Used Mb Bauerle Cas 35 for sale (17,287)

Condition: used, machine/vehicle number: 005854, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Hnodpev Hinxofx Apnsl Max Panel Width: 3300 mm Max feed speed: 30 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, mileage: 139,104 km, power: 100 kW (135.96 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 800 kg, first registration: 06/2020, emission class: euro6, For information Hsdpfxsyuxhuj Apnjnl

Condition: used, maximum load weight: 28,540 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2018, loading space length: 10,600 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, loading space volume: 56 m³, Year of construction: 2018, Equipment: ABS, Kempf 3-axle body, 56m volume, dimensions 10.60m x 2.43m x 2.20m, combination doors, 1/2 hinged doors, 2x grain pusher 40x40cm, automatic pneumatic 4-hook locking, rubber seal (grain-tight version), dust bag/trischter, catwalk, roller tarpaulin, air suspension, lift axle, SAF axles, disc brakes, Alcoa aluminum rims, support legs, 2x toolbox, EBS, ABS Gross vehicle weight 35,000Kg (technically possible 38,000Kg) / unladen weight 6,460Kg / payload 28,540Kg 1st hand Hnjdpfsw I I Dlex Apnjl

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,600 mm, conveyor belt width: 600 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, L=360cm W=60cm Hsdpeyf Nk Iefx Apnenl H=100cm

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. Hnodpfx Ajxabm Njpnol - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left Hodpfx Ajxabl Sspnonl - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Hnedoxaatnspfx Apnol Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of Hodpfoxaafqjx Apnonl 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: ready for operation (used), Year of construction: 2012, total width: 4,650 mm, total height: 1,660 mm, product length (max.): 15,000 mm, table load: 1,000 kg, number of axes: 3, This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details. Hnsdpfsyrf Szsx Apnjl • Table size: 2,500 x 13,000 mm • Cutting area: 2,700 x 12,950 mm • Table height: 700 mm • Max material thickness: 125 mm • Plasma generator: ESAB Precision Plasma M3 Gen 2, 360 A • Plasma torch: PT 36 • Gas torch: Cool Jet (1 unit) • Control system: CNC Vision 51 • Power supply: Machine 1 x 230 V 50 Hz; Plasma 3 x 400 V 50 Hz • Operating hours: • Plasma torch: 2,795 h • Gas torch: 1,979 h • Gantry and drive: • High-performance cutting gantry • Linear control, AC motor drives, double-sided rack and pinion • Positioning speed max. 24,000 mm/min • Continuous gantry position monitoring • Plasma and gas cutting: • Plasma gases: Technical air, N₂, O₂, H35 • Max piercing: 40 mm (CS/SS/Al) • Cutting speed (CS): 12 mm – 4,200 mm/min; 25 mm – 2,000 mm/min; 38 mm – 1,000 mm/min • Automatic piercing, capacitive height control • HF start system • Cutting quality: ISO 9013 Class 3 • Protection and environment: • Dust protection: IP54 • Relative humidity: 10–85% (no condensation) • Dimensions and installation: • Cutting table: 17-section Additional equipment • Filter unit: ECO 16 CT (extraction/filtration)

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 600 kg, first registration: 05/2025, emission class: euro6, number of seats: 7, Equipment: cruise control, KM0 Hnodpfsy Idq Nex Apnel For information

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are Hnsdpfxjxrb Rfs Apnol inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: MB, Router mbnet mini -Type: MDH 860 -Voltage: 12-24 V -Dimensions: 95/70/H35 mm Hnodpfx Ajyhnc Iepnsl -Weight: 0.4 kg

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Technical data  Brewhouse capacity: 500 L Configuration: 3 kettles + hot water tank + cold water tank + boiler Steam heated Cooling capacity: 35.8 kW Scope of Delivery  Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler Steam Generator | GG-Technik | TD9 | 2016 | 5 kW Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel Compressor | CompAir | WinVOM L15 7.5 | 2001 | — Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel Air Dryer | — | E2000 | 2001 | Air drying unit Hjdpfx Apoyg R Dlonjnl

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! Hnedpfjy Exdxox Apnel TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

Condition: used, This listing is for a CAS BioMAT Class 2 Microbiological Safety Cabinet. The unit is in full working condition and is ready for immediate release. The BioMAT 2 combines decades of expertise in containment design to offer a range of Class 2 microbiological safety cabinets that prioritize safety, ease of use, and energy efficiency. It provides protection for operators and products while handling biological agents up to Hazard Group 3. Key Features: - User-Friendly Interface: Equipped with a 10cm x 6cm TFT touchscreen displaying real-time cabinet operations and an animated airflow diagram. Intuitive controls with crystal-clear iconography simplify functionality, while a four-digit password ensures security. - Energy Efficiency: Features energy-efficient EC fan technology and low-loss filters, consuming only 140W under typical operational performance (0.6 m/sec inflow and 0.35 m/sec downflow). The set-back mode reduces energy usage by automatically adjusting settings when the cabinet is unattended. - Safety Mechanisms: Full-width LED lighting provides clear indications of any airflow issues, supported by audible alarms and large red LED alerts for malfunctions. The animated airflow diagram gives instant feedback on cabinet status. Hnjdpfx Aoxxyctepnjl - Quiet Operation: Designed with EC fans and noise reduction technology, the typical noise level is just 49dBA for the 1200mm models, ensuring a comfortable work environment. - Sustainability: The BioMAT 2 has achieved CarbonNeutral® product certification, contributing to laboratory carbon reduction goals. Product Specifications: - Construction: - Cabinet: 1.5mm mild steel - Inner Liner: Grade 304 stainless steel - Side Windows: 5mm UV-resistant toughened glass - Front Visor Options: - Fixed 200mm aperture with a night door for fumigation. - Aerosol-tight motorized sliding sash with anti-trap reverse function (BioMAT 2-S2). Exhaust Options: - Standard Exhaust: Single HEPA filter with anti-blowback damper. - Thimble Exhaust: Double HEPA filters for enhanced safety. - Recirculation: Double HEPA filters with options for vertical or horizontal air discharge. - Worktrays: Made from grade 316 stainless steel, available in single or divided sections to meet user needs. - Support Stands: Options include fixed height, manually adjustable, or fully DDA-compliant motorized stands. Applications - The BioMAT 2 is ideally suited for laboratories handling biological agents and provides a flexible design tailored to specific laboratory requirements.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Lücht & Palm Type: MB Note: Due to the hot-dip galvanized finish, the racks are suitable for outdoor use. Scope of delivery includes: 16x Pallet Rack Uprights, used Material finish: hot-dip galvanized Frame profile dimensions: U 120 x 50 x 5 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (welded truss construction) Height: 4,000 mm Depth: 900 mm 59x Pallet Rack Beams, used Material finish: hot-dip galvanized Profile: IPE 120 x 64 mm Clear span: 5,015 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 16x Frame Connectors, used Material finish: hot-dip galvanized Profile: L 40 x 40 x 4 mm Clear width: 200 mm 64x Anchor Bolts, new Manufacturer: Hilti Model: HST2RM12x105/10 Design: Stainless steel 32x Shims, used Finish: galvanized For leveling the rack uprights installed on uneven floors 01x Load Sign With field and bay load information, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Incl. mounting material Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Hsdpoult Szjfx Apnsnl Mr. Falk Deutsch General information about the item: This item is offered for collection only. If you require transport or shipping beyond this, additional costs will apply, which can be quoted individually depending on the delivery location and scope of delivery.

Condition: new, We offer you here a new pallet rack traverse for sale. Due to the hot-dip galvanized surface these traverses are suitable for outdoor use. Technical data of the pallet rack traverse: Shelving system: Lücht & Palm Type: MB Included in delivery: 01x pallet rack traverse, new Material colour: hot-dip galvanized IPE profile: 120 x 60 mm Execution: head traverse Agraffe: 2 HK (hooks) clear width: 1.800 mm max. load per truss pair 3,600 kg, with evenly distributed load Hnodohg Tkkepfx Apnel 1x set HV-set EN14399-4 - EN14399-6 10.9 Hexagon bolt with nut and washers and washers for HV-connection Material colour: hot-dip galvanized These cross beams have an upstand welded on for the for the storage of shelf grids. (Height: 40 mm / Material thickness: 4 mm)

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank Here we offer you a used load distributor of the manufacturer Dexion for purchase. These can also be used for other manufacturers. The load distributors are designed for a shelf life of 800 mm suitable. Included in the scope of delivery: 01x load distributor, used Hodpfx Apsdvad Eonsnl Material colour: completely galvanized Total length: approx. 980 mm C-profile dimension: approx. 185 x 35 mm Opening for shelf feet: approx. 115 mm Weight / piece: approx. 10,074 Kg To distribute the field loads over a larger area. Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: used, Bäuerle universal tool grinding machine for woodworking and metalworking tools. Hsdoxytmuspfx Apnsnl

Condition: good (used), functionality: fully functional, Year of construction: 1980, operating hours: 6,000 h, power: 92 kW (125.09 HP), motor manufacturer: Mercedes, gearing type: mechanical, fuel type: diesel, maximum speed: 40 km/h, first registration: 11/1980, next inspection (TÜV): 11/2026, color: light green, machine/vehicle number: 44316100011477, Equipment: additional headlights, cabin, hydraulics, For sale: MB Track in top condition. Brakes, MOT, and oils all newly serviced. Drives perfectly. Gross price: €62,135. VAT is not deductible. Hodpov U Nxtsfx Apnonl

Condition: excellent (used), For sale: Industrial electric motor by renowned manufacturer KSB Aktiengesellschaft. Hnodsyvi Hfopfx Apnjl The motor is in good technical condition and fully operational. It features a robust construction and is designed for demanding industrial applications. Technical specifications: Manufacturer: KSB Type: 1LA7163-4AA66-ZX77 Power: 11 kW Supply: 3~ 400/690 V Frequency: 50 / 60 Hz Speed: 1460 rpm (50 Hz) Protection class: IP55 Insulation class: F Mounting: IM B35 (flange + feet) Cos φ: approx. 0.84 Weight: approx. 85 kg Condition: Used Fully functional Normal signs of use (visible in the photos) Good condition

Condition: new, Year of construction: 2025, Suction nozzle diameter: 350mm maximum volume flow: 8000 m³/h nominal volume flow: 6927 m³/h negative pressure: 2600 Pa at 21,4 m/s in dusty condition Volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 72 db Chaff bag volume: 640 l Filter cleaning: mororic Engine power: 11 kW Hnsdpfx Aspfat Tspnjl Extinguishing device: yes Machine length: 4165 mm Machine width: 1270 mm Machine height: 2595 mm Weight: 900 kg

Condition: ready for operation (used), Year of construction: 2020, Wittmann Battenfeld N-CPR Angle Conveyor Belt 2021 Part holding length: 2300 mm Rising belt length: 2250 mm Belt width: 400 mm Total width: 450 mm Hnedpoywudrjfx Apnjl Year of manufacture: 2020 You are welcome to visit for an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT ID number is submitted. Subject to prior sale. Visit our shop and check out our other offers. Specified company names and trademarks are property of their respective owners and are used solely for identification and description of the products. Deviations from the technical data as well as errors in the description of the item are possible and reserved.

Condition: ready for operation (used), Year of construction: 2020, Wittmann Battenfeld N-CPR angled conveyor belt Part receptacle length: 2300 mm Inclined conveyor section: 2250 mm Hnjdpjywuaysfx Apnol Belt width: 400 mm Total width: 450 mm Year of manufacture: 2020 You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data as well as errors in the article description are possible and remain reserved.

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry Hnedpfx Apjxaac Aenel When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control