Used Locker Sieve for sale (419)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading Podpfx Aaji Riwuezjgt EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Pgodex Rq Slopfx Aazet Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: refurbished (used), Year of construction: 2010, operating hours: 34,616 h, functionality: fully functional, machine/vehicle number: 1244801, overall weight: 13,500 kg, rotor diameter: 500 mm, number of blades: 125, rotor length: 1,800 mm, type of input current: AC, sieve perforation: 30 mm, VECOPLAN Type VAZ 1800F shredder, after complete renovation, ready to work. The machine is fully functional, the following parts have been replaced: cutting system (knife bases, knives, counter knives, rotor surfacing), vibration isolators, sliding strips, sieve, oils in gears, electrical, hydraulic and pneumatic installations. Pgjdpfevx Rtaex Aazot

Condition: used, Machine ready for operation, throughput 2000 kg/hour. Comes with three types of sieves, the machine is equipped with a pre-crusher for frozen products. Designed for frozen fruit: black currant, red currant, gooseberry, plum. Please see my other listings. Psdsy Imymspfx Aazegt

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Angle feed wolf Laska WW 130 G Model WW 130 G Throat diameter: 130 mm Power supply: 400V 50Hz Power: 17 kW Year of production 1998 Set of knives and sieves Pgsdpfx Aasvz H Rmjzot

Condition: new, Knife grinder Motor: 2.2 kW / 2800 rpm, 220V, Capacity: 400-800 kg/h for fruit, 40-200 kg/h for dry material Screens: 4 pieces, according to request. Purpose of the machine: Pre-chopping and grinding. Suitable for grinding the following products: - Grains: wheat, corn, peas, pepper, caraway. - Pressed seeds: sunflower cake, soybean meal, pumpkin seed cake, linseed cake, poppy seed cake, etc. - Raw fruits and vegetables: pepper, plum, apricot, apple, quince, pear. - Dried fruits and vegetables: pepper, onion, garlic, raspberry, blackberry, apple, sour cherry, etc. Main components of the machine: - Frame - Safety switch - Motor 380V or 220V - Housing Pgedpfx Ajxvxbcoazjt - Hopper - Sieve - Knives - Dosing regulator Available in stainless steel version.

Condition: good (used), Year of construction: 2016, CARBOMA single-shaft shredder Pjdpfxowny Rfs Aazsgt A device used for final shredding of plastics, mixed municipal waste, electrical wires, electronics, rubber, glass, ceramics, paper, cardboard, wood, etc. Manufacturer: CARBOMA (currently ICT S.A. Wyry) Model: PURSAN RK 2000 Year of production: 2016 Max power: 160 kW Total weight: 15,000 kg Rotor diameter: 600 mm Rotor length: 2000 mm Working shaft speed: 80-200 rpm Number of knives: 156 pcs Sieve thickness: 12 mm Sieve hole diameter: 30 mm Efficiency: up to 12 tons (depending on the type of shredded material) Technical condition: used, functional

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 1,020 mm, total width: 740 mm, ESC ATMACE 710/G: Max print format: 720x1020 Max substrate format: 740x1020 Min. substrate format: 330x480 Max size of the screen printing frame: 1140x1280 Squeegee angle adjustment range: 30 degrees Fit adjustment range: /-10 Manual feed - ¾ auto Max speed - depends on the substrate: 500 sheets/h Power consumption: approx. 3.9 kW Dimensions: length/width/height 2700x2500x1500 year of manufacture 2012 UV TUNNEL EPS SUV 800: Max sheet format: 1050x780 Max stack height: 860 Max conveyor speed: 45m/min. Max power consumption: 14.3 kW Weight: 550 kg Dimensions: length/width/height 4300x1680x1380 year of manufacture 2012 The set additionally: - Station for washing sieves, Pgodpownbbxofx Aazet - grinder for sharpeni...

Condition: like new (used), Year of construction: 2019, functionality: fully functional, control type: PLC-controlled, Auction of a medicinal and spice processing line. The line is still in its original packaging and has never been used. The video shows a sample machine. The offered line consists of the following components: - ST II VIBRO W - LGU 252 - VIBRO 14 - OGK 1003-A - DOUBLE ZIG-ZAG Control system: PLC-controlled Processing capacity: 20 plants in 5–6 fractions ST II VIBRO W TECHNICAL DETAILS - Sieve length: 1,200 mm - Sieve width: 800 mm - Number of sieves: 2 - Sieve inclination: continuously adjustable from min. 5° to max. 10° - Screen perforation: according to customer requirements MACHINE DETAILS Drive - Type of drive: vibratory motors - Motor power: 2 × 0.18 kW - Motor power: 2 × 0.60 kW Machine weight: approx. 480 kg LGU 252 TECHNICAL DETAILS - Number of sieves: 2 - Sieve size: 2,500 × 800 mm - Sieve perforation: "Peterson" - Inclination adjustment: continuously from min. 20° to max. 40° - Conveyor belt with cleats: 600 mm MACHINE DETAILS - Dimensions (W × L × H): 5,000 × 1,700 × 3,000 mm Drive - Motor power: 0.75 kW - Motor power: 1.5 kW - Motor power: 1.1 kW - Motor power: 2 × 0.55 kW - Operating voltage: 380 V Pjdpfx Aaox Nnawezsgt OGK 1003-A TECHNICAL DETAILS - Number of sieves: 1 - Number of blades: 2 - Throughput: min. 40 kg/h to max. 100 kg/h MACHINE DETAILS - Dimensions & weight - Dimensions (W × L × H): 2,440 × 1,914 × 2,525 mm - Machine weight: approx. 970 kg - Motor power: 1.1 kW - Operating voltage: 380 V DOUBLE ZIG-ZAG TECHNICAL DETAILS - Throughput: max. 150 kg/h MACHINE DETAILS - Dimensions (L × W × H): 2,400 × 2,000 × 5,000 mm - Exhaust fan: 1 GENERAL EQUIPMENT - Control 208 - PLC - Aspirator I-6 - Control 308 - Belt conveyors (12 units) - Air technology - Magnets - Speed controllers Note: The machine has been dismantled and is in storage (see photos).

Condition: new, Year of construction: 2026, 🏭 POWDER COATING BOOTH KPP Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Pgodpfx Aaefy T Tbozst Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Condition: new, Year of construction: 2020, 🏭 POWDER COATING BOOTH KPO-3 Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Pgsdpfoflk Akjx Aazot Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2026, condition: new, The fruit washer mill is made from stainless steel. Firstly, the operator of machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 1000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. It facilitates the process of pouring the products into the basin. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - The speed of the belt conveyor is adjustable in the control panel. - Optional replaceable cutting graters/sieves are available for different fruits and berries. Psdpfx Aeflpfboazsgt - The mill does not damage the fruit seed. - Machine is easy to clean after using. - Powerful 2.2 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our belt press is ~75 %. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500. Pgedpfxoflpnyj Aazjt

Year of construction: 2026, condition: new, The machine is suitable for stoning of stone fruit. The chopped fruit can be delivered to a container, a pasteurizer, a jam extractor, suitable for use with a screw pump or collector handle with manual force. Specifications: - Performance: 1-5000 kg/h - Electric demands: 5,5 kW, 400 V, 16 A, monophase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 860x1820x1350 mm - Weight: 190 kg - IP65 certified electronics - Tiltable work surface, adjustable height Easy to clean, with massive food industrial conveyor belt, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. It requires minimal maintenance. Available options: Ribbed texture belt: it helps to prevent the fruits rolling down in case of working on an angled surface. With feed screw in the input hopper. With 2 pcs rotating, 2 pcs fix wheels, or 4 pcs vibration-free feet. It requires minimal maintenance. Sieves can be changed easily and quickly. One choosable diameter sieve is inclusive in the list price Available options: Pjdpfx Aaefd Iixezsgt - Inverter: speed control for the rotor Sieves: - 0,8 mm diameter sieve: berries, pulps - 1,5 mm diameter sieve: berries, pulps - 3 mm diameter sieve: apple, pear mash - 5 mm diameter sieve: cherry - 8 mm diameter sieve: plum, apricots - 10 mm diameter sieve: peach, mango - Custom diameter sieve

Year of construction: 2026, condition: new, CM 10. 750 KG / HOUR CAPACITY. CAPACITY IS GIVEN FOR 4 MM SIEVE. OUR LOCATION KONYA TURKEY BÜSAN SANAYİ. CRUSHER MOTOR: 37.5 KW. TOTAL WEIGHT 2.5 TONS. MAGNETIC DISCHARGE BELT, PLASTIC SPIRAL, Pedsu Dxngopfx Aazegt DUST CYCLONE. COVERS APPROXIMATELY 20 M2 SPACE.

Condition: excellent (used), The device is in good working order and ready for use. It comes with a set of sieves with the following sizes: 6 mm, 9 mm, 15 mm, 25 mm, 35 mm. Year of manufacture: 2015. Working width: 140 mm. Electrical power: 5.5 kW. The device has three sorting levels; the fruits that were sorted include: strawberries, cherries, and currants. Pgjdpszhfuaefx Aazot Please check out my other listings.

Condition: reconditioned (used), Manufacturer: Provisur / Beehive Model: RSDD-04 Type: Separator Dimensions: 2150 x 700 x 1650 mm Power: 21 kW Power supply: 400V 50Hz 3N Sieve hole diameter: 1 mm Material: Acid-resistant stainless steel Machine renovated and ready to work. Pgodpfxjy Akhdo Aazot

Condition: new, color: other, Field of application: Mining We produce, mobile, primary, primary - secondary or tertiary, impact - crushers. On a trailer, with a hopper, belts, grizzly or wooble feeder, to separate clay and earth from the rock. It can also be a combination of crushers + screen, sieve, with two, three or four deck_ DRY PROCEDURE or WET PROCEDURE. The final products are tampons: 0-30 mm, 0-60 mm or 0-100 mm or asphalt-construction fractions; 0/4, 4/8, 8/11, 11/16, 8, / 16, 16/22, 16/32 mm. The plant is used for work in soft and medium hard rock. Technology has advanced, today they can crush impact crushers even in difficult working conditions. On a tertiary impact crusher in difficult working conditions, the impact hammers can be pre-shredded up to 40,000 m3 of gravel or eruptive stone. The power supply of the plant is via a cable, from a transformer station or via a generator. The size of the plant will depend on the project inquiry . ----- ----- ----- Mining crushing plants are offered, on a trailer; jaw crushers, cone crushers, vertical crushers, all types of separations, DRY PROCEDURE and WET PROCEDURE, with washing. ----- ----- ----- The warranty on the plants is 2 years. We provide service, all spare parts. ----- We offer all technical support on the issue of how correct and economically justified work out some quarry !! Many years of professional experience in surface exploitation in quarries, open pit, of mineral resources. Pgjdpfsx D Dcbjx Aazet

Condition: new, Year of construction: 2027, TALC POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Powdering unit : L450 W450 H1500mm Filtration unit : L750 W750 H1825mm Both units are connected to each other with Ø80mm air hose and clamp system CABLE PASSAGE Size : 100 mm diameter Height from ground : Manually adjustable, from 1.000 mm to 1100mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application • Cable passage height from the ground adjustable, according to your extrusion line Pjdpsvxfg Iofx Aazegt • Coating and filtration unit can be combined or separately

Year of construction: 2026, condition: new, The PT-400 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Podpfx Aefgl Hfsazegt Technical data: Capacity: up to 500 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 0.8 kW, 230 V Dimensions L × W × H (mm): 1940 × 1000 × 1250 Weight: 500 kg Belt width: 400 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Condition: good (used), Robot Coupe C80 Automatic sieve Stainless, output 60Kg per hour, comes with 1mm perforated basket, tabletop, 1Ph Pgjdpfez Dxlnox Aazjt

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Pgsdozvlk Dspfx Aazet Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph

Condition: good (used), Russell Finex 17240 Vibratory sieve Stainless compact vibratory sieve, 550mm mesh diameter, with magnetic separator, mobile, 3Ph Pjdpfoz At Hmjx Aazegt

Condition: good (used), NNP Flavouring drum Pjdjzt Ic Dopfx Aazjgt Stainless flavouring drum / rotary sieve mounted on stainless stand, overall length 1600mm, diameter drum 600mm, 3Ph

Year of construction: 2015, condition: excellent (used), Sieve in almost new condition. Direct from small powder factory. Pgodpfxew R Eb Tj Aazet