Used Leuco Hm 166720 for sale (1,672)

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Rcedpfxjpy Dxro Am Tsd Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: used, Year of construction: 1998, sheet width:130 mm coil weight:0,150 t Redpeh Ra I Tefx Am Tscd coil internal dia.:300 mm coil external diameter:1000 mm dimensions of the machine ca.:0,75 x 1,50 x 1,70 m volt:230 V total power requirement:0,25 kW weight of the machine ca.:0,3 t Motor-driven Decoiler with mechanical central expansion, stepless coil speed, tip switch, emergency cut-off.

Condition: used, This listing is for a Leica HM-LUX Microscope Objectives 10/0.25 Rcedpjxzhh Nefx Am Ted 40/0.65

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 t Redpfx Asd Sqrrem Tecd Screw diameter: 40 mm Operating hours: 77,890 h Tie bar distance: 42 x 42 cm

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling Rcodjzc Hvpepfx Am Ted • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Year of construction: 2002, condition: ready for operation (used), Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible. Rcodpfx Ajy T Sdzjm Ted

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Rodpfxjyzpm Nj Am Tjcd

Condition: good (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 251 cm³, total length: 4,650 mm, total width: 1,450 mm, total height: 2,050 mm, overall weight: 4,600 kg, type of input current: DC, input frequency: 50 Hz, input voltage: 460 V, For sale is an injection molding machine from Battenfeld, model HM1000-75 131426-100. The machine is in excellent condition and is ready for immediate use. Technical Data: Model / Type: HM 100/750 S Year of manufacture: 2008 Total weight: 4,600 kg Hydraulic operating pressure: 275 bar Pneumatic operating pressure: 6 bar Rated voltage: 400 V Frequency: 50 Hz Rated motor current: 40 A Rcjdpfx Amey En Sfs Tsd Control voltage: 24 V DC Wiring diagram number: HMB6S131426-100 Rated current: 120 A Max. pre-fuse gL: 100 A Clamping force: 1,000 kN Clear tie bar spacing: 420 x 420 mm Screw diameter: 40 mm Shot volume: 251 cm³ Max. shot weight: 228 g Length: 4,650 mm Width: 1,450 mm Height: 2,050 mm Transport and loading can be arranged across Europe upon request, at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Gjbn N Ay Dowza Dxogoil Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell one? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2004, clamping force: 1,000 kN, clearance between the columns: 420 mm, displacement volume: 192 cm³, type of input current: DC, input frequency: 50 Hz, input current: 80 A, For sale: Battenfeld injection moulding machine, model HM 1000-750. The machine is in good condition and ready for immediate use. Technical data: Model / Type: HM 1000/750 Year of manufacture: 2004 Control system: Unilog B4 Total weight: 4,600 kg Hydraulic operating pressure: 240 bar Pneumatic operating pressure: 6 bar Rated voltage: 230/400 V Frequency: 50 Hz Rated motor current: 40 A Control voltage: 24 V DC Wiring diagram number: HM B4500028412 0 Max. main fuse: 80 A (1st power supply) / 50 A (2nd power supply) Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Maximum shot volume: approx. 192 cm³ Total input current: 63 A or 80 A Transport and loading can be organised Europe-wide upon request and at an additional cost. Prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange is possible! Machinery Trade / Purchase Rsdpfjy Enh Tex Am Tjcd BUYING & SELLING PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface Rcedoyglw Tepfx Am Tsd EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Rodoyglvpopfx Am Tecd Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x

Condition: excellent (used), Diameter Ø 700 x 25 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Rcjdpfx Amswz Nbmj Tod DE - 44143 Dortmund - Wambel

Condition: new, empty load weight: 1,135 kg, maximum load weight: 2,365 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,750 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 2.1 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: 2 years - Availability: IMMEDIATELY!!!! - Floor: FULLY MASSIVE STEEL FLOOR - Extremely robust - Gross vehicle weight: 3,500 kg - Unladen weight: 1,135 kg - Payload: 2,365 kg - Interior dimensions: 375 x 180 x 30 cm (L x W x H) - Overall exterior dimensions: 511 x 186 x 99 cm (L x W x H) - Loading sill height: 69 cm - Tires: 195/50R13 steel rim - Brake: yes - Support wheel: yes - Incl. vehicle documents (letter) standard. Vehicle documents (letter) Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Fully solid steel floor ? extremely robust - Very sturdy welded steel frame - Completely hot-dip galvanized frame - Many options. hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - pendulum flap at the rear - 8 lashing brackets recessed inside the side edge TÜV certified to 1000DaN / kg - lashing hooks welded to the bottom of the frame - automatic reverse drive - KNOTT overrun device and parking brake - sturdy eccentric locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights + large rear lights - large rear lights - large rear lights - large rear lights - large rear lights. Plug - Reversing light + large safety lighting - Integrated rear fog light, lighting recessed in rear frame - Automatic center support wheel - Solid 5-stage hydraulic cylinder Special equipment included in the price: - Electric operation 12 volt - Low chassis, tires 195/50R13, loading floor height : approx. 64cm - Parabolic suspension incl. shock absorber for 100km/h mounted instead of rubber-sprung axles. - Parabolic suspension axle with shock absorber for absolute driving comfort! - Drive-on package: 2 integrated aluminum drive-on rails, 2 crank supports, We are happy to offer you suitable financing! New vehicle with warranty and TÜV, descriptions and pictures are protected by copyright! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rjdpfxsu T Skqe Am Tscd

Condition: new, empty load weight: 770 kg, maximum load weight: 2,230 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable, * IMMEDIATELY AVAILABLE * incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable! Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available!!! - TÜV: 2 years - Floor: composite floor - Gross vehicle weight: 3,000 kg - Unladen weight: 770 kg - Payload: 2,230 kg - Interior dimensions: 335 x 180 x 30 cm (L x W x H) - Exterior dimensions: 468 x 186 x 99 cm (L x W x H) - Loading sill height: 69 cm - Tyres: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic 500 kg - Incl. Vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Sturdy welded steel frame - Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV-certified - Lashing hooks on the frame - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy eccentric locks - Reinforced, V-drawbar - 13-pin plug - reversing lights Plug - Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel incl. Special equipment: - Parabolic suspension incl. shock absorber for 100 km/h fitted instead of rubber-sprung axles. - Parabolic spring axle with shock absorber for absolute driving comfort! - Composite floor (honeycomb core plastic floor) Composite is made up of various layers of these fibers, like a kind of lasagne. These two materials create a sustainable, extremely stable and lightweight board. The core of the composite floor consists of a honeycomb structure with a top layer on both sides. The whole is fused together to create a stable unit. The manufacturer of the composite panels comes from the anti-ballistic industry. The top layer is therefore constructed like that of a bulletproof vest. At HAPERT Aanhangwagens, all innovations are thoroughly tested. This naturally also applies to the new composite floor. It has been thoroughly tested by us under normal conditions of use for impact and tensile strength, shear force, wear and resistance to weather conditions, among other things. Take a look at the load test: ?v=_gpat0vbiTc Accessories optionally available: - Emergency hand pump mounted with electric operation (at extra charge) - Drive-on package: 2x aluminum drive-on rails integrated reinforced - 2 rotating crank supports reinforced version - Car2Trailer charging system (permanent charging of the battery in the tipper via towing vehicle) - High grille at the front, 70cm - Tarpaulin + bows in various heights, - Supports, grille, grids, bows in various heights, - Tiltable cover + bows in various heights, - Support, grille, bows, bows, bows, bows, bows. Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Rcodsu Ht Nqepfx Am Tsd

Condition: new, empty load weight: 844 kg, maximum load weight: 2,656 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable, * IMMEDIATELY AVAILABLE * incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable! Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available!!! - TÜV: 2 years - Floor: composite floor - Gross vehicle weight: 3,500 kg - Unladen weight: 844 kg - Payload: 2,656 kg - Internal dimensions: 335 x 180 x 30 cm (L x W x H) - External dimensions: 468 x 186 x 99 cm - Loading sill height: 69 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic 500 kg - Incl. vehicle documents (letter) Vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Sturdy welded steel frame - Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV-certified - Lashing hooks on the frame - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy eccentric locks - Reinforced, V-drawbar - 13-pin plug - reversing lights Plug - Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel incl. Special equipment: - Parabolic suspension incl. shock absorber for 100 km/h fitted instead of rubber-sprung axles. - Parabolic spring axle with shock absorber for absolute driving comfort! - Composite floor (honeycomb core plastic floor) Composite is made up of various layers of these fibers, like a kind of lasagne. These two materials create a sustainable, extremely stable and lightweight board. The core of the composite floor consists of a honeycomb structure with a top layer on both sides. The whole is fused together to create a stable unit. The manufacturer of the composite panels comes from the anti-ballistic industry. The top layer is therefore constructed like that of a bulletproof vest. At HAPERT Aanhangwagens, all innovations are extensively tested. This naturally also applies to the new composite floor. It has been thoroughly tested by us under normal conditions of use for impact and tensile strength, shear force, wear and resistance to weather conditions, among other things. Take a look at the load test: ?v=_gpat0vbiTc Accessories optionally available: - Emergency hand pump mounted with electric operation (at extra charge) - Drive-on package: 2x aluminum drive-on rails integrated reinforced - 2 rotating crank supports reinforced version - Car2Trailer charging system (permanent charging of the battery in the tipper via towing vehicle) - High grille at the front, 70cm - Tarpaulin + bows in various heights, - Supports, grille, grids, bows in various heights, - Tiltable cover + bows in various heights, - Support, grille, bows, bows in various heights. Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are Brian James / Humbaur / Hapert / Unsinn / Redou Hr Nvspfx Am Tjcd

Condition: new, empty load weight: 1,048 kg, maximum load weight: 2,452 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, loading space volume: 2.5 m³, color: silver, construction height: 990 mm, working width: 2,060 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable, * IMMEDIATELY AVAILABLE * incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable! Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available!!! - TÜV: 2 years - Floor: composite floor - Gross vehicle weight: 3,500 kg - Unladen weight: 1,048 kg - Payload: 2,452 kg - Interior dimensions: 405 x 200 x 30 cm (L x W x H) - Exterior dimensions: 541 x 206 x 99 cm (L x W x H) - Loading sill height: 69 cm - Tyres: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic 500 kg - Incl. vehicle documents (letter) Vehicle documents (letter) - 100 km/h: yes Standard equipment: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall extension - Cargo net hooks on lower hinge sections - Sturdy eccentric locks - Composite floor is extensively tested, The honeycomb structure consists of glass fibers and polypropylene-coated thermoplastic composites - This is a high-tech composite material made of long glass fibers in a polypropylene (PP) matrix. - Sturdy, lightweight and wood-free, making it sustainable and recyclable - Conditions of use tested in detail for impact and tensile strength, shear force, wear and resistance to weather conditions, among other things. - Reinforced stable bolted V-drawbar - very stable welded steel frame - frame completely hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts continuously welded in - all cross and longitudinal beams lie on the floor - 8 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear for easier attachment of the loading ramps - Loading ramp shaft prepared - Solid 5-stage hydraulic cylinder - Electric hydraulic pump with battery (12V/90AH) in the box incl. cover - Detachable remote control for e-hydraulics with spiral cable and battery status display - External battery charging socket for optional 230V charger - Parabolic spring axle from KNOTT - Wheel shock absorbers for 100km/h fitted - Parabolic spring axle for absolute driving comfort! - Automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing lights - large-dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic jockey wheel in the middle incl. special equipment: - Parabolic suspension incl. shock absorber for 100 km/h fitted instead of rubber-sprung axles. - Parabolic spring axle with shock absorber for absolute driving comfort! - Composite floor (honeycomb core plastic floor) Composite is made up of various layers of these fibers, like a kind of lasagne. These two materials create a sustainable, extremely stable and lightweight panel. The core of the composite floor consists of a honeycomb structure with a top layer on both sides. The whole is fused together to create a stable unit. The manufacturer of the composite panels comes from the anti Redsu Ht Sfspfx Am Tocd

Condition: new, empty load weight: 824 kg, maximum load weight: 1,876 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.7 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse, hot-dip galvanizing, roof window, WITH UP TO 60 TILTING ANGLES + 5-stage cylinder, * IMMEDIATELY AVAILABLE * WITH UP TO 60 TILTING ANGLES + 5-stage cylinder! Technical data: - Type: New vehicle with 2 years MOT from first registration - Availability: Available immediately!!! - TÜV: 2 years - Floor: Multiplex screen printing covered with sheet steel - Gross vehicle weight: 2,700 kg - Unladen weight: 824 kg - Payload: 1,876 kg - Internal dimensions: 305 x 180 x 30 cm (L x W x H) - External dimensions: 438 x 180 x 30 cm (L x W x H) - Loading sill height: 69 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Sturdy welded steel frame - Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - 6 lashing brackets recessed inside the side edge (1000DaN/kg) certified by TÜV - lashing hooks on the frame - maintenance-free rubber spring axles from KNOTT - automatic reverse - KNOTT overrun device and parking brake - sturdy eccentric locks - reinforced, V-drawbar - 13-pin plug - Reversing lights Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in the rear frame - Automatic support wheel in the middle Special equipment included in the price : - E-hydraulics for tipping with battery - Emergency hand pump fitted for electric operation Optional accessories available: - High front grille, 70cm - Drive-on ramps - Rear supports - Tarpaulin + bows in various heights Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rjdpfx Aju N Nhnom Tscd

Condition: new, empty load weight: 1,062 kg, maximum load weight: 2,438 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,750 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 2.1 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: 2 years - Availability: IMMEDIATELY!!!! - Floor: FULLY MASSIVE STEEL FLOOR - Extremely robust - Gross vehicle weight: 3,500 kg - Unladen weight: 1,062 kg - Payload: 2,438 kg - Interior dimensions: 375 x 180 x 30 cm (L x W x H) - Overall exterior dimensions: 511 x 186 x 99 cm (L x W x H) - Loading sill height: 69 cm - Tires: 195/50R13 steel rim - Brakes: yes - Support wheel: yes - Incl. Vehicle documents (letter) Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Fully solid steel floor ? extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - pendulum flap at the rear - 8 lashing brackets recessed inside the side edge TÜV certified to 1000DaN / kg - lashing hooks welded to the bottom of the frame - automatic reverse drive - KNOTT overrun device and parking brake - sturdy eccentric locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights + large rear lights - large rear lights + large rear lights. Plug - Reversing light + large safety lighting - Integrated rear fog light, lighting recessed in rear frame - Automatic center support wheel - Solid 5-stage hydraulic cylinder Special equipment included in the price: - Electric operation 12 volt - Low chassis, tires 195/50R13, loading floor height : approx. 64cm - Parabolic suspension incl. shock absorber for 100km/h mounted instead of rubber-sprung axles. - Parabolic spring axle with shock absorber for absolute driving comfort! We are happy to offer you suitable financing! New vehicle with warranty and TÜV, descriptions and pictures are protected by copyright! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Redpfeu Skydox Am Tocd

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. Rcsdezb I Iwjpfx Am Tod - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: used, Year of construction: 1994, Used Case Erector Ape 1994 Redevgupuepfx Am Tecd The Used Case Erector Ape 1994 is a machine manufactured by APE Impianti. Its model number is Form 1200 HM and it was made in 1994. Currently, it is in storage. The machine has safety features and comes with manuals.

Condition: used, Year of construction: 1997, Used Case Erector Ape 1997 Case Erector with hot glue closure under part model form 2000 hm-sx manufacturer APE. Rcjdpfevgumasx Am Ted Nordson glue heater Possibility of forming and closing various carton formats Painted iron frame with stainless steel panels Accident prevention protections Production about 2,000 cartons per hour The machine is in accordance with CE year 1997 with manuals Used until December 2021 see video

Condition: used, Year of construction: 2012, Used Hot Melt Labeling Machine Kosme 20000 bph The velocity of this machine reaches max 20,000 bottles per hour (BPH). Kosme works primarily with PET containers, a material extensively used in the beverage industry. The 16 plates have a movement controlled by a mechanical cam system with brake and clutch. This system ensures precision during labeling operations. The single labeling station operates in a clockwise rotation direction. Type of hot melt system: From the label application perspective, the labeler uses a hot glue method. This method, although traditional, provides durable adhesion between the label and the container. The Kosme labeler has an Adjustment system related to the different labels manual but has the head adjustments through an electrical system. Technical specification of the Used Hot Melt Labeling Machine Kosme 20000 BPH: Other technical specifics include the working diameter, set at 720, with a bottle diameter format of 78 mm, ideal for labeling round bottles. The double auger at the input is a feature that points to the efficiency of the bottle-feeding system. Despite its production year, the machine is currently in storage, suggesting limited use or optimal conservation. Its total weight is 2500 kg, and, from an electrical standpoint, it operates at 400V, with a power of 9kW and a frequency of 50Hz. The Kosme labeler has the necessary safety features; it is in compliance with current regulations. The usage and maintenance manuals are available, providing further operational details and maintenance techniques. In summary, with its technical specifications and operational features, the Kosme 20000 BPH hot melt labeler represents an important asset for those operating in the bottling industry and in need of reliable and precise solutions. Technical assistance: We can give technical assistance for installing and running this equipment, an offer can be released upon request. Rsdpfovguc Iox Am Tecd

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 Rcedpfxoiz Tzxe Am Tjd S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Condition: used, power: 1 kW (1.36 HP), Year of construction: 2025, operating hours: 1 h, Empty weight: 361 kg Please contact Emal Jaweed for more information Rcsdpfox R Tyrsx Am Tjd

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Redpfowk Nldex Am Tocd