Used Kbk Curves for sale (871)

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters – Type STN 30L/1 – 12/27 First registration 02/2024, from first owner Gedsz Am Evepfx Ag Tjuh V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover 4-inch flushing line throughout the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotatable outlet at the rear, 6 inches, with drain device 8-inch suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO trailer EBS with RSS stability program WABCO Optiturn – OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads, or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle is a lift axle Tires: 6 x 385/65 R 22.5 RENTING is the new BUYING, with us also available in full-service leasing – IMMEDIATELY AVAILABLE.

Condition: used, mileage: 178,100 km, power: 240 kW (326.31 HP), first registration: 09/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2027, color: black, gearing type: automatic, emission class: euro6, total length: 7,770 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 4,200 mm, loading space width: 2,435 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), * Special equipment: * Atlas loading crane with grapple and swivel servo function * Atlas 126.3 E 4 hydraulic outriggers * Crane outriggers extend fully hydraulically * Remote control * Two-sided tipper * Tipper flaps are suspended and can be folded down (spring-assisted) * Trailer hitch 3.5t, ball head * Trailer hitch G135, 40mm pin * Trailer brake 2-line, connections on the left * Trailer hydraulic two-circuit system * Tires 315/70R22.5 * Front axle 7/7 mm, rear axle 10/10 and 10/10 mm * Wheelbase 4300 mm * Compressed air connection in the cab Guodpfx Agsz Dcr Ee Teh * Rear axle air-suspended * Suspension: Front springs 7.5 t, 1 leaf * Auxiliary drive MB 131-2c * Parameterizable special module * Frame lowering without air spring residual pressure control * Seats in the cab: Driver's seat, comfort suspension seat * Exterior sun visor * Additional 24V socket in the passenger footwell * Other equipment: * Emission standard EURO 6 D * Axle configuration: 4x2 * Front axle 7.5 t * Trailer socket 24V / 15-pin * Antos * Audio system: Radio with USB connection * Exhaust pipe on the right, outside * Exterior mirrors, electrically adjustable and heated * Battery 170 Ah * Differential lock, rear axle * Compressed air tank, steel * Cab: Width 2.30 m * Cab: Hydraulic tilting mechanism * Cab: S ClassicSpace * Cab variant: ClassicSpace with 320 mm engine tunnel * Cab: Height 420 mm * Suspension: Leaf / Air * Electric windows * Windshield tinted * Generator 100 A * Transmission 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Manually operated sunroof (steel) * Comfort locking system * Fuel tank: 290 liters, aluminum * Engine 10.7 liters - 240 kW, R6 Diesel (OM 470) * Engine brake * Waste heat recovery * Disc brakes on front and rear axles * Seat cover / upholstery: Fabric * Seats in the cab: Passenger function seat * Splash guard, front * Stabilizer bar, front axle * 24V socket in the cab * Tachograph / EU control device * Underbody panel, aerodynamically shaped * Underrun protection, front * Preparation for toll collection * Front axle, curved * Regulated water pump * Permissible total weight 18.00 t Errors, changes and prior sale are subject to change

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. Guodpfjz Hx T Rex Ag Tsh SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, workpiece weight (max.): 800 kg, type of input current: three-phase, input voltage: 400 V, table length: 3,000 mm, table width: 1,500 mm, table height: 200 mm, operating pressure: 4,200 bar, warranty duration: 12 months, input current: 80 A, total height: 1,700 mm, total length: 4,500 mm, total width: 3,000 mm, overall weight: 6,000 kg, input frequency: 50 Hz, Like-new, high-end waterjet cutting system (3000 × 1500 mm) | 5-axis cutting head | 4,200 bar | German software For sale: a new, highly precise, top-of-the-line waterjet cutting system. This machine combines first-class mechanical engineering quality, state-of-the-art tolerance compensation systems, and intuitive German cutting software for maximum efficiency and cutting quality from day one. Highlights & Special Features Gsdpfxjz Eu Dcj Ag Tjuh Patented TSR system (automatic tolerance compensation): Play-free pre-tension completely eliminates the natural axis play and counteracts wear in the long term. Programmable mini-abrasive container: Precisely controllable metering quantity including corner metering. Guarantees perfect cutting edges with noticeable abrasive savings (including anti-blocking sensor and easy cleaning). Intelligent laser height scanner: Before the cutting process begins, the machining path is scanned, and the surface data is loaded directly into the control system. The cutting nozzle follows the curve fully automatically during cutting. Precision cutting head: Highly precise 5-axis cutting head for compensating the cutting taper and for demanding bevel cuts. Maximum protection & comfort: Integrated automatic splash guard and the option for low-noise and low-splash underwater cutting. Each system is fully measured and calibrated using a Renishaw laser interferometer before delivery. The result: Calibrated, highest precision for your production. Complete system / ready for immediate use Leasing or hire purchase is possible through our financing partner. Do you need a different output or table size? - No problem, we have several machines in stock or available on short notice. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland.

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN Guodpfx Aozuma Rsg Tsh - Grips: Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, overall weight: 19 kg, control type: manual, actuation type: manual, fuel type: electric, torque: 5 Nm, cutting height (max.): 305 mm, cable length: 4,000 mm, protection type (IP code): IP55, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, saw band length: 1,710 mm, saw band speed: 1,500 mm/s, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, NEW | 100% EUROPEAN PRODUCTION | DIRECT FROM MANUFACTURER The PBS300 is a professional portable bandsaw for beams, structural timber, solid wood and complex wooden components. With a cutting height of 305 mm and a weight of only 19 kg, it combines substantial cutting capacity with excellent mobility. Compatible with 6–13 mm blades, it handles tight curves, intricate contours and precise straight cuts in large timber sections. Ideal for carpentry, timber framing, joinery, workshops and construction sites. A practical tool for independent craftsmen and larger businesses alike, ready whenever precision and efficient cutting are required. BUILT ON EXPERIENCE Drawing on over 10 years of industry experience and feedback from thousands of direct customers worldwide, Astra Pro develops purpose-built woodworking tools. Our philosophy: professional equipment should be precise, reliable, easy to operate and affordable, without unnecessary complexity or investment. PRECISION CAST ALUMINIUM WHEELS The Ø203 mm wheels are cast from EN AC-43300 (AlSi9Mg) aluminium alloy according to EN 1706, with optimised mass distribution and reinforced geometry. Precision turning and dynamic balancing reduce rotational imbalance and vibration, supporting smooth operation, stable blade tracking and accurate cutting. DUAL BLADE GUIDANCE SYSTEM On one side, steel-and-aluminium guides feature precision EDM-machined grooves. Their 180° reversible design allows a second groove to be used, extending service life. On the opposite side, triple-bearing guides with standard 696 C3 bearings provide controlled blade support with low rolling friction. Together, both systems help reduce blade heating, friction and premature wear, supporting accuracy and longer blade life. ENGINEERED SIMPLICITY Blade tensioning and lower-wheel tracking adjustment are integrated into one mechanical system. Setup is intuitive, precise and straightforward. The frame uses carefully selected aluminium alloys, precision TIG-welded for durable joints. Potential failure points are minimised through thoughtful engineering. Routine maintenance is largely limited to cleaning, inspection and adjustment. INDUSTRIAL DRIVE & SERVICE A 0.75 kW industrial induction motor, 230 V / 50 Hz, S1 continuous duty, delivers dependable performance with low maintenance requirements. Standard blades, 696 C3 bearings and replaceable motor capacitors are locally available, helping minimise downtime. Original spares and accessories are supplied by Astra Pro. CUSTOMER FEEDBACK "Game changer for us." "What takes a lot of time and energy now is a 7-minute cut. I absolutely love it." "We use it all the time." Godpfjv Tcuxex Ag Tjuh "Amazed how it improved work." TECHNICAL DATA Model: PBS300 / T305XT Condition: New Cutting height: 305 mm Wheels: Ø203 mm, EN AC-43300, EN 1706 Blade: 1710–1712 × 0.65 mm Widths: 6 / 8 / 10 / 13 mm Guides: Reversible EDM grooves; triple-bearing 696 C3 Motor: 0.75 kW, 230 V / 50 Hz, S1 Weight: 19 kg 100% EUROPEAN PRODUCTION Every machine is manufactured entirely in Europe and individually hand-assembled in Poland. Declared dispatch: 3 working days from order confirmation. DISTRIBUTION OPPORTUNITIES Specialist dealers can expand their range with a distinctive machine addressing real, underserved market needs.

Condition: used, Year of construction: 1986, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 395 mm, cutting width (max.): 670 mm, roll diameter: 700 mm, saw band length: 5,150 mm, For sale is a used Panhans BSB700 band saw in a robust industrial design. The machine is ideally suited for precise longitudinal, transverse, and curved cuts in solid wood and wood-based materials. Thanks to Panhans’ solid construction, it is a reliable choice for carpentry shops, joineries, or woodworking workshops. Godpfx Ajz Rv Izsg Touh The machine is in used condition and has been in operation until recently. Inspection and functional testing are possible by arrangement. Sale is without warranty or guarantee due to the age of the machine.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor Gsdpfxoz Ru Iye Ag Touh The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 120 t, Hidrobrasil Glue Press – Laminated Timber Press – 12,000 mm – 12 × 10 t Cylinders For sale is a hydraulic glue press from the manufacturer Hidrobrasil, designed for the production of wood laminated beams up to 12,000 mm in length. The machine is designed for the industrial production of laminated timber and, thanks to individually or jointly controlled cylinders, offers high flexibility in the pressing process. Curved components can also be produced using appropriate molds. ===== Technical Data + Information: Hydraulic Laminated Timber Press ==== General Information - Manufacturer: Hidrobrasil - Model: Glue Press - Machine Designation: Laminated Timber Press - Design: Hydraulic Glue Press - Application Area: Wood Laminated Beams / Laminated Timber Production ==== Working Area - Max. Component Length: 12,000 mm - Max. Width: 150 mm - Max. Height: 600 mm (depending on wood type and configuration) ==== Press System - Number of Cylinders: 12 - Pressing Force per Cylinder: 10 t - Individual or Group Control Possible ==== Speeds - Downward Speed: 10 mm/sec - Upward Speed: 25 mm/sec ==== Hydraulics - Components: Bosch Rexroth (except cylinders) - Hydraulic Unit: External, located behind the press - Oil Tank: 500 l - Motor Power: 15 kW ==== Control - Control panel for individual or joint cylinder control - Adjustable pressure holding time ==== Special Features - Production of straight and curved laminated beams possible - High flexibility through modular cylinder control Gjdpfjg Tzbasx Ag Tjuh ===== Wood gluing, laminated timber production, timber construction, lamination, industrial wood processing Hydraulic press, hydraulic press, glue press, laminated timber press, laminating press, laminated timber plant, wood press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the construction of special machines and the automation of presses. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, mileage: 175,000 km, power: 125 kW (169.95 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,360 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,339 mm, total height: 2,050 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 3312BX ----Why Autonext? Over 400 vehicles (cars and commercial vehicles) immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available on autonext – Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----Excellent condition! 1st owner, German vehicle, non-smoker vehicle Complete service history, exclusively serviced at Ford Like-new all-weather tires (rear) Body type: High + Long Fully equipped ambulance/patient transport vehicle (RTW/KTW) Automatic transmission "Utila" stretcher Wheelchair ramp Emergency lights & siren Emergency horn Individual seat in the rear 2x air conditioning Auxiliary heater Heated seats Rear view camera Parking assist system front and rear Cruise control Audio-navigation system Ford SD (with Ford SYNC 3) 230V (external socket) Generator 240 A Inverter 230 Volt sockets with insulation monitor and fuse system Tinted rear windows (Privacy Glass) O² cylinder holder including connection Double locking system Rear step Fire extinguishers On request, we can offer you an aftermarket trailer hitch installation for only €599, and if possible, an increase in the permissible trailer load up to 3.5 tons. ---- Special features: * Audio-navigation system Ford SD (with Ford SYNC 3) * Digital radio reception (DAB+) * Audio/radio remote control on the steering wheel * Radio preparation, 6 speakers * Touchscreen color display (8 inches) * Tailgate with window * Heated rear window Gsdeylf Icepfx Ag Tsuh * Visibility Package 1 * Exterior mirrors, electrically adjustable and heated * Heated windshield * Tinted rear windows (Privacy Glass) * Heavily tinted windows * Double locking system * Deletion of 3rd row of seats in the cargo/passenger area * Windows in the cargo/passenger area: - opening * Generator 240 A * Rear window wiper * Configuration with specific central locking * Tire repair kit * Seats in the cab: heated passenger seat * Seats in the cab: heated driver seat * 230V / 150 Watt socket * Fleece battery 80 Ah (AGM, 2 batteries) * Thermal protection glazing cargo/passenger area, medium tint * Central locking with double locking Standard features: Windows in the cargo/passenger area: - fixed, 2nd row left, Window in the cargo/passenger area: - sliding, 2nd row left, Speed control system (cruise control), Steering wheel (leather), Turning light in headlight, Storage compartment in the headliner of the driver's cab, Airbag passenger side, Airbag driver side, Active curve light, Anti-lock braking system (ABS), Traction control system (ASR), Drive type: front-wheel drive, Exterior mirrors, electrically adjustable and heated, Turn signal in exterior mirror integrated, Floor covering: rubber in the cargo/passenger area (complete), On-board computer, Roof lining in the passenger compartment, Door entry lights, Electronic brake force distribution (EBD), Electronic stability program (ESP), Electronic traction control, Driving assistance system: hill start assist, Driving assistance system: emergency brake assist, Driving assistance system: crosswind assist, Window in the cargo/passenger area: - fixed, 2nd row right, Window in the cargo/passenger area: - fixed, 3rd row left, Window in the cargo/passenger area: - fixed, 3rd row right, Electric windows, Transmission automatic SelectShift - (6-speed), Grab handle B-pillar, Grab handles front, Glove compartme

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Equipment: center pivot plate, Archive images! Chassis: Steel welded construction, double-curved with low-bed at the front and rear of the axle assembly, low-bed inclined for easy access, turntable with robust ball bearing race, foldable rear support, shims, side impact protection, quarter-panel fenders Gsdpoi Ri N Uefx Ag Teuh Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed / rear axle: 6 pairs of lashing points on the side in the low-bed, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm, or instead of stake pockets, 5-ton ring lashing points embedded in the floor. Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lights, 2 white position lights at the front 2 white/red marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable plugs at the front Floor: front curve with steel/diamond plate surface, storage compartment embedded in the ramp incline, driving area and in the middle between the beams with steel/diamond plate surface, rear incline with 70 mm softwood floor, low-bed platform including rear incline 5900 mm Ramps: attachment rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Condition: used, Year of construction: 2024, operating hours: 682 h, functionality: fully functional, working width: 510 mm, area performance: 1,530 m²/h, overall weight: 240 kg, tank capacity: 55 l, This used, trailing-type scrubber dryer BD 50/55 W Classic from Kärcher (year of manufacture: 2024 | operating hours: 682) has been technically overhauled and cosmetically refurbished in our in-house workshop. The brush head and suction bar have been newly powder-coated. New suction strips and a new disc brush have been installed. Gedpoz Nd Nqefx Ag Touh Thanks to its compact design, the machine offers excellent visibility. The self-explanatory operation allows for easy starting and reduces the need for training. The standard curved suction bar ensures rapid drying thanks to the reduced residual water on the cleaned surfaces. The integrated drive system and the comfortable four-wheel system make it easy and energy-efficient to operate. An externally supplied charger ensures that the batteries are charged during daily use. The BD 50/55 is suitable for use in public buildings, in retail stores and car dealerships, as well as in industrial environments. Technical data: Working width, brushes: 510 mm Working width, suction: 850 mm Tank capacity, fresh/dirty water: 55 / 55 l Theoretical area performance: max. 2550 m²/h Practical area performance: 1530 m²/h Permissible total weight: 240 kg

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 128 h, load capacity: 3,500 kg, lifting height: 4,800 mm, free lift: 1,520 mm, fuel type: electric, mast type: triplex, construction height: 2,212 mm, fork carriage width: 1,110 mm, fork length: 1,200 mm, empty load weight: 4,584 kg, total length: 2,770 mm, drive type: Elektro, construction width: 1,260 mm, Electric 4-wheel forklift Load center: 500 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire size: 28x9-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 600Ah Battery manufacturer: KION Battery type: PzS Battery condition: New Triple free-lift mast VFHM4800 Triple free-lift mast with full free lift, side shifter CSPEAR 3-3.5t 1100mm Guedpfx Asz H D N Dsg Tjh 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, CE certificate, safety light, windshield washer system, heated rear window, roof window according to specification, comfort leather seat with CE, with ISO valve, panoramic mirror, 2 exterior mirrors, driver's compartment equipment: 2 grab handles on the overhead guard at the rear right with horn, hydraulic control: multi-lever control, 4 independent levers for lifting, tilting and additional hydraulics to the right of the seat, with clamp release on the fourth lever, 3.5-inch color display, shift lock: via PIN code, driving control: one-pedal control, switching of the direction of travel on the hydraulic control, USB charger and external charger 12V/10A, lighting system: LED version, front: 2 protected LED headlights with direction indicator; rear: LED tail and brake lights, direction indicator, hazard warning lights, mechanical foot parking brake, Curve Speed Control: The steering angle-dependent speed limitation reduces possible damage to goods by means of an appropriate cornering speed, 3 selectable driving programs available in the 3 operating modes Standard, Performance and Eco.

Condition: used, Year of construction: 2008, Suitable for unmanned grinding or re-serration and chamfering of HSS and segment sawblades as well as solid carbide saws with ceramic saws and for deep grinding with CBN or diamond grinding wheels. Guedpfx Aez Nxh Ijg Teh Accessories: Total enclosure including 400 L coolant system with tank and fine filter, Device for automatic chamfering of regularly spaced saw blades, Device for automatic grinding of chip breaker grooves, Program for standard curved and pointed teeth, Special program for grinding saws with variable tooth pitch, CAD program for creating 250 custom tooth shapes, Automatic saw blade diameter adjustment, Automatic fire extinguishing system including explosion vent and pressure switch, Laser measuring system for automatic measurement of saw blade diameter, Automatic central lubrication, Oil drip tray, 2 saw blade holders, 2 centering rings, Machine light, Electrostatic mist extractor LTA.

Condition: used, Applied Type: Applied Biosystems ViiA7 Biosystems ViiA7 Specifications: Block change from the front of the instrument in less than 1 minute; no secondary tools required Supported applications: Standard curve, comparative CT, genotyping, presence/absence, HRM, melting curve Temperature uniformity: ±0.5 °C, within 30 seconds after reaching the target temperature Run time: ~35 min for 96/384-well blocks with Applied Biosystems® Fast Master Mix Supported blocks and volumes: 96-well standard (10–100-μl reactions) 96-well Fast (10–30 μl reactions) • 384-well (5–20 μl reactions) TaqMan® Array Micro Fluidic Cards (~1 μl reactions) Detectable sensitivity: up to 1 copy • Excitation/detection wavelengths: 6 excitation (450–670 nm) 6 emission (500–720 nm) • Dynamic range: Up to 9 logs linear dynamic range Resolution: Detects only 1.5-fold changes in target quantities in a singleplex reaction 21 CFR p11 Enablement: Security, audit, and e-signature functions for instrument data Automation: Includes plate loading arm with barcode (distribution, service, and support provided by Life Technologies) Remote notification: Notifies the user via email when the run is started, stopped, or aborted Data export format: Fully configurable by the user Description: Gusdpszd Ud Njfx Ag Tjh Applied Biosystems Real-time PCR ViiA7. Ideal for performing real-time PCR with medium to high throughput. Interchangeable blocks for 96-well, Fast 96-well, and 384-well plates, as well as TaqMan Array Cards. Fast block change. Touchscreen interface. 2x Ethernet connection. 2x USB connection. 1x RS 232 connection. 2x connection on the display. Weight: 67 kg Condition: used Scope of supply: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Anton Paar Modular Rotational Rheometer / Precision Rheometer Software: Anton Paar Rheoplus (original CD included) Device driver and license diskette available Anton Paar Physica MCR 301 Professional rotational and oscillatory rheometer for research, development, quality control and material testing For sale is a used rotational rheometer from the manufacturer Anton Paar. The device is suitable for highly precise rheological characterization of liquids, polymers, dispersions, emulsions, pastes, gels and other materials. The MCR 301 is one of the professional laboratory instruments for research, development, quality assurance and industrial material testing. Technical data: Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Device type: Modular rotational rheometer Measuring principle: Rotational and oscillatory rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Normal force measurement integrated Modular measuring system for different measuring geometries Power connection: AC 100–240 V Mains frequency: 50–60 Hz Power consumption: 850 W PC connection: RS-232 / Ethernet (depending on the configuration) Software: Anton Paar Rheoplus Operation via LCD display and membrane keypad Environmental conditions: Operating temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage temperature: -20 °C to +50 °C Relative humidity: 20–60 % (non-condensing) Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measurement possibilities: Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Equipment: Air-bearing precision drive LCD display with control panel Electronic control Measuring head Measuring platform PC interfaces Rheoplus software CD Original documentation Operating manual Diskette with software data Connection cable Accessories as shown in the pictures Application areas: Research & Development Laboratory Quality assurance Chemical industry Pharmaceutical industry Godpszicwuefx Ag Teuh Cosmetics industry Food industry Polymer technology Materials science Universities Testing laboratories Scope of delivery: Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder Diskette Connection cable Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. Nameplate is present. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder or parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or email.

Year of construction: 2021, condition: new, ebmpapst EC-centrifugal module, backward-curved, single-intake, with support bracket Gjdpei D Ehpjfx Ag Tjuh Type: K3G250-PR04-H2 Motor: M3G084-DF Phase: 1~ Nominal voltage: 230 VAC Nominal voltage range: 200 .. 277 VAC Frequency: 50/60 Hz Method of obtaining data ml Speed: 3080 min-1 Power consumption: 500 W Current draw: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new and in priginal packaging with 18 pieces per pallet of the production year 10/2021. There are several pallets available. Incl. packaging ex works 53567 Buchholz (Westerwald), Germany. We will gladly organise freight. Please enquire about freight costs, stating the destination.

Year of construction: 2021, condition: new, ebmpapst EC-centrifugal module, backward-curved, single-intake, with support bracket Type: K3G250-PR04-H2 Motor: M3G084-DF Phase: 1~ Nominal voltage: 230 VAC Nominal voltage range: 200 .. 277 VAC Gsdpfx Asi D Ei Aog Touh Frequency: 50/60 Hz Method of obtaining data ml Speed: 3080 min-1 Power consumption: 500 W Current draw: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new and in priginal packaging with 18 pieces per pallet of the production year 10/2021. There are several pallets available. Incl. packaging ex works 53567 Buchholz (Westerwald), Germany. We will gladly organise freight. Please enquire about freight costs, stating the destination.

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling Guedpfxjtqfv Ij Ag Teh CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: new, machine/vehicle number: 357, Thermo Scientific Multiskan FC Microplate Photometer 357 with Incubator A wide range of applications, from enzyme kinetic studies to Lowry assays. The Multiskan FC covers a wavelength range of 340 to 850 nm, enabling a variety of different applications, from enzyme kinetic studies to Lowry assays. The instrument performs fast and accurate measurements. For example, a complete measurement of a 96-well plate is possible in less than seven seconds. The instrument is equipped with a linear shaker as standard. A model with an incubator reaches incubation temperatures up to 50 °C and is capable of reading 384-well microplates. The SkanIt software supports optimal use of the instrument through a visual workflow, effortless data analysis, and export functions. Features In addition to the common features of all microplate readers, the Multiskan FC offers: SkanIt Software Gsdstt R Syepfx Ag Teuh The SkanIt software can be used to control the Multiskan FC and supports the optimal use of the instrument's functions with a visual workflow, easy data analysis, and export functions. Wide Wavelength Range A wavelength range of 340 to 850 nm for a variety of applications such as ELISA immunoassays, protein quantification, endotoxin, cytotoxicity, and proliferation assays, enzyme assays, and growth curves. Pre-installed Filters Equipped with a filter wheel with eight positions and three standard filters, 405, 450, and 620 nm. Additional filters are easy to install and can be ordered. Proven Performance and Reliable Results Integrated self-diagnosis functions, IQ/OQ, and verification aids make this instrument reliable and trustworthy. Specifications Compatibility: Robotic Detector Type: Photodetector Incubator Temperature: Room temperature +4 °C to 50 °C Interface: User: Integrated or via PC Light Source: Quartz glass halogen lamp Measurement Speed: 7 s for 96-well plate (fast mode), 13 s for 96-well plate (normal mode) Measurement Technology: Absorption Plate Type: 96-well plate, 384-well plate Product Line: Multiskan™ Shaking: Linear Software Type: SkanIt Software Wavelength Selection: Filter Accuracy: ± 1% (0 to 3 Abs) or ± 0.003 Abs. The larger value at 405 nm applies. Depth (US): 15.7 in. Depth (metric): 40 cm Filter: Filter wheel with eight slots; installed filters: 405 nm, 450 nm, and 620 nm Height (US): 8.7 in. Height (metric): 22 cm Hertz: 50/60 Hz Linearity: 96-well plate: 0 to 3 Abs, ±2% at 405 nm 384-well plate: 0 to 2.5 Abs ±2% at 405 nm Precision: CV ≤ 0.2% (0.3 to 3 Abs) at 405 nm Resolution: 0.001 Abs Voltage: 100/240 V Wavelength Range: 340 to 850 nm Width (US): 11.4 in. Width (metric): 29 cm Unit Size: Each You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Gjdpfx Agelfilyj Tjuh Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey

Year of construction: 2014, condition: like new (used), machine/vehicle number: 20020235 UG, DEMAG ALU crane canopy Crane runway dimensions approx. 6x4m Payload / lifting capacity 250 KG - 0,25to Technical data of the system: Crane runway made of Demag aluminum rails 180mm with internal power supply System is supplied complete: Rails, rail connectors, trolleys, end plates, cable drag, brackets/hangers etc. Guedpfxety S A Ne Ag Teh incl. Demag DCS PRO2-250 NL 250KG chain hoist - lifting speed 0-16m / min !!! Demag DCS chain hoist 250KG (NEW PRICE 4700 Euro !) Can also be exchanged for a standard model DK2-250 to reduce costs - please inquire ! NEW CONDITION - installed in clean room ! Crane is disassembled and immediately available Mint condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Demag KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with lifting capacity and dimensions.

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting Guodsrbz T Njpfx Ag Tjh - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: good (used), DIASORIN Liaison Type 2229 Immunoassay Analyzer The LIAISON analyzer combines a flexible operating module with a broad assay menu and, due to its long walk-away time, results in high efficiency. Guodpsu D D N Nsfx Ag Toh The ability to perform up to 15 different assays simultaneously ensures efficient testing, even with a small number of samples. The LIAISON analyzer was developed for immunoassay tests and uses a “flash” chemiluminescence immunoassay (CLIA) technology with a paramagnetic microparticle solid phase (MP). The LIAISON analyzer is efficient from the outset and allows for the continuous loading of samples and reagents; the workload can be processed in direct access or batch mode. All test methods are based on an internal master curve with 2-point calibration. Autodilution, repeat, and reflex tests are performed on request by the operator and are carried out automatically by the system. The LIAISON system also has a STAT function to improve laboratory efficiency. Item condition: used Scope of delivery as shown in the picture You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Godpsy Ehcdofx Ag Touh Location: ex-stock 54634 Bitburg - immediately available -