Used Index C 65 for sale (59,528)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 79,500 h, functionality: fully functional, machine/vehicle number: 11710000713, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 600 kg, The machine spindle was replaced according to DMG in 2022. A measurement protocol for the machine is included! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 700 mm Travel Z-axis: 700 mm Spindle speed: 18,000 rpm Spindle torque: 110 / 84 Nm Spindle power: 34 / 28 kW Tool holder: SK 40 Tool changer: 180 positions Pallet size: 500 x 500 mm Max. workpiece weight: 600 kg Rapid traverse: 60 m/min MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Total connected load: 68 kVA Dimensions & Weight Space requirements: 9.5 x 7.5 x 3.4 m Machine weight: 10.5 t Operating Hours Spindle hours: 79,500 h Power-on hours: 112,000 h EQUIPMENT NC rotary table RS 10 pallet rotary storage, total of 12 pallet stations Csdpfeyvp Dksx Ac Nerb iTNC operator panel for the loading station ICS 40 bar (production package) Through-spindle air blast BA 4 2/4 hydraulic clamping for worktable and set-up station BLUM laser (prepared) Oil mist separator TS 649 probe Mechanical tool breakage detection SDS (Spindle Diagnostic System) Rinse gun Electronic handwheel Chip conveyor

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Crodpfx Acjd Dhw Ne Nob

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN Crsdpfshy Nnbex Ac Njb PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm smallest bending radius: 32 mm Csdpfjykl Rzex Ac Njrb motor: 30 kW

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: AT1379, SPINNER TC600 with travel range X=275mm Z=700mm in 45-degree slant bed design with hardened and ground box ways Configured as SINGLE-SPINDLE LATHE with turret WITH driven tools WITH Y-axis INDEXING TURRET – WITH powered tool stations all tool stations can be driven, servo turret Turret indexing speed adjustable Turret tool interface system BMT45 Number of turret stations: 16 SPINDLE 1 version up to 4,000 rpm – 65mm As integrated motor spindle, water-cooled with hydraulic hollow clamping cylinder, 65mm bar capacity, speed range 0–4,000 rpm, Pmax 34 kW / 325 Nm Crjdpjyk Al Aofx Ac Nob SELF-CENTERING POWER CHUCK by SMW-Autoblok D=250mm, 3-jaw, Model BHD Set of soft jaws, set of hardened top jaws AIR BLAST NOZZLE Spindle 1 CNC CLAMPING FORCE ADJUSTMENT on spindle 1 SPINDLE FLUSHING on spindle 1 FOOT SWITCH CNC TAILSTOCK with integrated bearing movable as CNC axis along the main spindle axis. Programmable tailstock force. FOOT SWITCH for moving the tailstock quill during loading operations DIRECT MEASURING SYSTEM on X-axis Control SIEMENS 840DE with the following standard features: – SPINNER – SPIOS 24" touch control panel for I4.0 applications – Height-adjustable, rotatable and tiltable control panel for optimal ergonomics – incl. engraving cycles – 24" LCD flat color display with multi-touch functionality – 2 GB user memory – 15 zero offset settings – 1 free USB interface – Standard Ethernet interface SPINNER MULTI-CONTROL-WHEEL on control panel all key setup functions integrated in one control element MULTIFUNCTION HANDHELD OPERATING DEVICE with integrated display SHOPTURN, 4-axis machining, 3D SIMULATION, REMAINING MATERIAL DETECTION, DXF reader Energy-saving function including automatic machine shutdown CHIP CONVEYOR as hinge belt conveyor discharging to the right, incl. integrated coolant tank and conveyor pump HIGH-PRESSURE PUMP 15 bar CARTRIDGE FINE FILTER PROBE for in-process tool measurement AUTOMATIC DOOR for work area door Universal robot interface UNIROB STANDARD DOCUMENTATION IN GERMAN consisting of machine manual and CNC manuals, supplied in digital form on the control. STANDARD PAINTWORK two-tone in light grey RAL7035 and blue grey RAL5008 Electrical design to EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-wire) Toolholder package Notes: The price includes warranty services only within Germany. For new and demo machines, the pictures are not necessarily those of the specific machine but of similar models. Displayed accessories such as clamping equipment or toolholders are only included as far as listed in the technical description. Please ask for a detailed factory quotation. Visit our factory near Munich or one of our showrooms. We may also have other offers for comparable machines. Intermediate sale expressly reserved.

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700 Cjded Ab H Nepfx Ac Nerb         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00034717-00-0010-01, No reserve price – guaranteed sale to the highest bidder! The original purchase price of the system was 93,000 EUR! Washing system with the following configuration: - Recycled water system (QU00370) - Articulated arm assembly (QU01210), clearance height 2,250 mm - SENSOFIL + (QU01410), clearance height 2,250 mm - Roof roller splash guard (QU00142) - Wheel washing unit with brush & linear technology (QU00151) - Side high-pressure system (QU00152), 2 RD, 1 overflow: 20 l/min, 85 bar - Side high-pressure system (QU00169), 8 OD, 1 overflow: 40 l/min, 50 bar - Active foam applicator (QU01500) - Special wax application unit (QU01530) - Emergency stop device front left (QU00320) - Emergency stop device front right (QU00330) - Emergency stop device rear left (QU00340) - Emergency stop device rear right (QU00350) - Positioning device, LED, fixed, left (QU00388) - Positioning device, LED, fixed, right (QU00389) - Fresh water system separation, pipe separator (EZ00000) - Energy supply chain (EZ00020) - Operating terminal, VARIO-L, wall-mounted (EZ02500) - Wheel guidance rails (EZ00700) - Signs DIN A3 - Documentation, PWA, standard, DE - VDA conformity certificate, PWA, DE - Initial chemical set, PWA Electrical data: Rated voltage: 400 V Mains connection: 3/N/PE Frequency: 50 Hz Credoyx U D Uspfx Ac Nsb Power consumption: 19.0 kW Rated current: 38 A

Condition: used, TECHNICAL DETAILS - Bar diameter : 8-100 [mm] Cjdpfx Aceyzi U Hj Nsrb - Bar length : 1550 [mm] - Adjustable bar feed speed : 80 [m/min]

Condition: good (used), Year of construction: 1999, clamping force: 650 kN, Manufacturer: KraussMaffei Kunststofftechnik Munich Model: KM 65-160 C2 Clamping force: 650 kN Machine No.: 641070 Order number: 643883/1 Year of manufacture: 1999 International size designation: 160 C2 / 65 Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Crsdpfjytik Rex Ac Neb Main fuse: 160 A Max. motor current: 30 A Machine weight: 3,200 kg Location: Freiburg

Condition: used, mileage: 70,275 km, power: 390 kW (530.25 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 8x8, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 5,950 mm, loading space width: 2,470 mm, loading space height: 1,460 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Remote central locking - Pintle hook - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Sun visor - Auxiliary heater - Toolbox = Notes = Mercedes-Benz Arocs 3253 8x8 Full spring suspension. 2 sets of tyres. Road: 385/65R22.5 315/80R22.5 Off-road: 14.00R20 Copma 650.6 Jib with 6 extensions. Winch. Front outriggers. Scanreco radio remote control. Personnel basket. Lifting capacities: 2.00 m - 27,520 kg 4.30 m - 12,800 kg 5.95 m - 9,070 kg 7.70 m - 6,840 kg 9.55 m - 5,380 kg 11.40 m - 4,420 kg 13.50 m - 3,680 kg 15.60 m - 3,160 kg 2 x manual extension 18.71 m - 1,720 kg 20.11 m - 1,520 kg 21.75 m - 1,240 kg 23.46 m - 1,000 kg 25.19 m - 870 kg 26.96 m - 800 kg 28.76 m - 720 kg 80 cm hydraulic extension on loading platform. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle 1: Steering Front axle 2: Steering Weights Empty weight: 24,855 kg Payload: 12,145 kg Gross vehicle weight: 37,000 kg Functionality Crane: Copma Financial Information Price: On request Identification Type number: AROCS 3253 8x8 / 65 t/m CRANE + Cedpsynlnhofx Ac Njrb = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We strive to provide accurate information, however, no rights can be derived from the posted texts.

Condition: used, mileage: 142,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 06/2018, emission class: euro6, color: white, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, parking heater, * Our internal ref.: 1093 * Well-maintained vehicle * (Two identical vehicles available) * Sprinter 516 * Original EVOBUS bodywork * City 65 * RETARDER. TELMA Credpfx Acsyxi Ris Neb * LOW GENUINE MILEAGE – VEHICLE ONE OWNER * LED matrix display: front / side / side / rear with control unit * Bus lifting system * Auxiliary heater * Stationary heating * Driver's cab air conditioning * Passenger compartment air conditioning * 2 fold-down seats * Double glazing * Convector heater * Manual folding ramp * Pre-installation for interior monitor (the monitor and cash register/printer shown will be removed prior to sale) * Clean vehicle * Vehicle in operation – mileage and condition may vary. * ALL INFORMATION WITHOUT GUARANTEE * INTERIM SALE RESERVED * PLEASE REFER TO OUR TERMS AND CONDITIONS. These are part of the sale!

Condition: used, mileage: 253,000 km, power: 265 kW (360.30 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 14,230 kg, maximum load weight: 11,770 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, loading space length: 4,700 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, trailer coupling, Vehicle location: Bovenden, aluminum superstructure, with cab, suspension seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, sun visor, 16-speed switch, ABS (anti-lock braking system), raised exhaust, work lights, leaf suspension, trailer coupling with air, light, and hydraulic connections, lashing rails, rear-mounted crane, demountable, emergency stop, grab control, 2-point hydraulic outrigger, radio remote control, four hydraulic extensions, yellow environmental badge Wheelbase: 3200 mm Body: Aluminum three-way tipper, aluminum drop sides, swinging and folding, with spring relief, Palfinger PK 16502 C, demountable, 12.4 m - 890 kg, remote control, crane 5100 operating hours. Load chart: max lifting capacity 5,580 kg, 4.30 m – 3,310 kg, 5.90 m – 2,270 kg, 7.90 m – 1,530 kg, 10.20 m – 1,220 kg, 12.40 m – 990 kg, oil cooler, grab available at an additional price of €2,500.00. The vehicle is also available without crane for €29,900.00! Crjdov Inmpjpfx Ac Neb ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm Crsdpfxoym A E Io Ac Neb MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Condition: ready for operation (used), Year of construction: 1995, Vertical Machining Center YCM - VMC 65A / Fanuc OM - CE mark - Control system Fanuc OM - Ready for operation / Functional video available Cjdpfx Acjyup N Aj Nerb - Travels X / Y / Z 650x410x615 mm - Table dimensions 840x420 mm - Speed range up to 6000 rpm - Tool holder BT 40 - 2x Hydraulic vises - Tool magazine / Side-mounted 16-position changer - Electronic handwheel - Coolant system - Motor power 7.5 kW - Machine leveling feet Dimensions (LxWxH): 3.5x2.4x2.8 meters / Weight 4500 kg Errors and data entry mistakes excepted.

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBNC-65 Technical Specifications Max. Tube Diameter (mild steel): 63 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Min. Bending Radius (mm): 45 Tube Length (mm): 3500 Bending Tolerance (mm): ± 0.25 mm Bending Motor Power (kW): 7.5 Hydraulic Motor Power (kW): 4 Oil Tank Capacity (L): 50 Machine Width (mm): 1450 Machine Length (mm): 4250 Machine Height (mm): 1200 Machine Weight (kg): 1600 Features • 4-way adjustable gauge • Chain bending system • Gear motor • Touchscreen control panel • Foot pedal operation • Hydraulic mandrel movement Crsdjxt Rdwjpfx Ac Nsb • Hydraulic damping function • Hydraulic compression function • Hydraulic pusher • Four cylinders • 7" touch color display • 15 sequential twist positions • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Codsxvzt Uspfx Ac Nerb Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Cedpfxsygnxao Ac Norb

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm Codpfx Aet I Tpljc Nerb The machine is in good condition and fully functional Technical data Commissioning: 2001 Control: Heidenhain TNC 430 i Table size: 850x600 mm Tool holder: SK 40 Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, mileage: 579,278 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 11/2017, emission class: euro6, color: white, number of seats: 15, Equipment: ABS, air conditioning, * Our internal no.: 1090 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x AIR CONDITIONING * First registration 11/2017 - EURO 6 * New engine in 05/2024 at 534,162 km (current engine: 45,116 km), repair invoice amounting to approx. 15,000.00 € is available * Complete overhaul of automatic transmission including new torque converter in 07/2024 * Vehicle has dent/damage * Auxiliary heater / stationary heating * Driver's seat heating * LAWO destination display with SicmaControl unit Csdpswnlhvofx Ac Nerb * TFT monitor preparation * Convector heating * Seats with 3-point seat belts * 11 seats * 12 standing places including 4 emergency folding seats or 1 wheelchair space & 2 emergency folding seats * Mechanical fold-out ramp, ... * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: excellent (used), Disc valve, flap valve, ball valve, butterfly valve, globe valve, slide valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN65 PN6 Crsdpod I I Hpefx Ac Neb -Quantity: 2x valve available -Price per piece -Dimension: 170/160/H330 mm / 170/160/H340 mm -Weight: 7.6 kg/7.7 kg

Year of construction: 2002, condition: used, fuel type: electric, Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece Cjdpfx Aoi Dpzdoc Nsrb -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, elastic claw coupling -Type: 65 CH-NR.145147 N -Bore hub: Ø 75 mm / Ø 60 mm see photo technical drawing -Number: 2x coupling available -Price per piece -Dimensions: Ø 135 x 210 mm -Weight: 13.9 kg Cedpfx Ast Trzdoc Nsrb

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg Csdjf Nrp Tepfx Ac Nsrb

Condition: used, tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case Csdpfxsr H Nlzo Ac Norb -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8" -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg

Condition: good (used), Year of construction: 2000, Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Manufacturer: Powerthane / Jungheinrich, support wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm Cedpfx Acsi Aqaqo Nerb -Quantity: 1x support roller available -Dimensions: 240/160/H280 mm -Weight: 13 kg