Used Kdg Mobrey Float Switch for sale (6,383)

Condition: new, power: 68 kW (92.45 HP), fuel type: diesel, fuel tank capacity: 128 l, tire size: 12.5x18-12, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, all wheel drive, = Additional options and accessories = - Adjustable seats - Bucket - Intercoolor - Seat ventilation - Stabilizers - Tool box = Remarks = Country of origin: INDIA Displacement: 4,400cc Torque: 408Nm (41.6 kgm) @ 1200rpm Dimension: 5,960 x 2,350 x 3,610 Brakes: Service: Hydraulically actuated dual line,Parking: Hand operated, disc brake on rear axle,2WD / 4WD: Electrical selection Bucket size: 1.1 Cubic meter Attachments piping: Available Gearbox type: JCB, Synchroshuttle ,4 forward/4 reverse Mainframe: 2ws Sideshift Gear Pump: 123lpm Cab: Shower A/C Pack Hvac Rops ,Fully adjustable seat and soft touch steering wheel ‘Walk through’ two door access Seat belt large convex rear view mirror interior light front screen wiper horn hazard warning system Instrumentation panel includes engine speed engine hours speedometer fuel level water temperature gauge and 12v connection Audible and visual fault warning system for alternator charge coolant temperature engine oil pressure blocked air filter Ndedpfsy Tyltjx Aazob transmission oil pressure and temperature and hand brake on Excavator End: 14' Std Lift Fixed Dipper Loader: Std 3 Spool Float Only Loader Aux Pipework Excavator Controls: Manual (Jcb) Hammer Pipework Gp 1.1m³ Shovel Excavator Bucket: Std 600mm (24") Profile Sae Capacity: 180 Liters Steering: Front wheel full power hydrostatic system utilising the main hydraulic pump via a steering priority valve In the event of engine failure emergency steering is maintained Electrical and Instrument: 12 volt negative ground utilising wiring and connectors meeting IP69 water ingress test standard. Central fuse panel LiveLink standard Bluetooth radio standard Guide me home lights switches on the external lights for 30 seconds to assist operator to walk safely after parking machine Battery: 130 A/hr 900 CCA. Alternator: 90 amp standard. Front working lights: 2 fixed Rear working lights: 2 fixed and 2 adjustable Hydraulic System: JCB vari-matic hydraulics Main relief valve: 228bar Unloader valve: 207bar Filtration through suction strainer and return line JCB Filtermatic filter During excavation the circuit automatically varies hydraulic power to match digging conditions for extra performance control and power Careful routing of hydraulic hoses and pipework guards against site damage and allows easy servicing JCB diagonal (X) pattern controls = More information = Technical information Number of cylinders: 4 Engine capacity: 4.400 cc Axle 1: Tyre size: 12.5x18-12 Axle 2: Tyre size: 16.9x28-12 Engine type: JCB 444 Measures and weights GVW: 7.800 kg Dimensions (LxBxH): 596 x 235 x 361 cm Wheelbase: 224 cm Other information Excavator bucket: 1.1 m^3 Gearbox type: synchronized

Condition: good (used), 3D Systems ProJet MJP 2500 Plus MultiJet 3D Printer Description: Professional MultiJet 3D printer / MJP system 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD printing mode For sale is a used professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for the production of precise plastic components, functional prototypes, concept models, as well as jigs and tool applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Printing modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD mode: 800 × 900 × 790 DPI Layer thickness: 32 µm UHD mode: 1600 × 900 × 790 DPI Layer thickness: 32 µm Dimensions: 1120 × 740 × 1070 mm (W × D × H) Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Nedoz Erdaopfx Aazedb Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet USB Features: Integrated touch display Material system for build and support material Automatic material bottle switching Network connection USB port 3D Sprint software support Material containers as shown in the pictures Applications: Functional prototypes Concept models Form and fit testing Jigs and fixtures Tool applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Shipping by freight forwarder possible. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Nedpfx Aasz Ehvxjzedb

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 850 mm, controller model: Heidenhain iTNC-530, spindle speed (max.): 6,000 rpm, The machining center underwent a complete overhaul and was repainted in 2025! TECHNICAL DETAILS Travel distances Travel distance X-axis: 2,600 mm Travel distance Y-axis: 700 mm Travel distance Z-axis: 850 mm Spindle Spindle speed: 6,000 rpm Distance from spindle nose to table surface with vertical head: 40 - 890 mm Distance from spindle nose to table surface with horizontal head: 250 - 1,100 mm Spindle interface: HSK A63 Spindle motor power: 20 kW Table Table size: 3,060 x 800 mm Max. table load: 1,200 kg/m² Feed rate Rapid traverse rate X/Y-axis: 40,000 mm/min Rapid traverse rate Z-axis: 30,000 mm/min Swivel head Automatic swivel head B-axis: ± 90° Smallest automatic head rotation B-axis: 0.001° Tool magazine Number of tool magazines: 2 Tool positions per tool magazine: 22 Total tool positions: 44 Tool diameter max.: 85 mm Tool length max.: 400 mm MACHINE DETAILS Control model: Heidenhain iTNC-530 Footprint: 9,600 x 3,300 mm Ndsdpjzkhvfsfx Aazob Machine height: 3,400 mm EQUIPMENT Continuously variable, automatically swiveling head on B-axis ± 90° Two tool magazines, each with 22 positions High-pressure coolant supply through the spindle Chain-type chip conveyor Operating and maintenance manuals CNC manuals The following work was carried out on the machine in 2025 for the overhaul: Disassembly and overhaul of the ball screw drive or the axis spindle, and replacement of the bearings of the X, Y and Z axes Re-grinding of the wedge/guide strips of the X, Y and Z axes Repair of the dual tool changer, including replacement of the defective encoder, sensor and energy chain Straightening and replacement of bent sheet metal Replacement of oil and filters, and cleaning of the tank Disassembly of the machine table for repair, calibration and cleaning Repair of the coolant tank with restoration of the float switches, paper filter sensors and pumps Repair and/or replacement of push buttons, damaged cables, fans, connectors and sensors of the dual workstation Replacement of the bellows of the X-axis with new parts

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data Ndsdpfexvca Ajx Aazeb 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SN: B397497, Equipment: type plate available, Three-phase oil hermetic transformer Type: 1000 kVA 20/0.4 kV Dy11 with significantly reduced losses according to Directive 2009/125/EC EU Regulation No. 548/2014 Rated power: 1000 kVA High voltage: 20 kV Low voltage: 400 V Tapping: +/- 2 x 2.5% Frequency: 50 Hz Vector group: Dy11 HV terminals: external cone according to DIN 47 636-2, 250 A LV terminals: according to DIN EN 50386 with connection flags Equipment: thermometer Nedpfswxm E Dex Aazedb

Condition: new, Power contactor, 55 kW, screw-mounted 3RT1054-1NP36 SIEMENS Nodpszr T Shefx Aazedb

Condition: new, Year of construction: 2022, TITTAL Filter fan SK3323 100 Year of manufacture approx. 2019 Ndjdpfx Aajzl S Saszsb

Condition: good (used), Year of construction: 2005, NEC Serial number: JA5L522D0729 FD1231H FOR ARBURG machines Year of manufacture: 2005 Ndsdpfx Aaszl Tbcszob

Condition: used, ABB REF542plus Base Unit/ Field Control and Protection Device Please refer to the pictures for data Nsdpfotpwkqjx Aazedb Used, functional, slight signs of wear, device was not used online

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Ndsdpfx Aevi H Dieazob Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Nedefnvviepfx Aazodb Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW Nsdpfog Ewwrjx Aazodb *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) Nodporbzygjfx Aazodb AEG Thyro-A: Thyristor 400 V 350 A Cooled Power regulator Load supervision on analog outputs

Condition: excellent (used), Year of construction: 2001, Krones stand control desk with B&R IPC 2001 type CTS10, Siemens power supply and S7 ET 200L Ndedpfxjpbwfie Aazeb verdrate on terminals.

Condition: used, Pressure gauge, flow meter, measurement and control technology, liquid flow meter, float switch, flow monitor -Manufacturer: Kobold, flow meter flow monitor -Type: 70-75 -Dimensions: 160/40/H90 mm Ndodpfouwggqox Aazeb -Weight: 1.7 kg

Condition: excellent (used), Capacity: 2.5 tons Ndjdpfew U Aurox Aazeb Year of manufacture: 2017 Operating pressure: 150 bar Weight: 1100 kg Dimensions: 1800 × 1800 × 2200 mm Transport wheels included Tools not included in delivery

Condition: used, Year of construction: 2014, functionality: fully functional, -KOM 3091- Njdpfewl U Sxox Aazedb Offered here are Leuze photoelectric sensors. The photoelectric sensors are in good condition. They were previously used in a set of two as safety sensors. A total of six Leuze photoelectric sensors of this type are available.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Ndodpfxjzylxie Aazeb Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: used, mileage: 95,797 km, power: 200 kW (271.92 HP), first registration: 09/2022, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: orange, gearing type: automatic, total length: 5,950 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: air conditioning, all wheel drive, compressor, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to availability, errors, printing errors, and prior sale: Unimog U427L municipal vehicle with 2 mowing bars + winter service spreader attachment (Vehicle 104) First registration: 09/28/2022 95,797 km 4,440 operating hours Engine: 7,698 cc 200 kW / 272 hp Permissible gross vehicle weight: 14,000 kg Unladen weight: 6,820 kg Payload: 7,180 kg Overall length: 5,950 mm x overall width: 2,550 mm x overall height: 4,000 mm Euro 6 CI/SI, 130 (Euro 6 E) Permissible total train weight: 35,000 kg LOF-approved towing coupling for equipment carriers TÜV (technical inspection): 11/2026 Model designation: Unimog U427L with Mulag MFK 500 & MHU and Aebi Schmidt Stratos S30-24 4x4 all-wheel drive Wheelbase: 3,600 mm Cab: MB 2603 low-roof Front and rear differential locks, axle ratio i=6.377, portal axles Coil springs with progressive characteristic, axles with 3-way steering Disc brakes front and rear ABS, switchable off-road mode Compressed air connections for auxiliary consumers Integral support at the front for mounting a front working plate incl. Air conditioning, multi-function steering wheel, adjustable, engine brake, radio/CD, tachograph, 2 power windows, mirrors with heating, electric cabin floor with passage Storage compartments and stowage box Center console with central controls, 2 compartments Trailer socket, 12-pin Continuous power socket in the center console, 24 V / 15 A Rain sensor, rear window MB full-synchronous transfer case UG100E, 8 forward / 6 reverse gears Electro-pneumatic shifting EPS Exhaust system with upward-pointing tailpipe, diesel tank 200 l, daytime running lights, headlight range adjustment High-performance engine brake Speed limiter 90 km/h, cruise control 2x wheel chocks Vario Pilot Front mounting plate DIN 76060, Type B, Size 3 Swivel seat, right mowing seat Additional steering stick switch on the left Front camera, rear view camera Generator 28V/150 A Voltage supply 24 V, switchable in the roof Mowing door on the right Heated windshield Nsdpfx Ajzviugeazodb Easy Drive hydrostatic drive Tilting cylinder Compressed air line at the rear, 2nd hydraulic circuit Hydraulic coupling at the rear, 4-way, cell 1+2, separate oil return line at the rear Hydraulic system for tilting device, tilting coupling for trailer Hydraulic system, 2-circuit, 4-cell, fully proportional, snowplow system Tachograph Gen 2, ADR Warning light for telescopic cylinder Hands-free phone system preparation Headlight cleaning system Bi-xenon, LED daytime running lights LED high beams, additional on the roof rack, warning lights LED yellow, left and right with tripods Working spotlights on the roof at the rear, LED Additional spotlights, adjustable on the A-pillar Engine PTO, rearward with flange, engine-driven PTO incl. front PTO, PTO speed limiter Flatbed substructure Trailer coupling, large clevis, ring spring, bolt 38.5 Steep shoulder rims 11.75x22.5, tires 385/65R22.5 front approx. 50%, rear approx. 80% Fire extinguisher 2 kg Tire filling hose with pressure gauge Rear-mounted mower MHU 800, produced in 2020, designed for right and left operation, reach 7.30 m from the center of the vehicle, boom swivel range 204 degrees Floating position can be switched on and off, quick-change device Boom relief control system Type AER, CAN bus, boom relief system withronic Multi-function lever, armrest control Equipment drive hydraulic motor PTO Pa

Condition: like new (used), Year of construction: 2013, Medium voltage switchgear - primary distribution - manufacturer SIEMENS, type NXAIR, 2500A 12kV 40kA - total of 12 bays operated at 6kV ( possible on 12kV ), ABB digital protection. Complete documentation, very good condition, single line diagram will be sent upon request. Ndodpfx Aaozuvy Tszeb

Condition: like new (used), Year of construction: 2024, operating hours: 7 h, functionality: fully functional, total height: 1,620 mm, total length: 1,760 mm, total width: 700 mm, type of input current: three-phase, tank capacity: 285 l, input voltage: 400 V, rotational speed (max.): 2,850 rpm, input frequency: 50 Hz, water tank capacity: 440 l, Water treatment and recycling unit for process water Z 800K HA TURBO FLOC – 2024 | Almost like new For sale, a professional water treatment and recycling unit for process water, model Z 800K HA TURBO FLOC. The system was manufactured in 2024 and has only been in operation for 7 hours, making it practically new. The unit is designed for effective treatment of process water and its subsequent reuse. Thanks to the use of a centrifuge and the Turbo-Floc flocculation system, it significantly reduces water consumption and operating costs for the plant. Technical specifications: treatment capacity up to 1200 l/h, system dimensions: 1760 × 700 × 1620 mm, centrifuge dimensions: 995 × 680 × 580 mm, drum rotation speed: 2850 rpm, RAL 7035 paint finish, automatic water removal from the centrifuge during braking, polyurethane sludge basket, electromagnetic safety valve. Buffer tank (285 l): made of HDPE plastic, equipped with a Turbo-Floc system for automatic dosing of coagulant or flocculant, additional filter on the inlet of process water, two float switches controlling the liquid level, pulsed power supply by P-3 pump. Clean water tank (440 l): made of HDPE polyethylene, supplies the devices with treated process water, equipped with an efficient P9 diaphragm pump: capacity 7.8 m³/h, working pressure 4 bar, water level control. Control and monitoring system: monitoring of filling and sludge basket replacement, timer relay and light signaling (flashing lamp), PLC controller E60-420, supply voltage 400 V / 50 Hz, control voltage 24 V DC, Nsdpfx Aaozcybrszodb protection class IP54, operating temperature from +5°C to +40°C, safety feature that prevents the centrifuge from starting unless the cover is opened and closed beforehand. Additional equipment: DP1 dosing pump for coagulant supply, dosing capacity 0–1 l/h, Turbo-Floc flocculation mixer with mixing blades on both sides of the diagonal, special conical guide plates made of stainless steel, mounted inside the centrifuge. The unit is in excellent technical and visual condition. It is an ideal solution for industrial plants using vibration treatment, where effective water treatment and reuse are required. Year of manufacture: 2024 Operating hours: 7 We invite you to contact us for more information and to arrange a demonstration of the unit.

Condition: excellent (used), input voltage: 10,000 V, Medium-voltage switchgear – Siemens Nodjzdbtljpfx Aazodb

Condition: good (used), Full Onion Peeling Line, Comprising of- -Onion Peeler, manufactured by M&P Engineering MP 16584, The Large Onion Peeling Machine from M&P Engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance Ndodpfx Aaozzpu Dszsb -Dolav Tipper -Elevated Conveyor -Roller Table -Onion Washer

Condition: as good as new (ex-display), Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm Njdpfxexabu He Aazsdb - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder