Used Hydraulic Drive for sale (33,613)

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.809, Offer 25079 Technical specifications: - Max. working width 3100 mm - Max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1° 30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-down clamps: 14 - Motorized backgauge - Electric foot switch Ledpfx Ansv Nkdmjxjhl - Front angle stop - Stroke rate 15 per minute - Drive 380 V / 22 kW - Table height 800 mm - Space required including backgauge, without front support arms - Approx. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Ledpez Ai T Asfx Anxjhl 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Lhsdpfsz Ai U Tex Anxsl Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Lhodpfx Anoz Ai T Njxjl Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 15,500 kg, rotor diameter: 800 mm, rotor width: 2,000 mm, power: 250 kW (339.91 HP), rotational speed (max.): 480 rpm, Equipment: rotational speed infinitely variable, Genox GXC2000G Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 250kW Drive Motor with outboard rotor bearings (200kW - 315kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. Ljdpfoz Ai Umex Anxehl 2,000mm wide x 800mm diameter cutting chamber with a choice of either a 5, 7 or 9 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: PD 82 en Multi, Why choose the original Tiger Pile Driver? 1850 strikes per minute assembled in Western Europe drives piles up to 130mm powered by a Honda 4-stroke engine one-person operation ergonomic and durable from €2190.00 excl. VAT The Tiger Multi can drive piles up to 130mm. Demonstration machines/used machines available! The Tiger pile driver runs entirely on gasoline and is easy to operate by one person. This makes the Tiger pile driver very mobile and user-friendly. Because the striking mechanism of the Tiger pile driver is made of double-hardened steel, the quality of this gasoline-powered pile driver is very high. Lhodpfx Aozx Ul Aonxjl It is an extremely powerful machine that is surprisingly lightweight, weighing only 18kg. The Tiger pile driver is powered by a Honda GX35 or GX50 four-stroke engine. This is the highest quality engine for this type of work. The engine is designed to tilt, allowing you to work effectively at any angle. The movement is achieved by air compression generated within the Tiger pile driver itself. This means that the Tiger pile driver does not require any other power source, such as hydraulics or a compressor, and cannot be overloaded. In addition, the Tiger pile driver is incredibly fast, delivering 1850 strikes per minute. To ensure comfortable operation, the Tiger pile driver has internally spring-dampened handles. The Tiger pile driver is designed to perform its job under the most extreme conditions without the need for additional machines or materials. The Tiger pile driver is suitable for both wooden, metal, and plastic piles. With this pile driver, the pile is immediately fixed in the ground, unlike setting it using a ground auger. A major user benefit of the Tiger pile driver is the fact that you can install all types of wooden, steel, and plastic piles up to a diameter of 105 mm. Even square piles of 7x7/8x8 and 9x9 can be installed in this way. The Tiger pile driver was designed with the help of people with more than 20 years of practical experience in driving piles for fencing. The key words here were: fast, lightweight, reliable, and user-friendly. The Tiger pile driver has more than succeeded in these areas. After testing more than 20,000 piles, the Tiger pile driver has proven to be extremely reliable. The assembly in the Netherlands of high-quality components and the drive from a Honda GX35 or GX50 engine ensures a quality product for the professional user. With 3 mobile dealers throughout the country, a rapidly growing network of permanent dealers, and several rental/loan machines in stock.

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Colour: Grey Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional - Drive type: Hydraulic Lodpfx Aeyf Hhwsnxohl - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs Lhjdpfx Aohhc Ixsnxjl - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Condition: used, fuel type: diesel, axle configuration: 4x2, Equipment: ABS, air conditioning, Iveco Eurocargo ML 180-250 – 2018 – Euro 6: - First registration in 2018; - 250 hp engine - Euro 6C; - approximately 306,000 km; - automatic transmission; - rear air suspension; - gross vehicle weight 180 quintals; - payload approximately 101 quintals. Ljdpfxoz Dbx Dj Anxohl Accessories: - air conditioning, electric windows, ABS, air suspension driver's seat, 3 seats in the cab, sun visor, fog lights, cruise control, radio Equipment: - fixed body, 6.44 x 2.48 meters (internal dimensions) with 80 cm aluminum sideboards; - 15 quintal hydraulic folding tail lift. The vehicle is available for inspection and test drive at the following location: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona) Tel. 045-7950955. Please contact us to schedule an appointment to best organize visits to our facility. For further information, technical clarifications, and to learn the vehicle's selling price, please contact our sales managers directly at 045-7950955. Note: Please note that the vehicle description is indicative and may contain errors or inaccuracies. Interested parties are required to verify the exact correspondence of the vehicle's specifications before proceeding with the purchase. PSL Autocarri Srl declines any responsibility for any errors or inconsistencies contained in this descriptive sheet. Note: We only respond to information requests that include the requester's name and phone number.

Condition: good (used), Press force: approx. 6 tons Table size: 400 x 300 mm (W x D) Table opening: Ø 133 mm Ram size: Ø 70 mm Thrust: 178 mm Installation height: 240 mm (top stroke) Stroke: 1-100 mm Lhjdpfx Asvxvtxenxjl Weight: approx. 480 kg Drive power: 2.2 kW Other features • Hydraulically driven • Continuously adjustable stroke rate • With protective screen for inserting work with secure tools • With height-adjustable mounting bracket (feed optional)

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Lhsdpfow Dgi Tjx Anxol Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 66 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, total height: 1,600 mm, total length: 2,750 mm, total width: 1,340 mm, overall weight: 1,750 kg, spindle nose: A2-6, Equipment: documentation/manual, Spindle bore: 66 mm Spindle nose: A2-6 Spindle speed: 30~2500 rpm SIEMENS 808D Advanced control system SIEMENS servo drives Frequency-controlled main spindle motor (5.5 kW) Hydraulic chuck, 200 mm, with hydraulic unit Hydraulic tailstock Automatic turret with 8 stations (20x20 mm) SIEMENS electrical components MK4 live center Lhodpfszzcyajx Anxol Cooling system Automatic lubrication system Electronic handwheel LED work light Machine body made of cast iron Door switch 3-color warning light

Condition: used, Year of construction: 1999, operating hours: 23,765 h, Type of fuel: Electric Colour: Grey Empty weight: 4.900 kg Dimensions (LxBxH): 240 x 120 x 243 cm Lifting capacity: 3.000 kg Lift height: 380 cm Fork dimensions: 1.340 x 680 mm - Year: 1999 - Documentation available: Yes - CE certificate present: No - Serial number: 516025008830 - Operating hours: 23765 - Lifting capacity: 3000kg - Lifting height: 3800mm - Overhead clearance: 2430mm - Free lift: 0mm - Fork length: 1340mm - Maximum fork width: 680mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Hydraulic extendable forks - Options: Work lights - Mast: Duplex - Drive: Electric - Battery information: Lodpfx Anjydlnyjxehl - └ Brand/Type: Hoppecke - └ Battery year of construction: 2016 - └ Capacity: 700Ah - └ Battery voltage: 80V - Transport dimensions: 2400mm x 1200mm x 2430mm (l x w x h) - Transport weight [kg]: 4900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, machine/vehicle number: 3518100194, Year of construction: 1999, load capacity: 3,000 kg, fuel type: diesel, mast type: duplex, drive type: Diesel, Diesel forklift Chassis number: 3518100194 Mast type: Duplex Condition: Limited operational readiness Technical condition: normal Front tire type: Solid rubber Front tire condition: 40 - 60% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: Linde H30D / Deutz engine, no.: R0803, year of manufacture: 1999, operating hours: not specified, lifting capacity: 3,000 kg, lifting height: not specified, overall height: 2300 mm, mast: standard, drive: diesel, engine: Deutz diesel engine, equipment: side shift, 3rd hydraulic valve, front and rear work lights, windscreen, full cabin and windscreen wiper. Condition / known defects: The Deutz engine starts. The machine drives, but sometimes shuts off again after travelling only a few metres. The tilt cylinder is defective. Poor visual condition. Sold in its current condition. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Lhjdpfx Anezx Hxhjxol 3rd hydraulic valve, rear work light, front work light, windscreen, full cabin, windscreen wiper.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Lhodpfx Anez A Ap Isxol Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, operating pressure: 160 bar, total length: 1,700 mm, total height: 1,140 mm, total width: 760 mm, tank capacity: 400 l, input voltage: 400 V, pump capacity: 90 l/min, rotational speed (max.): 1,450 rpm, power: 30 kW (40.79 HP), empty load weight: 800 kg, input frequency: 50 Hz, A very well-maintained hydraulic power unit. It was last used to supply several test benches with hydraulic pressure for various clamping devices. Also available is an additional, unused MOOG D954-0059 pump. !! The 2nd unused pump is NOT included in the listed sales price !! Power Unit Manufacturer: Wagener Hydraulik Year of manufacture: 1990 Pump Manufacturer: MOOG Model: D954-0059 /C' Year of manufacture (Pump): 02 . 2009 Nominal pressure: 280 bar Lhjdpfx Anjt Hwfhexsl Flow rate: 90 liters/min (63 cm³ / RPM) Filter unit: Hydac with pre-pump Level monitoring Accumulator: Hydac with digital pressure transmitter Year of manufacture: 2013 Capacity: 20 liters Electric motor: Siemens 1LA6 207-4AA70 200L Drive power: 30 kW Speed: 1465 rpm Voltage: 380 / 660 Volts

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min Lhjdpfxjx I I Uxe Anxel - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: good (used), Year of construction: 2009, Technical data: - Operation via hand-held wired remote control - Load capacity: 2000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 205 mm - Maximum lift table height: 990 mm - Lift stroke: 785 mm - Lifting speed with / without load: 25 / 15 mm/s Lhedey Nzcrspfx Anxol - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Required floor space: approx. W 2580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: used, Bosch Rexroth 5.5 kW industrial hydraulic power unit with valve manifold, Used Machine POWER UNIT / HYDRAULIC TANK (BOSCH REXROTH): Manufacturer / Brand: Bosch Rexroth Kft. Work Order No.: 3285684/10 Type: 97.02.883 RRG Year of Manufacture / Refurbishment: 2011 / 2016 Tank Capacity: 100 litres (dm³) Recommended Oil Grade: HV 46 Design: Robust steel hydraulic tank with oil level indicator, inspection/cleaning opening and chassis with drip tray. DRIVE MOTOR: Manufacturer / Brand: BROOK HANSEN (Made in UK) Type: WU-DA132SJ-D Power: 5.5 kW Protection Rating: IP55 Voltage / Current: 380–415 V Δ / 660–720 V Y (11.5–11.0 A) Speed: 1740 rpm (60 Hz) / approx. 1450 rpm (50 Hz) COMPONENTS AND EQUIPMENT: Multiple-section Rexroth hydraulic valve manifold Integrated hydraulic accumulator (gas accumulator / pressure buffer) Pressure gauge and fine filtration unit Lhedpfezy I Iysx Anxol OVERALL DIMENSIONS: Width: 730 mm Depth: 595 mm Height: 1310 mm

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment - Number of hydraulic clamping cylinders 15 pcs - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm Lhedpfxszruf No Anxel - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: good (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 85 cm³, total length: 4,200 mm, total width: 2,100 mm, total height: 3,600 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ARBURG Allrounder 1200 T 1000-170 Stock No.: 503459 Manufacturer: ARBURG Type: Allrounder 1200 T 1000-170 Control System: Selogica Year of Manufacture: 2013 Operating Hours: 22420 h Technical Data - Clamping Unit Clamping Force: 1000 kN Minimum Mold Height: 400 mm Maximum Mold Distance: 700 mm Opening Stroke: 300 mm Platen Size (Diameter): 1200 mm Ejector Stroke: 175 mm Ejector Force: 25 kN Centering of Moving Platen (Diameter): 125 mm Centering of Fixed Platen (Diameter): 125 mm Mold Weight: 1150 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 85 cc Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 120 mm Number of Heating Zones: 4 Nozzle Distance: 210 mm Dimensions & Weight Machine Dimensions (L x W x H): 4.2 m x 2.1 m x 3.60 m Total Weight: 7300 kg Lhodsz A Dmzopfx Anxsl Equipment 3x Temperature Control Units for Hot Runner Screen Text: German CEE Socket 16A Compact-Flash Drive Rotary Table Freely programmable inputs (2) and outputs (2) Machine with Material Hopper Machine with Water Manifold Needle Gate Nozzle, Hydraulically Actuated EUROMAP 67 Handling Interface Servo-Controlled Hydraulic Pumps Wear-Resistant Plasticizing Unit

Condition: used, Year of construction: 1995, operating hours: 9,066 h, power: 70 kW (95.17 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, parking heater, * Enclosed cab * Manual transmission with 6 forward gears * Air conditioning Lodpfx Anozrrhzjxohl * Radio * Switchable all-wheel drive * 2 hydraulic circuits at the rear (infinitely adjustable) * Rear PTO shaft * Rear three-point linkage * Rear drawbar (height adjustable) * Front weight * Preparation for front three-point linkage * Front hydraulics (2x 1-circuit & 1x 2-circuit) ----* Front tire dimension: 420/70R24 * Rear tire dimension: 480/70R38 * Fuel tank: 100 liters * Technically permissible total weight: 7500 kg * Unladen weight: 4400 kg * Overall length: 4030 mm ----Vehicle number: 12365----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, brokerage of financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. Lhedeztckispfx Anxjl The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2001, DMG / MAHO DMC 80 U – CNC Universal Machining Center Manufacturer: MAHO / DMG Model: DMC 80 U Machine Type: CNC Universal Machining Center Year of Construction: 2001 Machine/Factory Number: 71.408.395 Control System: MillPlus IT Operating Hours: approx. 90,896 h Spindle Operating Time: approx. 44,717 h Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Draw-in Force Target: 22 kN Measured Tool Draw-in Force: 17 kN Spindle/Geometric Runout at L = 0 mm: 0.005 mm Spindle/Geometric Runout at L = 200 mm: 0.005 mm Tool Management Tool Magazine: 120 tool positions Automatic Tool Changer Tool gripper disassembled and cleaned as part of the last documented maintenance Pallet Automation 6 pallet positions Automated pallet handling system available Rotary/NC table available B and C axes available, according to the electrical maintenance report Axes / Drives Documented in the maintenance report of 2026 NC rotary table and axes Pallet changer / pallet handling Tool magazine / tool changing system Coolant and filter system Coolant system Chip conveyor Interlit compact filter Spindle oil cooler Smoke/mist extraction Ringler extractor During the documented maintenance, the following were carried out, among others: Coolant tank steamed and cleaned Chip conveyor cleaned Extraction system cleaned Tool gripper disassembled and cleaned Pressure accumulator checked and refilled with nitrogen to 80 bar Extractor cleaned Machine geometry checked Hydraulics / Lubrication Spindle cooling unit Hydraulic unit NC rotary table Oil changed during maintenance Central lubrication Lhsdpfsz D Stfex Anxol Performed by DECKEL MAHO Pfronten. The following were checked or serviced, among others: Electrical cables Control cabinet Hydraulic lines and hoses Compressed air system Check valves Axes Lighting Filters Machine function Emergency stop system Door locks Two-hand operation Machine geometry Electrical safety Check valves were renewed according to the maintenance report Electrical check very good according to DIN EN 60204 Insulation measurements – excerpt All documented measurement points were evaluated as OK. Main spindle motor: 192 MΩ X-axis: 255 MΩ Y-axis: 103 MΩ Z-axis: 427 MΩ B-axis: 279 MΩ C-axis: 108 MΩ Tool magazine: 267 MΩ Pallet changer drive: 113 MΩ Pallet changer linear drive: 90 MΩ Vertical stroke pallet changer: 1.12 GΩ Smoke extraction: 97 MΩ Chip conveyor: 1.42 GΩ Tool gripper: 1.66 GΩ Hydraulics: 2.21 GΩ Machine lamp: 447 MΩ Lubrication: 3.26 GΩ Protective conductor test Specification: < 0.3 Ω Measured values: Protective door machine: 0.16 Ω Protective door pallet changer: 0.26 Ω Control panel tool changer: 0.13 Ω Coolant system: 0.11 Ω Spindle cooler: 0.21 Ω Control panel work area: 0.03 Ω Spindle: 0.22 Ω Ringler extractor: 0.21 Ω All documented measurement points are within the specified target range. Equipment CNC control system MillPlus IT Universal machining B-axis C-axis / NC rotary table 12,000 rpm spindle 120-position tool magazine 6-position pallet system Automatic tool changer Automatic pallet handling Coolant system Interlit compact filter system Chip conveyor Spindle oil cooler Smoke/mist extraction Ringler extractor Hydraulic unit Central lubrication Comprehensive safety equipment Geometry test, runout value of 0.005 mm at a measuring length of 200 mm Tool draw-in force 17 kN, target value 22 kN

Year of construction: 1996, condition: good (used), machine/vehicle number: 9605075, Offer 22537 Technical data: - max. working width 4040 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.5 - 3° - Cutting gap adjustment, hydraulic - Number of hydraulic clamping cylinders 22 pcs - Motorized backstop with positioning control 10 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 strokes/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - includes: Lhjdpfxjimq A Io Anxsl - Electronic foot switch - Cutting line illumination - Sheet metal lifting system, pneumatically assisted