Used Mesh Masz Mk200Z for sale (1,364)

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosoling System Application: This combination of padding and drying unit has proven to be highly effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Drying Unit THN If all of the aforementioned applications are to be guaranteed, and the use of needle frames is also desired during individual operation of the drying unit, the THN model is preferred. The standard needle frames are suitable for a sample size of max. 50 x 50 cm (larger needle frames are available upon request). If all of the above applications are to be guaranteed and the use of needle frames is also desired for stand-alone operation of the drying unit, the THN model is preferred. The standard needle frames are suitable for samples up to a size of 50 x 50 cm (larger needle frames are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, meshes, non-woven fabrics, etc., as well as clamping frames for foils and paper, are available. Drying Chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the drying unit. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle chamber. A control flap allows the ventilation to be evenly regulated from above and below, or the air flow to be regulated from above or below. Fan and Heater A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating output, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance effort and increases the operational safety of the drying unit. The heating output is designed for rapid heating and is automatically reduced after the desired temperature is reached, in order to avoid unnecessary power surges. The temperature is electronically controlled in the range of 20–250 °C. Fresh air is directed directly into the circulating air fan via a fan. The desired air flow can be adjusted via a step switch. Technical Data Dcsdpfou D Arijx Apbsn Air velocity approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Heating output approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Dimensions (L x W x H): 4800 x 1380 x 1750 mm Purchase price: €86,275 More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, machine/vehicle number: D456T10385A, Year of construction: 2026, load capacity: 1,400 kg, lifting height: 4,620 mm, free lift: 1,518 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, empty load weight: 1,040 kg, total length: 1,933 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Chassis number: D456T10385A Load center: 600 Fork width: 185 mm Fork thickness: 55 mm Mast type: Triplex Condition: New Technical condition: New Front tire type: Vulkollan Front tire size: 230 x 70 Front tire condition: New Rear tire type: Polyurethane Rear tire size: 85 x 100 Rear tire condition: New Battery voltage: 24V Battery Ah: 210Ah Battery manufacturer: Midac Aquamatic Battery type: PzS Battery year of manufacture: 2026 Battery condition: New Description: Start via key switch, standard version, battery removal from above, lifting frame protection made of wire mesh, 1-function hydraulic valve, proportional lifting/lowering control on the tiller head Full free lift, CE certificate. Dcjdpfx Aoyng N Hjpben

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - max. cutting height: 120mm - roller width: 510mm - roller diameter: 75mm Djdpozxrd Nefx Apbjcn - max. saw blade diameter: 400mm – Top: - feed fingers/ejectors, 2 rows - driving roller, toothed - driving roller, toothed, outfeed – Bottom: - feed fingers/ejectors - 2 driving rollers, toothed - saw blade roller - driving roller, toothed, outfeed - 6 feed speed settings - hydraulic motor (feed, infeed, rollers): 3kW - main motor: 22kW - stepless feed speed adjustment - control panel stand dimensions: 700x600x1000mm - overall dimensions (L/W/H): 2300x1450x1600mm - weight approx. 2650kg ADVANTAGES - Made in Turkey - Robust construction - Used machine, very good condition Net price: 37900 PLN Net price: 8800 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary with larger fluctuations)

Condition: used, Year of construction: 2006, Overview This Tetra Pak Tetra Fino Aseptic filling line, manufactured in 2006, is designed for the filling of UHT milk and other liquid food products in pillow-shaped aseptic cartons (Tetra Fino® 1000 ml format). The system enables aseptic filling of ultra-pasteurized products, allowing extended shelf life without refrigeration. With a capacity of approx. 3,600 packs per hour, the line is suitable for small to medium-capacity dairy production. The line consists of a bag forming and filling machine, conveyor systems, and a carton closing module, with manual packing into boxes. The equipment is currently in production and reported to be in good condition. Technical data - Manufacturer: Tetra Pak - Machine type: Aseptic carton filling line (pillow pack) - Format: Tetra Fino Aseptic 1000 ml - Year of manufacture: 2006 - Operating hours: approx. 18,625 h - Capacity: approx. 3,600 packs/h - Filling stations: 1 - Filling system: tbc - Filling type: Aseptic filling Dedpfxey Sh Tvj Apbocn - Product: UHT milk (example: 137°C / 4 sec) Suitable for liquid food products Equipment - Aseptic filling machine (bag forming from roll) - Conveyor system for package transport - Conveyor system for carton handling - Manual packing station (bags into cartons) - Automatic carton closing module (SOCO System, year 2014, approx. 740 h) - 1 m mesh conveyor (outfeed for full cartons) - Roll handling trolley (for heavy packaging rolls) - Aseptic filling valves (ABC Valve)

Condition: used, Year of construction: 2006, Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data - Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab - Model: Octopus 1800 BFTS - Machine Type: Automatic ring pallet wrapper Dcjdpfx Aezb Azfepbon - Year of Manufacture: 2006 - Application: Stretch wrapping of palletized goods - Wrapping System: Horizontal ring wrapping system - Product Transport: Integrated motorized roller conveyor - Electrical Supply: 3 x 400 V - Operating Current: 20 A - Control Interface: Siemens SIMATIC Panel - Conveyor System: Roller conveyor through wrapping area - Construction: Heavy-duty steel gantry frame with yellow ring wrapping assembly - Location in Line: Palletizing / end-of-line packaging area - Condition: Used, installed in industrial production environment

Condition: new, Grid back panel for pallet racking, new Manufacturer: Garantell - Protection against falling goods - Easy to assemble - Complete delivery including all accessories - For indoor use According to drawing (see images) Mesh size: 50x50 Width: 47,000 mm Height: 4,000 mm Supports: 17 Walls: 1 Surface treatment: Wire and band hot-dip galvanized with a zinc coating of ~7 μm before the welding process. Included in delivery: Connector for back panel: 42 pieces consisting of: - Fastener, back panel grid: 42 pieces - Self-drilling screw 4.2x13, galvanized: 168 pieces - Flange nut M8, galvanized: 84 pieces - Flange screw M8x20, galvanized: 84 pieces Fastener for mounting from the outside, back panel grid: 44 pieces consisting of: - Mounting fastener: 176 pieces - Metal screw: 4.8x13: 352 pieces Bolt package for console, M8x25: 51 pieces consisting of: - Flange nut M8, galvanized: 102 pieces - Flange screw M8x20, galvanized: 102 pieces - Washer 8.4x25x2, galvanized: 102 pieces Product catalog/Assembly instructions: 1 piece Panel (HxW) 2,200x2,000 Mesh 50x50, Ø 3.00x4.00: 41 pieces Panel (HxW) 800x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece Panel (HxW) 1,100x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece Panel (HxW) 1,900x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece Front bracket 250 mm: 51 pieces Consisting of packages: 1 piece W 300mm x D 2130mm x H 2,074mm, 157 kg 1 piece W 800mm x D 2060mm x H 2,374mm, 850 kg 2 pieces total Note: This grid back panel is being sold as part of a customer order cancellation and is therefore offered at a reduced price. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Djdpezdiwgjfx Apbscn

Condition: good (used), Technical specifications for the side panel: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x mesh side panel, used Material color: light silver lacquered for frame depth: 600 mm for frame height: 2,490 mm Item: SWG 3625 Dimensions: 2,485 x 450 mm Mesh size: approx. 50 x 50 mm Note: Mounting brackets are not included in the scope of delivery. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Djdpfx Apjylt Udebscn Mr. Falk Deutsch General product information: This item is offered only for collection. Should transport or shipping of this item be required, additional costs will apply. Please contact us to inquire about delivery costs, which vary depending on delivery location or scope of order.

Condition: good (used), The scope of delivery includes: 1x welded grating, used Material color: hot-dip galvanized Total depth: approx. 2,460 mm (support bar direction) Total width: approx. 1,130 mm (cross bar direction) Support bar: TS30/2.00 Frame height: approx. 30 mm Mesh width: approx. 35 x 40 mm Weight per piece: approx. 49.61 kg Internal designation: GR-126 Note: - 2 L-bracket welded on each side for locking - The grating may have damage, scratches, and dents. Your contact person in our company: Dcjdpjwl U S Sofx Apbsn Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), m Scope of delivery includes: inserted grating, used Material color: hot-dip galvanized Total depth: approx. 1,030 mm (support bar direction) for stand depth: approx. 1,050 mm Total width: approx. 1,335 mm (cross bar direction) Clear span: approx. 942 mm Dodpfx Apevqa U Robjcn Mesh width: approx. 68 x 45 mm Support bar: TS30/1.80 Support: approx. 45 mm Internal designation: GR-97 Weight / piece: approx. 18.47 kg Note: The grating may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: as good as new (ex-display), Remark: Dedpfxsn Tprnj Apbecn This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Application: suitable for laid gratings for mesh size approx. 33 x 33 mm Included in delivery: 01x clamp fastening, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 100 x 32 x 15 mm (LxHxW) 01x bracket, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 50 x 25 mm 01x threaded rod M8, II. choice (virgin material) total length: approx. 100 mm 01x square nut M8, II. choice (new goods) Material color: hot-dip galvanized Total weight: 0,120 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Dedpfxoyk Ip To Apbocn Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability Dcodpezxnu Dsfx Apbsn - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 642 mm, Rear tipper by manufacturer Unsinn, model WEB HK 2715-26-13. Gross weight: 2,600 kg, flatbed, open box, overrun brake, rear tipper with hand pump. • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Anodised double-wall aluminium side panels • All side panels foldable and removable • Removable steel corner posts • Attachment options in all four corners for tarpaulin frames, mesh extensions, sidewall extensions, or front wall height extension • Recessed long lever locks • 3 mm fully galvanized steel floor – extremely robust • Drawbar and frame of hollow profile construction, welded and fully hot-dip galvanized • Numerous cross members for high point loading capacity • All cross and longitudinal members in contact with the floor • 6 folding lashing recesses, flush-mounted in the floor frame profile (600 daN/kg) • 6 lashing rings underneath the cargo floor • Sturdy 3-stage hydraulic cylinder Dcsdpfx Aeyn Uhwjpbon • Manual hydraulic pump • Maintenance-free rubber suspension axles by ALKO • Automatic reverse function • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large, heavy-duty safety lighting • Integrated rear fog lamp • Recessed rear frame lighting • Centre-position jockey wheel with clamp bracket Errors and prior sale excepted.

Condition: new, overall weight: 1,300 kg, loading space length: 2,650 mm, loading space width: 1,610 mm, Lowering system from trailer manufacturer VEZEKO, model HUSKY FB13.28. A lowering trailer makes it easy to load vehicles. The platform is raised by a standard manual hydraulic system and lowered by opening the valve on the hand pump. This allows pallets, lawnmowers, machinery, motorcycles, quads, and ATVs to be easily driven onto the car trailer. The standard equipment of the Senkomat includes a manual hydraulic system, drawbar box, lashing eyes, front wheel, robust welded frame with hot-dip galvanization, and a very stable V-shaped drawbar. Detailed equipment and technical specifications can be found below. Dcjdpfxoyq N H Ts Apben We also offer all tilting trailers as tarpaulin trailers and box trailers. Accessories for car trailers such as a motorcycle ramp, motorcycle rail, cover, side rail extension, mesh extension, motorcycle tie-down straps, straps, shock absorbers, TÜV approval for 100 km/h, and a trailer lock are also available. Technical data: Internal dimensions L x W x H: approx. 265 x 161 x 10 cm; the loading ramp extends the open loading area by approx. 30 cm. Overall external dimensions L x W x H: approx. 425 x 227 x 80 cm. Total weight: 1300 kg with brakes Unladen weight: approx. 380 kg Payload: approx. 920 kg Loading area height: approx. 45 cm

Condition: used, mileage: 147,773 km, power: 130 kW (176.75 HP), first registration: 09/2018, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 6,204 mm, total width: 2,098 mm, total height: 2,330 mm, loading space length: 270 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Special Equipment: * Storage Package 2 * Composition Audio system (radio, SD card interface, MP3 playback function) * Exterior mirrors electrically adjustable and heated * On-board tools and jack * Chassis: reinforced shocks and stabilizers, front and rear * Metallic paint finish * Front ladder rack with protective bulkhead mesh * Spare wheel with road-going tire * Rear wall with window * Rear mud flaps * Seat covers/upholstery: artificial leather * Cab seats: double passenger seat with storage compartment and folding backrest as table * Cab seats: comfort driver's seat * Auxiliary water heater with stationary heating function and remote control Additional Equipment: * Driver's airbag * Exterior mirror convex, left * Exterior mirror convex, right * LED indicator lights integrated into exterior mirrors * Rubber flooring in cab * Dual headlights * Dual-tone horn * Driver assistance system: hill-start assist * Driver assistance system: brake assist (HBA) * Electric front windows * Laminated windshield * Grab handles A-pillars * Interior lights in cab: LED * Body: Double cab dropside, standard * Fuel tank: 75 liters * Radiator grille with upper chrome trim * Steering column (steering wheel) adjustable * Headlight range adjustment Dedpfx Apjzz U Agebecn * Truck approval * Side marker lights * Engine 2.0 L, 130 kW TDI * Multi-function display Plus * Rear fog light * Wheelbase 3640 mm * Low emission according to Euro 6 * SCR system (AdBlue technology) * Electro-mechanical power steering * Seats in load/passenger compartment: first row * 4-seater bench (double cab) * Steel rims 6.5x16 * Engine start/stop system * Front bumper in grey with vehicle color trim * Seat belt warning system (driver’s side) * Heat-insulating glazing * Central locking with remote control and interior operation * Perm. gross weight 3.50 t All information without guarantee.

Condition: used, manufacture diverse We offer: Spare parts package for Index R300 Dcsdpfx Apjzz S I Hebsn 1 wire mesh container (L 1.2 m x W 0.8 m x approx. H 1.4 m) An overview in Excel format can be provided upon request. Sold without warranty or guarantee.

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - max. width of workpiece 230mm - min. width of workpiece 15mm - max. height of workpiece 160mm - min. height of workpiece 10mm 7 spindles: 1) horizontal lower 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) horizontal upper 230mm 7.5kW 6) horizontal upper 230mm 7.5kW 7) horizontal lower 230mm 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - motor 2 x 0.37kW - spindle diameter 40mm - all spindles equipped with a brake from above: - 8 feeding rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, pulling, rubber, double from below: - feeding roller, toothed, pulling, pivoting - 3 discharge rollers, pulling, metal, smooth - rollers are pneumatically pressed - length of the feeding table 2480mm - central lubrication of the table - electric adjustment of planing thickness Dcjdpfxozab Nfo Apbsn - motor for lifting the housing 0.56kW - stepless feed speed adjustment on an inverter 6-24m/min - feed motor 3.7kW - feed on Cardan shafts - diameter of the dust extraction nozzle 7x125mm - dimensions L/W/H 5520x1930x1900mm - weight approximately 4000kg ADVANTAGES - for 7 heads - ideal for wet and dry wood - with ATS - original DTR + CE documentation - unpainted - used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 36500 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number 7994 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 130mm 7 spindles: 1) horizontal lower 230mm, 4kW 2) vertical right 130mm 3) vertical left 130mm (spindles 2 and 3), 11kW 4) horizontal upper 230mm, 5.5kW 5) horizontal upper 230mm, 5.5kW Spindles 4 and 5 are electrically adjustable up/down 6) horizontal lower 230mm, 4kW 7) universal 230mm, adjustable at 360°, 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 infeed rollers, toothed, from above - 4 outfeed rollers, rubber, smooth, including 3 double rollers, from above - 1 metal roller, from below - feed on cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment via frequency inverter - feed motor 3kW - operating pressure 6-10 bar - electrical adjustment of planing thickness - central lubrication of the table - length of infeed table 1960mm - diameter of dust extraction nozzles 3x120mm, 4x140mm Dodpfxjzrk Uae Apbocn - dimensions L/W/H 5360x1800x1660mm - weight approximately 4000kg ADVANTAGES - German production, WEINIG brand - with 7 heads - DTR documentation - universal spindle - used planer, very good condition Net price: 75900 PLN Net price: 17660 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - Max. width of the workpiece: 240mm - Max. height of the workpiece: 130mm - 6 spindles: 1) Horizontal lower, 240mm, 7.5kW 2) Vertical right, 130mm, 5.5kW 3) Vertical left, 130mm, 5.5kW 4) Horizontal upper, 240mm, 7.5kW 5) Horizontal upper, 240mm, 5.5kW Dcsdpfxsztzhge Apben Spindles 4 and 5 are adjustable up/down electrically 6) Horizontal lower, 240mm, 5.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm *Top: - 8 feed rollers, metallic, toothed, including 3 double rollers - 4 delivery rollers, smooth, rubber, including 2 double rollers *Bottom: - 3 feed rollers, smooth - 3 side pressure rollers - Infinitely variable feed speed adjustment via frequency inverter - Pressure rollers pneumatically actuated - Feed motor: 7.5kW - Feed on Cardan shafts - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Length of the infeed table: 2480mm - Pneumatic opening/closing of the hood - Pneumatic blowing of the table - Central lubrication of the table - Diameter of the dust extraction nozzles: 3x120mm, 3x150mm - Dimensions (L/W/H): 5300x1700x1800mm - Weight: 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the hood - Pneumatic blowing of the table - Spindles 4 and 5 are adjustable electrically - Used planer, very good condition Net price: 99900 PLN Net price: 23240 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm - Knife size: 40x40 mm - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg ADVANTAGES – German-made – Not repainted – Very good condition – Used shredder Net price: 31,900 PLN Dcsdpfoztat Ijx Apben Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 8018 TECHNICAL DATA - max. blade diameter: 400mm - blade bore diameter: 30mm - blade guard - adjustable blade arm (up/down) - max. cutting height: 100mm - max. cutting width: 540mm - hydraulic blade feed - 2 infeed rollers on the table Dcedpoztqv Hjfx Apbjn - outfeed roller on the table - motor: 3.7kW - hydraulic pump motor: approx. 0.55kW - dust extraction port diameter: 100mm - roller width: 530mm - dimensions of the infeed roller table: 2000x640x910mm - dimensions of the outfeed roller table with scale: 2000x640x965mm - machine dimensions (L/W/H): 1900x1540x1820mm - weight: approx. 750kg ADVANTAGES – manufactured by the Polish brand REMA – technical documentation available – roller tables – very good condition – used saw Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6607 Dodpfx Apszc I Tpebjcn TECHNICAL DATA Circular saw: - max. saw blade diameter 350mm - spindle 30mm - spindle locking - blade adjustable front/back, up/down - blade guard - motor 1.1kW - dust extraction port diameter 80mm Milling machine: Arbor: - spindle diameter 40mm - spindle working height 140mm - spindle locking - max. milling cutter diameter 350mm - 2 speed settings 3000, 4500 rpm - motor 5.5kW - brake - side carriage – manual feed - carriage dimensions length/width 1180x600mm - angle ruler - 2 pneumatic clamps - dust extraction port diameter 120mm - dimensions length/width/height 2600 (for shipping 2000)/1600/1450mm - weight 735kg – very good condition – used milling machine Net price: 13900 PLN Net price: 3233 euros, depending on the exchange rate, 4.30 euros (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Year of construction: 2007, Catalog number 7809 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 900mm - Automatic machine operation - Inspection window in the machine hopper - Equipped with an additional oil heater - Motor: 5.5kW - Dimensions (L/W/H): 1600x1200x1500mm - Weight: 685kg ADVANTAGES – Unpainted – Made in Italy – Equipped with an additional oil heater – Used briquetting machine – Very good condition Dsdpfxjzu Sxxe Apbocn Net price: 36,900 PLN Net price: 8,581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: excellent (used), Catalog number 7979 TECHNICAL DATA - Max. diameter of workpieces 130mm - Fitted sleeve 57mm - Min. length of input material 800mm - Tool head drive motor 18.5kW - 4 types of feed speeds + forward/reverse - Feed motor 2.2kW In sequence: - 6 toothed draw-in rollers - 3-knife tool head - 6 smooth draw-out rollers - Diameter of exhaust outlet 140mm - Additional sleeves included: 40, 45, 50, 75mm - Dimensions (L/W/H) 3100x1300x1400mm Dodpfxszwwwle Apbecn - Weight 2100kg ADVANTAGES - Made in Poland - 3-knife tool head - Additional sleeves included: 40, 45, 50, 75mm - Used lathe, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, CATALOGUE NUMBER: 7650 Technical data: - max. working length: 1500mm - max. working diameter: 250mm - milling (disc milling cutter): 7.5kW - spindle – 2800 rpm, 3kW - spindle speed: 700/1200/1500/2000 rpm - grinding unit: 0.75kW - hydraulic motor: 3kW - total power: 17.75kW - air consumption: 6-8 bar - infeed for square stock up to 150x150mm - dust extraction port diameter: 100mm, 160mm - transport dimensions (L/W/H): 4350x2300x1980mm - weight: approx. 3000kg Dedjztrfcspfx Apbscn ADVANTAGES: - manufactured in Germany - automatic hydraulic copying device - original technical documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 13930 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)