Used Müller Opladen Ph-Dt250 for sale (2,657)

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Fsdst N Antepfx Adcjph Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Fpodpfx Aeyw Hwdodcjh Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ Fpedpfey Spl Hox Adcsh - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Fedpfex Dzn Ujx Adcsph

Condition: used, empty load weight: 9,300 kg, maximum load weight: 14,700 kg, first registration: 02/2001, next inspection (TÜV): 10/2024, total width: 25,500 mm, suspension: steel, tire size: 235 / 75 R 17.5 / 10mm, front tire size: 235 / 75 R 17.5 / 10mm, operation weight: 24,000 kg,

Condition: used, maximum load weight: 23,900 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2007, Year of construction: 2007, Internal vehicle number: G400178 German vehicle Available immediately at our location in Kaufungen - Kassel, Germany. For more information, please contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 7,100 kg Overall length: 10,800 mm Maximum permissible weight: 31,000 kg Errors and omissions excepted. We would be happy to accept your used vehicle as part payment. Financing is available directly with us. Fedpfx Aozahg Dedcjph GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, machine/vehicle number: 39500, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/1995, tire size: 235/75 r17,5 zwilling, color: orange, Further information Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation! 24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate Fedpfx Adji Rixgscjph Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished

Condition: used, empty load weight: 7,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 07/2006, loading space length: 9,100 mm, loading space width: 2,750 mm, suspension: air, tire size: 235/75 R17,5, color: grey, Equipment: ABS, Drum brake Payload 22,200 kg Rubber floor Hydraulic double ramps and hydraulic lateral shift Gigant axles Fpjdpfx Aewh Rwvjdcsh Subject to errors and omissions.

Condition: used, overall weight: 34,000 kg, first registration: 07/2010, - Low-bed trailer, galvanized - Ramps with mechanical suspension Fpjdjzbzbdepfx Adcjh - Forced steering on the rear axle - 900 mm loading height - 8700 kg unladen weight - In top condition

Condition: ready for operation (used), Year of construction: 2000, Müller Martini Amyrs/Prima Year 2000, 8 stations, 1 cover feeder, stitching, three-knife trimming, stacker Fpjdpfey Siprex Adcsh Production capacity: 14,000 units/hour Min. format: 90 x 105 mm Max. format: 320 x 480 mm

Year of construction: 2000, condition: good (used), 6 Station: 3 Automatic Feeders (3 x double feeders 1551) 1 Cover Folder Feeder 1 Three Knife Trimmer Müller Martini Typ 1522 Stitching Unit Typ 1550 Belt Delivery 6 x Station: 3 Automatic Feeders (3 x double feeders 1551) 1 x Cover Feeder Typ 1528 1 x Three Knife Trimmer Müller Martini Typ 1522 Stitching Unit Typ 1550 1 x Müller Martini Pratico Stacker 2 x Handfeeder Speed : 9.000 Cycles / Hour Largest Sheet Size X : 365 mm Largest Sheet Size Y : 305 mm Min. Sheet Size X : 115 mm Fpjdpfx Adefh It Uscjh Min. Sheet Size Y : 105 mm

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min Fpodpfjv Az T Sox Adcoh table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3850 kg dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - new braeke plate - current press inspection

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 120 l, inner dimension width: 400 mm, inner dimension length: 930 mm, Müller Mechanik - Vibratory finishing technology MADE IN GERMANY - Our trough vibrators replace manual deburring and grinding processes. Avoid time-consuming and cost-intensive manual work in the future! With the trough vibrators from Müller Mechanik you achieve reproducible machining results of high quality. MMTV-9341 - Technical data : - Useful volume : 120 dm3 - Trough inner dimensions: 930 x 410 x 510 mm - Wear coating: Polyurethane, 18 - 20 mm - Maximum payload: 400 kg - Empty weight: approx. 490 kg - Operating voltage: 3N ~ 50 Hz 400 / 230 V - Connected load: 1,5 KW - Nominal motor speed: 1,500 min-1 Fodpfx Aefid Tcsdcoph - Speed control infinitely variable via frequency converter

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 20 l, inner dimension width: 200 mm, inner dimension length: 520 mm, Müller Mechanics - Vibratory finishing technology MADE IN GERMANY - Fjdpfxjfid Sqs Adcjph Our trough vibrators replace manual deburring and grinding processes. Avoid time-consuming and cost-intensive manual work in the future! With the trough vibrators from Müller Mechanik you achieve reproducible machining results of high quality. MMTV-5321 - Technical data : - useful volume 20 dm³ - max. payload 80Kg - Engine speed 1500 min-1 - Polyurethane wear coating, seamlessly cast, wall thickness 10-12mm - Operating voltage 3N ~ 50Hz 400/230V, connected load 0.25KW - Empty weight approx. 68 Kg - Process control, switching range 1min - 99h 59min - Dosing pump control, switching output 230 V ~ 50Hz max. 2A

Condition: good (used), Manufacturer: MÜLLER MARTINI, year of manufacture: 1994, serial number: 94.00398.01 Fpsdpjy Ez Umsfx Adcjh

Condition: used, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2008, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, German trailer, * 30-ton capacity * Extendable to 3 meters wide * Spring-loaded ramps * 50mm drawbar eye * Air suspension Fedpfxjy Trnto Adcsph For further information, please call Christian Bredemeier.

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm Fodovuucqopfx Adcsph stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm Fodpovuuh Tefx Adcsph stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Fpjdpfxovuuhgo Adcoh Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, maximum load weight: 31,820 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 01/1980, loading space length: 9,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 900 mm, Year of construction: 1980, Equipment: ABS, tail-lift, Müller-Mitteltal T4 Low-bed Trailer * SAF axles with drum brakes * Twin tires * Low-bed with extendable loading platform * Hydraulic loading ramps, adjustable (2 units) * Drive-on gooseneck * Additional rear supports * Turntable design ---Dimensions & Loading Platform--- * Loading platform approx. 9,800 mm * Loading platform width: 2,550 - 3,000 mm * Loading platform height: 900 mm --- * Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tires: 235/75R17.5 ---Vehicle number: 11892---Errors and prior sale excepted---Advertising and various lettering have been digitally removed. ---We are happy to assist you with all the formalities involved in purchasing a vehicle; simply inform us of your requirements and suggestions, and we will handle the rest. Among other things, we can offer the following services for an additional fee: Fpodpfx Adsy Skl Iscsh - Trade-in of your old vehicle - Main inspection (TÜV/SP) - Complete export handling - Financing mediation - Application for export license plates - Vehicle transportation - Vehicle registration - Recovery and vehicle transport ---Your VTS Team

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm Fpsdpfxoyx Impj Adcoh return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line Fpjdpsv Hqnajfx Adceh KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: ready for operation (used), Otto Müller SR 30 High-speed radial drill Drill spindle holder (Morse): 40 mm Longitudinal displacement drill head (X-axis): 750 mm Arm travel height (Y-axis): 450 mm Spindle diameter: 70 mm Max drilling depth: 150 mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer to the left of the machine in the picture Transport possible at more price. Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 30 Fast Radial Drill Drill spindle mount (morse): 40mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 450mm Spindle diameter: 70mm Max drilling depth: 150mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer on the left of the machine in the photo Transport possible at an additional cost. Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 30 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 40mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 450 mm Spindle diameter: 70 mm Maximum drilling depth: 150 mm Speed: 2400 U/min Abmessungen: 175x120x235cm (LxWxH) Power supply: 380 V Ohne Ölskimmer links neben der Maschine im foto Transport gegen Aufpreis möglich. Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Fodpfsvilzgox Adcoph

Condition: ready for operation (used), Otto Müller SR 23 Fast Radial drill press Drill spindle adaption (morse): 30 mm Longitudinal displacement drill head (X-axis): 750 mm Arm stroke (Y-axis): 350 mm Spindle diameter: 55 mm Max drilling depth: 125 mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new controls, ready to put to work. Transport possible at more price. Fpodpfx Ajvilzmodceh See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 23 Fast Radial Drill Drill spindle mount (morse): 30mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 350mm Spindle diameter: 55mm Max drilling depth: 125mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new control, ready to put to work. Transport possible at an additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 23 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 30mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 350 mm Spindle diameter: 55 mm Maximum drilling depth: 125 mm Speed: 2400 U/min Abmessungen: 175x130x215cm (LxWxH) Power supply: 380 V Völlig neue Steuerung, sofort einsatzbereit. Transport gegen Aufpreis möglich. Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: used, Year of construction: 2000, machine/vehicle number: 510565, functionality: fully functional, operating hours: 5,840 h, Offered for sale is an eccentric press. Fpedpfx Aoxvqnbjdcoh Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee.