Used Masterfinisch Ks 50 for sale (35,235)

Condition: used, Year of construction: 2011, Fully functional Pjdpfxozd Tlro Aknsgr

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. Pedpfexu Dipex Aknsgr - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm Pgsdsztalqopfx Aknor - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Pgjdpfsff Ed Tox Aknjr Oscillation stroke 20 mm Availability: Short-term

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Podpfx Asv Sk Nnoknogr Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: excellent (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, trolley, monorail trolley, pantograph trolley, cable trolley -Manufacturer: Stemmann, pantograph car -Type: K70/KSL 25A 500V -Item No.: Dimensions: see photos -Quantity: 1x pantograph car available Podpfx Ajzhug Soknsgr -Dimensions: 150/50/H130 mm -Weight: 0.3 kg

Condition: good (used), Transformer, single phase power transformer, single phase transformer, single phase isolation transformer, single phase isolation transformer, isolation transformer, solid rubber distributor -Manufacturer: ismet, single-phase isolation transformer type KSTK 2500 -Power: 2500 VA Pgedpfjqy Rk Nox Aknsr -Technical data: see photo nameplate -Dimensions: 315/270/H275 mm -Weight: 29 kg

Condition: good (used), Aluminum circular saw, miter saw, glass strip saw, aluminum miter saw, metal miter saw, compound miter saw -Processing: of flat, angle and solid materials, pipes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm Psdpfxeb A Sgwj Aknjgr -Weight: 260 kg

Condition: used, Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 2 pieces collet holder -Type: Autolock Pjdpfx Aogkw Hueknegr -Adjustment: SK50 -Tension sleeves: Ø 25/16 mm -Cutter: Ø 44/11.5 -Price: complete -Dimension total. 175/285/100 mm -Total weight: 9.2 kg

Condition: used, Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm Pedpfegkw N Nex Aknsgr -Total weight: 14 kg

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential Pgjdezh Iz Ajpfx Aknjr - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 131 720, total height: 4,120 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 2,600 mm, total length: 3,600 mm, drop-through hole in table: 1,200 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 160 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 650 mm, distance between stands: 1,600 mm, overall weight: 35,000 kg, control voltage: 24 V, input frequency: 50 Hz, ATTENTION: The machine is currently partially disassembled. The control panel and switch cabinet have been scrapped. Components can be inspected. Before delivery in 2026/2027, the machine will undergo a complete mechanical and electrical overhaul. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Pedpfx Akezrxbujnjgr Ram adjustment: 150 mm Stroke rate: 20 - 150/min Working height: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm The machine is currently not operational.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Pgodpfx Akezrwzajnjr Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Pgodpfozrwypsx Aknsr Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 04/2024, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 9, total length: 5,981 mm, total width: 2,474 mm, total height: 2,546 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4880.TZ24.PY77353---- Errors and omissions excepted! SPECIAL EQUIPMENT Interior fittings: Side windows, rear, left and right * Headliner, grey - with soundproofing mat * MobileFlex floor system - 10 grid rails with a pitch of 122mm - safety flooring * Underbody preservation * Bi-Xenon headlights with static cornering lights, LED daytime running lights incl. automatic headlight leveling * Windows: Side window, 2nd row, fixed, right incl. right sliding door * Heated rear window wiper incl. digital interior mirror with full-screen display * Air conditioning, front and rear incl. water heater in the rear * Navigation system in connection with Technology Package 13 - incl. automatic climate control - Ford audio system with 12-inch multi-function display and Ford SYNC4 - Bluetooth, hands-free system with voice control - Music playback with voice control - Integration of storage media (USB, MP3 player) - FordPass Connect incl. Wi-Fi hotspot, control of selected functions with the FordPass app - Emergency Assistance - Ford Power-Up, Android Auto, Apple CarPlay * Seat package 4A: Driver's seat, 4-way adjustable - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height-adjustable - Table integrated into the double passenger seat (fold-out) - Seat heating for driver and passenger (outer seat) - Interior armrest for driver - Manual lumbar support (driver's seat) - Passenger and side airbags and head-shoulder airbags in the front - Seat upholstery: partial leather upholstery * Auxiliary heater package 1: Auxiliary heater (fuel-powered auxiliary heating), programmable, incl. remote control - incl. cold start package (-29 degrees) * Technology package 13 (4x4): Heated windshield - Windshield wipers with rain sensor - Park Pilot system, front and rear - Active emergency brake assist (radar-based) - Lane Keeping Assist with Driver Alert and Automatic High Beam - Headlight Assist with Day/Night Sensor - Adaptive Cruise Control - Rear view camera - LED downlight - Fog lights - Exterior mirrors, electrically adjustable, foldable and heated OTHER EQUIPMENT * 1 battery * Axle load increase - front to 1850 kg * Airbag, driver's side * All-wheel drive * ABS with electronic brake force distribution - ESP with traction control - Hill start assist - Crosswind assist - Safety Brake Assist - Roll-over protection - Emergency brake assist incl. hazard warning flashing - additionally with trailer stabilization only in connection with trailer coupling (surcharge applies) * Battery: Battery runtime, programming of battery runtime to 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Roof, medium * Double-wing rear door with 180° opening angle (without window) * Electric windows - with quick-down/up function for driver's side * Ford Easy Fuel - comfort fuel filler and misfueling protection * Generator * Glove compartment with lockable lid * Interior lighting with delay function with reading lamps in the front * Fuel tank, 70 l * Cargo area lighting * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key Psdpfx Akeymh U Ujnjgr * Emergency Assistance * Particulate filter: Diesel particulate filter * Wheels: Light alloy wheels 6.5 J x 16 in 10-spoke design * Wheels: Tire repair kit * Headlights, low beam: Halogen headlights with daytime running lights * Sliding door entry li

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 09/2024, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 8, total length: 5,981 mm, total width: 2,474 mm, total height: 2,533 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4243.TZ24.PY79141---- Errors and prior sale are subject to change! SPECIAL EQUIPMENT Interior: Rear side windows left and right * Headliner, gray - with soundproofing mat * MobileFlex floor system - 10 grid rails with a pitch of 122mm - safety floor covering * Underbody preservation * Bi-Xenon headlights with static cornering lights, LED daytime running lights incl. automatic headlight range adjustment * Windows: Side window, 2nd row, fixed, right incl. right sliding door * Heated rear window wiper incl. digital rearview mirror with full-screen display * Air conditioning front and rear incl. water heater in the rear * Navigation system in connection with Technology Package 13 - incl. automatic climate control - Ford audio system with 12-inch multi-function display and Ford SYNC4 - Bluetooth, hands-free system with voice control - music playback with voice control - integration of storage media (USB, MP3 player) - FordPass Connect incl. WLAN hotspot, control of selected functions with the FordPass app - Emergency Assistance - Ford Power-Up, Android Auto, Apple CarPlay * Seat Package 4A: Driver's seat, 4-way adjustable - double passenger seat with storage compartment under individually liftable seat cushions - headrests, height-adjustable - integrated tablet in the double passenger seat (foldable) - seat heating for driver and passenger (outer seat) - interior armrest for driver - manual lumbar support (driver's seat) - passenger and side airbags and head/shoulder airbags in front - seat upholstery: partial leather upholstery * Auxiliary Heater Package 1: Auxiliary heater (fuel-powered auxiliary heater), programmable, incl. remote control - incl. cold start package (-29 degrees) * Technology Package 13 (4x4): Heated windshield - windshield wipers with rain sensor - Park Pilot system front and rear - Active emergency brake assist (radar-based) - Lane Keeping Assist with drowsiness detection and automatic high beam control - Headlight assistant with day/night sensor - Adaptive cruise control - Rear view camera - LED downlight - Fog lights - Exterior mirrors, electrically adjustable, foldable and heated ADDITIONAL EQUIPMENT * 1 battery * Axle load increase - front to 1850 kg * Airbag, driver's side * All-wheel drive * ABS with electronic brake force distribution - ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake assist incl. emergency brake light - additionally with trailer stabilization only in connection with trailer hitch (surcharge) * Battery: Battery run time, programming the battery run time to 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Roof, medium * Double-wing rear door with 180° opening angle (without window) * Power windows - with quick-up/quick-down function for the driver's side * Ford Easy Fuel - comfort fuel filler flap and misfueling protection * Generator * Glove compartment with lockable lid * Interior lighting with delay function with reading lights in front * Fuel tank 70 l * Cargo area lighting * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency Assistance * Particulate filter: Diesel particulate filter Pgsdsup Nvkjpfx Aknor * Wheels: Alloy wheels 6.5 J x 16 in 10-spoke design * Wheels: Tire repair kit * Headlights: Halogen headlights with daytime running lights * Sliding

Year of construction: 2006, condition: used, No. 10036 Screw conveyor with feed hopper Van Beek KS250 Used, year of construction 2006 According to our customer / the previous owner, the machine is fully functional and can be viewed on site Pjdezltwqepfx Aknsgr Stationary screw conveyor with feed hopper / dosing hopper / storage hopper for the controlled discharge and onward conveying of lightweight bulk materials and piece goods Hopper volume approx. 2 m3 Conveying capacity approx. 2 m3/h Screw diameter approx. 248 mm Screw pitch approx. 250 mm Screw speed approx. 10 rpm Labyrinth seal Motor power 3 kW Protection rating IP54 Chain drive Transport dimensions approx. 2800 x 1500 x 2125 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Pjdpfxev Sy Sfe Aknegr Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm Psdpfxovxkv Us Aknsgr - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: ready for operation (used), Seidel 65WKS-CE310/26-PB servo amplifier SN:650230304, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Podpfx Aszgr Aujknegr

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Podpfx Ajibh S Hsknogr Equipped with a ladder.

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. Pjdpfeywtxbsx Aknjgr This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, Included in the delivery: 01x Pallet rack beam, used Material color: yellow Beam type: 7BB Box profile: 120 x 50 mm Design: End beam Bracket: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Psdoy Nxf Djpfx Aknjgr Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These costs depend on the delivery location and scope of delivery and can be requested from us separately.

Condition: excellent (used), Year of construction: 2017, Power 13 KW clamping range 500 mm voltage 400 V Pgedpfx Asxx A D Hekner

Year of construction: 2008, condition: excellent (used), Power 13 KW Pgodpfx Asxx A Edjknsr clamping range 500 mm voltage 400 V