Used Holzing Edgebander Holzing G-Max 380 for sale (57,902)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Pedpfx Amjza Aiyj Topw Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Ppsdoza Agrjpfx Am Tow Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h

Condition: excellent (used), machine/vehicle number: YS2R4X20001253740, mileage: 827,465 km, power: 279 kW (379.33 HP), first registration: 10/1999, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 3,700 mm, Year of construction: 1999, Equipment: ABS, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Disc brakes - Front suspension: Leaf - Open roof - Rear suspension: Air - Sleeper cabin - Sper Pedpfxoy Ed Hrj Am Tepw = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: refurbished (used), Year of construction: 1977, turning diameter: 16,000 mm, faceplate diameter: 6,300 mm, year of last overhaul: 2026, Completely overhauled single-column vertical turning lathe, Blansko model SKSJ 1A, equipped with one vertical head for turning and milling operations. Technical specifications: Faceplate diameter: 6300 mm Maximum workpiece height: 4800 mm Max. turning diameter with column near the faceplate: 8000 mm Max. workpiece diameter: 14700 mm Max. workpiece diameter for internal turning: 16000 mm Ppjdezi S Tlepfx Am Tsw Infinitely variable faceplate rotation: 0.5 – 20 rpm Max. workpiece weight: 100 tons Milling spindle max. speed: 1500 rpm 2-speed gearbox with 15 kW Siemens motor Manual clamping, ISO 50 taper tool Machine weight: approx. 220 tons The machine was completely overhauled in 2025 and supplied with the following brand-new components: - New electrical cabinet made with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 numerical control, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers with a 1/5 ratio - New ballscrews on 2 axes (vertical head and crossrail) - New scales on 2 axes, Heidenhain - The hydraulic and support systems made with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New lubrication system, DROPSA-Italy or similar For more information, please contact us.

Condition: used, mileage: 474,536 km, power: 368 kW (500.34 HP), first registration: 11/2021, fuel type: diesel, axle configuration: 2 axles, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, navigation system, parking heater, EURO6 ABS, Ppodpfx Aszh R T Uem Tew ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck stationary climate

Condition: used, mileage: 337,816 km, power: 368 kW (500.34 HP), first registration: 11/2021, fuel type: diesel, axle configuration: 2 axles, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, navigation system, parking heater, EURO6 ABS, ASR, Pjdpfx Amszhqi As Tjpw emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck stationary climate

Condition: used, power: 368 kW (500.34 HP), fuel type: diesel, empty load weight: 19,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, PRIVATE NEGOTIATION. The price does not include VAT, vehicle registration tax (IPT), or handling fees (MSS). VEHICLE OPTIONS: - Power take-off (PTO); - ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) Offer valid for contracts and/or registrations completed by 04/30/2026, subject to approval. - We accept trade-ins of any vehicle, subject to appraisal. - Financing or leasing solutions available for any amount, tailored to the customer's needs. We are EXPERTS in remote negotiations, offering you the best solution to purchase our vehicles even if you live far from the province of Bergamo. Please verify the features of the advertised vehicle. Lodotruck S.r.l. disclaims any responsibility for any unintentional discrepancies in the listing description. Podpoq Rwydefx Am Tepw If you are interested in the vehicle, please include your city and telephone number in your reply to the advert. In case of a trade-in, please specify: make, model, color, month and year of registration, mileage, main accessories, gearbox, KW/HP, and the condition of the vehicle (preferably with attached photos). With this information, we can reply to you more quickly. Contact us at

Condition: new, turning length 1000 mm turning diameter 380 mm Ppedpfjxabv Rsx Am Tjw turning dia. in gap 490 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Condition: good (used), mileage: 376,299 km, power: 279 kW (379.33 HP), first registration: 08/2005, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, Year of construction: 2005, Equipment: ABS, differential lock, = Additional Options and Accessories = - Speed limiter - Power take-off (PTO) = Remarks = Ppsdpowwtiaefx Am Tjw DAF CF 380 6x2 Roadcleaner Bekker Lagram High pressure pump Uraca P3-10 Centrifugal pump ZLKD 100/200 Good working condition = Further Information = Axle configuration Front axle: Steerable; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf suspension Rear axle 1: Steerable; Tire tread left: 40%; Tire tread right: 40%; Suspension: air suspension Rear axle 2: Twin tires; Differential lock; Tire tread inner left: 60%; Tire tread outer left: 60%; Tire tread inner right: 60%; Tire tread outer right: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 18,580 kg Payload: 7,420 kg Gross vehicle weight: 26,000 kg Condition Technical condition: good Visual condition: good Damages: none Further information For more information, please contact Gerrit Haverhoek or Piet Haverhoek.

Condition: like new (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KRG99717, mileage: 98,000 km, power: 367.75 kW (500.00 HP), first registration: 10/2024, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: intarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, cruise control, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, NM0KCXTP6KRG99717 - reference PT-068 - Warranty until 9/10/2027 STANDARD EQUIPMENT: 2 air suspension (C2AS) ▪ Air-sprung cabin ▪ Automatic climate control ▪ Bed zone remote control ▪ black grille ▪ body-coloured exterior mirror cap ▪ Body-coloured front bumper ▪ body-coloured bonnet ▪ cruise control & speed limiter ▪ driver's seat - heated & air suspension ▪ Dry air cabin heating ▪ EBS (electronic braking system) ▪ Electrically heated and electrically adjustable mirrors ▪ Electrically operated sliding roof ▪ front & rear protection against underruns ▪ long front bumper ▪ switchable air compressor ▪ maintenance-free front wheel bearing ▪ wheel chock ▪ DAB radio ▪ 2.47 FDR ▪ 210 Ah (AGM battery) OPTIONAL EQUIPMENT: F-Max Select with 1050L Fuel Tank ▪ Hydraulic Retarder (Intarder) ▪ NH4C PTO ▪ Technology Package 5: Refrigerator, Navigation, Adaptive Cruise Control, Predictive Cruise Control, Exterior Sun Visor, LED Headlights, Black Rims, Side Skirts, Lane Keeping Aid ▪ Fifth Wheel 1100mm ▪ 315/70 LRR Michelin Tires Discover our dealers via the website fordtrucksbelux.be Podpfx Amswf Nn Uo Tjpw Interested? Feel free to contact us: - Herman Noyens Trucks NV

Condition: good (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KNA91371, mileage: 149,663 km, power: 367.75 kW (500.00 HP), first registration: 06/2023, fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 3,750 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, airbag, cruise control, hydraulics, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, NM0KCXTP6KNA91371 ▪ 1 Year Warranty STANDARD EQUIPMENT: Automated transmission ▪ 225 Ah battery ▪ C2AS air suspension ▪ Air-sprung cabin ▪ Automatic climate control unit ▪ Bed remote control system ▪ Black grille ▪ Body-coloured exterior door handle ▪ Body-coloured door mirror trims ▪ Body-coloured front bumper ▪ Body-coloured bonnet ▪ Adaptive Cruise Control & Speed Limiter ( ACC ) ▪ Driver's seat - Heated & air-sprung ▪ Dry heater ▪ EBS (Electronic Braking System) ▪ Electrically heated and electrically adjustable mirrors ▪ Electrically operated sunroof ▪ Front and rear underrun protection ▪ Instrument cluster with 8" screen ▪ Lane departure warning system (LDWS) ▪ Long front bumper ▪ Switchable air compressor ▪ AEBS (advanced emergency braking system) ▪ Maintenance-free front wheel bearings OPTIONAL EQUIPMENT: Comfort Pack 1, Refrigerator, Navigation, Passenger seat armrests, PCC (Predictive Cruise Control) ▪ LED Headlights ▪ NH4C PTO ▪ JOST Fifth wheel 1250m ▪ 19T MTM ▪ 315/80 Tires ▪ 1350L fuel tank Ppjdewqq Dbjpfx Am Tsw ATTENTION: The F-Max is delivered without tipper hydraulics, these have been removed from the vehicle. Discover our dealers via the website fordtrucksbelux.be Interested? Feel free to contact us: - Herman Noyens Trucks NV

Condition: used, mileage: 61,636 km, power: 368 kW (500.34 HP), first registration: 09/2024, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, EURO6 Ppsdpfx Aszf Tp Tjm Tew ABS, ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain,new engine, new clutch,Warranty and maintenance (service) contract up to its 4 years old.Enginne changed, Maintenance contract until 10.09.2028.

Condition: used, maximum load weight: 44,420 kg, overall weight: 53,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 11,500 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Cargo Area: * Cargo deck with approximately 30 mm thick hardwood floor * 9 pairs of folding lashing rings (LC 10,000 daN) * 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes Landing Legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data. Axles and Suspension: * BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable * Air suspension with raise and lower valve Braking System: Ppsdpsyu Eu Isfx Am Tsw * WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Electrical System: * Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically blast-cleaned after welding using a shot-blasting system * Second blast cleaning with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Rims painted silver-grey * Paint system tested by salt spray test to ISO 9227-NSS * Sealant wax applied to cavities Included Accessories: * Cargo deck with approx. 30 mm thick hardwood floor * 2” kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * At galvanized front connection bar: DUOMATIC air couplings * Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear * At gooseneck and rear plate, left and right, each with a holder for warning plates including socket * White reflective tape according to EU regulations on sides and red at the rear * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck * European reflective markers (red/yellow) on trailer rear * Bracket for rotating beacon at the rear of trailer * Mudflap at the rear of trailer * Manual and documentation on USB stick * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard * 4 wheel chocks with holder at front wall * Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit) * Electro-hydraulic power pack * 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes * One INOX toolbox, approx. 1,200 x 460 x 55

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes Ppedpfx Aoxttc Aom Tew * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 Ppsdpfxecmr D Hj Am Tsw burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: used, first registration: 02/2023, We manufacture your containers as required. Building site containers storage containers Ppjdpetq Nx Njfx Am Tew material containers storage containers. Manufactured in Germany.

Condition: new, functionality: fully functional, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, total length: 13,000 mm, total width: 3,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, GS13030CS MAX Ultra-Large Format Single-Platform Sheet Cutting Machine Smooth and delicate cutting section, burr-free Equipped with bevel cutting head and system Pjdev Hnpzopfx Am Tjpw High-quality modular drag chain cables Beam safety light curtain Fully automatic grease injection system

Condition: used, mileage: 573,000 km, power: 279 kW (379.33 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 7,400 mm, loading space width: 2,530 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, Renault T 380 Platform 7,40 m + CRANE + REMONTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2016 ? MILAGE: 573 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 740 x 253 (L x W ) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 525/134 cm TIRE SIZE: 315/70R22,5 FRONT : SPRING BACK : AIR Pjdpjzc Tzxsfx Am Tjpw CRANE: FASSI F120 B.2.22 + REMOTNE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 1719

Condition: used, mileage: 573,000 km, power: 279 kW (379.33 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 7,400 mm, loading space width: 2,530 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, Renault T 380 Platform 7,40 m + CRANE + REMONTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2016 ? MILAGE: 573 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 740 x 253 (L x W ) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 525/134 cm TIRE SIZE: 315/70R22,5 FRONT : SPRING BACK : AIR CRANE: FASSI F120 B.2.22 + REMOTNE CONTROL Ppsdpfozc Tzlsx Am Tew TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 1719

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, NEXUS: Pjdpfx Aozphlwjm Tepw Trusted by Professionals Proven Performance in Contour Edge Banding A proven contour edge banding machine designed for easy operation by users of all experience levels. Continuously improved through real customer feedback, NEXUS incorporates innovative features that significantly increase the speed and efficiency of your production process. Key innovations include a 3D laser scanning system that accurately copies the panel contour and measures the required edge band length with millimetric precision, a chassis-integrated edge band roll feeding table, and convenient automatic or manual operating modes selected through the touchscreen control panel.

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2126, functionality: fully functional, Equipment: documentation/manual, Element feeding and retrieval - Clamping beam with clamping strip Ppedpoza D E Aofx Am Tow - Preparation for connecting a return system - Variable feed rate: 8-18 m/min - Automatically adjustable guide rail for groove, height of clamping beam, and clamping zone Edge banding - AQ65 glue pot - PUR pre-melter, 8 kg/h - Finishing of the element - Anti-adhesive and cleaning fluid - Unit for processing corners with a double profile FLEXTRIM - Cutting unit - Multifunctional unit for profiling with R-2 and R-1 tools - Edge milling unit with R-2 and R-1 tools - Flat profiling, polishing unit (top and bottom) Documentation - Selected languages: Croatian - Format: Data carrier + paper documentation General information - Control system: HOMAG POWERTOUCH control system - CE marking: YES - Commissioning status: Pending – planned date: June 2026 - Machine length: 6075 mm - Year: 2018 - Number of processed meters: 2.5 million

Condition: new, Year of construction: 2025, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Pro Three-head machine: 2x CMYK + 4x White + 4x Varnish A flexibility powerhouse – color + white + varnish function Print heads: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV / 18 channels) Ppodpfjfvyacex Am Tew 720x1080 / 720x1440 / 720x2160 dpi Includes software for printer operation and image editing Weight: 99 kg Operating display Vacuum air table – for securing light materials Table movement via screw mechanism 360-degree operation available upon request: for large, round bottles and objects A2 size: 45x65 cm and 20 cm printing height Printer dimensions: 1000x980x650 mm Water circulation cooling system Software settings and printer instructions are available upon request. Germany/Europe-wide.

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Ppjdpfx Aovwfqwom Tow

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Pedpfxexy Ng Re Am Topw Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package Psdoyzz Irepfx Am Tspw • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.