inch thread - drum brake - dimension of the rope drum: Ø 400 x Ø 250 x 230mm - without rope!!!! Dujdpju Nv Ubefx Adcou *

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty Container Handler Load center: 1220 mm Mast type: Duplex Transmission: ZF WG211 automatic, 5/3 gears Condition: Operational and fully functional Technical condition: Very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% Dujdoy Rvi Aspfx Adcsu ELME 584 sidespreader, 20ft-40ft, equipped with hooks and hydraulic clamp for double box lifting, +/-3° lateral tilt compensation, hydraulic sideshift +/- 600 mm Hydraulic, extendable spreader support on lifting frame, lift suspension via hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast tilt, and if container(s) are clamped, engine preheater (230V), "one-touch" joystick function for automatic spreader adjustment (20'–40'), operator cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating. Safety features: - Hydraulic spreader support on lift mast (for container checker safety) - Lifting suspension by hydraulic accumulator - Central greasing system - Engine preheater (230V) - Air conditioning - Drive speed limitation depending on lifting height and mast tilt angle - One-touch joystick function for automatic spreader adjustment (20–40ft) - Air-suspended, heated driver's seat - Sun blinds at roof and rear windows Condition: inspected, repaired, serviced, and cleaned; ready for work.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 13,000 h, load capacity: 9,000 kg, lifting height: 16,332 mm, fuel type: diesel, mast type: duplex, power: 180 kW (244.73 HP), drive type: Diesel, Empty container handler Load centre: 1220 Mast type: Duplex Transmission: ZF 5WG211 automatic Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: pneumatic Front tyres size: 14.00-24 Rear tyres type: pneumatic Dusdpfx Aoy Rvivjdceu Rear tyres size: 14.00-24 20-40 spreader 584LF 6+1 high stacking

Condition: good (used), IR thermography system, brand: Thermo Sensorik Model: Thermo Spector Year of manufacture: 12/09 Scope of delivery: 1x InSb 640 SM thermographic camera (serial number 0001983179, format 640x512 pixels) with power supply and temperature display 1x Light box with power distribution unit and vacuum distribution unit on a motorized table, height-adjustable stand with cable winch for the IR camera 1x Thermal test plate (temperature-controlled solar cells - contact unit) with vacuum suction, temperature control unit and electrical excitation (thermostat and vacuum pump not included) 1x Control system includes: Djdjzcmldepfx Adcsuu - LED matrix control - power supply for 6 LEDs (Thermo Sensorik LED Control Unit, S/N 000207013) - Power supply (Thermo Sensorik Power Supply + Multi-I/O-Box, S/N 000196029) - Power source (Höcherl & Hackl NL Series Source & Sink Model NL20V20C20) - Hardware includes a PC-compatible computer with camera interface, MPS5 software and Lock_In Suite software - Monitor, keyboard, mouse, manual

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Dusdskucxljpfx Adcsu Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Dusdsdzzyfepfx Adcsu

Condition: good (used), functionality: fully functional, Year of construction: 2013, load capacity: 200 kg, lifting height: 12,200 mm, lifting power: 200 kg/m, platform length: 1,100 mm, platform width: 650 mm, overall weight: 2,735 kg, construction height: 1,900 mm, fuel type: electric, tire condition: 100 %, color: blue, === KEY SPECIFICATIONS === Year: 2013 Working hours: On request Working height: 12.20 m Max. horizontal reach: 6.10 m Platform capacity: 200 kg Platform dimensions (L x W): approx. 1.10 x 0.65 m Superstructure rotation: 360° Platform rotation: Yes Boom type: Articulated Jib: Yes Drive: Electric Four-wheel drive: No Tyres: Solid / non-marking Stabilisers: No Manufacturer: Niftylift Ltd Country of manufacture: United Kingdom Emission class: Electric (zero emission) Weight: 2,735 kg CE certified: Yes === HIGHLIGHTS === ✔️ Compact articulated boom lift ✔️ Fully electric – zero emissions ✔️ Ideal for indoor and maintenance work ✔️ Lightweight and easy to transport ✔️ Reliable UK manufacturing ✔️ Equipped with new tyres – ready for immediate use === CONDITION === Good working condition – tested and functional Used machine with normal visual wear Inspection possible on request === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price € 17.000 (EXW / excl. VAT) Reliable articulated boom lift with electric drive, ideal for indoor applications and maintenance work. Compact dimensions allow easy operation in confined spaces. All machines are inspected and ready for immediate use. === DELIVERY === Crane loading possible on request Flexible transport options available Handled by Collé Rental & Sales logistics Prijsresultaten Dodpfxsy Dff Hj Adcjuu Prijsresultaten kan geen schatting geven omdat we in de afgelopen twee jaar geen veilingtransacties hebben gevonden voor een 2013 Niftylift HR 12 E | 2013. U kunt de activadetails verfijnen in Prijsresultaten om meer resultaten te z

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: FA58, Used TECMI - Smipack shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for reliable bundling and shrink packaging in high-demand beverage production and industrial packaging environments. Manufactured by TECMI, the model BP802ARV 380R delivers consistent throughput and robust construction suitable for second hand and used bottling line integrations.Manufacturer: TECMIModel: BP802ARV 380RYear: 2013Production speed: 8,000–12,000 bpmFormats: PET 0.38L bottles, 24-pack bundlesContainer types: PET bottlesDimensions (X × Y × Z): 4140 × 3230 × 2095–2255 mmWeight: 1400 kgElectrical data: 440 V, 60 Hz, 27.25 kW, 45 A, 3PH+PEAdvanced Automation & Control SystemsDesigned for automatic operation, the TECMI BP802ARV 380R streamlines pack formation and shrink-wrapping with minimal operator intervention. Its architecture supports precise film handling, consistent sealing, and stable oven performance for uniform pack quality across long shifts. The electrical system is configured for industrial-duty 440 V, 60 Hz power, with optimized energy usage at 27.25 kW. Safety-rated components and clear operator stations help ensure dependable performance with straightforward controls suitable for modern production standards.Production Line Integration CapabilitiesThis shrink wrapper integrates smoothly as a standalone machine or in-line with upstream and downstream bottling equipment, including conveyors, fillers, labelers, and case handling units. It is well-suited to beverage production lines that handle PET bottles and require regular format changes for multi-pack configurations. The machine’s layout accommodates standard conveying interfaces for efficient infeed and discharge, enabling flexible installation within existing packaging machinery cells on used bottling line upgrades.Machine Condition & Maintenance HistoryThe machine is currently in storage, presenting an excellent opportunity for facilities seeking a second hand shrink wrapper ready to be recommissioned. Its year of manufacture (2013) and industrial-grade build provide a solid foundation for reliable operation after standard installation checks and start-up procedures.Operational Performance & VersatilityOptimized for PET bottle bundling in 24-pack configurations, the BP802ARV 380R provides consistent throughput across the 8,000–12,000 bpm range, supporting high-volume beverage production. The shrink tunnel delivers stable temperature control for tight, visually consistent packs. Its design supports common beverage applications where durable film seals and stable packs are critical for downstream palletizing and logistics.Installation Requirements & Site PreparationPlan for a footprint consistent with the layout dimensions (X: 4140 mm, Y: 3230 mm, Z: 2095–2255 mm). Provide a 3-phase 440 V, 60 Hz electrical supply with appropriate protection for a connected load of approximately 27.25 kW and 45 A nominal current. Ensure adequate ventilation around the shrink tunnel and safe access for operators and ma... Dusdpfeyhbh Djx Adcju

Condition: excellent (used), Year of construction: 2007, - Capacity: 10,000 bottles/hour - Year of manufacture: 2007 - Equipped with an ozone generator - Manufacturer: PROMEC - Model: Rotonech - M1110-36 - 2 - Type: Two-channel sterilizer-rinser Dodpozb H Nmefx Adcsuu - With recirculation tank, pump, and filter - Nozzle heads: 36 pieces - With enclosed hood and ozone air extraction - Conveyor height: 1250 mm (including additional base supports) - Bottle formats: from 55 mm to 99.8 mm (total of 20 different bottle types) - Direction of travel: Left to right Dimensions: - Width: 1900 mm - Depth: 2200 mm - Height: 2250 mm - Machine available from the end of July 2026 - Machine in good condition

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED Dodpeyrp Umsfx Adceuu • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, 10 MVA cast resin transformer, 10500 V +- 2x2.5 % / 6000 V, Yy0, year 2013 Dsdetwwm Uopfx Adcsuu

Condition: used, Year of construction: 2015, machine/vehicle number: LC445, Technical Specifications & Performance Data The Used Complete Bottling Line Krones, from the year 2015, is engineered for high-efficiency operations within the beverage production industry. Designed to process up to 48,000 bottles per hour, this second-hand machinery is ideal for medium to large-scale production needs. Production Speed: 48,000 bottles per hour Compatible Bottle Formats: 0.38 L, 0.55 L Container Types: PET Neck Type: 30/25 Machine Components: 12 items Advanced Automation & Control Systems This used bottling line is equipped with advanced automation capabilities and a user-friendly control panel, ensuring high precision in filling, labeling, and capping processes. The line includes integrated safety features, adhering to stringent industrial packaging standards, making it a reliable asset for operators. The electrical systems and automation technologies ensure streamlined operations while maintaining optimal safety and efficiency. Production Line Integration Capabilities Built for flexibility, this bottling line seamlessly integrates with existing production setups, increasing overall efficiency across the board. Its format change capabilities allow for quick adaptation to different bottle sizes and types, ensuring continuous production with minimal downtime. The line supports multi-product flexibility, including various flat drinks and still products, enhancing its versatility in beverage production applications. Machine Condition & Maintenance History This bottling line is in a READY FOR OPERATION condition, expertly maintained to ensure peak performance. With comprehensive manuals available, the transition to operation is smooth and straightforward. Its reliability and operational readiness make it an excellent choice for those seeking second-hand machinery with proven performance history. Operational Performance & Versatility The line's design handles various flat drinks efficiently, with PET containers being the primary material. Its versatility extends to two main bottle sizes, delivering precision and quality across different product types. The machinery's capability to process both 0.38 L and 0.55 L bottles with consistent performance makes it an invaluable asset for beverage producers looking to expand their product range into still products. Installation Requirements & Site Preparation Proper space and utility setup are critical for the successful installation of this comprehensive bottling line. Adequate site preparation will ensure optimal performance, aligning with industrial standards for space utilization and utility support. Proper consultancy can aid in identifying specific spatial and operational requirements. Safety Standards & Compliance Certification Dedpfx Adjvlwpujcjuu Adhering to global safety standards, the bottling line includes extensive safety guards and protections to safeguard operators. Designed to meet high hygiene standards, it ensures that all bottling processes comply with necessary health and safety protocols, making it suitable for the most demanding industrial environments.

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Dodpou Thpnjfx Adceuu Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Year of construction: 2013, condition: good (used), functionality: fully functional, Capacity: 9,000 bottles/hour Products: Milk, yogurt, probiotic and protein drinks Bottle volume: 150 ml Dujdpfx Adsy Uy Iqoceu The system consists of the following components: AUGENSTEIN washing machine (year of manufacture 2006) DECKERT bottle filling machine (year of manufacture 2003) ALCOA/Augenstein cup feeding and application system (years of manufacture 2003/2008) PACE bottle feeding and positioning unit (year of manufacture 2004) SLEEVER INTERNATIONAL pouch machine with steam tunnel (year of manufacture 2013) METTLER TOLEDO 3-scale and metal detector (year of manufacture 2008) Condition: used, fully functional

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls Dsdpfx Ajy Dvlkjdcjuu

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Dujdpfxowr T E Ds Adcju Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: used, mileage: 920,917 km, power: 302 kW (410.61 HP), first registration: 03/2013, fuel type: diesel, tire size: 315/60 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, total length: 6,100 mm, total width: 2,500 mm, total height: 3,600 mm, Year of construction: 2013, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fog lights, fridge, power assisted steering, retarder, = Additional options and accessories = - Aluminum fuel tank Dodpey Rz Ecsfx Adcouu - Air-suspended seats - Sleeper cab - Sun visor = Further information = Tyre size: 315/60 R22.5 Front axle: Steered; Suspension: Parabolic suspension Rear axle: Twin tyres; Suspension: Air suspension Unladen weight: 8,215 kg Reference number: 37

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees Dujdpfx Adsv Sbmqocsu max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 2013, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces. Duedeylkvlopfx Adcsu Probe, Automatic central lubrication, Coolant system for dielectric fluid, Automatic fire extinguishing system, Mist extractor, Machine lamp. Cutter outside diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outside diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm Tool weight: max. 20 kg X axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis rotation range: 360 ° E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2280 mm Weight approx.: 4800 kg Connected load: 5,4 kW colour: gray RAL 7035/7043

Condition: like new (used), Reimelt RS2A Inline sifter Rotation sifter for sifting out impurities, breaking lumps and aerating the product, previously used to sift high volumes of flour Dujdpfx Adjk S Ewgscju

Condition: used, mileage: 878,129 km, power: 310 kW (421.48 HP), first registration: 05/2013, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Axle load measuring device, front axle load 8.0 t, start-assist with timer control, work lights, exhaust downwards to the right, right-hand exterior mirror with manoeuvring position, CB radio, compressed air connection in cab, high-pressure air unit, air horn, electrical system and lighting for swap body frame, cab with steel suspension, standard, fire extinguisher, Fleetboard vehicle computer, fuel tank: 630 litres aluminium, air intake on side of cab, roof air deflector (latchable, without base trim), 2-cylinder air compressor, tyre pressure monitoring system, side spare wheel hoist, retarder, acoustic reversing warning (external warning signal), tail lift switch, drawers under the window sill, circuit breaker, sunblind for side window, driver’s door, extra 24V socket in front passenger footwell, Fleetboard preparation. Additional equipment: Dusdpferx Ndtjx Adceu Axle configuration: 6x2, Actros, trailer brake 2-line system, connectors left, trailer socket 24V / 15-pin, audio system: radio with USB connection, electrically adjustable and heated exterior mirrors, functional passenger seat, rear axle differential lock, steel air tank, EURO 6 engine, cab width: 2.30 m, cab: L StreamSpace, cab floor with 170 mm engine tunnel, foldable driver's seat back, suspension: air / air (full air suspension), electric window lifters, tinted windscreen, 100 A alternator, 12-speed gearbox – Type: G 211-12, AdBlue tank: 60 litres, rear axle crown wheel 440, info display 10.4 cm with additional indicator, body/chassis: chassis frame, lower comfort bunk, comfort central locking, communication interface, radiator louvre, regulated power steering pump, liftable trailing axle, engine 12.8 L – 310 kW R6 diesel (OM 471), engine brake, engine compartment encapsulation, single-tyred trailing axle, ramp mirror, spare wheel, residual heat utilisation, disc brakes front and rear axle, standard air-sprung driver’s seat, seat cover/upholstery: fabric, voltage converter 24V / 12V 10A, front splash guard, front axle stabiliser, additional stabiliser, rear/trailing axle, external storage flap left, 24V socket in cab, tachograph / EC control unit, cab door extension, aerodynamically shaped underbody cladding, front underrun protection, toll system preparation, drop-centre front axle, regulated water pump, permissible gross weight 25.00 t, auxiliary heater (water). * WDB9630201L747236 * First registration: 15.05.2013 * Chassis length: 7.10 m * Wheelbase: 4600 / 1350 mm * Net price! * All information provided without guarantee or warranty. Tel./WhatsApp:

Condition: used, maximum load weight: 26,700 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 02/2013, * Schmitz Cargobull Gotha SKI 18 SL * Rear tipper (half-pipe) * 2-axle * VIN: WSK000001270258 * Unladen weight: 5,800 kg * Payload: 26,700 kg * Gross weight: 32,500 kg * Kingpin load: 26,700 kg * Axle load: 9,000 / 9,000 kg * Trailer length: 8,775 mm Dedpslhp Rzsfx Adcsuu * Trailer width: 2,550 mm * Trailer height: 3,280 mm * Tyres: 385 / 65 R 22.5 * Price on request * All information subject to change, errors excepted * Internal number: 0376 Tel./WhatsApp:

Condition: used, mileage: 1,050,000 km, power: 324 kW (440.52 HP), first registration: 07/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), Tel.: call (Contact · Telephone · Mobile · WhatsApp) Special equipment: Storage box, Aero kit, car phone antenna, exterior mirror and wide-angle mirror, electrically adjustable and heated, mechanical battery master switch, curb mirror right side, electrically adjustable and heated, CB radio roof antenna, aluminum air tanks, cab with air suspension, driver’s seat comfort version, air-suspended and heated, with lumbar support and shoulder adjustment, flame-start system, generator 28 V / 120 A, 12-speed gearbox – type: ZF 12 AS, Tipmatic, controlled rocker brake EVBec, single-cylinder air compressor 360 cc with Air Pressure Management (APM), heated air dryer, additional air heater Eberspächer Airtronic D2, PTO NH/4C without flange, cab door extension, additional high-beam/fog lights with cornering light Additional equipment: Dujdoxtd Euepfx Adcsu Axle configuration: 4x2, ambient lighting, maneuvering/front mirror, trailer socket 24V / 7-pin, trailer ABS socket, anti-slip regulation (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, battery 175 Ah, onboard computer MAN-Tronic, rear axle differential lock, electronic braking system MAN Brakematic, EURO 6 engine, cab: Nordic insulation, cab: XLX, suspension: leaf / air, electric windows, remote central locking, tinted windshield, manual sunroof, body/chassis: tractor unit, rocker brake EVB, automatic climate control, heated fuel filter, fuel tank: combo tank – 400 l diesel + 60 l urea solution (AdBlue), multifunction steering wheel, raised air intake, engine 12.4 l – 324 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side-mounted spare wheel carrier, fifth wheel: Jost JSK 37 C, rear axle disc brakes, front axle disc brakes, rear side windows tinted, seat cover/upholstery: comfort quality, sun visor for windshield, sun visor for side window, driver’s door, spray suppression, rear axle stabilizer, front axle stabilizer, externally accessible storage box, tinted door windows, viscous fan, central locking, permissible gross weight 18.00 t * WMA06XZZ3EM631143 * Connecting rod bearing defective * Crankshaft ground, all components reassembled * Net price! * All information without guarantee

Condition: used, mileage: 954,025 km, power: 260 kW (353.50 HP), first registration: 05/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, Special equipment: Front axle load 8.0 t, trailer brake 2-line system, connections on the left, audio system: CD radio, compressed air connection in driver's cab, air horn, electrical system and lights for swap body frame, cab floor with 170 mm engine tunnel, tinted windscreen, 10.4 cm info display with additional indicator, 3-piece mudguards, fuel tank: 500 L aluminum, reinforced engine brake, revolving beacon, acoustic reversing warning (external warning signal), tail lift switch, drawers under railing, seats in cab: driver's comfort air suspension seat, exterior sun visor, additional 24V socket in passenger footwell, Fleetboard preparation, preparation for cooler / refrigerator. Further equipment: Duedpoqnqy Tsfx Adceu EURO 6 emission standard, axle configuration: 4x2, Actros 4, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, rear axle differential lock, steel compressed air tank, medium compressed air unit, cab: width 2.30 m, cab: L StreamSpace, cab: steel suspension, comfort, suspension: air / air (full air), electric windows, generator 100 A, 8-speed transmission - type: G 140-8, urea tank (AdBlue): 60 L, rear axle crown wheel 440, body/chassis: chassis, lower comfort berth, comfort locking system, communication interface, unregulated power steering pump, 2-stage air compressor, engine 7.7 L - 260 kW R6 diesel (OM 936), engine compartment encapsulation, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat upholstery: fabric, seats in cab: passenger function seat, seats in cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, front splash guard, front axle stabilizer, external storage flap left, external storage flap right, 24V socket in cab, tachograph / EC control device, cab door extension, aerodynamically shaped underbody panel, front underrun protection, CB radio prep, toll prep, cranked front axle, permitted total weight 18.00 t, additional water heater. * VIN: WDB9630031L763095 * Sleeper cab * Vehicle length: 9600 mm * Vehicle width: 2550 mm * Vehicle height: 4000 mm * Tail lift * TÜV valid until 05/2022 * Net price * All information without guarantee Tel./WhatsApp:

Condition: excellent (used), functionality: fully functional, Silverson 150l Inline Lab Mixer With Brook Hansen 0.75kW Motor Complete on trolly for easy transportation. Removed from "blue chip" pharma company in Cork. IE Dsdpsym Al Isfx Adcsuu