Used Kojima Hydraulic Press for sale (26,400)

Condition: used, Year of construction: 1987, Press force: 160 t Stroke: 200 mm Throat depth: 360 mm Gbodpszymdaefx Aayst Passage between frame columns: 590 mm Shut height (stroke up): 500 mm Table area: 920 x 700 mm Table opening: 150 mm Table height above floor: 960 mm Ram area: 620 x 560 mm Downstroke speed: 390 mm/s

Year of construction: 2002, condition: good (used), Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Gjdpen Tnv Eefx Aayebt Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: used, Year of construction: 1975, Press force: 200 t Stroke: 600 mm Gbsdpfxjzynf Eo Aayet Frame width: 1910 mm Side frame opening: 1000 mm Shut height (stroke up): 800 mm Table area: 1900 x 1150 mm Cushion force in table: 80 t Cushion stroke in table: 300 mm Cushion area in table: 1500 x 950 mm Table height above floor: 800 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, stroke length: 400 mm, table width: 600 mm, table length: 600 mm, Equipment: documentation/manual, OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Gbsdpey Szm Nofx Aayot Stroke 400 mm

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Gsdpfxsdzp Trj Aayobt Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz - Hydraulic draw cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: used, Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine type: Hydraulic press Year of manufacture: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table area: 2,000 × 1,550 mm Ram area: 2,000 × 1,540 mm Front opening: 2,000 mm Side opening: 1,050 mm Table height: 800 mm Rapid traverse: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Pulling cushion: no Equipment: Complete DREHER strip system DREHER strip unwinder DREHER strip feeder DREHER strip conveyor system Hydraulic die cushion with parallel movement Hydraulic roll blocks Tool changing consoles Siemens SIMATIC control panel Note: The system is currently running at a slow speed but has no significant damage. We will gladly send you videos of the machine in operation upon request. Gbodpfx Aozrz D Ssayst

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Gsdpfx Aoy Rtg Eeayjbt

Condition: good (used), functionality: fully functional, PYE 160 S/1M hydraulic press. Gjdpfjzdlrqox Aayebt

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Gjdpfx Asx Ug Doayebt Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: used, Year of construction: 1987, Press force: 315 t Stroke: 750 mm Frame width: 1700 mm Side frame opening: 1100 mm Shut height (stroke up): 1250 mm Table area: 1600 x 1300 mm Cushion force in table: 125 t Cushion stroke in table: 350 mm Gbjdpfx Aajzynk Ioyst Cushion area in table: 1000 x 900 mm Table height above floor: 750 mm

Condition: used, Year of construction: 1987, Pressing force: 65 t Gedpezyl Dfofx Aaysbt Stroke: 1100 mm Frame width: 930 mm Side frame opening: 705 mm

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressing force: 110 t, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Gjdodxrqwopfx Aayobt Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Condition: good (used), Year of construction: 1999, machine/vehicle number: H99-2989, functionality: fully functional, power: 24 kW (32.63 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 63 t, stroke length: 420 mm, operating speed: 92 mm/s, reverse speed: 430 mm/s, table width: 620 mm, table length: 520 mm, table height: 1,000 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 610 mm, clearance between the columns: 800 mm, oil tank capacity: 700 l, total length: 1,400 mm, total width: 1,900 mm, total height: 3,800 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, For sale: hydraulic drawing press, in good condition, including drawing die (force 250 kN, stroke 150 mm, drawing die area 300 mm x 420 mm). UVV inspections (occupational safety inspections) were carried out regularly, most recently in 2024. The machine was used in single-shift operation for prototype production. Gbedpjzl R Imjfx Aayjt Price excludes dismantling and transportation.

Condition: excellent (used), Year of construction: 2001, - 1 Schuler press - Capacity: 1000 tons - Stroke: 1,300 mm - Die cushion tonnage: 30 - 200 tons - Die cushion stroke: 200 mm - Daylight between press frames (Pmi): 800 mm - Work area: 2,500 x 2,100 mm Gbjdpfxezy Uuyo Aayjt - Movable tables for press: 2 - Approach speed: 600 mm - Working speed at 50%: 96 mm - Working speed at 100%: 46 mm

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Gbedpfxeg Iihws Aayot Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: as good as new (ex-display), Year of construction: 2018, pressing force: 110 t, pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Gedpfx Aefhcc Teaysbt Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports Gbjdsxaabfopfx Aayjt - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: good (used), Pressure 63to Gjdpoch Dacefx Aayjbt Stroke -400mm Distance ram-table 700mm Table size 1800x500mm MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Gbedpfx Aezzc Iqoayjt Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm Godpfx Asd Ih Nrjayobt table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Condition: used, Year of construction: 1960, pressure 1000 t stroke 600 mm Godpfx Aow Syd Eeayebt weight of the machine ca. 4 t

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Gjdpfx Aszvfqksayobt Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: good (used), Year of construction: 2003, functionality: fully functional, type of input current: three-phase, pressing force: 10 t, stroke length: 200 mm, operating speed: 260 mm/s, table width: 430 mm, table length: 440 mm, oil tank capacity: 46 l, overall weight: 800 kg, Equipment: documentation/manual, safety light barrier, J.A.M "Japan" made 10 ton hydraulic press for sale in excellent condition. Manufacturer JAM HYP-1000 model Model year 1995 Capacity 98KN (10t) Stroke length 200 mm Open height: 395 mm Table size 440 × 430 mm Punch hole φ32 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 19 mm/s Ram return speed: 219mm/s With light safety device Two-handed operation. Voltage 3 phase 200v 1.5kw Press body weight: 800kg Operating oil: 43 liters Height (mm) 1395 Width (mm) 700 Depth (mm) 1170 If you need more information. We are here to help! Please contact us using the contact form or give us a call Gbsdpfevbfkrex Aayet Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm Gbjdpfx Asxukpceayet stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm hole in the table 130 mm

Year of construction: 2002, condition: used, Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Gbedpfx Aaof A R Adoyst Free standing hydraulic press complete with hydraulic cushion.