Used Line Defrosting Transformer for sale (9,992)

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data Manufacturer: ATS Wibbing GmbH Machine Type: Fully automatic KEG cleaning and filling line Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system Year of Manufacture: 2025 Availability: approx. 2-3 months Capacity: approx. 30 – 35 KEG/h Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm Control System: Siemens S7-1500 HMI: Touchpanel with operator guidance External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet Expansion vessel 150 l Pallet handling aid Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C Warranty: 2 years manufacturer warranty Nljdpfx Aey Rk Igshzob

Condition: ready for operation (used), Year of construction: 2003, operating hours: 92,000 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. Nodpfx Aheylw Dcszslb • C-axis on main and counter spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in control cabinet • Transmit-/Tracyl function • MDE interface (machine on, machine running, parts counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming system • Control cabinet cooling unit • Main spindle D65 • Counter spindle D60 • Coolant flushing of counter spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) bottom and top • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Portal unloading device with actuated gripper, NC-controlled • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion use) • High-pressure pump 80 bar • Workholding: • Collet chucks for draw tube, HAINBUCH (main and counter spindle) • Power chucks D210 with quick jaw change, Schunk (main and counter spindle) • Stop device • Optional: large number of powered tool holders and spare parts warehouse

Condition: used, Make by : Tsuruta Electric : TBX-25K (06017) Nlsdedc A Rropfx Ahzob

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg Njdpevvvrpefx Ahzolb dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm Nledpfx Aheu Ibuwozob *

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Nledpfx Aou Nu I Tehzsb Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Condition: used, Year of construction: 2004, Technical details: current capacity: 630 kVA Voltage primary: 20 kV Voltage secundary: 400 V frequency: 50 Hz voltage: 400 V / Hz rated current: 18,2/24,2 A weight: 2,6 pro Gerät t dimensions L x W x H: 1,7 x 0,82 x 1,66 m This isn't a medium voltage plant! Protection class IP 00 Cooling type AN insulation class F - F with interior insulation Winding material Al / Al Ambient temperature = 40° C Application Rated voltage: 1. 21.000 V 2. 20.500 V 3. 20.000 V 4. 19.500 V 5. 19.000 V Nodpfx Aov Szwcshzolb *

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Nljdou Tp N Dspfx Ahzsb Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ Nledpfxsy Spl Hs Ahzsb - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, mileage: 55,315 km, power: 210 kW (285.52 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2022, next inspection (TÜV): 01/2025, color: beige, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Mileage varies, vehicle is still in use----Special equipment: Roof rails, Black Style Design Package, Plus Driver Assistance Package, fire extinguisher, head-up display, Innovision Cockpit (digital instruments and operation via touchscreen color display), Climatronic 4-zone air conditioning, Comfort Package Keyless Access, Savona leather package and ErgoComfort front seats, LM wheels 9.5x21 (Suzuka, black), electronically controlled air suspension with adaptive roll stabilization, Matrix LED headlights (high-tech), Premium Memory Package, Mobile Online Services Car-Net, front panoramic sliding/tilting sunroof electric, with rear panoramic roof, smoker's package, tire pressure monitoring system (regular and winter tires), laminated glass side and rear windows, rear tinted, front seats with climate and massage function, special paint Sechura Beige Metallic, sunshade blinds on rear door windows, auxiliary heater with auxiliary ventilation (remote control and timer), variable load floor, additional winter tires (customer specification required) Other equipment: Cornering and all-weather lights / bad weather lights, driver/passenger airbag, deactivatable passenger airbag, white ambient lighting, Discover Premium audio navigation system (with hard drive storage), R-Line equipment, automatic headlight control (ALS) with leaving home/coming home light function, exterior mirrors electrically adjustable, heated and foldable, roof lining fabric, black, double sun visors with mirrors (illuminated), double-tone horn, assistance system: automatic distance control (ACC incl. stop & go function), assistance system: driving profile selection, assistance system: high beam control (Light Assist), assistance system: pedestrian recognition, assistance system: fatigue detection sensor, assistance system: park assist (Park Assist), assistance system: lane keeping assist (Lane Assist), assistance system: environment monitoring system (Front Assist) with city emergency braking function, assistance system: traffic sign recognition, electric windows front and rear, front camera (multifunction camera windshield), laminated glass windshield tinted, textile floor mats, vehicle without hybrid, enlarged urea tank (AdBlue), interior trim: aluminum wave inserts, interior filter: dust and pollen filter with activated carbon filter, Isofix mounts for child seats in rear seats (incl. i-Size child seats), body: 5-door, front and rear head airbag system incl. front side airbag, loading edge protection (stainless steel), speakers (8), lumbar supports front, electrically adjustable, heated steering wheel (leather, R-Line) with multifunction and shift function, rear center armrest, engine 3.0 liters - 210 kW V6 TDI, rear fog light, emergency call system, electric parking brake, stainless steel pedals, R-Line, R-Line package, radio reception digital (DAB+), wheelbase 2904 mm, tire repair kit, tire pressure display, rear view camera (Rear View), rear seat split/foldable and slidable, low-emission according to Euro 6d emission standard, heated washer nozzles, SCR system (AdBlue technology), front side airbag, rear outer seat belts with belt tensioners, front seat belts with belt tensioners, height adjustable, front seats electrically adjustable, front ErgoComfort seats, front seats height adjustable, front seat heating, differential lock, start/stop system, R-Line bumpers, lower door trim in body color, exterior door handles in body color, first-aid kit and warning triangle, seat Nlsdpfxevht Tns Ahzeb

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station Nsdpfx Ahjx Dkk Sszelb - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2013, 10 MVA cast resin transformer, 10500 V +- 2x2.5 % / 6000 V, Yy0, year 2013 Njdpjtwwm Ujfx Ahzslb

Condition: used, Pfaudler glass lined vertical reactor manufactured by Pfaudler, model BE6300. Volume: Total approximate capacity: 8190 L Technical features: Model: BE6300 Vessel working pressure: -1/+6 bar Vessel working temperature: -25/+120 ºC Half-coil/jacket working pressure: -1/+6 bar Half-coil/jacket working temperature: -25/+120 ºC Half-coil/jacket volume: 796 L Nlsdoyxd D Rjpfx Ahzob Equipment configuration: -Agitator -Half-coil Specifications: Internal pressure: 87 PSI Material of Construction: glass lined

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system Nlodpfxoif Sg Ss Ahzjb - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Nledewuz Rtjpfx Ahzob Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 undefinedPosition 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: used, machine/vehicle number: 007857, Position 1: Horizontal Storage Systems IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 2: Beam panel saws with automatic warehouse IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 3: Single Edgebanders IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 4: Panel Feeding and Loading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 5: Panel Stacking and Offloading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 6: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 7: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Nlodpfx Ajwuuf Dohzsb Position 8: Cardboard Cutters IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 9: Strapping machine IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Condition: used, FDM/Piovan Batch supply for extrusion line Comprising Vacuum conveyor hoppers for supply of masterbatch HDPE, masterbatch black, regrind, adhesion promoter, barrier layer EVOH Vacuum pumps are not included 400V/50Hz; 35A Please note the items in this lot 29381-79 are simultaneously offered in the combination lot 29381-35 as a complete cell. The separate parts of the complete cell 29381-35 are offered as individual lots 29381-41, -48, -49, -51, -58, -66, -67, -70, -72, -74, -79, -82, -83, -84, -89, -92, -93, -95, -96, -100, -101, -103, -106, -110, -112, -113, -115, -116, -118, -121 Bidders can bid on the complete cell and/or on individual lots. Sales are conditional and subject to seller approval. Nlsdpfxjy Ulq Rj Ahzeb It is likely that the seller will approve the highest aggregate bid for the cell either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Year of construction: 2014, condition: used, Cannon/Breyer Combined extrusion thermoforming line (2014) for producing of continuous 6-layer PE plate to thermoform automotive tanks 1500x1600mm max. plate size 500 x 500mm min. plate size to be processed 10mm max. plate thickness 4,0mm min. plate thickness 24kg approx. max. plate weight (at 1600x1500x10 mm) 700mm approx. processing height 1.100 to 1.170 kg/h max. capacity - approx. 27 tanks per hour Comprising: Breyer Extrusion Line composed of Nlodpfx Asy Uligehzjb - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling PLEASE NOTE: Tooling/moulds and any product related gripping tools are not included! Combination Lotting: The complete Line CET 1 is lotted as a single combination Lot 29381-36 Its components are simultaneously offered as individual Lots 29381-39, -40, -42, -45, -46, -47, -50, -53, -55, -59, -62, -64, -71, -75, -77, -78, -81, -85, -86, -87, -88, -91, -94, -97, -98, -104, -108, -111, -114, -120 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: used, Year of construction: 2020, material thickness 0,5-50 mm material width 1500 mm feed 4 m/min Operating hours 900 h The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Nsdpfx Asy S Diaohzjlb Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 1 x Comcount Packaging Systems bowl feeder and 1 x GIC Gainsborough VFFS bagger with 1 x outfeed conveyor. Model of Comcount bowl feeder - BFWT. Serial no. - WO1221. Date of manufacture – 2019. Weighing range - 150g-500g. GIC Gainsborough Engineering model - VFB2000. Serial no. - 960231. Date of manufacture – 2008. Sealing bars - 290mm horizontal & 320mm vertical. Reel width - 620mm. Nljdpfx Aey Hlw Iehzsb Current film - 280mm. Forming tube - 80mm diameter. Outfeed conveyor - IC350. Belt width - 295mm. Outfeed height - 910mm high. Overall footprint - 4.3m long x 3.45m wide x 3.1m high. Condition – Very good. Only been used 5-6 times in 2.5 years.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021202. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Nlodpfsy Hlkbjx Ahzeb Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: new, Allen Bradley 2706-B22J31 DL20 2-line Message Display , 31k Memory, unused in opened original box, 100% functional Nlodpfxji D Tzho Ahzob

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), very good condition, 100% functional Nsdpfei Eblaex Ahzjlb

Condition: used, machine/vehicle number: 008597, Position 1: Automatic Loading Panel Saws SCHELLING-VS 12 - FH6 - FH4 Position 2: Front-Loading Panel Saws SCHELLING-VS 12 - FH6 - FH4 Position 3: Automated Warehouse SCHELLING-VS 12 - FH6 - FH4 Nledpjy Stvpefx Ahzjb

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: Nlodpfeu Tg Nnjx Ahzeb The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.