Used Jenoptik Jenoptik Wave C8000 for sale (190)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Hedpfx Ajzfi A Ajm Tjr Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact Hedpfxoxrb Tgj Am Tjr - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Year of construction: 2007, Data sheet of retrofit POS. GE 10.10 Roller conveyors, FB = 550 mm Gebhardt, 7,000 mm = FL Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 7,000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Hodpjk Aa A Ssfx Am Tor Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2007, Data sheet of retrofit POS. GE 13.25 Roller conveyors, FB = 550 mm Gebhardt, FL = 2.000 mm Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 2.000 mm Hedpfx Ask Aa Ddom Tor Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, This listing is for a Heidolph Polymax 1040 Platform Shaker The unit is in full working condition and is ready for immediate release. The Heidolph Polymax 1040 Platform Shaker is expertly designed to deliver consistent and reliable shaking for a wide range of applications in laboratory settings. From gentle mixing to vigorous shaking, this platform shaker provides the perfect solution for your sample preparation needs. Key Features: - Customizable Speed Settings:Adjust the shaking speed from 2 to 50 RPM, allowing for precise control based on your specific requirements. - Temperature-Controlled Integration:The 1000 series device can be integrated into the incubation system, enabling temperature-controlled applications with the Polymax 1040 for optimal sample conditions. Hjdpoxxx S Hefx Am Ter - Large Platform:The spacious platform (40 x 40 cm) accommodates a variety of flask sizes and sample containers, making it versatile for different lab protocols. - Robust Design:Built with a sturdy frame and durable materials, ensuring long-lasting performance even in demanding environments. - Impressive Load Capacity:Designed to handle a load weight of up to 5 kg, accommodating all required samples on this platform wave shaker. - User-Friendly Interface:Intuitive digital display for easy monitoring of speed and time settings, enhancing convenience during operation. - Continuous or Timed Operation:Operate the device continuously or set a timer for up to 120 minutes, providing flexibility for various laboratory processes. - Safety First:Equipped with an overload protection feature that automatically shuts off the shaker if it becomes overloaded, preventing damage to both the shaker and your samples. - Applications:Cell Culture: Ideal for cultivating cells in flasks or plates with consistent agitation. - Chemical Reactions: Perfect for mixing reagents or solutions thoroughly to ensure uniform results. - Sample Preparation: Efficiently shake samples for extraction processes or homogenization.

Condition: used, This listing is for the Schneider Electric APC Smart RT2000 UPS The unit is in full working condition and is ready for immediate release Hsdsxv D Hqepfx Am Tsr The APC Smart-UPS RT 2000VA is a rack mountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 The unit is in full working condition and is ready for immediate release Hsdpjxv Dywjfx Am Tor The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: used, This listing is for 1 of 5 Spectroline Es-160/FBE UV Lamp. The unit is in full working condition and is ready for immediate release. The Spectroline Es-160/FBE UV Lamp is a handheld, long-wave UV lamp designed for various applications, including leak detection, curing, and inspection. Here are some key features and specifications: Tube: 6W, long-wave UV-A (365nm) Hsdpfxsxxzbks Am Tjr Voltage: 120V/60Hz Dimensions: 63.5 mm (height), 3-1/4"W x 10"L x 4-1/4"H Handle: Detachable

Condition: used, This listing is for the APC Back-Ups CS 500 UPS The unit is in full working condition and is ready for immediate use Key Specs & Performance Capacity: 500 VA / 300 W – suitable for basic PC setups, modems, routers, or low-power peripherals Runtime: ~2.4 minutes at full 300 W load ~13.8 minutes at half load (150 W) Topology: Off-line (standby) UPS with ~6 ms transfer time Waveform Output: Stepped approximation to a sine wave Connections & Interfaces Input Connection Type: IEC 60320 C14 Output Connection Types: 3 × IEC 60320 C13 (Battery Backup + Surge Protection) 1 × IEC 60320 C13 (Surge Protection Only) 2 × IEC jumper surge-protected outlets Number of Cables: 2 included Data-Line Protection: RJ-11 phone/fax/DSL line Communication Ports: USB + optional RS-232 Management Software: Supports APC PowerChute Personal Edition Battery & Power Battery Type: Sealed lead-acid maintenance-free (VRLA) Battery Cartridge: APC RBC2 Battery Recharge Time: ~8 hours User-replaceable: Yes, hot-swappable Battery Life Expectancy: 3–6 years Cold-Start Capable: Yes Self-Test: Automatic periodic testing Surge & Safety Features Surge Energy Rating: 300–310 J Noise Filtering: Full-time EMI/RFI filtering Audible Alarms: Yes – for battery use, overload, low battery LED Indicators: Status display panel Certifications: CE, VDE, GOST, C-Tick Resettable Circuit Breaker: Included Physical Characteristics Height: 16.5 cm Width: 9.1 cm Hedpfoxv Duzox Am Tsr Depth: 28.4 cm Net Weight: 6.03 kg Color: Beige/Light grey (typical for CS series) Noise Level: Approx. 40–45 dBA

Condition: used, This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Hsdpfx Amsxxy Uij Tsr Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

Condition: used, mileage: 69,026 km, power: 96 kW (130.52 HP), first registration: 07/2017, overall weight: 3,500 kg, wheelbase: 3,682 mm, gearing type: mechanical, emission class: euro6, Equipment: ABS, airbag, cruise control, electric window regulation, onboard computer, Features - Radio - Power steering - Electric windows - Electric immobilizer - Central locking with remote control - On-board computer - Rear view camera - Anti-lock braking system (ABS) - Traction control system (ASR) - Pneumatically sprung driver's seat from ISRI - Ladder holder Structure France Elevateur 142 TPFc aerial work platform - Working height: 13.8m - Lateral reach: 7.3m - Platform load capacity up to 265kg - Remote control - Engine start/stop function - Emergency pump - Hour meter - 2 x A-outriggers - Work platform (L/W/H) 1300 x 700 x 1190 mm - Swivel angle 400° - Platform arm rotation angle 140° - One-hand joystick proportional control of hydraulic movements in the work platform - 2 x 60° platform rotation, electric - Acoustic tilt sensor - Flashing lights - 230V connection in the platform Hedpjy Sydaofx Am Tjr - Sine wave inverter 2500VA - Electro-hydraulic control - Plastic work platform (1000 V insulation) The Renault Master with France Elévateur 142 TPFc is the ideal solution for companies that perform work at height. The France Elévateur aerial work platform, model 142 TPFc, offers a working height of up to 14 meters as well as a lateral reach of up to 7 meters, thus enabling safe and efficient access for maintenance and repair work. Thanks to the electric and hydraulic control as well as the integrated power converter, the vehicle can be used in a wide range of applications. The shortened superstructure ensures high maneuverability – ideal for use in cities, on construction sites and in narrow streets. Perfectly suited for telecommunications companies, municipal utilities, electricians and painting companies. Robust, reliable and compact – the Renault Master with aerial work platform combines mobility and functionality in an ideal way! All functions of the aerial work platform are fully functional and have been checked in our workshop. The vehicle is ready for registration. German vehicle documents, TÜV (technical inspection) and UVV (accident prevention) inspection are included in the price. Additional equipment such as a trailer hitch, lighting, shelving systems and other options are available on request. Available immediately from stock in Langenfeld! ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is done exclusively with original photos, which were taken directly in our company – this guarantees full transparency regarding the actual condition of the vehicle. Before sale, our vehicles undergo a comprehensive refurbishment in our own workshop – including mechanics, bodywork and paintwork. They are thus optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also as part of a remote inspection. Our service offer for you: Delivery of your vehicle to the location of your choice Complete handling of all export formalities, including export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment on request

Condition: used, Year of construction: 2001, Technical details: Hedpfottxg Iox Am Ter grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm Hsdpfx Amjyhzhbo Tjr

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: Hsdpfx Ajyhzhnjm Tor - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Hodpfjyhzhuox Am Tsr Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Year of construction: 2026, condition: new, Robust Steel Construction – Designed for Continuous Operation The basic structure consists of a stable construction steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality RAL0208 powder coating. Modular Design: Our conveyor belt frames are available as transportable sections. This makes the system: • Easy to transport and assemble • Extendable or shortenable at any time • Ideal for future modifications or system adaptations Hsdpfx Aeyhznnom Ter Conveyor Technology & Carrying Rollers The carrying roller construction in the lower run is designed for smooth and reliable operation: • Shaft diameter: 60/15 mm • Roller station spacing: approx. 500 mm (customizable) • Closer roller spacing in the infeed area available on request for higher load capacity Drive & Rollers The drive drum and return drum are made of S235 steel, welded and precisely machined: • Ø 220 × 700 mm, crowned and finish-turned • Shaft secured with tension bearings • Bearing positions with robust UCF flange bearings, including lubrication nipples Drive Unit: • Hydromec worm gear motor, 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive supplied ready for wiring to motor terminal box (commissioning must be carried out by a qualified electrician) • Motor mounted on the right, pull configuration in the conveying direction Conveyor Belt A durable, industrial-grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Profile-free splice area • Endless hot vulcanized Custom Options & Accessories (depending on requirements) The modular design allows all components to be precisely adapted to your process, such as: ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and increased conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) ✅ Feed/infeed hoppers (for clean loading of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt specifications ✅ Adjustment of roller spacing & carrying roller geometry ✅ Special coatings / custom designs

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Hsdoyhzhzjpfx Am Tsr Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 4500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Hsdpfxjhh Ay So Am Tsr Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2018, condition: excellent (used), Aluminum riser conveyor incl. Substructure Dim: 4000 x 460 x 1000 / 1700mm Construction: height adjustable Conveyor belt width 400mm PVC conveyor belt incl. Driver and wave edge (NEW) Construction for suspension of the overband magnetic separator. Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Hodpsd Dza Ajfx Am Tjr Protection class: IP-55 * incl. new bearings, new conveyor belt

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Hodpfeyut Dksx Am Tsr Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: Hedpfx Ajytd Scom Tjr 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminum flat belt conveyor without substructure Belt length: 6000mm Drive roller: knurled Idler roller: crowned, over-rotated PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue, FDA compliant according to EU10/2011 Belt width 500mm, outside Wave edge welded on both sides, 40mm high T-30 studs (61 pieces) - 200mm pitch * antistatic due to threads in the fabric of the running side Endlessly welded with a stepped finger joint Food-grade certificate included Hjdpjg D T N Hofx Am Tjr V2A stainless steel backing plate, full surface Drive: Motor approx. 1.1kW - horizontally mounted * optionally controllable with a frequency converter Connection 220/

Year of construction: 2021, condition: new, Aluminum angled conveyor belt including mobile substructure horizontal area 1500mm (adjustable) Rising range 2500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Polyamide swivel castors with locking brakes Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Hsdpfohh A Uqox Am Ter Wave edge: 40x35mm (customizable) T-20 studs - 400mm pitch (customizable) 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2023, condition: new, Due to overproduction, 9 units are available. Dimensions: approx. 3000 x 300 x 105 mm Aluminum construction: Conveyor belt width without wave edge Hedpfxsff Hgaj Am Tsr Smooth PVC conveyor belt Green conveyor belt, 2-layer, particularly resistant to transverse forces, endlessly welded with a stepped joint * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.3 m/sec. * speed controllable with a frequency inverter Connection 220/400V, 50Hz, protection class IP54 Drive and motor control optionally available.

Year of construction: 2019, condition: new, Aluminum flat belt conveyor without supporting structure 3000 mm flat Dimensions: approx. 3000 x 500 x 105 mm Aluminum construction: Hsdpfsff Hf Dox Am Tsr Belt width including wave edge 500 mm Belt color: green, 2-ply, particularly stable in the transverse direction, endlessly welded with a stepped joint * antistatic due to threads in the fabric of the running side Drive: Motor approx. 0.25 kW, speed 0.3 m/sec. * controllable with a frequency inverter Connection 220/400 V, 50 Hz, protection class IP54 Drive, motor control optional