Used Hydraulic Drive Variator for sale (33,745)

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm Fgodpexaat Usfx Aggeg adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Condition: used, Year of construction: 1999, sheet width 3060 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. Fodpfsxaci Eex Aggjgg cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display Fsdpfx Agjxabnajgjgg - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Fgjdpfxsxaa Dgj Aggsg Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar Fjdpfx Agoxaaghogogg oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec Fgsdpfx Agsw U U Svsgog return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° Fgsdpfxoznngxj Aggeg back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right Fgodjxaa Ixepfx Aggeg

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount Fsdpexaakgefx Aggogg - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table Fgodpozkvx Usfx Aggsg - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: used, Year of construction: 1987, sheet width - max. 3035 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO total power requirement 8.5 kW weight of the machine ca. 4400 kg range L-W-H 3416 x 2250 x 1760 mm Equipment: - robust NC electro-hydraulic guillotine shears - NC electro-motorized backgauge * with ELGO control unit "TYPE 85" - Manual cutting gap adjustment - front support table incl. recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable front support arms - 1x freely movable foot switch - front finger guard Fsdoyyc A Uepfx Aggjgg - Rear metal slide - EMERGENCY OFF button at the front - Operating instructions (PDF)

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm Fgodpjy Raimjfx Aggsg distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm Fgjdpfjx Ni D Rex Aggjg thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. Fgsdpfjycxgmsx Aggsg - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 Fgjdpfx Aoxaabfeggjg with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm Fsdpfxjxabcwe Aggsgg column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: Fodpexabvqofx Aggogg - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Year of construction: 2000, sheet width 3100 mm Fodpfxszycpxj Aggsgg plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Fjdpei D Naaofx Aggogg

Condition: ready for operation (used), Indramat KDA 1.1-100-300-W1-220 AC. Main spindle drive, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Fgedpfxji Ebgyj Aggog

Condition: ready for operation (used), Barmag EAV133-0-160 BELTRO-DRIVE, serial number 9008-29845, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgedpsi D T E Njfx Aggsg

Condition: ready for operation (used), Indramat CDM 1.4-A AC main spindle drive, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Fgjdpfxji Ebbie Aggjg

Condition: ready for operation (used), Danfoss VLT 3032 Variable Speed Drive, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fgedji D Unuopfx Aggjg

Condition: ready for operation (used), Lenze 9225_E.3A.30 servo drive, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Fsdpei Ebxxjfx Aggegg

Condition: ready for operation (used), Philips 4022 226 3632 LM/RM drive module card, in used condition, with normal signs of wear, 100% functional. Condition and serial number as shown in the photo. Scope of delivery as per photos. Fsdpfoi Echgjx Aggogg